public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
* Re: Linux 2.6.13-rc4
@ 2005-07-29 12:09 Mickey Stein
  2005-07-29 19:01 ` Cal Peake
  0 siblings, 1 reply; 9+ messages in thread
From: Mickey Stein @ 2005-07-29 12:09 UTC (permalink / raw)
  To: linux-kernel

[-- Attachment #1: Type: text/plain, Size: 3251 bytes --]

>
>
> Hey everybody,
>
> as many of you are aware, we were talking (not enough) about the release
> process at LKS this year.
> This ain't it.
>
> This is just the regular old release "process", with some LKS backlog 
> put in for good measure.
> But the good news is, that I'll try the new release process after 2.6.13
> is out, which is hopefully not too far away. Which means that we should
> try to let people know about the fact that if they want to merge stuff,
> they should do so in the first two weeks after the 2.6.13 release, and no
> later (also, no earlier either, by now).
>
> So if you have a favourite kernel developer, please wake him up with a
> friendly kick to the head and explain this concept to him in small
> easy-to-understand words, and tell him that we're in the freeze process
> for 2.6.13 now, and that he should be gathering up the patches, and make
> sure they get to me _after_ 2.6.13 is out, but at that point do it in a
> timely manner.
>
> Ok?
>
> In the meantime, here's the 2.6.13-rc4 update, with a diffstat so 
> horribly
> ugly that I won't even show it (the kernel list would eat it as too big
> anyway), and I'll have to go fix my code that generates it.
>
> Oh, and in case you wonder, it's ugly because a cris architecture update
> with long filenames that really causes git-apply to output som rather
> nasty-looking diffstats  ;)
> ALSA, IB, NTFS, SCSI (qla2xxx) and the cris architecture update.
>
>             Linus
>
>  
>
This is regarding *-rc4 and *-rc4-git1:  I slapped together my favorite 
config and gave it a test run. It had a bit of a problem and ground to a 
halt after spewing these into the log.

I'd say ; right after it did a "modprobe parport_pc". Actually I 
duplicated this today on rc4-git1 after yesterday's same experience with 
-rc4. With the .config file below, I did a grub boot (init 1). The dmesg 
from this was not so different, if at all, from my last working kernel. 
After this, I only did one test, which was a "$modprobe parport_pc" 
which produced the usual hundreds of trace msgs. I could modprobe some 
other modules without problem, i2c, snd_*, etc. The dmesg > 'file' is 
attached below. Config is attached below that.

The only update from trying this yesterday was that with *git1, I did 
the modprobe in a more controlled fashion, and the system didn't hang on 
the modprobe. If I let it continue by doing an init 3, it does 
eventually freeze and I don't get more information of use in dmesg or 
the /var/log/m* file.

I've been quite low on time lately, so perhaps I missed something 
obvious in the notes. When I did the "$make xconfig" , there were no 
warnings about changes or new config params.

The two mentioned files are on as attachments. Some other details:

mainboard: nf7 (abit nforce2 chipset)
last kernel before *rc4 that was running well with the identical config: 
2.6.13-rc3-git7
Using mem=4g and associated parms to get my full 1g.
Version rawhide: Up to date as of yesterday (27-Jul)

If I can find the time tomorrow morning, I'll leave parport_pc commented 
out of modprobe.conf and see if something else pops loose. I don't use 
the parallel port, but I try to keep a fairly robust config for noticing 
bugs.

Mick


--attached files--



[-- Attachment #2: boot_1user_after_modprobe_parport_pc.dmesg --]
[-- Type: text/plain, Size: 15385 bytes --]

:02:00.0
PCI: Discovered primary peer bus ff [IRQ]
PCI: Using IRQ router default [10de/01e0] at 0000:00:00.0
PCI: Bridge: 0000:00:08.0
  IO window: disabled.
  MEM window: eb000000-ebffffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
  IO window: disabled.
  MEM window: e8000000-eaffffff
  PREFETCH window: d0000000-dfffffff
PCI: Setting latency timer of device 0000:00:08.0 to 64
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
fb0: VGA16 VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected NVIDIA nForce2 chipset
agpgart: AGP aperture is 128M @ 0xe0000000
[drm] Initialized drm 1.0.0 20040925
PNP: PS/2 controller doesn't have AUX irq; using default 0xc
PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 112
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 0000:00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: SAMSUNG SP0411N, ATA DISK drive
hdb: SAMSUNG SP0802N, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdd: BENQ DVD DD DW1620, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 78242976 sectors (40060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 < hda5 hda6 hda7 >
hdb: max request size: 1024KiB
hdb: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hdb: cache flushes supported
 hdb: hdb1 hdb2 < hdb5 >
ide-floppy driver 0.99.newide
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard on isa0060/serio0
IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Using IPI Shortcut mode
EXT3-fs: mounted filesystem with ordered data mode.
input: PS/2 Generic Mouse on isa0060/serio1
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 244k freed
kjournald starting.  Commit interval 5 seconds
usbcore: registered new driver usbfs
usbcore: registered new driver hub
hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.35.
PCI: Setting latency timer of device 0000:00:04.0 to 64
eth0: forcedeth.c: subsystem: 0147b:1c01 bound to 0000:00:04.0
gameport: CS46xx Gameport is pci0000:01:09.0/gameport0, speed 864kHz
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5100
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller
ehci_hcd 0000:00:02.2: debug port 1
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.2: irq 3, io mem 0xec004000
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: park 0
ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: nVidia Corporation nForce2 USB Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 10, io mem 0xec002000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 USB Controller (#2)
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.1: irq 11, io mem 0xec003000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
usb 2-2: new low speed USB device using ohci_hcd and address 2
usbcore: registered new driver hiddev
input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
EXT3 FS on hda6, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hdb5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1028120k swap on /dev/hda7.  Priority:-1 extents:1
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
idr_remove called for id=1025 which is not allocated.
 [<c01dfe26>] sub_remove+0x86/0xf0
 [<c01dfea8>] idr_remove+0x18/0x80
 [<c018bf51>] release_inode_number+0x21/0x40
 [<c018c6d5>] free_proc_entry+0x15/0x50
 [<c018c7e4>] remove_proc_entry+0xd4/0x130
 [<c01201f6>] unregister_proc_table+0x76/0xa0
 [<c01201f6>] unregister_proc_table+0x76/0xa0
 [<c01201ae>] unregister_proc_table+0x2e/0xa0
 [<c01201ae>] unregister_proc_table+0x2e/0xa0
 [<c01201ae>] unregister_proc_table+0x2e/0xa0
 [<c01201ae>] unregister_proc_table+0x2e/0xa0
 [<c012002c>] unregister_sysctl_table+0x2c/0x40
 [<f8a49bb6>] parport_device_proc_unregister+0x16/0x30 [parport]
 [<f8a4693d>] parport_unregister_device+0xd/0x190 [parport]
 [<f8a4abb5>] parport_device_id+0x85/0x1e0 [parport]
 [<f8a49d18>] parport_daisy_init+0x78/0x210 [parport]
 [<c0137e6b>] setup_irq+0x9b/0x100
 [<f89a8090>] parport_pc_interrupt+0x0/0x70 [parport_pc]
 [<f8a464b9>] parport_announce_port+0x9/0xc0 [parport]
 [<f89a98c8>] parport_pc_probe_port+0x478/0x630 [parport_pc]
 [<f89aa5b8>] parport_pc_pnp_probe+0xc8/0x130 [parport_pc]
 [<f89aa4f0>] parport_pc_pnp_probe+0x0/0x130 [parport_pc]
 [<c01fd7ff>] pnp_device_probe+0x4f/0xb0
 [<c022ae9b>] driver_probe_device+0x3b/0xd0
 [<c022afd9>] __driver_attach+0x39/0x40
 [<c022a65a>] bus_for_each_dev+0x3a/0x60
 [<c022aff6>] driver_attach+0x16/0x20
 [<c022afa0>] __driver_attach+0x0/0x40
 [<c022aa8b>] bus_add_driver+0x7b/0xd0
 [<c01fd8ee>] pnp_register_driver+0x2e/0x60
 [<f88140dc>] parport_pc_find_ports+0x5c/0x70 [parport_pc]
 [<f8814520>] parport_pc_init+0x90/0x9b [parport_pc]
 [<c01351ff>] sys_init_module+0xbf/0x200
 [<c0102d31>] syscall_call+0x7/0xb
idr_remove called for id=1025 which is not allocated.
 [<c01dfe26>] sub_remove+0x86/0xf0
 [<c01dfea8>] idr_remove+0x18/0x80
 [<c01dfea8>] idr_remove+0x18/0x80
 [<c018bf51>] release_inode_number+0x21/0x40
 [<c018c6d5>] free_proc_entry+0x15/0x50
 [<c018c7e4>] remove_proc_entry+0xd4/0x130
 [<c01201f6>] unregister_proc_table+0x76/0xa0
 [<c01201f6>] unregister_proc_table+0x76/0xa0
 [<c01201ae>] unregister_proc_table+0x2e/0xa0
 [<c01201ae>] unregister_proc_table+0x2e/0xa0
 [<c01201ae>] unregister_proc_table+0x2e/0xa0
 [<c012002c>] unregister_sysctl_table+0x2c/0x40
 [<f8a49bb6>] parport_device_proc_unregister+0x16/0x30 [parport]
 [<f8a4693d>] parport_unregister_device+0xd/0x190 [parport]
 [<f8a4abb5>] parport_device_id+0x85/0x1e0 [parport]
 [<f8a49d18>] parport_daisy_init+0x78/0x210 [parport]
 [<c0137e6b>] setup_irq+0x9b/0x100
 [<f89a8090>] parport_pc_interrupt+0x0/0x70 [parport_pc]
 [<f8a464b9>] parport_announce_port+0x9/0xc0 [parport]
 [<f89a98c8>] parport_pc_probe_port+0x478/0x630 [parport_pc]
 [<f89aa5b8>] parport_pc_pnp_probe+0xc8/0x130 [parport_pc]
 [<f89aa4f0>] parport_pc_pnp_probe+0x0/0x130 [parport_pc]
 [<c01fd7ff>] pnp_device_probe+0x4f/0xb0
 [<c022ae9b>] driver_probe_device+0x3b/0xd0
 [<c022afd9>] __driver_attach+0x39/0x40
 [<c022a65a>] bus_for_each_dev+0x3a/0x60
 [<c022aff6>] driver_attach+0x16/0x20
 [<c022afa0>] __driver_attach+0x0/0x40
 [<c022aa8b>] bus_add_driver+0x7b/0xd0
 [<c01fd8ee>] pnp_register_driver+0x2e/0x60
 [<f88140dc>] parport_pc_find_ports+0x5c/0x70 [parport_pc]
 [<f8814520>] parport_pc_init+0x90/0x9b [parport_pc]
 [<c01351ff>] sys_init_module+0xbf/0x200
 [<c0102d31>] syscall_call+0x7/0xb
idr_remove called for id=1025 which is not allocated.
 [<c01dfe26>] sub_remove+0x86/0xf0
 [<c01dfea8>] idr_remove+0x18/0x80
 [<c01dfea8>] idr_remove+0x18/0x80
 [<c018bf51>] release_inode_number+0x21/0x40
 [<c018c6d5>] free_proc_entry+0x15/0x50
 [<c018c7e4>] remove_proc_entry+0xd4/0x130
 [<c01201f6>] unregister_proc_table+0x76/0xa0
 [<c01201f6>] unregister_proc_table+0x76/0xa0
 [<c01201ae>] unregister_proc_table+0x2e/0xa0
 [<c01201ae>] unregister_proc_table+0x2e/0xa0
 [<c012002c>] unregister_sysctl_table+0x2c/0x40
 [<f8a49bb6>] parport_device_proc_unregister+0x16/0x30 [parport]
 [<f8a4693d>] parport_unregister_device+0xd/0x190 [parport]
 [<f8a4abb5>] parport_device_id+0x85/0x1e0 [parport]
 [<f8a49d18>] parport_daisy_init+0x78/0x210 [parport]
 [<c0137e6b>] setup_irq+0x9b/0x100
 [<f89a8090>] parport_pc_interrupt+0x0/0x70 [parport_pc]
 [<f8a464b9>] parport_announce_port+0x9/0xc0 [parport]
 [<f89a98c8>] parport_pc_probe_port+0x478/0x630 [parport_pc]
 [<f89aa5b8>] parport_pc_pnp_probe+0xc8/0x130 [parport_pc]
 [<f89aa4f0>] parport_pc_pnp_probe+0x0/0x130 [parport_pc]
 [<c01fd7ff>] pnp_device_probe+0x4f/0xb0
 [<c022ae9b>] driver_probe_device+0x3b/0xd0
 [<c022afd9>] __driver_attach+0x39/0x40
 [<c022a65a>] bus_for_each_dev+0x3a/0x60
 [<c022aff6>] driver_attach+0x16/0x20
 [<c022afa0>] __driver_attach+0x0/0x40
 [<c022aa8b>] bus_add_driver+0x7b/0xd0
 [<c01fd8ee>] pnp_register_driver+0x2e/0x60
 [<f88140dc>] parport_pc_find_ports+0x5c/0x70 [parport_pc]
 [<f8814520>] parport_pc_init+0x90/0x9b [parport_pc]
 [<c01351ff>] sys_init_module+0xbf/0x200
 [<c0102d31>] syscall_call+0x7/0xb
idr_remove called for id=1025 which is not allocated.
 [<c01dfe26>] sub_remove+0x86/0xf0
 [<c01dfea8>] idr_remove+0x18/0x80
 [<c018bf51>] release_inode_number+0x21/0x40
 [<c018c6d5>] free_proc_entry+0x15/0x50
 [<c018c7e4>] remove_proc_entry+0xd4/0x130
 [<c01201f6>] unregister_proc_table+0x76/0xa0
 [<c01201f6>] unregister_proc_table+0x76/0xa0
 [<c01201ae>] unregister_proc_table+0x2e/0xa0
 [<c01201ae>] unregister_proc_table+0x2e/0xa0
 [<c01201ae>] unregister_proc_table+0x2e/0xa0
 [<c01201ae>] unregister_proc_table+0x2e/0xa0
 [<c012002c>] unregister_sysctl_table+0x2c/0x40
 [<f8a49bb6>] parport_device_proc_unregister+0x16/0x30 [parport]
 [<f8a4693d>] parport_unregister_device+0xd/0x190 [parport]
 [<f8a4abb5>] parport_device_id+0x85/0x1e0 [parport]
 [<f8a49d18>] parport_daisy_init+0x78/0x210 [parport]
 [<c0137e6b>] setup_irq+0x9b/0x100
 [<f89a8090>] parport_pc_interrupt+0x0/0x70 [parport_pc]
 [<f8a464b9>] parport_announce_port+0x9/0xc0 [parport]
 [<f89a98c8>] parport_pc_probe_port+0x478/0x630 [parport_pc]
 [<f89aa5b8>] parport_pc_pnp_probe+0xc8/0x130 [parport_pc]
 [<f89aa4f0>] parport_pc_pnp_probe+0x0/0x130 [parport_pc]
 [<c01fd7ff>] pnp_device_probe+0x4f/0xb0
 [<c022ae9b>] driver_probe_device+0x3b/0xd0
 [<c022afd9>] __driver_attach+0x39/0x40
 [<c022a65a>] bus_for_each_dev+0x3a/0x60
 [<c022aff6>] driver_attach+0x16/0x20
 [<c022afa0>] __driver_attach+0x0/0x40
 [<c022aa8b>] bus_add_driver+0x7b/0xd0
 [<c01fd8ee>] pnp_register_driver+0x2e/0x60
 [<f88140dc>] parport_pc_find_ports+0x5c/0x70 [parport_pc]
 [<f8814520>] parport_pc_init+0x90/0x9b [parport_pc]
 [<c01351ff>] sys_init_module+0xbf/0x200
 [<c0102d31>] syscall_call+0x7/0xb
idr_remove called for id=1025 which is not allocated.
 [<c01dfe26>] sub_remove+0x86/0xf0
 [<c01dfea8>] idr_remove+0x18/0x80
 [<c01dfea8>] idr_remove+0x18/0x80
 [<c018bf51>] release_inode_number+0x21/0x40
 [<c018c6d5>] free_proc_entry+0x15/0x50
 [<c018c7e4>] remove_proc_entry+0xd4/0x130
 [<c01201f6>] unregister_proc_table+0x76/0xa0
 [<c01201f6>] unregister_proc_table+0x76/0xa0
 [<c01201ae>] unregister_proc_table+0x2e/0xa0
 [<c01201ae>] unregister_proc_table+0x2e/0xa0
 [<c01201ae>] unregister_proc_table+0x2e/0xa0
 [<c012002c>] unregister_sysctl_table+0x2c/0x40
 [<f8a49bb6>] parport_device_proc_unregister+0x16/0x30 [parport]
 [<f8a4693d>] parport_unregister_device+0xd/0x190 [parport]
 [<f8a4abb5>] parport_device_id+0x85/0x1e0 [parport]
 [<f8a49d18>] parport_daisy_init+0x78/0x210 [parport]
 [<c0137e6b>] setup_irq+0x9b/0x100
 [<f89a8090>] parport_pc_interrupt+0x0/0x70 [parport_pc]
 [<f8a464b9>] parport_announce_port+0x9/0xc0 [parport]
 [<f89a98c8>] parport_pc_probe_port+0x478/0x630 [parport_pc]
 [<f89aa5b8>] parport_pc_pnp_probe+0xc8/0x130 [parport_pc]
 [<f89aa4f0>] parport_pc_pnp_probe+0x0/0x130 [parport_pc]
 [<c01fd7ff>] pnp_device_probe+0x4f/0xb0
 [<c022ae9b>] driver_probe_device+0x3b/0xd0
 [<c022afd9>] __driver_attach+0x39/0x40
 [<c022a65a>] bus_for_each_dev+0x3a/0x60
 [<c022aff6>] driver_attach+0x16/0x20
 [<c022afa0>] __driver_attach+0x0/0x40
 [<c022aa8b>] bus_add_driver+0x7b/0xd0
 [<c01fd8ee>] pnp_register_driver+0x2e/0x60
 [<f88140dc>] parport_pc_find_ports+0x5c/0x70 [parport_pc]
 [<f8814520>] parport_pc_init+0x90/0x9b [parport_pc]
 [<c01351ff>] sys_init_module+0xbf/0x200
 [<c0102d31>] syscall_call+0x7/0xb
idr_remove called for id=1 which is not allocated.
 [<c01dfe26>] sub_remove+0x86/0xf0
 [<c01dfea8>] idr_remove+0x18/0x80
 [<c01dfea8>] idr_remove+0x18/0x80
 [<c018bf51>] release_inode_number+0x21/0x40
 [<c018c6d5>] free_proc_entry+0x15/0x50
 [<c018c7e4>] remove_proc_entry+0xd4/0x130
 [<c01201f6>] unregister_proc_table+0x76/0xa0
 [<c01201f6>] unregister_proc_table+0x76/0xa0
 [<c01201ae>] unregister_proc_table+0x2e/0xa0
 [<c01201ae>] unregister_proc_table+0x2e/0xa0
 [<c012002c>] unregister_sysctl_table+0x2c/0x40
 [<f8a49bb6>] parport_device_proc_unregister+0x16/0x30 [parport]
 [<f8a4693d>] parport_unregister_device+0xd/0x190 [parport]
 [<f8a4abb5>] parport_device_id+0x85/0x1e0 [parport]
 [<f8a49d18>] parport_daisy_init+0x78/0x210 [parport]
 [<c0137e6b>] setup_irq+0x9b/0x100
 [<f89a8090>] parport_pc_interrupt+0x0/0x70 [parport_pc]
 [<f8a464b9>] parport_announce_port+0x9/0xc0 [parport]
 [<f89a98c8>] parport_pc_probe_port+0x478/0x630 [parport_pc]
 [<f89aa5b8>] parport_pc_pnp_probe+0xc8/0x130 [parport_pc]
 [<f89aa4f0>] parport_pc_pnp_probe+0x0/0x130 [parport_pc]
 [<c01fd7ff>] pnp_device_probe+0x4f/0xb0
 [<c022ae9b>] driver_probe_device+0x3b/0xd0
 [<c022afd9>] __driver_attach+0x39/0x40
 [<c022a65a>] bus_for_each_dev+0x3a/0x60
 [<c022aff6>] driver_attach+0x16/0x20
 [<c022afa0>] __driver_attach+0x0/0x40
 [<c022aa8b>] bus_add_driver+0x7b/0xd0
 [<c01fd8ee>] pnp_register_driver+0x2e/0x60
 [<f88140dc>] parport_pc_find_ports+0x5c/0x70 [parport_pc]
 [<f8814520>] parport_pc_init+0x90/0x9b [parport_pc]
 [<c01351ff>] sys_init_module+0xbf/0x200
 [<c0102d31>] syscall_call+0x7/0xb

[-- Attachment #3: config-2.6.13-rc4-git1 --]
[-- Type: text/plain, Size: 36594 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.13-rc4-git1
# Fri Jul 29 04:20:39 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
# CONFIG_SMP is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_HIGHPTE=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_REGPARM=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_PHYSICAL_START=0x100000
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SOFTWARE_SUSPEND is not set

#
# ACPI (Advanced Configuration and Power Interface) Support
#
# CONFIG_ACPI is not set

#
# APM (Advanced Power Management) BIOS Support
#
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
CONFIG_APM_CPU_IDLE=y
# CONFIG_APM_DISPLAY_BLANK is not set
CONFIG_APM_RTC_IS_GMT=y
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
CONFIG_EISA=y
# CONFIG_EISA_VLB_PRIMING is not set
CONFIG_EISA_PCI_EISA=y
CONFIG_EISA_VIRTUAL_ROOT=y
CONFIG_EISA_NAMES=y
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_MULTIPATH=y
# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_TUNNEL=m
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
CONFIG_TCP_CONG_ADVANCED=y

#
# TCP congestion control
#
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_TUNNEL=m
# CONFIG_IPV6_TUNNEL is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set
# CONFIG_IP_NF_MATCH_SCTP is not set
# CONFIG_IP_NF_MATCH_COMMENT is not set
# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
# CONFIG_IP_NF_RAW is not set
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
# CONFIG_IP6_NF_QUEUE is not set
# CONFIG_IP6_NF_IPTABLES is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
# CONFIG_NET_SCH_HFSC is not set
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_INGRESS is not set
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
# CONFIG_NET_CLS_IND is not set
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_1284=y

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
# CONFIG_PNPBIOS_PROC_FS is not set

#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=m
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
# CONFIG_BLK_DEV_SD is not set
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=m
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
CONFIG_FORCEDETH=m
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_LNE390 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_NE3210 is not set
# CONFIG_ES3210 is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
CONFIG_JOYSTICK_SIDEWINDER=y
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
# CONFIG_TIPAR is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=m
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
CONFIG_AGP_AMD64=m
# CONFIG_AGP_INTEL is not set
CONFIG_AGP_NVIDIA=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# TPM devices
#
# CONFIG_TCG_TPM is not set

#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
# CONFIG_I2C_ALGOPCA is not set

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
# CONFIG_I2C_AMD756_S4882 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_ISA=m
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
CONFIG_I2C_SENSOR=m

#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Hardware Monitoring support
#
CONFIG_HWMON=y
CONFIG_SENSORS_ADM1021=m
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_ASB100=m
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_LM63 is not set
CONFIG_SENSORS_LM75=m
# CONFIG_SENSORS_LM77 is not set
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
# CONFIG_SENSORS_LM87 is not set
CONFIG_SENSORS_LM90=m
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=y
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_NVIDIA is not set
CONFIG_FB_RIVA=m
CONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y

#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# ISA devices
#
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set

#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
CONFIG_USB_AUDIO=m
# CONFIG_USB_BLUETOOTH_TTY is not set
CONFIG_USB_MIDI=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set

#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set

#
# Video4Linux support is needed for USB Multimedia device support
#

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set

#
# USB DSL modem support
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_BLOCK=m
# CONFIG_MMC_WBSD is not set

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# SN Devices
#

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set

#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_EARLY_PRINTK=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES_586 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set

#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set

#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y

^ permalink raw reply	[flat|nested] 9+ messages in thread
* Re: Linux 2.6.13-rc4
@ 2005-07-29 16:55 Randy Dunlap
  2005-07-29 17:00 ` Jesper Juhl
  0 siblings, 1 reply; 9+ messages in thread
From: Randy Dunlap @ 2005-07-29 16:55 UTC (permalink / raw)
  To: Jesper Juhl, Linus Torvalds, Linux Kernel Mailing List



> On 7/29/05, Linus Torvalds <torvalds@osdl.org> wrote:
> > 
> > Hey everybody,
> > 
> >  as many of you are aware, we were talking (not enough) about the
release
> > process at LKS this year.
> > 
> > This ain't it.
> > 
> > This is just the regular old release "process", with some LKS
backlog put
> > in for good measure.
> > 
> > But the good news is, that I'll try the new release process after 2.6.13
> > is out, which is hopefully not too far away. Which means that we should
> > try to let people know about the fact that if they want to merge stuff,
> > they should do so in the first two weeks after the 2.6.13 release,
and no
> > later (also, no earlier either, by now).
> > 
> 
> For the bennefit of those of us who were not at LKS, could someone
> elaborate a bit on "the new release process" ?


It's summarized here:
http://lwn.net/Articles/144281/

---
~Randy

^ permalink raw reply	[flat|nested] 9+ messages in thread
* Linux 2.6.13-rc4
@ 2005-07-28 23:34 Linus Torvalds
  2005-07-29 16:48 ` Jesper Juhl
  0 siblings, 1 reply; 9+ messages in thread
From: Linus Torvalds @ 2005-07-28 23:34 UTC (permalink / raw)
  To: Linux Kernel Mailing List


Hey everybody,

 as many of you are aware, we were talking (not enough) about the release
process at LKS this year. 

This ain't it.

This is just the regular old release "process", with some LKS backlog put 
in for good measure. 

But the good news is, that I'll try the new release process after 2.6.13
is out, which is hopefully not too far away. Which means that we should
try to let people know about the fact that if they want to merge stuff,
they should do so in the first two weeks after the 2.6.13 release, and no
later (also, no earlier either, by now).

So if you have a favourite kernel developer, please wake him up with a
friendly kick to the head and explain this concept to him in small
easy-to-understand words, and tell him that we're in the freeze process
for 2.6.13 now, and that he should be gathering up the patches, and make
sure they get to me _after_ 2.6.13 is out, but at that point do it in a
timely manner.

Ok?

In the meantime, here's the 2.6.13-rc4 update, with a diffstat so horribly
ugly that I won't even show it (the kernel list would eat it as too big
anyway), and I'll have to go fix my code that generates it.

Oh, and in case you wonder, it's ugly because a cris architecture update
with long filenames that really causes git-apply to output som rather
nasty-looking diffstats ;)

ALSA, IB, NTFS, SCSI (qla2xxx) and the cris architecture update.

			Linus

----
Adrian Bunk:
  VIDEO_SAA7134 must depend on SOUND
  drivers/media/video/tveeprom.c: possible cleanups
  Documentation/Changes: document the required udev version
  m32r: add missing Kconfig help text
  i386: add missing Kconfig help text
  drivers/pnp/pnpbios/rsparser.c: fix compile error with PCI=n
  [NETFILTER]: Fix ip_conntrack_put() prototype.
  [SPARC]: Remvoe APM_RTC_IS_GMT from config.
  [NET]: NETCONSOLE must depend on INET
  [NET]: BRIDGE_EBT_ARPREPLY must depend on INET
  [IPV4]: fix IP_FIB_HASH kconfig warning

Alan Stern:
  scsi_scan: check return code from scsi_sysfs_add_sdev

Alexander Schulz:
  ARM: 2816/1: Shark: boot kernel images bigger than 1 MB
  ARM: 2815/1: Shark: new defconfig, fixes with __io and serial ports

Alexey Dobriyan:
  drm: via: fix sparse warnings
  Really __nocast-annotate kmalloc_node()
  visws: reexport pm_power_off

Andi Kleen:
  Undo mempolicy shared policy rbtree microoptimization
  x86_64: fix SMP boot lockup on some machines

Andreas Gruenbacher:
  reiserfs doesn't use mbcache
  mbcache: Remove unused mb_cache_shrink parameter

Andreas Steinmetz:
  Fix RLIMIT_RTPRIO breakage

Andrew Morton:
  bio_clone fix
  Avoid device suspend on reboot
  ppc64: tpm_infineon build fix
  ppc64: genrtc build fix
  statically link halfmd4
  check_user_page_readable() deadlock fix
  user_mode_vm() build fix
  x86_64 fsnotify build fix
  softdog build fix
  eurotechwdt build fix
  qla2xxx: Kconfig dependency fix
  qla: remove anonymous union
  inotify: fix oops fix
  [SCSI] dpt_i2o warning fix
  [SCSI] aic79xx: ahd_linux_dev_reset() cleanup

Andrew Vasquez:
  More qla2xxx configuration fixes
  [SCSI] qla2xxx: Cleanup FC remote port registration.
  [SCSI] qla2xxx: Consolidate ISP24xx chip reset logic.
  [SCSI] qla2xxx: Add firmware version number to qla24xx_fw_version_str().
  [SCSI] qla2xxx: Update version number to 8.01.00b5-k.
  [SCSI] qla2xxx: Correct maximum supported lun and target-id definitions.
  [SCSI] qla2xxx: Update copyright banner.
  [SCSI] qla2xxx: Firmware updates.
  [SCSI] qla2xxx: Code scrubbing.
  [SCSI] qla2xxx: NVRAM id-list updates.
  [SCSI] qla2xxx: Add OS initialization codes for ISP24xx recognition.
  [SCSI] qla2xxx: Add ISP24xx initialization routines.
  [SCSI] qla2xxx: Add ISP24xx ISR routines.
  [SCSI] qla2xxx: Add ISP24xx IOCB manipulation routines.
  [SCSI] qla2xxx: Add ISP24xx flash-manipulation routines.
  [SCSI] qla2xxx: Add MBX command routines for ISP24xx support.
  [SCSI] qla2xxx: Generalize SNS generic-services routines.
  [SCSI] qla2xxx: Add ISP24xx diagnostic routines.
  [SCSI] qla2xxx: Add ISP24xx definitions.
  [SCSI] qla2xxx: Add pci ids for new ISP types.
  [SCSI] qla2xxx: Factor-out ISP specific functions to method-based call tables.

Andrey Panin:
  consolidate CONFIG_WATCHDOG_NOWAYOUT handling
  Serial: Add support for SIIG Quartet serial card

Andy Whitcroft:
  Remove bogus warning in page_alloc.c

Anton Altaparmakov:
  Automatic merge with /usr/src/ntfs-2.6.git.
  Fix soft lockup due to NTFS: VFS part and explanation
  Automatic merge with /usr/src/ntfs-2.6.git.
  Automerge with /usr/src/ntfs-2.6.git.
  Automatic merge with /usr/src/ntfs-2.6.git.
  NTFS: Fix a nasty deadlock that appeared in recent kernels.
  NTFS: Prepare for 2.1.23 release: Update documentation and bump version.
  NTFS: Change ntfs_map_runlist_nolock() to only decompress the mapping pairs
  NTFS: Add an extra parameter @last_vcn to ntfs_get_size_for_mapping_pairs()
  NTFS: Change the runlist terminator of the newly allocated cluster(s) to
  NTFS: Fix several occurences of a bug where we would perform 'var & ~const'
  NTFS: Detect the case when Windows has been suspended to disk on the volume
  NTFS: Fix a bug in address space operations error recovery code paths where
  NTFS: Stamp the transaction log ($UsnJrnl), aka user space journal, if it
  Automerge with /usr/src/ntfs-2.6.git.
  Automatic merge with /usr/src/ntfs-2.6.git.
  Automatic merge with /usr/src/ntfs-2.6.git
  Automatic merge with /usr/src/ntfs-2.6.git.
  NTFS: Use C99 style structure initialization after memory allocation where
  Merge with /usr/src/ntfs-2.6.git.
  Merge with /usr/src/ntfs-2.6.git
  Merge with /usr/src/ntfs-2.6.git
  Merge with /usr/src/ntfs-2.6.git
  NTFS: Use MAX_BUF_PER_PAGE instead of variable sized array allocation for
  NTFS: Minor cleanup: Define and use NTFS_MAX_CLUSTER_SIZE constant instead
  NTFS: Update attribute definition handling.
  NTFS: Some utilities modify the boot sector but do not update the checksum.
  NTFS: Fix compilation when configured read-only.
  NTFS: Include linux/swap.h in fs/ntfs/attrib.c for mark_page_accessed().
  NTFS: - Modify ->readpage and ->writepage (fs/ntfs/aops.c) so they detect
  NTFS: Fix sign of various error return values to be negative in
  NTFS: Add fs/ntfs/attrib.[hc]::ntfs_attr_make_non_resident().
  NTFS: - Fix bug in fs/ntfs/attrib.c::ntfs_find_vcn_nolock() where after
  NTFS: Add fs/ntfs/attrib.[hc]::ntfs_attr_vcn_to_lcn_nolock() used by the new
  NTFS: Add AT_EA in addition to AT_DATA to whitelist for being allowed to be
  NTFS: Correct sparse file handling.  The compressed values need to be
  NTFS: Make fs/ntfs/namei.c::ntfs_get_{parent,dentry} static and move the
  NTFS: - Set the ntfs_inode->allocated_size to the real allocated size in the
  NTFS: Fix a nasty runlist merge bug when merging two holes.
  NTFS: Change time to u64 in time.h::ntfs2utc() as it otherwise generates a
  NTFS: - Split ntfs_map_runlist() into ntfs_map_runlist() and a non-locking
  NTFS: Fix a bug in fs/ntfs/runlist.c::ntfs_mapping_pairs_decompress() in
  NTFS: - Add disable_sparse mount option together with a per volume sparse
  NTFS: Optimise/reorganise some error handling code in fs/ntfs/aops.c.
  NTFS: Fixup the resident attribute resizing code in
  NTFS: Fix stupid bug in fs/ntfs/mft.c introduced in last changeset.
  NTFS: Repeat a failed ntfs_truncate() in fs/ntfs/aops.c::ntfs_writepage()
  NTFS: Use i_size_{read,write}() in fs/ntfs/{aops.c,mft.c} and protect
  NTFS: Use i_size_read() in fs/ntfs/inode.c once and then use the cached value
  NTFS: - Use i_size_read() in fs/ntfs/super.c once and then use the cached
  NTFS: In fs/ntfs/dir.c, use i_size_read() once and then the cached value
  NTFS: - In fs/ntfs/compress.c, use i_size_read() at the start and then use the
  Merge with /usr/src/ntfs-2.6.git
  Merge with /usr/src/ntfs-2.6.git
  NTFS: Use i_size_read() in fs/ntfs/file.c::ntfs_file_open().
  NTFS: Use i_size_read() once and then use the cached value in
  NTFS: Use i_size_read() in fs/ntfs/logfile.c::ntfs_{check,empty}_logfile().
  NTFS: Use i_size_read() in fs/ntfs/attrib.c::ntfs_attr_set().

Anton Wöllert:
  ppc32: 8xx avoid icbi misbehaviour in __flush_dcache_icache_phys

Artem B. Bityuckiy:
  [JFFS2] Init locks early during mount
  [JFFS2] Rename function and update comments
  [JFFS2] Remove needless variable initialization
  [JFFS2] Avoid alloc/dealloc for zero sized nodes

Ben Dooks:
  ARM: 2831/1: S3C2440 - split s3c2440 clocks from central clock code
  ARM: 2829/1: S3C2410 - split s3c2440 irq specifics from core irq.c
  ARM: 2828/1: BAST - remove static map of ASIX area
  ARM: 2818/1: BAST - Use platform device for SuperIO 16550s

Bjorn Helgaas:
  PCDP: if PCDP contains parity information, use it

Brian Gerst:
  Fix warning in powernow-k8.c

Cal Peake:
  [IPV6]: fix implicit declaration of function `xfrm6_tunnel_unregister'

Carsten Otte:
  fix xip sparse file handling in ext2
  execute-in-place fixes

Chas Williams:
  [ATM]: allow bind() on point-to-multpoint svcs (from Martin Whitaker <martin_whitaker@ntlworld.com>)
  [ATM]: [zatm] eliminate kfree warning (from Tobias Hirning <sskyman@web.de>)

Chen, Kenneth W:
  [SCSI] Redundant this_count check in sd_init_command()
  [SCSI] Redundant memset in scsi_alloc_sgtable

Christian Borntraeger:
  s390: use __cpcmd in vmcp_write

Christoph Hellwig:
  [SCSI] aic7xxx: remove ahc_tailq
  [SCSI] aic7xxx: sane pci probing
  [SCSI] ifdef out broken fc4 EH code
  [SCSI] use list_for_each_entry_safe in scsi_error.c
  [SCSI] remove scsi_eh_eflags_ macros
  [SCSI] remove scsi_cmnd->state
  [SCSI] remove scsi_cmnd->owner
  [SCSI] remove scsi_cmnd->abort_reason
  [SCSI] remove scsi_cmnd.eh_state
  [SCSI] remove scsi_set_device

Christoph Lameter:
  [IA64] Altix pcibus_to_node implementation
  [IA64] pcibus_to_node implementation for IA64

Christophe Lucas:
  [SCTP]: Audit return code of create_proc_*

Chuck Ebbert:
  i386: clean up user_mode macros

Clemens Ladisch:
  [ALSA] usb-audio - change quirk type handling
  [ALSA] usb-audio - add support for Miditech USB MIDI keyboards
  [ALSA] seq-midi - silently ignore non-MIDI events
  [ALSA] ac97 - remove unused variable
  [ALSA] usb-audio - use bDeviceSubClass to detect MOTU FastLane
  [ALSA] usb-audio - rename QUIRK_MIDI_MOTU to QUIRK_MIDI_RAW
  [ALSA] usb-audio - enable high speed transfers with Audiy 2 NX
  [ALSA] usb-audio: add support for an unknown Yamaha USB MIDI device
  [ALSA] usb-audio - fix capture of non-48k sample rates on Audigy 2 NX
  [ALSA] usb-audio - high speed audio support

Cornelia Huck:
  s390: resource accessibility event handling
  s390: debug data for ifcc/ccc

Daniel Ritz:
  pcmcia: disable read prefetch/write burst on old O2Micro bridges
  yenta: free_irq() on suspend.

Dave Kleikamp:
  JFS: Fix i_blocks accounting when allocation fails
  JFS: Don't set log_SYNCBARRIER when log->active == 0
  JFS: Fix typo in last patch
  Merge with /home/shaggy/git/linus-clean/
  JFS: Remove assert statement in dbJoin & return -EIO instead
  JFS: Remove bogus WARN_ON statement and some dead code
  JFS: Allow security.* xattrs to be set on symlinks
  Merge with /home/shaggy/git/linus-clean/
  JFS: Code cleanup - getting rid of never-used debug code

David Gibson:
  ppc64: remove another fixed address constraint
  ppc64: dynamically allocate segment tables
  ppc64: kill bitfields in ppc64 hash code

David Mosberger-Tang:
  [IA64] Make PCDP work again.

David Ranson:
  serial: MRi MRI-PCIDS1 dual port serial card

David S. Miller:
  [SPARC64]: Fix ugly dependency on NR_CPUS being a power-of-2.
  [SPARC]: Add inotify syscall entries.
  [ATM]: speedtch: Revert 86cf42e4e029b83110cf98692420239103363dbf
  [TG3]: Update driver version and reldate.
  [SPARC64]: Move syscall success and newchild state out of thread flags.
  [SPARC64]: Privatize sun5_timer.
  [SPARC64]: Kill totally unused inline functions from asm/spitfire.h
  [SPARC64]: Simplify asm/rwsem.h slightly.
  [SPARC64]: Non-atomic bitops do not need volatile operations
  [SPARC]: Fix __KERNEL_SYSCALLS__ defining in envctrl.c and bbc_envctrl.c
  [W1]: Do not use NFLOG netlink number.
  [PKT_SCHED]: em_meta: Kill TCF_META_ID_{INDEV,SECURITY,TCVERDICT}
  [PKT_SCHED]: Kill TCF_META_ID_REALDEV from meta ematch.
  [NET]: Fix tc_verd thinko in skb_clone()
  [EMATCH]: Kill TCF_META_ID_TCCLASSID reference from meta ematch as well.

Dean Nelson:
  [IA64] fix call of smp_processor_id() by XPC while

Dimitry Andric:
  ARM: 2819/1: Fix several S3C24x0 IIS defines

Dominik Brodowski:
  pcmcia: fix sharing IRQs and request_irq without IRQ_HANDLE_PRESENT
  pcmcia: update documentation
  pcmcia: avoid duble iounmap of one address
  pcmcia: update au1000 to work with recent changes
  Add pcibios_bus_to_resource for parisc

Dominik Hackl:
  uml: update module interface

Downing, Thomas:
  ppc32: fix compilation error with CONFIG_PQ2FADS

Duncan Sands:
  [ATM]: [speedtch] cure atm_printk() macro gcc-2.95 compile error

Eric W. Biederman:
  acpi: Don't call acpi_sleep_prepare from acpi_power_off
  acpi_power_off: Don't switch to the boot cpu
  x86_64 sync machine_power_off with i386
  APM: Remove redundant call to set_cpus_allowed
  i386 machine_power_off cleanup
  machine_shutdown: Typo fix to actually allow specifying which cpu to reboot on
  pcwd.c: Call kernel_power_off not machine_power_off
  swpsuspend: Have suspend to disk use factors of sys_reboot
  68328serial: sysrq should use emergency_reboot
  In hangcheck-timer.c call emergency_restart()
  Fix watchdog drivers to call emergency_reboot()
  Update sysrq-B to use emergency_restart()
  Call emergency_reboot from panic
  Use kernel_power_off in sysrq-o
  x86_64: Implemenent machine_emergency_restart
  x86_64: Fix reboot_force
  i386: Implement machine_emergency_reboot
  Don't export machine_restart, machine_halt, or machine_power_off.
  Fix the arguments to machine_restart on cris
  Add emergency_restart()
  Make ctrl_alt_del call kernel_restart to get a proper reboot.
  Refactor sys_reboot into reusable parts
  Add missing device_suspsend(PMSG_FREEZE) calls.

Eugene Surovegin:
  ppc32: fix 440SP MAL channels count

Francois Romieu:
  [ATM]: zatm: mailbox converted to pci_alloc_consistent()

Geert Uytterhoeven:
  Amiga joystick: Fix typo introduced by the open/close race fixes

George Anzinger:
  itimer fixes

Giancarlo Formicuccia:
  Fix incorrect Asus k7m irq router detection

Gleb Natapov:
  [IB/uverbs]: Add O_ASYNC support

Greg Edwards:
  [IA64] remove CONFIG_IA64_SGI_SN_SIM

Gregory B Frost:
  DVICO Fusion DVB-T1 Tuner (LG-Z201) fix

Guillaume Autran:
  ppc32: fix destroy_context() race condition

Hal Rosenstock:
  [IB/ucm]: Clean up userspace CM
  IB: Add core locking documentation to Infiniband
  IB: Eliminate sparse warnings in SA client
  IB: Hook up userspace CM to the make system
  IB: Add kernel portion of user CM implementation
  IB: Add the header file for user space CM
  IB: Implementation for RMPP support in user MAD
  IB: User MAD ABI changes to support RMPP
  IB: Add the kernel CM implementation
  IB: Add the header file for kernel CM (Communications Manager)
  IB: Add Service Record support to SA client
  IB: Add RMPP implementation
  IB: Introduce RMPP APIs
  IB: A couple of IB core bug fixes
  IB: Add ib_create_ah_from_wc to IB verbs
  IB: Fix a couple of MAD code paths
  IB: Optimize canceling a MAD
  IB: Add ib_modify_mad API to MAD
  IB: Eliminate MAD cache leak associated with local completions
  IB: Simplify calling of list_del in MAD
  IB: Add automatic retries to MAD layer
  IB: Add ib_coalesce_recv_mad to MAD
  IB: Minor cleanup during MAD startup and shutdown
  IB: Fix timeout/cancelled MAD handling
  IB: Change ib_mad_send_wr_private struct
  IB: Change saving of user's send wr_id in MAD
  IB: Combine some MAD routines
  IB: Add MAD helper functions
  IB: Update MAD client API
  IB: Update FMR functions

Hans-Juergen Tappe (SYSGO AG):
  [IPV4]: Fix Kconfig syntax error

Harald Welte:
  [ALSA] Add new pci device id (SB400) to atiixp-modem

Heiko Carstens:
  s390: cpu timer reset in machine check handler
  s390: 31 bit memory size limit
  s390: external call performance
  s390: atomic64 inline functions

Henrik Kretzschmar:
  [ALSA] typo-fix and snd_assert()-expression-split
  [ALSA] fix compiler warning
  [ALSA] cleanup and typo-correction
  [ALSA] Fix two typos and changes on snd_assert()

Herbert Xu:
  [XFRM]: Fix possible overflow of sock->sk_policy
  [CRYPTO]: Fix zero-extension bug on 64-bit architectures.

Horst Hummel:
  s390: free dasd slab cache
  s390: fba dasd i/o errors

Ian Campbell:
  cs89x0: collect tx_bytes statistics

Ian Dall:
  JFS: Need to be root to create files with security context

Ian Kent:
  autofs4: fix infamous "Busy inodes after umount ..." message

Ian Wienand:
  [IA64] Fix undefined reference to can_cpei_retarget for simulator

James Bottomley:
  [SCSI] fix function prototype warning
  fix voyager subarchitecture EXPORT_SYMBOL breakage caused by i386_ksym reduction
  [SCSI] SPI transport class, don't negotiate options not supported
  [SCSI] add TYPE_RBC to our type table
  [SCSI] aic7xxx: fix boot hang with Fujitsu drives
  [SCSI] aic7xxx: correct target valid check in aic7xxx_proc.c
  [SCSI] 	megaraid: fix compilation after eh locking changes

James Courtier-Dutton:
  [ALSA] ac97: Fix volume control bit size detection for STAC9704.
  [ALSA] emu10k1: Add EMU 1212m card entry and document it as not supported yet.
  [ALSA] snd-emu10k1: Fixes recognition of Audigy ES.
  [ALSA] emu10k1: Add module option uint subsystem.
  [ALSA] emu10k1: Added tested status comments.
  [ALSA] emu10k1: Sort by card id.
  [ALSA] snd-emu10k1: Tidy mixer controls.
  [ALSA] snd-emu10k1: Card capabilities tidy up.

James Morris:
  SELinux: default labeling of MLS field

James.Smart@Emulex.Com:
  [SCSI] add int_to_scsilun() function
  [SCSI] lpfc: Change version to 8.0.29.
  [SCSI] lpfc: Update copyright notices
  [SCSI] lpfc: Remove $Id$ keyword strings.
  [SCSI] lpfc: Fix ADISC completion incorrectly putting initiators on mapped list
  [SCSI] lpfc: Add completion handler to the abort iocbs
  [SCSI] lpfc: Fix LS_RJT never sent by lpfc_els_unsol_event()
  [SCSI] lpfc: Add LP6000 PCI ID
  [SCSI] lpfc: Set max_sectors in host template
  [SCSI] lpfc: Fix error loading on sparc
  [SCSI] lpfc: Fixes in mbox_timeout_handler
  [SCSI] Fix issue where all hosts log nodev message for other initiators
  [SCSI] lpfc: hgp/pgp cleanups

Jan Kara:
  ext3: drop quota references before releasing inode
  ext2: drop quota reference before releasing inode

Jar:
  pcmcia: remove duplicates in orinoco_cs

Jaroslav Kysela:
  [ALSA] version 1.0.9b
  [ALSA] ens1371 - added extra delay for ac97 codec initialization
  [ALSA] via82xx - changed MSI K7T266 Pro2 - 4005:4710 in white list (SRC enable)
  [ALSA] via82xx - added MSI K7T266 Pro2 - 4005:4710 to white list (DXS enable)
  [ALSA] ak4114: removed duplicate wake_up()

Jeff Dike:
  uml: fix misdeclared function

Jeff Mahoney:
  reiserfs: fix deadlock in inode creation failure path w/ default ACL
  Lindent: ignore .indent.pro

Jens Axboe:
  as-iosched tunable encoding fix

Jesper Juhl:
  Update CREDITS entry and listings in source files for Jesper Juhl
  clean up inline static vs static inline
  [ATM]: Trivial spelling fix patch for net/Kconfig
  NTFS: Remove checks for NULL before calling kfree() since kfree() does the

Joachim Nilsson:
  fix gconfig crash

Joern Engel:
  [MTD] cfi_cmdset_0002: Plugged a mem leak.

Jon Smirl:
  fbdev: colormap fixes
  radeonfb: clean up EDID sysfs attribute
  fbmem: use unregister_chrdev() on unload
  fbmon: horizontal frequency rounding fix

Keith Owens:
  [IA64] unwind.c uses wrong unat from switch_stack

Komuro:
  pcmcia: fix many device IDs

Kumar Gala:
  ppc32: Fix building of TQM8260 board
  ppc32: Fix building of radstone_ppc7d
  ppc32: Fix building of prpmc750
  ppc32: Fix typo in setup of 2nd PCI bus on 85xx
  ppc32: Make the UARTs on MPC824x individual platform devices
  ppc32: Add proper prototype for cpm2_reset()
  I2C-MPC: Restore code removed

Kurt Wall:
  Add text for dealing with "dot releases" to README

Kyle Moffett:
  [NET]: Fix setsockopt locking bug

Linda Xie:
  [SCSI] IBM VSCSI Client: sending client info to server

Linus Torvalds:
  Linux 2.6.13-rc4
  Revert broken "statement with no effect" warning fix
  Merge master.kernel.org:/.../perex/alsa
  Merge master.kernel.org:/.../davem/sparc-2.6
  Fix up qla2xxx configuration bogosity
  Merge head 'for-linus' of master.kernel.org:/.../shaggy/jfs-2.6
  Merge master.kernel.org:/.../davem/net-2.6
  Merge master.kernel.org:/.../aegl/linux-2.6
  Merge master.kernel.org:/home/rmk/linux-2.6-arm-smp
  Merge master.kernel.org:/.../davem/net-2.6
  Merge master.kernel.org:/home/rmk/linux-2.6-arm
  Merge master.kernel.org:/home/rmk/linux-2.6-arm-smp
  Fix compiler warning in qla_iocb.c
  Merge master.kernel.org:/.../jejb/scsi-for-linus-2.6
  Merge master.kernel.org:/.../davem/net-2.6
  Merge master.kernel.org:/.../davem/sparc-2.6
  Merge master.kernel.org:/home/rmk/linux-2.6-serial
  Merge master.kernel.org:/home/rmk/linux-2.6-arm
  Remove "noreplacement" kernel command line option.
  x86: use alternative instructions for fnsave/fxsave too
  Merge master.kernel.org:/.../davem/net-2.6
  x86: make restore_fpu() use alternative assembler instructions
  Fix up incorrect "unlikely()" on %gs reload in x86 __switch_to
  Merge master.kernel.org:/home/rmk/linux-2.6-serial
  Merge master.kernel.org:/home/rmk/linux-2.6-arm
  Merge master.kernel.org:/.../aia21/ntfs-2.6
  Merge master.kernel.org:/.../tglx/mtd-2.6
  Merge master.kernel.org:/.../aegl/linux-2.6
  Merge master.kernel.org:/.../aegl/linux-2.6
  Merge master.kernel.org:/.../tglx/mtd-2.6
  Merge head 'for-linus' of master.kernel.org:/.../shaggy/jfs-2.6
  Merge /home/torvalds/linux-2.6-arm

Loic Le Loarer:
  [EQL]: Proper num_slaves decrement

Lucas Correia Villa Real:
  ARM: 2825/1: S3C2410: turns %d into %ld on DMA printk

Luming Yu:
  /home/lenb/linux-2.6 branch 'acpi-2.6.12'
  ACPI: delete unnecessary EC console messages

Marcel Selhorst:
  tpm: Support for Infineon TPM

Marcelo Feitoza Parisi:
  [ATM]: [idt77252] use time_after() macro
  [NET PCMCIA]: drivers/net/pcmcia/smc91c92_cs.c : Use of time_after macro
  [WAN]: drivers/net/wan/: use of time_after macro

Marcelo Tosatti:
  ppc32: 8xx remove BROKEN Kconfig entry
  cpm_uart: use DPRAM for early console
  ppc32: 8xx: update DataTLBMiss exception comment

Mark Haverkamp:
  [SCSI] aacraid: Fix sgmap error
  [SCSI] aacraid: New products patch

Martin Schwidefsky:
  s390: find_next_{zero}_bit fixes
  s390: spin lock retry
  s390: fadvise hint values.

Matt:
  [ALSA] hda: add sigmatel hp detect support
  [ALSA] hda: enable unsolicited responses
  [ALSA] hda-codec - SigmaTel HDA resume support
  [ALSA] hda-codec - SigmaTel HDA multichannel support

Matt Mackall:
  [NET]: Move in_aton from net/ipv4/utils.c to net/core/utils.c

Matt Porter:
  ppc32: fix dma_map_page() to use page_to_bus()

Matthias Urlichs:
  Option Card driver update, Maintainer entry

Mauro Carvalho Chehab:
  v4l: bug fixes for tuner, cx88 and tea5767

Michael Burian:
  ARM: 2794/1: Add "Image" and "mach-types.h" to dontdiff list

Michael Chan:
  [TG3]: add 5780 fiber support
  [TG3]: disallow jumbo TSO on 5780
  [TG3]: consolidate all DMA water mark settings
  [TG3]: add variable buffer size for standard ring
  [TG3]: add 5780 basic jumbo frame support
  [TG3]: add 5780 basic support

Michael Gernoth:
  ARM: 2830/1: Fix Jornada 720 PCMCIA-support

Michael Hunold:
  v4l: fix tuning with MXB driver

Michael Krufky:
  dvb: rename lgdt3302 frontend module to lgdt330x
  v4l: hybrid dvb: rename CFLAGS from CONFIG_DVB_xxxx back to original HAVE_xxxx
  v4l: hybrid dvb: move #defines to Makefile
  v4l: hybrid dvb: fix warnings with -Wundef
  dvb/v4l: cx88 cleanup
  lgdt3302: warning fix
  dvb/4vl: RF input selection fir
  dvb/v4l: lgdt3302: isolate tuner
  v4l: fix regression modprobe bttv freezes the computer
  dvb: LGDT3302 QAM lock bug fix

Michael S. Tsirkin:
  [IB/mthca]: Use io_remap_pfn_range for PCI space

Michal Januszewski:
  fbdev: update info->cmap when setting cmap from user-/kernelspace.
  fbcon: don't repaint the cursor when it is disabled.

Michal Ostrowski:
  rocket.c: Fix ldisc ref count handling

Mikael Starvik:
  CRIS IDE driver
  CRIS update: new subarchitecture v32
  CRIS update: updates for 2.6.12
  CRIS update: synchronous serial port driver
  CRIS update: SMP
  CRIS update: profiler
  CRIS update: pci
  CRIS update: mm
  CRIS update: misc patches
  CRIS update: IRQ
  CRIS update: I/O and DMA allocator
  CRIS update: drivers
  CRIS update: debug
  CRIS update: console
  CRIS update: configuration and build
  CRIS update: arch split

Mike Miller:
  cciss per disk queue

Miles Bader:
  v850: Define L1_CACHE_SHIFT and L1_CACHE_SHIFT_MAX
  v850: Update PCI support
  v850: Add pte_file
  v850: Update ioremap return type and add ioread/iowrite functions
  v850: Add defconfigs
  v850: const-qualify first parameter of find_next_zero_bit
  v850: Define pfn_valid
  v850: Align ___start___param to match parameter alignment

Moore, Eric Dean:
  [SCSI] - mptfusion - convert to new change_queue_depth API

Neil Brown:
  Fix raid0's attempt to divide by 64bit numbers

NeilBrown:
  md: when resizing an array, we need to update resync_max_sectors as well as size
  md/raid1: clear bitmap when fullsync completes

Nick Sillik:
  [NETFILTER]: Fix -Wunder error in ip_conntrack_core.c

Nicolas Graziano:
  [ALSA] hda driver, correct bug in model 'auto'

Nigel Cunningham:
  Address BUG: using smp_processor_id() in preemptible [00000001] code
  Fix missing refrigerator invocation in jffs2
  Add missing tvaudio try_to_freeze()
  try_to_freeze() call fixes

Nishanth Aravamudan:
  [ALSA] Fix-up sleeping in sound/usb
  [ALSA] Fix-up sleeping in sound/ppc
  [ALSA] sound/pci: fix-up sleeping paths
  [SPARC]: sbus/vfc_i2c: remove sleep_on() usage
  [SPARC]: sbus/envctrl: replace schedule_timeout() with msleep_interruptible()
  [SPARC]: sbus/aurora: replace schedule_timeout() with msleep_interruptible()
  vt.c build fix
  [SCSI] scsi/qla1280: replace schedule_timeout() with ssleep()

Olaf Hering:
  turn many #if $undefined_string into #ifdef $undefined_string
  make a few functions static in pmac_setup.c
  ppc64: hide CONFIG_ADB
  ppc64: update defconfigs
  ppc32: update defconfigs
  ppc/ppc64: use Kconfig.hz
  uml: add dependency to arch/um/Makefile for parallel builds
  uml: readd missing define to arch/um/Makefile-i386
  [ATM]: [he] remove linux/version.h include
  Serial: Remove linux/version.h
  ratelimit the ieee1394 IR legacy activated messages
  ppc32: make -j12 all fails in uImage target
  ARM: remove linux/version.h include from arch/arm

Olivier Blin:
  i4l: add Olitec ISDN PCI card in hisax gazel driver

Olof Johansson:
  ppc64: add 970MP PVR

Paolo 'Blaisorblade' Giarrusso:
  sys_get_thread_area does not clear the returned argument
  uml: add skas0 command-line option
  remove EXPORT_SYMBOL for root_dev
  uml: hostfs: unuse ROOT_DEV
  uml: allow building as 32-bit binary on 64bit host
  uml: reintroduce pcap support
  uml: fix hppfs error path
  uml: gcc 2.95 fix and Makefile cleanup
  uml: consolidate modify_ldt
  uml: workaround host bug in "TT mode vs. NPTL link fix"
  uml: fix lvalue for gcc4

Patrick Boettcher:
  dvb: cx88 output mode fix

Patrick McHardy:
  [EMATCH]: Remove feature ifdefs in meta ematch.
  [NETFILTER]: Fix ip6t_LOG MAC format
  [NETFILTER]: Use correct byteorder in ICMP NAT
  [NETFILTER]: Wait until all references to ip_conntrack_untracked are dropped on unload
  [NETFILTER]: Fix potential memory corruption in NAT code (aka memory NAT)
  [NETFILTER]: Fix deadlock in ip6_queue
  [NET]: Make ipip/ip6_tunnel independant of XFRM
  [IPV4]: Don't select XFRM for ip_gre
  [NET]: Only build flow.o if CONFIG_XFRM=y
  [PKT_SCHED]: Kill TCF_META_ID_TCCLASSID.

Pavel Roskin:
  pcmcia: fix comment
  pcmcia: ide-cs id_table update

Pekka Enberg:
  NTFS: Remove spurious void pointer casts from fs/ntfs/.

Pete Zaitcev:
  ub: fix for blank CDs

Peter Staubach:
  stale POSIX lock handling

Qu Fuping:
  JFS: fsync wrong behavior when I/O failure occurs

Ralf Baechle:
  serial_core whitespace fix

Randy Dunlap:
  kernel/crash_dump.c: add kerneldoc
  kernel/cpuset.c: add kerneldoc, fix typos
  kernel/capability.c: add kerneldoc
  [NET]: Improve presentation of networking driver families.
  [NET]: Kconfig: NETCONSOLE and NETPOLL together
  NTFS: Fix printk format warnings on ia64. (Randy Dunlap)

Richard Henderson:
  alpha: fix "statement with no effect" warnings
  new alpha syscalls

Robert Love:
  [IA64] inotify: ia64 syscalls.
  inotify: add x86-64 syscall entries
  inotify: add missing hook to sys32_open
  inotify: check retval in init
  inotify: change default limits
  inotify: exit path cleanups
  inotify: oops fix
  inotify: use fget_light
  inotify: misc. cleanup
  inotify: MAINTAINERS
  inotify: documentation update
  inotify: misc cleanup
  inotify: event ordering
  inotify: move sysctl

Roland Dreier:
  Merge /scratch/Ksrc/linux-git/
  [IB/ipoib]: Fix unsigned comparisons to handle wraparound
  [IB/mthca]: Fix error CQ entry handling on mem-free HCAs

Rolf Eike Beer:
  watchdog: add missing 0x in alim1535_wdt.c

Russell King:
  [ARM SMP] Fix data corruption in test_* bitops
  ARM SMP: Mark device mappings as "device" in ARMv6 parlance
  ARM SMP: Add ARMv6 memory barriers
  ARM SMP: Use exclusive load/store for __xchg
  ARM SMP: Fix ARMv6 spinlock and semaphore implementations
  Serial: No need to check for priv != NULL in remove_one
  ARM SMP: Mark mroe CPU init data with __cpuinitdata
  ARM SMP: Mark CPU init functions/data with __cpuinit/...data
  ARM: Remove global nwfpe register variable
  ARM: Allow register_undef_hook to be called with IRQs off
  ARM: Convert bitops to use ARMv6 ldrex/strex instructions
  Serial: Move deprecation of register_serial forward to September
  ARM SMP: Initialise cpu_present_map
  ARM SMP: We list IRQs for present CPUs, not online CPUs
  ARM SMP: Rename cpu_present_mask to cpu_possible_map

Rusty Russell:
  [NETFILTER]: ip_conntrack_expect_related must not free expectation

Sascha Hauer:
  ARM: 2687/1: i.MX framebuffer: make dmacr register platform configurable

Sergey Ulanov:
  [ALSA] Jack Sense support for AD1980 and AD1888

Siddha, Suresh B:
  x86_64: TASK_SIZE fixes for compatibility mode processes

Sonny Rao:
  JFS: performance patch

Sridhar Samudrala:
  [SCTP]: Fix potential null pointer dereference while handling an icmp error

Stefan Bader:
  s390: channel tape fixes

Stephen Hemminger:
  [IPV4]: Fix up lots of little whitespace indentation stuff in fib_trie.

Steve Dickson:
  NFS: procfs/sysctl interfaces for lockd do not work on x86_64

Steven Rostedt:
  speed up on find_first_bit for i386 (let compiler do the work)
  fix MAX_USER_RT_PRIO and MAX_RT_PRIO

suzuki:
  madvise() does not always return -EBADF on non-file mapped area

Takashi Iwai:
  [ALSA] wavefront - declare initialization data as static
  [ALSA] via82xx - Fix dxs_support of twinhead laptop
  [ALSA] vx-driver - Fix the calculation of frequency parameter
  [ALSA] hdsp - Add 'Sample Clock Source Locking' control
  [ALSA] Add ARM PXA2xx AC97 driver
  [ALSA] Add DBRI driver on Sparcs
  [ALSA] Add help texts to Kconfig
  [ALSA] maestro3 - Clean up
  [ALSA] Fix resume of intel8x0
  [ALSA] cmipci - Add Mic Boost capture switch
  [ALSA] vxpocket - Remove unused code
  [ALSA] Fix and clean-up of vxpocket driver
  [ALSA] Use kstrdup
  [ALSA] Fix dependency of GUS driver
  [ALSA] hda-codec - Add entry for Acer APFV
  [ALSA] hda-codec - Add 6stack model for ALC880
  [ALSA] trident - Shut up compile warnings
  [ALSA] hda-codec - Fix oops with ALC880

Thomas Gleixner:
  [MTD] NAND: Fix broken bad block scan for 16 bit devices
  Merge with rsync://fileserver/linux
  [JFFS2] Fix node allocation leak
  Merge with rsync://fileserver/linux
  [MTD] Make XIP support depend on CONFIG_ARM

Thomas Graf:
  [PKT_SCHED]: Reduce branch mispredictions in pfifo_fast_dequeue
  [PKT_SCHED]: Remove debugging leftover from textsearch ematch

Todd Poynor:
  Merge with rsync://fileserver/linux
  [JFFS2] Avoid compiler warnings when JFFS2_FS_WRITEBUFFER=n

Tom Duffy:
  Add kernel portion of user CM implementation (fix)

Tom Rini:
  Change PowerPC MPC8xx maintainer

Tony Luck:
  e1000: no need for reboot notifier
  Auto merge with /home/aegl/GIT/linus
  Auto merge with /home/aegl/GIT/linus
  Auto merge with rsync://rsync.kernel.org/.../torvalds/linux-2.6.git
  Auto merge with /home/aegl/GIT/linus
  Auto merge with /home/aegl/GIT/linus

V. ANANDA KRISHNAN:
  jsm: warning fixes
  jsm: use dynamic major number allocation

Victor Fusco:
  [ALSA] sound/core Fix the sparse warning 'implicit cast to nocast type'
  [ATM]: [ambassador] Fix the sparse warning "implicit cast to nocast type"
  [ATM]: [firestream] fix the sparse warning "implicit cast to nocast type"
  [NET]: Fix "nocast type" warnings in skbuff.h
  [NETLINK]: Fix "nocast type" warnings

Yoichi Yuasa:
  mips: remove obsolete GIU driver for vr41xx
  mips: fbdev Kcofnig fix

Zoltan Menyhart:
  [IA64] improve flush_icache_range()


^ permalink raw reply	[flat|nested] 9+ messages in thread
end of thread, other threads:[~2005-07-30  1:56 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-07-29 12:09 Linux 2.6.13-rc4 Mickey Stein
2005-07-29 19:01 ` Cal Peake
2005-07-30  1:32   ` Mickey Stein
2005-07-30  1:53   ` Mickey Stein
  -- strict thread matches above, loose matches on Subject: below --
2005-07-29 16:55 Randy Dunlap
2005-07-29 17:00 ` Jesper Juhl
2005-07-28 23:34 Linus Torvalds
2005-07-29 16:48 ` Jesper Juhl
2005-07-29 23:41   ` Andrew Morton

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox