From: Daniel Walter <walter@mbo.de>
To: linux-kernel@vger.kernel.org
Subject: PROBLEM: ReiserFS crashing
Date: Wed, 03 Aug 2005 13:43:42 +0200 [thread overview]
Message-ID: <42F0ADEE.7020405@mbo.de> (raw)
Acessing the (software-)raid1 results in crash of shell
raid worked ok for some days before
error message appeared upon first hangup:
Linux version 2.6.11.10BERNHADINERMBO.DE (root@shepard) (gcc version
3.3.4) #3 Fri Jul 15 11:53:00 CEST 2005
ReiserFS: warning: is_leaf: item location seems wrong (second one):
*3.6* [2 2690 0x0 SD], item_len 492, item_location 3836,
free_space(entry_count) 65535
ReiserFS: md0: warning: vs-5150: search_by_key: invalid format found in
block 720896. Fsck?
ReiserFS: warning: is_leaf: item location seems wrong (second one):
*3.6* [2 2691 0x0 SD], item_len 3628, item_location 3836,
free_space(entry_count) 65535
ReiserFS: md0: warning: vs-5150: search_by_key: invalid format found in
block 720896. Fsck?
ReiserFS: warning: is_leaf: item length seems wrong: *3.6* [2 2694 0x0
SD], item_len 28716, item_location 3836, free_space(entry_count) 65535
ReiserFS: md0: warning: vs-5150: search_by_key: invalid format found in
block 720896. Fsck?
ReiserFS: warning: is_leaf: item length seems wrong: *3.6* [2 2701 0x0
SD], item_len 32812, item_location 3839, free_space(entry_count) 65535
ReiserFS: md0: warning: vs-5150: search_by_key: invalid format found in
block 720896. Fsck?
ReiserFS: warning: is_leaf: item location seems wrong (second one):
*3.6* [2 2702 0x0 SD], item_len 44, item_location 3516,
free_space(entry_count) 65535
ReiserFS: md0: warning: vs-5150: search_by_key: invalid format found in
block 720896. Fsck?
ReiserFS: warning: is_leaf: item location seems wrong: *3.6* [2709 2714
0x0 SD], item_len 44, item_location 32144, free_space(entry_count) 65535
ReiserFS: md0: warning: vs-5150: search_by_key: invalid format found in
block 720896. Fsck?
ReiserFS: warning: is_leaf: item location seems wrong (second one):
*3.6* [27092714 0x0 SD], item_len 47, item_location 3472,
free_space(entry_count) 65535
ReiserFS: md0: warning: vs-5150: search_by_key: invalid format found in
block 720896. Fsck?
ReiserFS: warning: is_leaf: item location seems wrong (second one):
*3.5*[2709 2713 0x0 SD], item_len 44, item_location 3532,
free_space(entry_count) 65535
ReiserFS: md0: warning: vs-5150: search_by_key: invalid format found in
block 720896. Fsck?
------------[ cut here ]------------
kernel BUG at fs/reiserfs/journal.c:494!
invalid operand: 0000 [#1]
PREEMPT
Modules linked in:
CPU: 0
EIP: 0060:[<c01ac802>] Not tainted VLI
EFLAGS: 00010286 (2.6.11.10BERNHADINERMBO.DE)
EIP is at reiserfs_in_journal+0x132/0x1a0
eax: e0935148 ebx: 000e0000 ecx: 00000cc8 edx: e0914000
esi: df065c00 edi: e0914104 ebp: 00000000 esp: de11fbc4
ds: 007b es: 007b ss: 0068
Process cp (pid: 6771, threadinfo=de11f000 task=cdeb7ac0)
Stack: df065c00 de11fc50 00000000 e0914000 00000000 e09120e0 df065c00
de11fc50
c01894cd df065c00 0000001c 00000000 00000001 de11fc04 00000000
00000000
00000000 0000001c df065c00 de11fc50 00000000 c01897b2 de11feb4
0000001c
Call Trace:
[<c01894cd>] scan_bitmap_block+0x28d/0x320
[<c01897b2>] scan_bitmap+0x162/0x280
[<c018aa4a>] reiserfs_allocate_blocknrs+0x18a/0x4f0
[<c019747e>] reiserfs_allocate_blocks_for_region+0x23e/0x15f0
[<c03742e6>] schedule+0x2e6/0x510
[<c037455a>] preempt_schedule+0x4a/0x70
[<c037455a>] preempt_schedule+0x4a/0x70
[<c010171c>] __up+0x1c/0x20
[<c0373ffb>] __up_wakeup+0x7/0xc
[<c0375551>] .text.lock.kernel_lock+0x35/0x37
[<c019933b>] reiserfs_prepare_file_region_for_write+0x34b/0x920
[<c0199fa2>] reiserfs_file_write+0x692/0x6c0
[<c0131520>] file_read_actor+0x0/0xe0
[<c014f757>] vfs_write+0xd7/0x150
[<c014f8a1>] sys_write+0x51/0x80
[<c010272f>] syscall_call+0x7/0xb
Code: 31 c2 31 d1 8b 54 24 0c 81 e1 ff 1f 00 00 8b 84 8a 0c 01 00 00 85
c0 74 0c
/scripts/ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux shepard 2.6.11.10BERNHADINERMBO.DE #3 Fri Jul 15 11:53:00 CEST
2005 i686 unknown unknown GNU/Linux
Gnu C 3.3.4
Gnu make 3.80
binutils 2.15.92.0.2
util-linux 2.12p
mount 2.12p
module-init-tools 3.1
e2fsprogs 1.35
reiserfsprogs 3.6.18
reiser4progs line
quota-tools 3.12.
Linux C Library 2.3.4
Dynamic linker (ldd) 2.3.4
Linux C++ Library 5.0.6
Procps 3.2.3
Net-tools 1.60
Kbd 1.12
Sh-utils 5.2.1
udev 050
Modules Loaded
# cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 4
model name : AMD Athlon(tm) Processor
stepping : 4
cpu MHz : 1060.878
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca
cmov pat pse36 mmx fxsr pni syscall mmxext 3dnowext 3dnow
bogomips : 2097.15
# cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
03c0-03df : vga+
0cf8-0cff : PCI conf1
8800-88ff : 0000:00:0c.0
8800-88ff : sym53c8xx
9000-903f : 0000:00:09.0
9000-903f : eepro100
9400-94ff : 0000:00:05.0
b000-b01f : 0000:00:04.3
b800-b80f : 0000:00:04.1
d000-dfff : PCI Bus #01
d800-d8ff : 0000:01:05.0
e000-e003 : 0000:00:00.0
e300-e37f : 0000:00:04.4
e400-e47f : motherboard
e400-e403 : PM1a_EVT_BLK
e404-e405 : PM1a_CNT_BLK
e408-e40b : PM_TMR
e410-e415 : ACPI CPU throttle
e420-e423 : GPE0_BLK
e800-e80f : 0000:00:04.4
e800-e80f : motherboard
e800-e80f : pnp 00:02
# cat /proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000cc000-000cd7ff : Adapter ROM
000d0000-000d35ff : Adapter ROM
000f0000-000fffff : System ROM
00100000-1ffebfff : System RAM
00100000-00376836 : Kernel code
00376837-0045d37f : Kernel data
1ffec000-1ffeefff : ACPI Tables
1ffef000-1fffefff : reserved
1ffff000-1fffffff : ACPI Non-volatile Storage
f1000000-f1000fff : 0000:00:0c.0
f1000000-f1000fff : sym53c8xx
f1800000-f18000ff : 0000:00:0c.0
f1800000-f18000ff : sym53c8xx
f2000000-f201ffff : 0000:00:09.0
f2800000-f2800fff : 0000:00:09.0
f2800000-f2800fff : eepro100
f3000000-f3dfffff : PCI Bus #01
f3000000-f3003fff : 0000:01:05.0
f3f00000-fb7fffff : PCI Bus #01
f4000000-f7ffffff : 0000:01:05.0
fb800000-fb800fff : 0000:00:00.0
fc000000-fdffffff : 0000:00:00.0
ffff0000-ffffffff : reserved
# lspci -vvv
00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 [IGD4-1P]
System Controller (rev 13)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
Region 0: Memory at fc000000 (32-bit, prefetchable) [size=32M]
Region 1: Memory at fb800000 (32-bit, prefetchable) [size=4K]
Region 2: I/O ports at e000 [disabled] [size=4]
Capabilities: [a0] AGP version 2.0
Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 [IGD4-1P] AGP
Bridge (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f3000000-f3dfffff
Prefetchable memory behind bridge: f3f00000-fb7fffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South]
(rev 40)
Subsystem: Asustek Computer, Inc. A7M266 Mainboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 06)
(prog-if 8a [Master SecP PriP])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Region 4: I/O ports at b800 [disabled] [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.3 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0
controller] (rev 16) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 20, cache line size 08
Interrupt: pin D routed to IRQ 12
Region 4: I/O ports at b000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.4 Non-VGA unclassified device: VIA Technologies, Inc. VT82C686
[Apollo Super ACPI] (rev 40)
Subsystem: Asustek Computer, Inc. A7M266 Mainboard
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:05.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
Subsystem: Asustek Computer, Inc. CMI8738 6ch-MX
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 20 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 9400 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100]
(rev 10)
Subsystem: Intel Corp.: Unknown device 0070
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 20 (2000ns min, 14000ns max), cache line size 08
Interrupt: pin A routed to IRQ 12
Region 0: Memory at f2800000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 9000 [size=64]
Region 2: Memory at f2000000 (32-bit, non-prefetchable) [size=128K]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
00:0c.0 SCSI storage controller: LSI Logic / Symbios Logic 53c895 (rev 01)
Subsystem: Unknown device dc93:2980
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 134 (7500ns min, 16000ns max), cache line size 10
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 8800 [size=256]
Region 1: Memory at f1800000 (32-bit, non-prefetchable) [size=256]
Region 2: Memory at f1000000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=64K]
01:05.0 VGA compatible controller: ATI Technologies Inc Rage 128 PF/PRO
AGP 4x TMDS (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc Rage Fury Pro/Xpert 2000 Pro
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f4000000 (32-bit, prefetchable) [size=64M]
Region 1: I/O ports at d800 [size=256]
Region 2: Memory at f3000000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at f3fe0000 [disabled] [size=128K]
Capabilities: [50] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW-
Rate=<none>
Capabilities: [5c] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: IBM Model: DORS-32160 Rev: S82C
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: IBM Model: DDRS-34560D Rev: DC1B
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 02 Lun: 00
Vendor: IBM Model: DDRS-34560D Rev: DC1B
Type: Direct-Access ANSI SCSI revision: 02
# cat /etc/raidtab
raiddev /dev/md0
raid-level 1
nr-raid-disks 2
persistent-superblock 1
chunk-size 4
device /dev/sdb1
raid-disk 0
device /dev/sdc1
raid-disk 1
next reply other threads:[~2005-08-03 11:44 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-08-03 11:43 Daniel Walter [this message]
2005-08-04 6:09 ` ReiserFS crashing Jan Engelhardt
2005-08-04 6:23 ` Daniel Walter
2005-08-04 6:34 ` Jan Engelhardt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=42F0ADEE.7020405@mbo.de \
--to=walter@mbo.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox