* my kernel sometimes did a crash, but no panic
@ 2005-08-09 16:04 Klasyk
2005-08-09 19:18 ` Mauro Carvalho Chehab
2005-08-09 20:21 ` Adrian Bunk
0 siblings, 2 replies; 7+ messages in thread
From: Klasyk @ 2005-08-09 16:04 UTC (permalink / raw)
To: linux-kernel
my kernel sometimes did a crash, but no panic
Keyboard hunged up :(
Network were working and I can log in. Without the keybord - it
generally worked.
In logs:
for example:
Aug 6 15:30:02 o kernel: Unable to handle kernel NULL pointer
dereference at virtual address 00
000000
Aug 6 15:30:02 o kernel: printing eip:
Aug 6 15:30:02 o kernel: c026b0d9
Aug 6 15:30:02 o kernel: *pde = 3588d001
Aug 6 15:30:02 o kernel: Oops: 0000 [#1]
Aug 6 15:30:02 o kernel: Modules linked in: ip_nat_irc
ip_conntrack_irc ip_nat_ftp ip_conntrack
_ftp ipt_MASQUERADE ipt_TCPMSS snd-usb-audio snd-usb-lib snd-seq-dummy
snd-seq-oss snd-seq-midi-ev
ent snd-seq snd-pcm-oss snd-mixer-oss snd-emu10k1 snd-rawmidi
snd-seq-device snd-ac97-codec snd-pc
m snd-timer snd-page-alloc snd-util-mem snd-hwdep snd soundcore
cpufreq_powersave cpuid cpu5wdt ev
dev pcspkr ip6t_LOG ip6t_limit ip6table_filter ip6table_mangle
ip6_tables ipt_TOS ipt_state ipt_RE
JECT ipt_LOG ipt_limit iptable_filter iptable_mangle iptable_nat
ip_conntrack ip_tables md5 ipv6 p
pp_async ppp_generic slhc eagle-usb af_packet cpufreq_ondemand eeprom
asb100 i2c-sensor i2c-viapro
ircomm-tty ircomm irda crc-ccitt floppy raw sg 8139too mii sr_mod
scsi_mod eth1394 ide-cd ohci139
4 ieee1394 loop via-agp bt878 tuner tvaudio bttv video-buf
firmware_class i2c-algo-bit v4l2-common
btcx-risc tveeprom i2c-core nvidia agpgart usblp ehci-hcd uhci-hcd
pwc videodev usbcore
Aug 6 15:30:02 o kernel: CPU: 0
Aug 6 15:30:02 o kernel: EIP: 0060:[con_unify_unimap+329/368]
Tainted: P VLI
Aug 6 15:30:02 o kernel: EIP: 0060:[<c026b0d9>] Tainted: P
VLI
Aug 6 15:30:02 o kernel: EFLAGS: 00010246 (2.6.11-12mdkcustom)
Aug 6 15:30:02 o kernel: EIP is at get_kobj_path_length+0x19/0x30
Aug 6 15:30:02 o kernel: eax: 00000000 ebx: 00000000 ecx:
ffffffff edx: f7d4a488
Aug 6 15:30:02 o kernel: esi: 00000001 edi: 00000000 ebp:
c1b19d58 esp: c1b19d4c
Aug 6 15:30:02 o su(pam_unix)[23584]: session closed for user root
Aug 6 15:30:02 o su(pam_unix)[25244]: session closed for user root
Aug 6 15:30:03 o su(pam_unix)[18603]: session closed for user root
Aug 6 15:30:03 o kernel: ds: 007b es: 007b ss: 0068
Aug 6 15:30:03 o kernel: Process events/0 (pid: 3,
threadinfo=c1b18000 task=c1aeb020)
Aug 6 15:30:03 o kernel: Stack: c0415200 f7d4a464 f74382f8 c1b19d7c
c026b15a f7d4a488 f7ff8d70
00000282
Aug 6 15:30:03 o kernel: 00000003 c0415200 f7d4a464 f74382f8
c1b19dc0 c02d9b29 f7d4a488
000000d0
Aug 6 15:30:03 o kernel: f74382e0 f7d4a42c c1b19dac c026eb47
f7d4a42c 082b5bd4 00000000
f75cdaec
Aug 6 15:30:03 o kernel: Call Trace:
Aug 6 15:30:03 o kernel: [show_registers+159/464]
show_stack+0x7f/0xa0
Aug 6 15:30:03 o kernel: [<c0103d2f>] show_stack+0x7f/0xa0
Aug 6 15:30:03 o kernel: [handle_BUG+106/192]
show_registers+0x15a/0x1d0
Aug 6 15:30:03 o kernel: [<c0103eca>] show_registers+0x15a/0x1d0
Aug 6 15:30:03 o kernel: [do_trap+62/240] die+0xce/0x160
Aug 6 15:30:03 o kernel: [<c01040ae>] die+0xce/0x160
Aug 6 15:30:03 o kernel: [do_page_fault+1073/1818]
do_page_fault+0x471/0x71a
Aug 6 15:30:03 o kernel: [<c0116331>] do_page_fault+0x471/0x71a
Aug 6 15:30:03 o kernel: [nmi_stack_correct+28/42]
error_code+0x2b/0x30
Aug 6 15:30:03 o kernel: [<c01039cb>] error_code+0x2b/0x30
Aug 6 15:30:03 o kernel: [con_insert_unipair+90/240]
kobject_get_path+0x1a/0x70
Aug 6 15:30:03 o kernel: [<c026b15a>] kobject_get_path+0x1a/0x70
Aug 6 15:30:03 o kernel: [skb_copy_bits+377/624]
class_hotplug+0x69/0x1a0
Aug 6 15:30:03 o kernel: [<c02d9b29>] class_hotplug+0x69/0x1a0
Aug 6 15:30:03 o kernel: [set_selection+1084/1264]
kobject_hotplug+0x1bc/0x2a0
Aug 6 15:30:03 o kernel: [<c026be0c>] kobject_hotplug+0x1bc/0x2a0
Aug 6 15:30:03 o kernel: [con_set_default_unimap+10/384]
kobject_del+0x1a/0x30
Aug 6 15:30:03 o kernel: [<c026b50a>] kobject_del+0x1a/0x30
Aug 6 15:30:03 o kernel: [skb_checksum+436/720]
class_device_del+0xa4/0xc0
Aug 6 15:30:03 o kernel: [<c02d9fc4>] class_device_del+0xa4/0xc0
Aug 6 15:30:03 o kernel: [skb_checksum+482/720]
class_device_unregister+0x12/0x20
Aug 6 15:30:03 o kernel: [<c02d9ff2>]
class_device_unregister+0x12/0x20
Aug 6 15:30:03 o kernel: [pg0+943977753/1068971008]
snd_unregister_device+0xa9/0x100 [snd]
Aug 6 15:30:03 o kernel: [<f88ca519>]
snd_unregister_device+0xa9/0x100 [snd]
Aug 6 15:30:03 o kernel: [pg0+944268948/1068971008]
snd_pcm_dev_unregister+0x64/0xd0 [snd-pcm]
Aug 6 15:30:04 o kernel: [<f8911694>]
snd_pcm_dev_unregister+0x64/0xd0 [snd-pcm]
Aug 6 15:30:04 o kernel: [pg0+943998790/1068971008]
snd_device_free+0xa6/0xc0 [snd]
Aug 6 15:30:04 o kernel: [<f88cf746>] snd_device_free+0xa6/0xc0
[snd]
Aug 6 15:30:04 o kernel: [pg0+943999348/1068971008]
snd_device_free_all+0x54/0x70 [snd]
Aug 6 15:30:04 o kernel: [<f88cf974>] snd_device_free_all+0x54/0x70
[snd]
Aug 6 15:30:04 o kernel: [pg0+943979379/1068971008]
snd_card_free+0x93/0x290 [snd]
Aug 6 15:30:04 o kernel: [<f88cab73>] snd_card_free+0x93/0x290 [snd]
Aug 6 15:30:04 o kernel: [pg0+943979932/1068971008]
snd_card_free_thread+0x2c/0x70 [snd]
Aug 6 15:30:04 o kernel: [<f88cad9c>] snd_card_free_thread+0x2c/0x70
[snd]
Aug 6 15:30:04 o kernel: [sys_timer_delete+134/192]
worker_thread+0x186/0x230
Aug 6 15:30:04 o kernel: [<c0185996>] worker_thread+0x186/0x230
Aug 6 15:30:04 o kernel: [__symbol_get+12/112] kthread+0x9c/0xd0
Aug 6 15:30:04 o kernel: [<c018956c>] kthread+0x9c/0xd0
Aug 6 15:30:04 o kernel: [kernel_thread+5/192]
kernel_thread_helper+0x5/0x10
Aug 6 15:30:04 o kernel: [<c0101315>] kernel_thread_helper+0x5/0x10
Aug 6 15:30:04 o kernel: Code: 89 34 24 e8 da bc f8 ff eb dd 90 8d b4
26 00 00 00 00 55 89 e5 5
7 8b 55 08 56 be 01 00 00 00 53 31 db 8b 3a b9 ff ff ff ff 89 d8 <f2>
ae f7 d1 49 8b 52 24 8d 74 3
1 01 85 d2 75 e7 5b 89 f0 5e 5f
OR:
Aug 8 06:29:49 o kernel: Unable to handle kernel NULL pointer
dereference at virtual address 00
000000
Aug 8 06:29:49 o kernel: printing eip:
Aug 8 06:29:49 o kernel: c026b0d9
Aug 8 06:29:49 o kernel: *pde = 318e8001
Aug 8 06:29:49 o kernel: Oops: 0000 [#1]
Aug 8 06:29:49 o kernel: Modules linked in: ip_nat_irc
ip_conntrack_irc ip_nat_ftp ip_conntrack
_ftp ipt_MASQUERADE ipt_TCPMSS snd-usb-audio snd-usb-lib snd-seq-dummy
snd-seq-oss snd-seq-midi-ev
ent snd-seq snd-pcm-oss snd-mixer-oss snd-emu10k1 snd-rawmidi
snd-seq-device snd-ac97-codec snd-pc
m snd-timer snd-page-alloc snd-util-mem snd-hwdep snd soundcore
cpufreq_powersave cpuid cpu5wdt ev
dev pcspkr ip6t_LOG ip6t_limit ip6table_filter ip6table_mangle
ip6_tables ipt_TOS ipt_state ipt_RE
JECT ipt_LOG ipt_limit iptable_filter iptable_mangle iptable_nat
ip_conntrack ip_tables md5 ipv6 p
pp_async ppp_generic slhc eagle-usb af_packet cpufreq_ondemand eeprom
asb100 i2c-sensor i2c-viapro
ircomm-tty ircomm irda crc-ccitt floppy raw sg sr_mod scsi_mod
ide-floppy ide-tape eth1394 8139to
o mii ide-cd ohci1394 ieee1394 loop via-agp bt878 tuner tvaudio bttv
video-buf firmware_class i2c-
algo-bit v4l2-common btcx-risc tveeprom i2c-core nvidia agpgart usblp
ehci-hcd uhci-hcd pwc videod
ev usbcore video thermal tc1100-wmi process
Aug 8 06:29:49 o kernel: r fan container button battery ac
Aug 8 06:29:49 o kernel: CPU: 0
Aug 8 06:29:49 o kernel: EIP: 0060:[con_unify_unimap+329/368]
Tainted: P VLI
Aug 8 06:29:49 o kernel: EIP: 0060:[<c026b0d9>] Tainted: P
VLI
Aug 8 06:29:49 o su(pam_unix)[14680]: session closed for user root
Aug 8 06:29:49 o kernel: EFLAGS: 00010246 (2.6.11-12mdkcustom)
Aug 8 06:29:50 o kernel: EIP is at get_kobj_path_length+0x19/0x30
Aug 8 06:29:50 o kernel: eax: 00000000 ebx: 00000000 ecx:
ffffffff edx: f758bc88
Aug 8 06:29:50 o kernel: esi: 00000001 edi: 00000000 ebp:
c1b29d58 esp: c1b29d4c
Aug 8 06:29:50 o kernel: ds: 007b es: 007b ss: 0068
Aug 8 06:29:50 o kernel: Process events/0 (pid: 3,
threadinfo=c1b28000 task=c1af3020)
Aug 8 06:29:50 o kernel: Stack: c0415200 f758bc64 f748ca78 c1b29d7c
c026b15a f758bc88 000000f0
00000286
Aug 8 06:29:50 o kernel: c1ade4a0 c0415200 f758bc64 f748ca78
c1b29dc0 c02d9b29 f758bc88
000000d0
Aug 8 06:29:50 o kernel: f748ca60 f758bc2c c1b29dac c026eb47
f758bc2c 08a743d4 00000000
f75d6eec
Aug 8 06:29:50 o kernel: Call Trace:
Aug 8 06:29:50 o kernel: [show_registers+159/464]
show_stack+0x7f/0xa0
Aug 8 06:29:50 o kernel: [<c0103d2f>] show_stack+0x7f/0xa0
Aug 8 06:29:50 o kernel: [handle_BUG+106/192]
show_registers+0x15a/0x1d0Aug 8 06:29:50 o kernel: [<c0103eca>]
show_registers+0x15a/0x1d0
Aug 8 06:29:50 o kernel: [do_trap+62/240] die+0xce/0x160
Aug 8 06:29:50 o kernel: [<c01040ae>] die+0xce/0x160
Aug 8 06:29:50 o kernel: [do_page_fault+1073/1818]
do_page_fault+0x471/0x71a
Aug 8 06:29:50 o kernel: [<c0116331>] do_page_fault+0x471/0x71a
Aug 8 06:29:50 o kernel: [nmi_stack_correct+28/42]
error_code+0x2b/0x30
Aug 8 06:29:50 o kernel: [<c01039cb>] error_code+0x2b/0x30
Aug 8 06:29:50 o kernel: [con_insert_unipair+90/240]
kobject_get_path+0x1a/0x70
Aug 8 06:29:50 o kernel: [<c026b15a>] kobject_get_path+0x1a/0x70
Aug 8 06:29:50 o kernel: [skb_copy_bits+377/624]
class_hotplug+0x69/0x1a0
Aug 8 06:29:50 o kernel: [<c02d9b29>] class_hotplug+0x69/0x1a0
Aug 8 06:29:50 o kernel: [set_selection+1084/1264]
kobject_hotplug+0x1bc/0x2a0
Aug 8 06:29:50 o kernel: [<c026be0c>] kobject_hotplug+0x1bc/0x2a0
Aug 8 06:29:50 o kernel: [con_set_default_unimap+10/384]
kobject_del+0x1a/0x30
Aug 8 06:29:50 o kernel: [<c026b50a>] kobject_del+0x1a/0x30
Aug 8 06:29:50 o kernel: [skb_checksum+436/720]
class_device_del+0xa4/0xc0
Aug 8 06:29:50 o kernel: [<c02d9fc4>] class_device_del+0xa4/0xc0
Aug 8 06:29:50 o kernel: [skb_checksum+482/720]
class_device_unregister+0x12/0x20
Aug 8 06:29:50 o kernel: [<c02d9ff2>]
class_device_unregister+0x12/0x20
Aug 8 06:29:50 o kernel: [pg0+944182553/1068971008]
snd_unregister_device+0xa9/0x100 [snd]
Aug 8 06:29:50 o kernel: [<f88fc519>]
snd_unregister_device+0xa9/0x100 [snd]
Aug 8 06:29:50 o kernel: [pg0+944273044/1068971008]
snd_pcm_dev_unregister+0x64/0xd0 [snd-pcm]
Aug 8 06:29:50 o kernel: [<f8912694>]
snd_pcm_dev_unregister+0x64/0xd0 [snd-pcm]
Aug 8 06:29:50 o kernel: [pg0+944203590/1068971008]
snd_device_free+0xa6/0xc0 [snd]
Aug 8 06:29:50 o kernel: [<f8901746>] snd_device_free+0xa6/0xc0
[snd]
Aug 8 06:29:50 o kernel: [pg0+944204148/1068971008]
snd_device_free_all+0x54/0x70 [snd]
Aug 8 06:29:50 o kernel: [<f8901974>] snd_device_free_all+0x54/0x70
[snd]
Aug 8 06:29:51 o kernel: [pg0+944184179/1068971008]
snd_card_free+0x93/0x290 [snd]
Aug 8 06:29:51 o kernel: [<f88fcb73>] snd_card_free+0x93/0x290 [snd]
Aug 8 06:29:51 o kernel: [pg0+944184732/1068971008]
snd_card_free_thread+0x2c/0x70 [snd]
Aug 8 06:29:51 o kernel: [<f88fcd9c>] snd_card_free_thread+0x2c/0x70
[snd]
Aug 8 06:29:51 o kernel: [sys_timer_delete+134/192]
worker_thread+0x186/0x230
Aug 8 06:29:51 o kernel: [<c0185996>] worker_thread+0x186/0x230
Aug 8 06:29:51 o kernel: [__symbol_get+12/112] kthread+0x9c/0xd0
Aug 8 06:29:51 o kernel: [<c018956c>] kthread+0x9c/0xd0
Aug 8 06:29:51 o kernel: [kernel_thread+5/192]
kernel_thread_helper+0x5/0x10
Aug 8 06:29:51 o kernel: [<c0101315>] kernel_thread_helper+0x5/0x10
Aug 8 06:29:51 o kernel: Code: 89 34 24 e8 da bc f8 ff eb dd 90 8d b4
26 00 00 00 00 55 89 e5 57 8b 55 08 56 be 01 00 00 00 53 31 db 8b 3a
b9 ff ff ff ff 89 d8 <f2> ae f7 d1 49 8b 52 24 8d 74 3
1 01 85 d2 75 e7 5b 89 f0 5e 5f
OR
Aug 8 23:54:02 o kernel: Unable to handle kernel NULL pointer
dereference at virtual address 00
000000
Aug 8 23:54:02 o su(pam_unix)[8638]: session closed for user root
Aug 8 23:54:02 o su(pam_unix)[9094]: session closed for user root
Aug 8 23:54:03 o su(pam_unix)[10551]: session closed for user root
Aug 8 23:54:03 o kernel: printing eip:
Aug 8 23:54:03 o kernel: c026b0d9
Aug 8 23:54:03 o kernel: *pde = 349c4001
Aug 8 23:54:03 o kernel: Oops: 0000 [#1]
Aug 8 23:54:03 o kernel: Modules linked in: ip_nat_irc
ip_conntrack_irc ip_nat_ftp ip_conntrack
_ftp ipt_MASQUERADE ipt_TCPMSS snd-usb-audio snd-usb-lib snd-seq-dummy
snd-seq-oss snd-seq-midi-ev
ent snd-seq snd-pcm-oss snd-mixer-oss snd-emu10k1 snd-rawmidi
snd-seq-device snd-ac97-codec snd-pc
m snd-timer snd-page-alloc snd-util-mem snd-hwdep snd soundcore
cpufreq_powersave cpuid cpu5wdt ev
dev pcspkr ip6t_LOG ip6t_limit ip6table_filter ip6table_mangle
ip6_tables ipt_TOS ipt_state ipt_RE
JECT ipt_LOG ipt_limit iptable_filter iptable_mangle iptable_nat
ip_conntrack ip_tables md5 ipv6 p
pp_async ppp_generic slhc af_packet cpufreq_ondemand eeprom asb100
i2c-sensor eagle-usb i2c-viapro
ircomm-tty ircomm irda crc-ccitt floppy raw ide-floppy ide-tape
eth1394 8139too mii ide-cd ohci13
94 ieee1394 sg st sr_mod sd_mod scsi_mod loop via-agp bt878 tuner
tvaudio bttv video-buf firmware_
class i2c-algo-bit v4l2-common btcx-risc tveeprom i2c-core nvidia
agpgart usblp ehci-hcd uhci-hcd
pwc videodev usbcore video thermal tc1100-w
Aug 8 23:54:03 o kernel: i processor fan container button battery ac
Aug 8 23:54:03 o kernel: CPU: 0
Aug 8 23:54:03 o kernel: EIP: 0060:[con_unify_unimap+329/368]
Tainted: P VLI
Aug 8 23:54:03 o kernel: EIP: 0060:[<c026b0d9>] Tainted: P
VLI
Aug 8 23:54:03 o kernel: EFLAGS: 00010246 (2.6.11-12mdkcustom)
Aug 8 23:54:03 o kernel: EIP is at get_kobj_path_length+0x19/0x30
Aug 8 23:54:03 o kernel: eax: 00000000 ebx: 00000000 ecx:
ffffffff edx: f622e888
Aug 8 23:54:03 o kernel: esi: 00000001 edi: 00000000 ebp:
c1b29d58 esp: c1b29d4c
Aug 8 23:54:03 o kernel: ds: 007b es: 007b ss: 0068
Aug 8 23:54:03 o kernel: Process events/0 (pid: 3,
threadinfo=c1b28000 task=c1af3020)
Aug 8 23:54:03 o kernel: Stack: c0415200 f622e864 f5c6bc78 c1b29d7c
c026b15a f622e888 f5ca7504
00000286
Aug 8 23:54:03 o kernel: 00000003 c0415200 f622e864 f5c6bc78
c1b29dc0 c02d9b29 f622e888
000000d0
Aug 8 23:54:03 o kernel: f5c6bc60 f622e82c c1b29dac c026eb47
f622e82c 09dd17d4 00000000
f54510ec
Aug 8 23:54:04 o kernel: Call Trace:
Aug 8 23:54:04 o kernel: [show_registers+159/464]
show_stack+0x7f/0xa0Aug 8 23:54:04 o kernel: [<c0103d2f>]
show_stack+0x7f/0xa0
Aug 8 23:54:04 o kernel: [handle_BUG+106/192]
show_registers+0x15a/0x1d0
Aug 8 23:54:04 o kernel: [<c0103eca>] show_registers+0x15a/0x1d0
Aug 8 23:54:04 o kernel: [do_trap+62/240] die+0xce/0x160
Aug 8 23:54:04 o kernel: [<c01040ae>] die+0xce/0x160
Aug 8 23:54:04 o kernel: [do_page_fault+1073/1818]
do_page_fault+0x471/0x71a
Aug 8 23:54:04 o kernel: [<c0116331>] do_page_fault+0x471/0x71a
Aug 8 23:54:04 o kernel: [nmi_stack_correct+28/42]
error_code+0x2b/0x30
Aug 8 23:54:04 o kernel: [<c01039cb>] error_code+0x2b/0x30
Aug 8 23:54:04 o kernel: [con_insert_unipair+90/240]
kobject_get_path+0x1a/0x70
Aug 8 23:54:04 o kernel: [<c026b15a>] kobject_get_path+0x1a/0x70
Aug 8 23:54:04 o kernel: [skb_copy_bits+377/624]
class_hotplug+0x69/0x1a0
Aug 8 23:54:04 o kernel: [<c02d9b29>] class_hotplug+0x69/0x1a0
Aug 8 23:54:04 o kernel: [set_selection+1084/1264]
kobject_hotplug+0x1bc/0x2a0
Aug 8 23:54:04 o kernel: [<c026be0c>] kobject_hotplug+0x1bc/0x2a0
Aug 8 23:54:04 o kernel: [con_set_default_unimap+10/384]
kobject_del+0x1a/0x30
Aug 8 23:54:04 o kernel: [<c026b50a>] kobject_del+0x1a/0x30
Aug 8 23:54:04 o kernel: [skb_checksum+436/720]
class_device_del+0xa4/0xc0
Aug 8 23:54:04 o kernel: [<c02d9fc4>] class_device_del+0xa4/0xc0
Aug 8 23:54:04 o kernel: [skb_checksum+482/720]
class_device_unregister+0x12/0x20
Aug 8 23:54:04 o kernel: [<c02d9ff2>]
class_device_unregister+0x12/0x20
Aug 8 23:54:04 o kernel: [pg0+943764761/1068971008]
snd_unregister_device+0xa9/0x100 [snd]
Aug 8 23:54:04 o kernel: [<f8896519>]
snd_unregister_device+0xa9/0x100 [snd]
Aug 8 23:54:04 o kernel: [pg0+944211604/1068971008]
snd_pcm_dev_unregister+0x64/0xd0 [snd-pcm]
Aug 8 23:54:04 o kernel: [<f8903694>]
snd_pcm_dev_unregister+0x64/0xd0 [snd-pcm]
Aug 8 23:54:04 o kernel: [pg0+943785798/1068971008]
snd_device_free+0xa6/0xc0 [snd]
Aug 8 23:54:04 o kernel: [<f889b746>] snd_device_free+0xa6/0xc0
[snd]
Aug 8 23:54:04 o kernel: [pg0+943786356/1068971008]
snd_device_free_all+0x54/0x70 [snd]
Aug 8 23:54:04 o kernel: [<f889b974>] snd_device_free_all+0x54/0x70
[snd]
Aug 8 23:54:04 o kernel: [pg0+943766387/1068971008]
snd_card_free+0x93/0x290 [snd]
Aug 8 23:54:04 o kernel: [<f8896b73>] snd_card_free+0x93/0x290 [snd]
Aug 8 23:54:04 o kernel: [pg0+943766940/1068971008]
snd_card_free_thread+0x2c/0x70 [snd]
Aug 8 23:54:04 o kernel: [<f8896d9c>] snd_card_free_thread+0x2c/0x70
[snd]
Aug 8 23:54:04 o kernel: [sys_timer_delete+134/192]
worker_thread+0x186/0x230
Aug 8 23:54:04 o kernel: [<c0185996>] worker_thread+0x186/0x230
Aug 8 23:54:04 o kernel: [__symbol_get+12/112] kthread+0x9c/0xd0
Aug 8 23:54:04 o kernel: [<c018956c>] kthread+0x9c/0xd0
Aug 8 23:54:04 o kernel: [kernel_thread+5/192]
kernel_thread_helper+0x5/0x10
Aug 8 23:54:04 o kernel: [<c0101315>] kernel_thread_helper+0x5/0x10
Aug 8 23:54:04 o kernel: Code: 89 34 24 e8 da bc f8 ff eb dd 90 8d b4
26 00 00 00 00 55 89 e5 5
7 8b 55 08 56 be 01 00 00 00 53 31 db 8b 3a b9 ff ff ff ff 89 d8 <f2>
ae f7 d1 49 8b 52 24 8d 74 3
1 01 85 d2 75 e7 5b 89 f0 5e 5f
cat /proc/interrupts
CPU0
0: 64851118 IO-APIC-edge timer
1: 17356 IO-APIC-edge i8042
8: 70540 IO-APIC-edge rtc
9: 1 IO-APIC-level acpi
12: 1088765 IO-APIC-edge i8042
14: 1933706 IO-APIC-edge ide0
15: 14 IO-APIC-edge ide1
16: 4558899 IO-APIC-level uhci_hcd, bttv0, bt878, nvidia
17: 1161 IO-APIC-level ehci_hcd, ohci1394, eth0
18: 148797 IO-APIC-level EMU10K1
19: 13530877 IO-APIC-level uhci_hcd, eth1
21: 13539350 IO-APIC-level uhci_hcd, uhci_hcd
NMI: 0
LOC: 64858492
ERR: 0
MIS: 0
it is not apic problem, i disabled it, and it didn't help
Linux o 2.6.11-12mdkcustom #2 Sat Aug 6 11:02:20 CEST 2005 i686 AMD
Duron(TM) unknown GNU/Linux
lsmod
Module Size Used by
ip_nat_irc 1600 0
ip_conntrack_irc 70544 1 ip_nat_irc
ip_nat_ftp 2304 0
ip_conntrack_ftp 71568 1 ip_nat_ftp
ipt_MASQUERADE 3336 1
ipt_TCPMSS 3328 1
snd-usb-audio 65344 4
snd-usb-lib 13696 1 snd-usb-audio
snd-seq-dummy 2628 0
snd-seq-oss 31168 0
snd-seq-midi-event 6272 1 snd-seq-oss
snd-seq 46928 5
snd-seq-dummy,snd-seq-oss,snd-seq-midi-event
snd-pcm-oss 48480 0
snd-mixer-oss 17088 7 snd-pcm-oss
snd-emu10k1 108484 8
snd-rawmidi 19872 2 snd-usb-lib,snd-emu10k1
snd-seq-device 6796 5
snd-seq-dummy,snd-seq-oss,snd-seq,snd-emu10k1,snd-rawmidi
snd-ac97-codec 74296 1 snd-emu10k1
snd-pcm 80008 4
snd-usb-audio,snd-pcm-oss,snd-emu10k1,snd-ac97-codec
snd-timer 20356 3 snd-seq,snd-emu10k1,snd-pcm
snd-page-alloc 7492 2 snd-emu10k1,snd-pcm
snd-util-mem 3264 1 snd-emu10k1
snd-hwdep 6880 1 snd-emu10k1
snd 46788 24
snd-usb-audio,snd-seq-oss,snd-seq,snd-pcm-oss,snd-mixer-oss,snd-emu10k1,snd-
rawmidi,snd-seq-device,snd-ac97-codec,snd-pcm,snd-timer,snd-hwdep
soundcore 7008 7 snd
cpufreq_powersave 1344 0
cpuid 2308 0
cpu5wdt 4444 0
evdev 7744 0
pcspkr 3108 0
ip6t_LOG 6784 6
ip6t_limit 1792 6
ip6table_filter 1984 1
ip6table_mangle 1856 0
ip6_tables 19008 4
ip6t_LOG,ip6t_limit,ip6table_filter,ip6table_mangle
ipt_TOS 1856 16
ipt_state 1408 6
ipt_REJECT 5504 40
ipt_LOG 6272 6
ipt_limit 1792 6
iptable_filter 2112 1
iptable_mangle 2048 1
iptable_nat 21340 4 ip_nat_irc,ip_nat_ftp,ipt_MASQUERADE
ip_conntrack 45568 7
ip_nat_irc,ip_conntrack_irc,ip_nat_ftp,ip_conntrack_ftp,ipt_MASQUERADE,ipt_s
tate,iptable_nat
ip_tables 20544 10
ipt_MASQUERADE,ipt_TCPMSS,ipt_TOS,ipt_state,ipt_REJECT,ipt_LOG,ipt_limit,ipt
able_filter,iptable_mangle,iptable_nat
md5 3712 1
ipv6 227968 28
ppp_async 9088 1
ppp_generic 24724 5 ppp_async
slhc 6592 1 ppp_generic
af_packet 16200 4
cpufreq_ondemand 5148 0
eeprom 5840 0
asb100 22036 0
i2c-sensor 2752 2 eeprom,asb100
i2c-viapro 6416 0
eagle-usb 122688 0
ircomm-tty 21256 0
ircomm 11460 1 ircomm-tty
irda 117880 2 ircomm-tty,ircomm
crc-ccitt 1664 2 ppp_async,irda
floppy 54032 0
raw 6688 0
eth1394 17160 0
ide-floppy 16960 0
8139too 21376 0
mii 4224 1 8139too
ide-tape 33424 0
ide-cd 36484 0
ohci1394 31108 0
ieee1394 292088 2 eth1394,ohci1394
sg 34076 0
st 35804 0
sr_mod 15268 0
sd_mod 15824 0
scsi_mod 114696 4 sg,st,sr_mod,sd_mod
loop 13640 0
via-agp 7424 1
bt878 8472 0
tuner 25256 0
tvaudio 21412 0
bttv 145552 1 bt878
video-buf 16772 1 bttv
firmware_class 7488 1 bttv
i2c-algo-bit 8392 1 bttv
v4l2-common 4736 1 bttv
btcx-risc 3848 1 bttv
tveeprom 11480 1 bttv
i2c-core 18964 9
eeprom,asb100,i2c-sensor,i2c-viapro,tuner,tvaudio,bttv,i2c-algo-bit,tveeprom
nvidia 3905276 12
agpgart 28136 2 via-agp,nvidia
usblp 10688 0
ehci-hcd 28168 0
uhci-hcd 28624 0
pwc 78836 1
videodev 7296 3 bttv,pwc
usbcore 104984 8
snd-usb-audio,snd-usb-lib,eagle-usb,usblp,ehci-hcd,uhci-hcd,pwc
video 13892 0
thermal 10632 0
tc1100-wmi 5188 0
processor 19252 1 thermal
fan 3140 0
container 3072 0
button 4880 0
battery 7492 0
ac 3332 0
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: my kernel sometimes did a crash, but no panic
[not found] <4zEQ3-7Le-21@gated-at.bofh.it>
@ 2005-08-09 18:44 ` Bodo Eggert
2005-08-09 19:05 ` Michael Krufky
0 siblings, 1 reply; 7+ messages in thread
From: Bodo Eggert @ 2005-08-09 18:44 UTC (permalink / raw)
To: klasyk99, linux-kernel
Klasyk <klasyk99@poczta.onet.pl> wrote:
> my kernel sometimes did a crash, but no panic
> Keyboard hunged up :(
> Network were working and I can log in. Without the keybord - it
> generally worked.
>
> In logs:
> for example:
>
> Aug 6 15:30:02 o kernel: Unable to handle kernel NULL pointer
> dereference at virtual address 00
> 000000
> Aug 6 15:30:02 o kernel: printing eip:
> Aug 6 15:30:02 o kernel: c026b0d9
> Aug 6 15:30:02 o kernel: *pde = 3588d001
> Aug 6 15:30:02 o kernel: Oops: 0000 [#1]
> Aug 6 15:30:02 o kernel: Modules linked in: ip_nat_irc
[...]
> 4 ieee1394 loop via-agp bt878 tuner tvaudio bttv video-buf
^^^^
It's probably the same problem I had.
There is a recent patch enabling the no_overlay=1 parameter and some PCI
quirks to autotune this option. Please try that and, if your board isn't
autodetected, the lspci -vvv output and the exact name of your MB chipset.
I temporarily uploaded the patch to
http://7eggert.dyndns.org/l/scratch/v4l_bttv_no_overlay_linus.patch
--
Ich danke GMX dafür, die Verwendung meiner Adressen mittels per SPF
verbreiteten Lügen zu sabotieren.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: my kernel sometimes did a crash, but no panic
2005-08-09 18:44 ` my kernel sometimes did a crash, but no panic Bodo Eggert
@ 2005-08-09 19:05 ` Michael Krufky
0 siblings, 0 replies; 7+ messages in thread
From: Michael Krufky @ 2005-08-09 19:05 UTC (permalink / raw)
To: 7eggert; +Cc: klasyk99, linux-kernel, Mauro Carvalho Chehab
Bodo Eggert wrote:
>Klasyk <klasyk99@poczta.onet.pl> wrote:
>
>
>>my kernel sometimes did a crash, but no panic
>>Keyboard hunged up :(
>>Network were working and I can log in. Without the keybord - it
>>generally worked.
>>
>>In logs:
>>for example:
>>
>>Aug 6 15:30:02 o kernel: Unable to handle kernel NULL pointer
>>dereference at virtual address 00
>>000000
>>Aug 6 15:30:02 o kernel: printing eip:
>>Aug 6 15:30:02 o kernel: c026b0d9
>>Aug 6 15:30:02 o kernel: *pde = 3588d001
>>Aug 6 15:30:02 o kernel: Oops: 0000 [#1]
>>Aug 6 15:30:02 o kernel: Modules linked in: ip_nat_irc
>>
>>
>[...]
>
>
>>4 ieee1394 loop via-agp bt878 tuner tvaudio bttv video-buf
>>
>>
> ^^^^
>It's probably the same problem I had.
>
>There is a recent patch enabling the no_overlay=1 parameter and some PCI
>quirks to autotune this option. Please try that and, if your board isn't
>autodetected, the lspci -vvv output and the exact name of your MB chipset.
>
>I temporarily uploaded the patch to
>http://7eggert.dyndns.org/l/scratch/v4l_bttv_no_overlay_linus.patch
>
>
I don't know if this is the same problem... Let's hope that it IS the
same problem, because the fix that Bodo speaks of has already been
included in 2.6.13-rc6:
http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=history;h=00dd1e433967872f3997a45d5adf35056fdf2f56;f=drivers/media/video/bttv-driver.c
Please test again using Kernel 2.6.13-rc6 and let us know if the problem
persists.
--
Michael Krufky
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: my kernel sometimes did a crash, but no panic
2005-08-09 16:04 Klasyk
@ 2005-08-09 19:18 ` Mauro Carvalho Chehab
[not found] ` <1123618340.2484.9.camel@KKK>
2005-08-09 20:21 ` Adrian Bunk
1 sibling, 1 reply; 7+ messages in thread
From: Mauro Carvalho Chehab @ 2005-08-09 19:18 UTC (permalink / raw)
To: klasyk99; +Cc: linux-kernel
Klasyk,
Were you using bttv at the time you had this oops? It doesn't look to
be related. Maybe you can also send us some logs about your system init
and some description about your configuration. What's your Motherboard?
What PCI chipset does it use?
Cheers,
Mauro.
Em Ter, 2005-08-09 às 18:04 +0200, Klasyk escreveu:
> my kernel sometimes did a crash, but no panic
> Keyboard hunged up :(
> Network were working and I can log in. Without the keybord - it
> generally worked.
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: my kernel sometimes did a crash, but no panic
@ 2005-08-09 20:14 klasyk99
0 siblings, 0 replies; 7+ messages in thread
From: klasyk99 @ 2005-08-09 20:14 UTC (permalink / raw)
To: linux-kernel
Dnia 09-08-2005, wto o godzinie 16:18 -0300, Mauro Carvalho Chehab
napisał(a):
> Klasyk,
>
> Were you using bttv at the time you had this oops? It doesn't
look to
> be related.
my modprobe.conf:
alias char-major-89 i2c-dev
snd-cmipci && { /sbin/modprobe snd-pcm-oss; /bin/true; }
alias ieee1394-controller ohci1394
alias eth1 8139too
alias eth0 8139too
options bttv card=72 pll=1 tuner=28 radio=1 video_nr=2
options lirc_gpio gpio_mask=0x1f00 gpio_lock_mask=0x8000 gpio_xor_mask=0
soft_gap=500 sample_rate=12
options pwc dev_hint=740:5,740:9 power_save=0 compression=1 size=vga
fps=5
alias net-pf-10 ipv6
alias /dev/nvidia* nvidia
alias eth2 eth1394
options snd device_mode=0666
alias snd-card-0 snd-emu10k1
alias sound-slot-0 snd-emu10k1
install usb-interface /sbin/modprobe uhci-hcd; /sbin/modprobe
ehci-hcd; /bin/true
I don't use tv on bttv, only radio.
I'm not sure, but maybe the crash was, when i disable
the /usr/bin/radio. But not sure. Maybe the "q" key in radio
was the last one what i did.
> Maybe you can also send us some logs about your system init
> and some description about your configuration. What's your
Motherboard?
> What PCI chipset does it use?
It is asus a7v333 on via 333. Duron 1300 without overcloking.
2x philips webcam pcvc740k, dsl eagle usb, bttv with radio,
sb live, 2xeth, 1xeth1394
lspci -vvv
00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333]
Subsystem: ASUSTeK Computer Inc. A7V333 Mainboard
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW-
Rate=x4
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333 AGP] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR+
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000dfff
Memory behind bridge: eb000000-ec6fffff
Prefetchable memory behind bridge: edf00000-efffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A
IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc.: Unknown device 808d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 35 (500ns min, 1000ns max), cache line size 08
Interrupt: pin A routed to IRQ 17
Region 0: Memory at ea800000 (32-bit, non-prefetchable)
[size=2K]
Region 1: Memory at ea000000 (32-bit, non-prefetchable)
[size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1
+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
00:09.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 50) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc.: Unknown device 8080
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin A routed to IRQ 19
Region 4: I/O ports at d800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0
+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 50) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc.: Unknown device 8080
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin B routed to IRQ 16
Region 4: I/O ports at d400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0
+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) (prog-if
20 [EHCI])
Subsystem: ASUSTeK Computer Inc.: Unknown device 8080
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 10
Interrupt: pin C routed to IRQ 17
Region 0: Memory at e9800000 (32-bit, non-prefetchable)
[size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0
+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0d.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (4000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ed000000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0d.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture
(rev 11)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ec800000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at d000 [size=256]
Region 1: Memory at e9000000 (32-bit, non-prefetchable)
[size=256]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1
+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev
04)
Subsystem: Creative Labs CT4850 SBLive! Value
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at b800 [size=32]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.1 Input device controller: Creative Labs SB Live! MIDI/Game Port
(rev 01)
Subsystem: Creative Labs Gameport Joystick
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 0: I/O ports at b400 [size=8]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at b000 [size=256]
Region 1: Memory at e8800000 (32-bit, non-prefetchable)
[size=256]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1
+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.0 ISA bridge: VIA Technologies, Inc. VT8233A ISA Bridge
Subsystem: ASUSTeK Computer Inc.: Unknown device 808c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
(prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. A7V8X motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 0
Region 4: I/O ports at a800 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 23) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. VT6202 USB2.0 4 port controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 21
Region 4: I/O ports at a400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 23) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. VT6202 USB2.0 4 port controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 21
Region 4: I/O ports at a000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: nVidia Corporation NV5 [RIVA
TNT2/TNT2 Pro] (rev 15) (prog-if 00 [VGA])
Subsystem: nVidia Corporation RIVA TNT2 Pro
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at eb000000 (32-bit, non-prefetchable)
[size=16M]
Region 1: Memory at ee000000 (32-bit, prefetchable) [size=32M]
Expansion ROM at edff0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=32 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit-
FW- Rate=x4
Log when the system started:
(I mixed a little in scripts with the usb drivers when linux is loading)
Aug 8 23:56:55 o syslogd 1.4.1: restart.
Aug 8 23:56:56 o dhclient: eth2: unknown hardware address type 24
Aug 8 23:56:56 o kernel: klogd 1.4.1, log source = /proc/kmsg started.
Aug 8 23:56:56 o kernel: Inspecting /boot/System.map
Aug 8 23:56:56 o kernel: Loaded 20310 symbols from /boot/System.map.
Aug 8 23:56:56 o kernel: Symbols match kernel version 2.6.11.
Aug 8 23:56:56 o kernel: No module symbols loaded - kernel modules not
enabled.
Aug 8 23:56:56 o kernel: Linux version 2.6.11-12mdkcustom (root@o) (gcc
version 3.4.3 (Mandrakelinux 10.2 3.4.3-7mdk)) #
2 Sat Aug 6 11:02:20 CEST 2005
Aug 8 23:56:56 o kernel: BIOS-provided physical RAM map:
Aug 8 23:56:56 o kernel: BIOS-e820: 0000000000000000 -
000000000009fc00 (usable)
Aug 8 23:56:56 o kernel: BIOS-e820: 000000000009fc00 -
00000000000a0000 (reserved)
Aug 8 23:56:56 o kernel: BIOS-e820: 00000000000f0000 -
0000000000100000 (reserved)
Aug 8 23:56:56 o kernel: BIOS-e820: 0000000000100000 -
000000004fffc000 (usable)
Aug 8 23:56:56 o kernel: BIOS-e820: 000000004fffc000 -
000000004ffff000 (ACPI data)
Aug 8 23:56:56 o kernel: BIOS-e820: 000000004ffff000 -
0000000050000000 (ACPI NVS)
Aug 8 23:56:56 o partmon: Sprawdzanie czy na partycjach jest
wystarczająca ilość miejsca:
Aug 8 23:56:56 o kernel: BIOS-e820: 00000000fec00000 -
00000000fec01000 (reserved)
Aug 8 23:56:56 o kernel: BIOS-e820: 00000000fee00000 -
00000000fee01000 (reserved)
Aug 8 23:56:56 o kernel: BIOS-e820: 00000000ffff0000 -
0000000100000000 (reserved)
Aug 8 23:56:56 o kernel: 383MB HIGHMEM available.
Aug 8 23:56:57 o kernel: 896MB LOWMEM available.
Aug 8 23:56:57 o kernel: On node 0 totalpages: 327676
Aug 8 23:56:57 o kernel: DMA zone: 4096 pages, LIFO batch:1
Aug 8 23:56:57 o kernel: Normal zone: 225280 pages, LIFO batch:16
Aug 8 23:56:57 o kernel: HighMem zone: 98300 pages, LIFO batch:16
Aug 8 23:56:57 o kernel: DMI 2.3 present.
Aug 8 23:56:57 o kernel: ACPI: RSDP (v000
ASUS ) @ 0x000f5c30
Aug 8 23:56:57 o kernel: ACPI: RSDT (v001 ASUS A7V333 0x42302e31
MSFT 0x31313031) @ 0x4fffc000
Aug 8 23:56:57 o partmon: ^[[65G
Aug 8 23:56:57 o kernel: ACPI: FADT (v001 ASUS A7V333 0x42302e31
MSFT 0x31313031) @ 0x4fffc0b2
Aug 8 23:56:57 o partmon:
Aug 8 23:56:57 o kernel: ACPI: BOOT (v001 ASUS A7V333 0x42302e31
MSFT 0x31313031) @ 0x4fffc030
Aug 8 23:56:57 o rc: Uruchamianie partmon: succeeded
Aug 8 23:56:57 o kernel: ACPI: MADT (v001 ASUS A7V333 0x42302e31
MSFT 0x31313031) @ 0x4fffc058
Aug 8 23:56:57 o kernel: ACPI: DSDT (v001 ASUS A7V333 0x00001000
MSFT 0x0100000b) @ 0x00000000
Aug 8 23:56:57 o kernel: ACPI: PM-Timer IO Port: 0xe408
Aug 8 23:56:57 o kernel: ACPI: Local APIC address 0xfee00000
Aug 8 23:56:58 o dhclient: DHCPDISCOVER on eth2 to 255.255.255.255 port
67 interval 6
Aug 8 23:56:58 o kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00]
enabled)
Aug 8 23:56:58 o xfs: Uruchamianie xfs succeeded
Aug 8 23:55:25 o rc.sysinit: Setting default font (lat2-sun16):
succeeded
Aug 8 23:56:58 o xfs[5533]: ignoring font path
element /usr/X11R6/lib/X11/fonts/drakfont/Type1 (unreadable)
Aug 8 23:56:58 o kernel: Processor #0 6:7 APIC version 16
Aug 8 23:55:25 o rc.sysinit: Montowanie systemu plików proc succeeded
Aug 8 23:56:58 o xfs[5533]: ignoring font path
element /usr/X11R6/lib/X11/fonts/drakfont/ttf (unreadable)
Aug 8 23:56:58 o kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge
lint[0x1])
Aug 8 23:55:25 o rc.sysinit: Montowanie sysfs na /sys succeeded
Aug 8 23:56:58 o numlock: Uruchamianie klawiatury numerycznej:
Aug 8 23:56:58 o xfs[5533]: ignoring font path
element /usr/X11R6/lib/X11/fonts/100dpi:unscaled (unreadable)
Aug 8 23:56:58 o kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000]
gsi_base[0])
Aug 8 23:55:25 o devfsd: Started device management daemon v1.3.25
for /dev
Aug 8 23:56:58 o numlock:
Aug 8 23:56:59 o kernel: IOAPIC[0]: apic_id 2, version 2, address
0xfec00000, GSI 0-23
Aug 8 23:55:26 o devfsd: error
execing: /etc/dynamic/scripts/part.script^INo such file or directory
Aug 8 23:56:59 o kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq
2 dfl edge)
Aug 8 23:56:59 o rc: Uruchamianie numlock: succeeded
Aug 8 23:55:26 o devfsd: error
execing: /etc/dynamic/scripts/part.script^INo such file or directory
Aug 8 23:56:59 o kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq
9 low level)
Aug 8 23:55:26 o devfsd: error
execing: /etc/dynamic/scripts/part.script^INo such file or directory
Aug 8 23:56:59 o kernel: ACPI: IRQ0 used by override.
Aug 8 23:55:26 o devfsd: error
execing: /etc/dynamic/scripts/part.script^INo such file or directory
Aug 8 23:57:00 o kernel: ACPI: IRQ2 used by override.
Aug 8 23:55:28 o rc.sysinit: Uruchamianie demona DevFs succeeded
Aug 8 23:57:00 o kernel: ACPI: IRQ9 used by override.
Aug 8 23:55:28 o rc.sysinit: Konfiguracja parametrów jądra: succeeded
Aug 8 23:57:00 o kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
Aug 8 23:55:28 o pam_console.dev[1046]: Restoring console permissions
for /dev/vcs1
Aug 8 23:57:00 o kernel: Using ACPI (MADT) for SMP configuration
information
Aug 8 23:55:28 o pam_console.dev[1047]: Restoring console permissions
for /dev/vcsa1
Aug 8 23:57:00 o su(pam_unix)[5660]: session opened for user nobody by
(uid=0)
Aug 8 23:57:00 o kernel: Allocating PCI resources starting at 50000000
(gap: 50000000:aec00000)
Aug 8 23:55:28 o devfsd[1032]: error calling: "unlink" in "GLOBAL"
Aug 8 23:57:00 o kernel: Built 1 zonelists
Aug 8 23:55:28 o devfsd[1032]: error calling: "unlink" in "GLOBAL"
Aug 8 23:57:00 o kernel: mapped APIC to ffffd000 (fee00000)
Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcsa1" to
"/lib/dev-state/vcsa1"
Aug 8 23:57:00 o kernel: mapped IOAPIC to ffffc000 (fec00000)
Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcsa1" to
"/lib/dev-state/vcsa1"
Aug 8 23:57:01 o kernel: Initializing CPU#0
Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcsa1" to
"/lib/dev-state/vcsa1"
Aug 8 23:57:01 o kernel: Kernel command line:
BOOT_IMAGE=MOJ_2_6_11____12 ro root=301 resume=/dev/hda5 devfs=mount
Aug 8 23:55:28 o pam_console.dev[1090]: Restoring console permissions
for /dev/vcsa1
Aug 8 23:57:01 o su(pam_unix)[5660]: session closed for user nobody
Aug 8 23:57:01 o kernel: PID hash table entries: 4096 (order: 12, 65536
bytes)
Aug 8 23:55:29 o devfsd[1032]: error copying: "/dev/vcs1" to
"/lib/dev-state/vcs1"
Aug 8 23:57:01 o mDNSResponder: Uruchamianie succeeded
Aug 8 23:57:01 o kernel: Detected 1303.663 MHz processor.
Aug 8 23:55:29 o devfsd[1032]: error copying: "/dev/vcs1" to
"/lib/dev-state/vcs1"
Aug 8 23:57:01 o kernel: Using pmtmr for high-res timesource
Aug 8 23:55:29 o devfsd[1032]: error copying: "/dev/vcs1" to
"/lib/dev-state/vcs1"
Aug 8 23:57:01 o kernel: Console: colour VGA+ 80x25
Aug 8 23:55:29 o devfsd[1032]: error calling: "unlink" in "GLOBAL"
Aug 8 23:57:01 o kernel: Dentry cache hash table entries: 131072
(order: 7, 524288 bytes)
Aug 8 23:55:29 o pam_console.dev[1106]: Restoring console permissions
for /dev/vcs1
Aug 8 23:57:02 o kernel: Inode-cache hash table entries: 65536 (order:
6, 262144 bytes)
Aug 8 23:57:02 o atd: Uruchamianie atd succeeded
Aug 8 23:55:27 o devfsd[1032]: error calling: "unlink" in "GLOBAL"
Aug 8 23:57:02 o kernel: Memory: 1294696k/1310704k available (2635k
kernel code, 15188k reserved, 765k data, 268k init, 39
3200k highmem, 0k BadRAM)
Aug 8 23:55:27 o devfsd[1032]: error copying: "/dev/vcsa1" to
"/lib/dev-state/vcsa1"
Aug 8 23:57:02 o kernel: Checking if this processor honours the WP bit
even in supervisor mode... Ok.
Aug 8 23:55:27 o devfsd[1032]: error copying: "/dev/vcsa1" to
"/lib/dev-state/vcsa1"
Aug 8 23:57:02 o kernel: Calibrating delay loop... 2580.48 BogoMIPS
(lpj=1290240)
Aug 8 23:57:02 o smartd[5715]: smartd version 5.33
[i586-mandrake-linux-gnu] Copyright (C) 2002-4 Bruce Allen
Aug 8 23:55:27 o devfsd[1032]: error copying: "/dev/vcsa1" to
"/lib/dev-state/vcsa1"
Aug 8 23:57:02 o kernel: Mount-cache hash table entries: 512 (order: 0,
4096 bytes)
Aug 8 23:57:02 o smartd[5715]: Home page is
http://smartmontools.sourceforge.net/
Aug 8 23:55:27 o date: Mon Aug 8 23:55:27 CEST 2005
Aug 8 23:57:02 o kernel: CPU: After generic identify, caps: 0383fbff
c1c3fbff 00000000 00000000 00000000 00000000 00000000
Aug 8 23:57:02 o smartd[5715]: Opened configuration
file /etc/smartd.conf
Aug 8 23:55:27 o rc.sysinit: Ustawianie zegara (utc): Mon Aug 8
23:55:27 CEST 2005 succeeded
Aug 8 23:57:02 o kernel: CPU: After vendor identify, caps: 0383fbff
c1c3fbff 00000000 00000000 00000000 00000000 00000000
Aug 8 23:57:02 o smartd[5715]: Configuration file /etc/smartd.conf was
parsed, found DEVICESCAN, scanning devices
Aug 8 23:55:27 o pam_console.dev[1137]: Restoring console permissions
for /dev/vcsa1
Aug 8 23:57:02 o kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache
64K (64 bytes/line)
Aug 8 23:57:02 o smartd[5715]: Device: /dev/hda, opened
Aug 8 23:55:27 o devfsd[1032]: error copying: "/dev/vcs1" to
"/lib/dev-state/vcs1"
Aug 8 23:57:02 o kernel: CPU: L2 Cache: 64K (64 bytes/line)
Aug 8 23:55:27 o devfsd[1032]: error copying: "/dev/vcs1" to
"/lib/dev-state/vcs1"
Aug 8 23:57:02 o smartd[5715]: Device: /dev/hda, found in smartd
database.
Aug 8 23:57:02 o kernel: CPU: After all inits, caps: 0383fbff c1c3fbff
00000000 00000020 00000000 00000000 00000000
Aug 8 23:55:27 o devfsd[1032]: error copying: "/dev/vcs1" to
"/lib/dev-state/vcs1"
Aug 8 23:57:02 o smartd[5715]: Device: /dev/hda, enabled SMART
Attribute Autosave.
Aug 8 23:57:02 o kernel: Intel machine check architecture supported.
Aug 8 23:55:27 o rc.sysinit: Ładowanie domyślnej mapy klawiatury
succeeded
Aug 8 23:57:03 o kernel: Intel machine check reporting enabled on
CPU#0.
Aug 8 23:57:03 o smartd[5715]: Device: /dev/hda, enabled SMART
Automatic Offline Testing.
Aug 8 23:55:27 o devfsd[1032]: error calling: "unlink" in "GLOBAL"
Aug 8 23:57:03 o kernel: CPU: AMD Duron(TM) stepping 01
Aug 8 23:57:03 o smartd[5715]: Device: /dev/hda, appears to lack SMART
Self-Test log; disabling -l selftest (override with
-T permissive Directive)
Aug 8 23:55:27 o pam_console.dev[1160]: Restoring console permissions
for /dev/vcs1
Aug 8 23:57:03 o kernel: Enabling fast FPU save and restore... done.
Aug 8 23:57:03 o smartd[5715]: Device: /dev/hda, appears to lack SMART
Error log; disabling -l error (override with -T per
missive Directive)
Aug 8 23:55:27 o devfsd[1032]: error calling: "unlink" in "GLOBAL"
Aug 8 23:57:03 o kernel: Enabling unmasked SIMD FPU exception
support... done.
Aug 8 23:57:03 o smartd[5715]: Device: /dev/hda, is SMART capable.
Adding to "monitor" list.
Aug 8 23:55:27 o devfsd[1032]: error copying: "/dev/vcsa1" to
"/lib/dev-state/vcsa1"
Aug 8 23:57:03 o kernel: Checking 'hlt' instruction... OK.
Aug 8 23:57:03 o smartd[5715]: Device: /dev/hdb, opened
Aug 8 23:55:27 o devfsd[1032]: error copying: "/dev/vcsa1" to
"/lib/dev-state/vcsa1"
Aug 8 23:57:03 o kernel: ENABLING IO-APIC IRQs
Aug 8 23:57:03 o smartd[5715]: Device: /dev/hdb, found in smartd
database.
Aug 8 23:55:27 o devfsd[1032]: error copying: "/dev/vcsa1" to
"/lib/dev-state/vcsa1"
Aug 8 23:57:03 o kernel: ..TIMER: vector=0x31 pin1=2 pin2=-1
Aug 8 23:57:03 o smartd[5715]: Device: /dev/hdb, enabled SMART
Attribute Autosave.
Aug 8 23:55:27 o rc.sysinit: Ustawianie nazwy hosta o: succeeded
Aug 8 23:57:03 o kernel: NET: Registered protocol family 16
Aug 8 23:57:04 o dhclient: DHCPDISCOVER on eth2 to 255.255.255.255 port
67 interval 8
Aug 8 23:55:27 o pam_console.dev[1185]: Restoring console permissions
for /dev/vcsa1
Aug 8 23:57:04 o smartd[5715]: Device: /dev/hdb, is SMART capable.
Adding to "monitor" list.
Aug 8 23:57:04 o kernel: PCI: Using configuration type 1
Aug 8 23:55:27 o devfsd[1032]: error copying: "/dev/vcs1" to
"/lib/dev-state/vcs1"
Aug 8 23:57:04 o smartd[5715]: Monitoring 2 ATA and 0 SCSI devices
Aug 8 23:57:04 o kernel: mtrr: v2.0 (20020519)
Aug 8 23:55:27 o devfsd[1032]: error copying: "/dev/vcs1" to
"/lib/dev-state/vcs1"
Aug 8 23:57:04 o kernel: ACPI: Subsystem revision 20050211
Aug 8 23:57:05 o smartd[5715]: Device: /dev/hdb, SMART Usage Attribute:
194 Temperature_Celsius changed from 76 to 75
Aug 8 23:55:27 o devfsd[1032]: error calling: "unlink" in "GLOBAL"
Aug 8 23:57:05 o kernel: ACPI: Interpreter enabled
Aug 8 23:57:05 o smartd[5717]: smartd has fork()ed into background
mode. New PID=5717.
Aug 8 23:55:27 o pam_console.dev[1213]: Restoring console permissions
for /dev/vcs1
Aug 8 23:57:05 o smartd: Uruchamianie smartd succeeded
Aug 8 23:57:05 o kernel: ACPI: Using IOAPIC for interrupt routing
Aug 8 23:55:28 o devfsd[1032]: error calling: "unlink" in "GLOBAL"
Aug 8 23:57:05 o kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6
7 10 *11 12 14 15)
Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcsa1" to
"/lib/dev-state/vcsa1"
Aug 8 23:57:05 o kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6
7 10 11 12 14 15) *9
Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcsa1" to
"/lib/dev-state/vcsa1"
Aug 8 23:57:05 o kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6
7 10 11 12 14 15)
Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcsa1" to
"/lib/dev-state/vcsa1"
Aug 8 23:57:06 o kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6
7 10 11 12 14 15) *9
Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcs1" to
"/lib/dev-state/vcs1"
Aug 8 23:57:06 o kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6
7 *10 11 12 14)
Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcs1" to
"/lib/dev-state/vcs1"
Aug 8 23:57:06 o kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcs1" to
"/lib/dev-state/vcs1"
Aug 8 23:57:06 o kernel: PCI: Probing PCI hardware (bus 00)
Aug 8 23:55:28 o pam_console.dev[1255]: Restoring console permissions
for /dev/vcsa1
Aug 8 23:57:06 o kernel: PCI: Via IRQ fixup
Aug 8 23:55:28 o pam_console.dev[1273]: Restoring console permissions
for /dev/vcs1
Aug 8 23:57:06 o net.agent[5766]: how do I bring interfaces up on this
distro?
Aug 8 23:57:06 o kernel: ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0._PRT]
Aug 8 23:55:28 o devfsd[1032]: error calling: "unlink" in "GLOBAL"
Aug 8 23:57:06 o net.agent[5766]: add event not handled
Aug 8 23:57:06 o kernel: ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.PCI1._PRT]
Aug 8 23:55:28 o devfsd[1032]: error calling: "unlink" in "GLOBAL"
Aug 8 23:57:06 o kernel: Linux Plug and Play Support v0.97 (c) Adam
Belay
Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcsa1" to
"/lib/dev-state/vcsa1"
Aug 8 23:57:06 o kernel: pnp: PnP ACPI init
Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcsa1" to
"/lib/dev-state/vcsa1"
Aug 8 23:57:06 o kernel: pnp: PnP ACPI: found 14 devices
Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcsa1" to
"/lib/dev-state/vcsa1"
Aug 8 23:57:06 o kernel: PnPBIOS: Disabled
Aug 8 23:55:28 o pam_console.dev[1341]: Restoring console permissions
for /dev/vcsa1
Aug 8 23:57:06 o kernel: PCI: Using ACPI for IRQ routing
Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcs1" to
"/lib/dev-state/vcs1"
Aug 8 23:57:06 o sshd: uruchamianie succeeded
Aug 8 23:57:06 o kernel: ** PCI interrupts are no longer routed
automatically. If this
Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcs1" to
"/lib/dev-state/vcs1"
Aug 8 23:57:06 o kernel: ** causes a device to stop working, it is
probably because the
Aug 8 23:57:06 o sshd[5795]: Server listening on :: port 443.
Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcs1" to
"/lib/dev-state/vcs1"
Aug 8 23:57:06 o kernel: ** driver failed to call pci_enable_device().
As a temporary
Aug 8 23:57:06 o sshd[5795]: error: Bind to port 443 on 0.0.0.0 failed:
Address already in use.
Aug 8 23:55:28 o pam_console.dev[1357]: Restoring console permissions
for /dev/vcs1
Aug 8 23:57:06 o kernel: ** workaround, the "pci=routeirq" argument
restores the old
Aug 8 23:56:05 o modprobe: WARNING: Error inserting snd
(/lib/modules/2.6.11-12mdkcustom/kernel/sound/core/snd.ko): Unknow
n symbol in module, or unknown parameter (see dmesg) <29>Aug 8
23:56:05 modprobe: WARNING: Error inserting snd-seq-device (
/lib/modules/2.6.11-12mdkcustom/kernel/sound/core/seq/snd-seq-device.ko): Unknown symbol in module, or unknown parameter (see
dmesg)
Aug 8 23:57:06 o kernel: ** behavior. If this argument makes the
device work again,
Aug 8 23:56:05 o usb.agent[1795]: ... can't load module snd-usb-audio
Aug 8 23:57:06 o kernel: ** please email the output of "lspci" to
bjorn.helgaas@hp.com
Aug 8 23:56:05 o usb.agent[1795]: missing kernel or user mode driver
snd-usb-audio
Aug 8 23:57:07 o kernel: ** so I can fix the driver.
Aug 8 23:57:07 o xinetd: Uruchamianie xinetd succeeded
Aug 8 23:56:06 o usb: Inicjalizacja kontrolera USB (uhci-hcd):
succeeded
Aug 8 23:57:07 o xinetd[5813]: Reading included configuration
file: /etc/xinetd.d/cups-lpd [file=/etc/xinetd.conf] [line=1
5]
Aug 8 23:57:07 o kernel: pnp: 00:01: ioport range 0xe400-0xe47f could
not be reserved
Aug 8 23:56:06 o usb: Inicjalizacja kontrolera USB (ehci-hcd):
succeeded
Aug 8 23:57:09 o vsftpd: vsftpd vsftpd succeeded
Aug 8 23:57:09 o xinetd[5813]: Reading included configuration
file: /etc/xinetd.d/cvs [file=/etc/xinetd.d/cvs] [line=15]
Aug 8 23:57:09 o kernel: pnp: 00:01: ioport range 0xe800-0xe81f has
been reserved
Aug 8 23:56:06 o usb: Montowanie systemu plików USB succeeded
Aug 8 23:57:09 o xinetd[5813]: Reading included configuration
file: /etc/xinetd.d/imap [file=/etc/xinetd.d/imap] [line=12]
Aug 8 23:57:09 o dhcpd: Not searching LDAP since ldap-server, ldap-port
and ldap-base-dn were not specified in the config
file
Aug 8 23:57:09 o kernel: pnp: 00:0d: ioport range 0x290-0x291 has been
reserved
Aug 8 23:56:07 o modprobe: cupsd: no process killed
Aug 8 23:57:09 o xinetd[5813]: Reading included configuration
file: /etc/xinetd.d/imaps [file=/etc/xinetd.d/imaps] [line=1
4]
Aug 8 23:57:09 o dhcpd: Wrote 0 deleted host decls to leases file.
Aug 8 23:57:09 o kernel: pnp: 00:0d: ioport range 0x370-0x372 has been
reserved
Aug 8 23:56:07 o usb: Ładowanie modułu kernela dla drukarki USB
succeeded
Aug 8 23:57:10 o xinetd[5813]: Reading included configuration
file: /etc/xinetd.d/ipop2 [file=/etc/xinetd.d/ipop2] [line=1
4]
Aug 8 23:57:10 o dhcpd: Wrote 0 new dynamic host decls to leases file.
Aug 8 23:57:10 o kernel: Simple Boot Flag at 0x3a set to 0x1
Aug 8 23:56:12 o fsck: /dev/hda1: clean, 393053/3499328 files,
4493127/6986259 blocks
Aug 8 23:57:10 o xinetd[5813]: Reading included configuration
file: /etc/xinetd.d/ipop3 [file=/etc/xinetd.d/ipop3] [line=1
5]
Aug 8 23:57:10 o dhcpd: Wrote 0 leases to leases file.
Aug 8 23:57:10 o kernel: apm: BIOS version 1.2 Flags 0x03 (Driver
version 1.16ac)
Aug 8 23:56:12 o rc.sysinit: Ponowne montowanie gł. systemu plików w
trybie do odczytu i zapisu: succeeded
Aug 8 23:57:10 o xinetd[5813]: Reading included configuration
file: /etc/xinetd.d/pop3s [file=/etc/xinetd.d/pop3s] [line=1
3]
Aug 8 23:57:10 o kernel: apm: overridden by ACPI.
Aug 8 23:57:10 o dhcpd:
Aug 8 23:56:15 o rc.sysinit: Aktywacja partycji wymiany: succeeded
Aug 8 23:57:10 o xinetd[5813]: Reading included configuration
file: /etc/xinetd.d/rsync [file=/etc/xinetd.d/rsync] [line=1
3]
Aug 8 23:57:10 o kernel: audit: initializing netlink socket (disabled)
Aug 8 23:57:10 o dhcpd: No subnet declaration for eth0 (192.168.1.232).
Aug 8 23:56:16 o : Loading module: nvidia
Aug 8 23:57:10 o xinetd[5813]: Reading included configuration
file: /etc/xinetd.d/sshd-xinetd [file=/etc/xinetd.d/sshd-xin
etd] [line=13]
Aug 8 23:57:10 o kernel: audit(1123538119.408:0): initialized
Aug 8 23:57:10 o dhcpd: ** Ignoring requests on eth0. If this is not
what
Aug 8 23:56:17 o : Loading module: bttv
Aug 8 23:57:10 o xinetd[5813]: removing printer
Aug 8 23:57:10 o kernel: highmem bounce pool size: 64 pages
Aug 8 23:57:10 o dhcpd: you want, please write a subnet declaration
Aug 8 23:56:18 o : Loading module: bt878
Aug 8 23:57:10 o xinetd[5813]: removing cvspserver
Aug 8 23:57:10 o kernel: Total HugeTLB memory allocated, 0
Aug 8 23:57:10 o dhcpd: in your dhcpd.conf file for the network
segment
Aug 8 23:56:18 o : Loading module: via-agp
Aug 8 23:57:10 o xinetd[5813]: removing imap
Aug 8 23:57:10 o kernel: inotify device minor=63
Aug 8 23:57:10 o dhcpd: to which interface eth0 is attached. **
Aug 8 23:56:19 o fsck: /dev/hdb1: recovering journal
Aug 8 23:57:10 o xinetd[5813]: removing imaps
Aug 8 23:57:10 o kernel: VFS: Disk quotas dquot_6.5.1
Aug 8 23:57:10 o dhcpd:
Aug 8 23:56:21 o fsck: /dev/hdb1: clean, 124308/7340032 files,
7477522/14657296 blocks
Aug 8 23:57:11 o xinetd[5813]: removing pop2
Aug 8 23:57:11 o kernel: Dquot-cache hash table entries: 1024 (order 0,
4096 bytes)
Aug 8 23:56:22 o rc.sysinit: Montowanie lokalnych systemów plików:
succeeded
Aug 8 23:57:11 o xinetd[5813]: removing rsync
Aug 8 23:57:11 o dhcpd: Uruchamianie dhcpd succeeded
Aug 8 23:57:11 o kernel: devfs: 2004-01-31 Richard Gooch
(rgooch@atnf.csiro.au)
Aug 8 23:56:22 o rc.sysinit: Montowanie plikopartycji: succeeded
Aug 8 23:57:11 o xinetd[5813]: removing ssh
Aug 8 23:57:11 o kernel: devfs: boot_options: 0x1
Aug 8 23:56:23 o loadkeys:
Loading /usr/lib/kbd/keymaps/i386/qwerty/pl.kmap.gz
Aug 8 23:57:11 o xinetd[5813]: xinetd Version 2.3.13 started with
libwrap options compiled in.
Aug 8 23:57:11 o kernel: Supermount version 2.0.4 for kernel 2.6
Aug 8 23:57:11 o loadkeys:
Loading /usr/lib/kbd/keymaps/i386/qwerty/pl.kmap.gz
Aug 8 23:56:24 o pam_console.dev[3126]: Restoring console permissions
for /dev/dsp
Aug 8 23:57:11 o xinetd[5813]: Started working: 2 available services
Aug 8 23:57:11 o kernel: Initializing Cryptographic API
Aug 8 23:57:11 o keytable: Ładowanie mapy klawiatury: pl succeeded
Aug 8 23:56:24 o pam_console.dev[3124]: Restoring console permissions
for /dev/snd/pcmC2D1c
Aug 8 23:57:11 o kernel: isapnp: Scanning for PnP cards...
Aug 8 23:56:24 o pam_console.dev[3114]: Restoring console permissions
for /dev/dsp1
Aug 8 23:57:11 o kernel: isapnp: No Plug & Play device found
Aug 8 23:57:11 o loadkeys:
Loading /usr/lib/kbd/keymaps/include/compose.latin2.inc.gz
Aug 8 23:56:24 o pam_console.dev[3110]: Restoring console permissions
for /dev/audio2
Aug 8 23:57:11 o kernel: Real Time Clock Driver v1.12
Aug 8 23:56:24 o pam_console.dev[3100]: Restoring console permissions
for /dev/mixer2
ug 8 23:57:11 o kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Aug 8 23:56:24 o pam_console.dev[3096]: Restoring console permissions
for /dev/mixer1
Aug 8 23:57:11 o keytable: Ładowanie klawiszy kompozycji:
compose.latin2.inc succeeded
Aug 8 23:57:11 o kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Aug 8 23:56:24 o pam_console.dev[3052]: Restoring console permissions
for /dev/nvidiactl
Aug 8 23:57:11 o kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 8
ports, IRQ sharing enabled
Aug 8 23:56:24 o pam_console.dev[3037]: Restoring console permissions
for /dev/snd/pcmC2D0p
Aug 8 23:57:11 o kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Aug 8 23:56:24 o pam_console.dev[3092]: Restoring console permissions
for /dev/mixer
Aug 8 23:57:11 o kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Aug 8 23:56:24 o pam_console.dev[3027]: Restoring console permissions
for /dev/snd/pcmC2D2p
Aug 8 23:57:11 o kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Aug 8 23:56:24 o pam_console.dev[3023]: Restoring console permissions
for /dev/snd/pcmC2D3p
Aug 8 23:57:11 o kernel: io scheduler noop registered
Aug 8 23:56:24 o pam_console.dev[3076]: Restoring console permissions
for /dev/dsp2
Aug 8 23:57:11 o kernel: io scheduler anticipatory registered
Aug 8 23:57:11 o keytable: succeeded
Aug 8 23:56:24 o pam_console.dev[3072]: Restoring console permissions
for /dev/snd/controlC2
Aug 8 23:57:11 o kernel: io scheduler deadline registered
Aug 8 23:56:24 o pam_console.dev[3015]: Restoring console permissions
for /dev/snd/pcmC1D0c
Aug 8 23:57:11 o kernel: io scheduler cfq registered
Aug 8 23:56:24 o pam_console.dev[3011]: Restoring console permissions
for /dev/snd/controlC0
Aug 8 23:57:11 o kernel: RAMDISK driver initialized: 16 RAM disks of
32000K size 1024 blocksize
Aug 8 23:56:24 o pam_console.dev[3068]: Restoring console permissions
for /dev/snd/pcmC2D0c
Aug 8 23:57:11 o kernel: pktcdvd: v0.2.0a 2004-07-14 Jens Axboe
(axboe@suse.de) and petero2@telia.com
Aug 8 23:56:24 o pam_console.dev[3064]: Restoring console permissions
for /dev/snd/midiC2D0
Aug 8 23:57:11 o kernel: Uniform Multi-Platform E-IDE driver Revision:
7.00alpha2
Aug 8 23:56:24 o pam_console.dev[3007]: Restoring console permissions
for /dev/snd/pcmC0D0c
Aug 8 23:57:12 o dhclient: DHCPDISCOVER on eth2 to 255.255.255.255 port
67 interval 7
Aug 8 23:57:12 o kernel: ide: Assuming 33MHz system bus speed for PIO
modes; override with idebus=xx
Aug 8 23:56:24 o pam_console.dev[3031]: Restoring console permissions
for /dev/snd/pcmC2D2c
Aug 8 23:57:12 o kernel: VP_IDE: IDE controller at PCI slot
0000:00:11.1
Aug 8 23:56:24 o pam_console.dev[3019]: Restoring console permissions
for /dev/snd/controlC1
Aug 8 23:57:12 o kernel: ACPI: PCI interrupt 0000:00:11.1[A]: no GSI -
using IRQ 0
Aug 8 23:56:24 o pam_console.dev[3001]: Restoring console permissions
for /dev/nvidia0
Aug 8 23:57:12 o kernel: VP_IDE: chipset revision 6
Aug 8 23:56:24 o pam_console.dev[3057]: Restoring console permissions
for /dev/snd/timer
Aug 8 23:57:12 o kernel: VP_IDE: not 100%% native mode: will probe irqs
later
ug 8 23:56:24 o pam_console.dev[3049]: Restoring console permissions
for /dev/agpgart
Aug 8 23:57:12 o kernel: VP_IDE: VIA vt8233a (rev 00) IDE UDMA133
controller on pci0000:00:11.1
Aug 8 23:56:24 o pam_console.dev[3118]: Restoring console permissions
for /dev/audio1
Aug 8 23:57:12 o kernel: ide0: BM-DMA at 0xa800-0xa807, BIOS
settings: hda:DMA, hdb:DMA
Aug 8 23:56:24 o pam_console.dev[3106]: Restoring console permissions
for /dev/audio
Aug 8 23:57:12 o kernel: ide1: BM-DMA at 0xa808-0xa80f, BIOS
settings: hdc:DMA, hdd:pio
Aug 8 23:56:24 o pam_console.dev[3088]: Restoring console permissions
for /dev/midi2
Aug 8 23:57:12 o kernel: Probing IDE interface ide0...
Aug 8 23:56:24 o pam_console.dev[3084]: Restoring console permissions
for /dev/dmmidi2
Aug 8 23:57:12 o kernel: hda: Maxtor 33073U4, ATA DISK drive
Aug 8 23:56:24 o pam_console.dev[3080]: Restoring console permissions
for /dev/adsp2
Aug 8 23:57:12 o kernel: hdb: MAXTOR 6L060J3, ATA DISK drive
Aug 8 23:56:24 o pam_console.dev[3060]: Restoring console permissions
for /dev/snd/hwC2D0
Aug 8 23:57:12 o kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Aug 8 23:56:24 o keytable: Ładowanie mapy klawiatury: pl succeeded
Aug 8 23:57:12 o kernel: Probing IDE interface ide1...
Aug 8 23:57:12 o oidentd: Uruchamianie oidentd succeeded
Aug 8 23:56:25 o loadkeys:
Loading /usr/lib/kbd/keymaps/include/compose.latin2.inc.gz
Aug 8 23:57:12 o kernel: hdc: CD-RW BCE4816IM, ATAPI CD/DVD-ROM drive
Aug 8 23:56:25 o keytable: Ładowanie klawiszy kompozycji:
compose.latin2.inc succeeded
Aug 8 23:57:12 o kernel: ide1 at 0x170-0x177,0x376 on irq 15
Aug 8 23:56:26 o keytable: succeeded
Aug 8 23:57:12 o kernel: hda: max request size: 128KiB
Aug 8 23:56:28 o rc.sysinit: Uaktywnianie przestrzeni wymiany:
succeeded
Aug 8 23:57:12 o kernel: hda: 60030432 sectors (30735 MB) w/512KiB
Cache, CHS=59554/16/63, UDMA(100)
Aug 8 23:56:29 o rc.sysinit: Inicjalizacja kontrolera firewire
(ohci1394): succeeded
Aug 8 23:57:12 o kernel: hda: cache flushes not supported
Aug 8 23:56:29 o ieee1394.agent[3794]: ... no drivers for IEEE1394
product 0x/0x/0x
Aug 8 23:57:12 o kernel: /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5
>
Aug 8 23:56:30 o ieee1394.agent[3958]: ... no drivers for IEEE1394
product 0x/0x/0x
Aug 8 23:57:13 o kernel: hdb: max request size: 128KiB
Aug 8 23:56:30 o ieee1394.agent[3972]: ... no drivers for IEEE1394
product 0x/0x/0x
Aug 8 23:57:13 o kernel: hdb: 117266688 sectors (60040 MB) w/1819KiB
Cache, CHS=65535/16/63, UDMA(133)
Aug 8 23:56:31 o mandrake_everytime: Uruchamianie netprofile: succeeded
Aug 8 23:57:13 o kernel: hdb: cache flushes supported
Aug 8 23:56:31 o init: Entering runlevel: 3
Aug 8 23:57:13 o kernel: /dev/ide/host0/bus0/target1/lun0: p1
Aug 8 23:56:34 o INIT: Loading ACPI module ac: successfull
Aug 8 23:57:13 o kernel: mice: PS/2 mouse device common for all mice
Aug 8 23:56:34 o INIT: Loading ACPI module battery: successfull
Aug 8 23:57:13 o kernel: input: AT Translated Set 2 keyboard on
isa0060/serio0
Aug 8 23:56:34 o INIT: Loading ACPI module button: successfull
Aug 8 23:57:13 o kernel: input: PS/2 Generic Mouse on isa0060/serio1
Aug 8 23:56:35 o INIT: Loading ACPI module container: successfull
Aug 8 23:57:13 o kernel: md: md driver 0.90.1 MAX_MD_DEVS=256,
MD_SB_DISKS=27
Aug 8 23:56:35 o INIT: Loading ACPI module fan: successfull
Aug 8 23:57:13 o kernel: NET: Registered protocol family 2
Aug 8 23:56:35 o INIT: Loading ACPI module processor: successfull
Aug 8 23:57:13 o kernel: IP: routing cache hash table of 16384 buckets,
128Kbytes
Aug 8 23:56:35 o INIT: Loading ACPI module tc1100-wmi: successfull
Aug 8 23:57:13 o kernel: TCP established hash table entries: 262144
(order: 9, 2097152 bytes)
Aug 8 23:56:35 o INIT: Loading ACPI module thermal: successfull
Aug 8 23:57:13 o kernel: TCP bind hash table entries: 65536 (order: 6,
262144 bytes)
Aug 8 23:56:35 o INIT: Loading ACPI module video: successfull
Aug 8 23:57:13 o kernel: TCP: Hash tables configured (established
262144 bind 65536)
Aug 8 23:56:40 o rc: Uruchamianie dkms: succeeded
Aug 8 23:57:13 o kernel: NET: Registered protocol family 1
Aug 8 23:56:46 o sensord: sensord started
Aug 8 23:57:13 o kernel: ACPI wakeup devices:
Aug 8 23:56:46 o sensord: Chip: asb100-i2c-1-2d
Aug 8 23:57:13 o kernel: PCI0 PCI1 UAR1 USB0 USB1
Aug 8 23:56:46 o sensord: Adapter: SMBus Via Pro adapter at e800
Aug 8 23:57:13 o kernel: ACPI: (supports S0 S1 S4 S5)
Aug 8 23:56:46 o sensord: Algorithm: Unavailable from sysfs
Aug 8 23:57:13 o kernel: BIOS EDD facility v0.16 2004-Jun-25, 2 devices
found
Aug 8 23:56:46 o lm_sensors: Uruchamianie sensord succeeded
Aug 8 23:57:13 o kernel: devfs_mk_dev: could not append to parent for
md/0
Aug 8 23:56:46 o sensord: VCore 1: +1.84 V (min = +1.71 V, max =
+1.89 V)
Aug 8 23:57:13 o kernel: md: Autodetecting RAID arrays.
Aug 8 23:56:46 o sensord: +3.3V: +3.33 V (min = +3.14 V, max = +3.47
V)
Aug 8 23:57:13 o kernel: md: autorun ...
Aug 8 23:56:46 o sensord: +5V: +5.00 V (min = +4.76 V, max = +5.24 V)
Aug 8 23:57:14 o kernel: md: ... autorun DONE.
Aug 8 23:56:46 o sensord: +12V: +12.65 V (min = +10.82 V, max =
+13.19 V)
Aug 8 23:57:14 o kernel: EXT3-fs: INFO: recovery required on readonly
filesystem.
Aug 8 23:56:46 o sensord: -12V (reserved): -13.15 V (min = -0.00 V,
max = -0.00 V)
Aug 8 23:57:14 o kernel: EXT3-fs: write access will be enabled during
recovery.
Aug 8 23:56:46 o sensord: -5V (reserved): -5.52 V (min = -0.00 V, max
= -0.00 V)
Aug 8 23:57:14 o kernel: kjournald starting. Commit interval 5 seconds
Aug 8 23:56:46 o sensord: CPU Fan: 2033 RPM (min = 664 RPM, div = -0)
Aug 8 23:57:14 o kernel: EXT3-fs: hda1: orphan cleanup on readonly fs
Aug 8 23:56:46 o sensord: Power Fan: 1288 RPM (min = 664 RPM, div =
-0)
Aug 8 23:57:14 o kernel: ext3_orphan_cleanup: deleting unreferenced
inode 3467492
Aug 8 23:56:46 o sensord: Chassic Fan: 1562 RPM (min = 664 RPM, div =
-0)
Aug 8 23:57:14 o kernel: ext3_orphan_cleanup: deleting unreferenced
inode 2142121
Aug 8 23:56:46 o sensord: M/B Temp: 44.0 C (limit = 40 C, hysteresis
= 45 C)
Aug 8 23:57:14 o kernel: EXT3-fs: hda1: 2 orphan inodes deleted
Aug 8 23:56:46 o sensord: CPU Temp (Intel): 69.5 C (limit = 50 C,
hysteresis = 60 C)
Aug 8 23:57:14 o kernel: EXT3-fs: recovery complete.
Aug 8 23:56:46 o sensord: Power Temp: 38.0 C (limit = 40 C,
hysteresis = 45 C)
Aug 8 23:57:14 o kernel: EXT3-fs: mounted filesystem with ordered data
mode.
Aug 8 23:56:46 o sensord: CPU Temp (AMD): 60.0 C (limit = 50 C,
hysteresis = 60 C)
Aug 8 23:57:14 o kernel: VFS: Mounted root (ext3 filesystem) readonly.
Aug 8 23:56:46 o sensord: Chip: LG PAL_BG-i2c-0-61
Aug 8 23:57:14 o kernel: Mounted devfs on /dev
Aug 8 23:56:46 o sensord: Adapter: bt878 #0 [sw]
Aug 8 23:57:14 o kernel: Freeing unused kernel memory: 268k freed
Aug 8 23:56:46 o sensord: Algorithm: Unavailable from sysfs
Aug 8 23:57:14 o kernel: ACPI: Power Button (FF) [PWRF]
Aug 8 23:56:48 o network: Konfiguracja parametrów sieciowych:
succeeded
Aug 8 23:57:15 o kernel: ibm_acpi: ec object not found
Aug 8 23:56:49 o postfix/postfix-script: fatal: the Postfix mail system
is not running
Aug 8 23:57:15 o postfix/postfix-script: starting the Postfix mail
system
Aug 8 23:57:15 o kernel: usbcore: registered new driver usbfs
Aug 8 23:56:49 o network: Podnoszenie interfejsu lokalnego: succeeded
Aug 8 23:57:15 o postfix: succeeded
Aug 8 23:57:15 o postfix/master[6062]: daemon started -- version 2.1.5
Aug 8 23:57:15 o kernel: usbcore: registered new driver hub
Aug 8 23:56:52 o postfix/postfix-script: fatal: the Postfix mail system
is not running
Aug 8 23:57:15 o kernel: [eagle-usb] driver V2.2.0 loaded
Aug 8 23:56:52 o network: Inicjowanie interfejsu eth0: succeeded
Aug 8 23:57:16 o kernel: usbcore: registered new driver eagle-usb
Aug 8 23:56:54 o postfix/postfix-script: fatal: the Postfix mail system
is not running
Aug 8 23:57:16 o kernel: Linux video capture interface: v1.00
Aug 8 23:56:54 o network: Inicjowanie interfejsu eth1: succeeded
Aug 8 23:57:16 o kernel: pwc Philips webcam module version
10.0.6-unofficial loaded.
Aug 8 23:56:54 o ifplugd(eth2)[5369]: ifplugd 0.26 initializing.
Aug 8 23:57:16 o kernel: pwc Supports Philips PCA645/646,
PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
Aug 8 23:56:54 o ifplugd(eth2)[5369]: Using interface
eth2/00:E0:18:00:00:04 with driver <eth1394> (version: $Rev: 1224 $)
Aug 8 23:57:16 o kernel: pwc Also supports the Askey VC010, various
Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
Aug 8 23:56:54 o ifplugd(eth2)[5369]: Using detection mode: IFF_RUNNING
Aug 8 23:57:16 o kernel: pwc the Creative WebCam 5 & Pro Ex, SOTEC
Afina Eye and Visionite VCS-UC300 and VCS-UM100.
Aug 8 23:56:54 o ifplugd(eth2)[5369]: Initialization complete, link
beat detected.
Aug 8 23:57:16 o kernel: pwc Default framerate set to 5.
Aug 8 23:56:54 o ifplugd(eth2)[5369]: Executing
'/etc/ifplugd/ifplugd.action eth2 up'.
Aug 8 23:57:16 o kernel: pwc Default image size set to vga [640x480].
Aug 8 23:56:54 o dhclient: eth2: unknown hardware address type 24
Aug 8 23:57:17 o kernel: pwc Trace options: 0x00a1
Aug 8 23:56:55 o network: Inicjowanie interfejsu eth2: succeeded
Aug 8 23:57:17 o kernel: pwc Preferred compression set to 1.
Aug 8 23:57:17 o httpd: Uruchamianie httpd succeeded
Aug 8 23:57:17 o kernel: usbcore: registered new driver Philips webcam
Aug 8 23:57:18 o rc: Uruchamianie kheader: succeeded
Aug 8 23:57:18 o kernel: USB Universal Host Controller Interface driver
v2.2
Aug 8 23:57:19 o dhclient: DHCPDISCOVER on eth2 to 255.255.255.255 port
67 interval 11
Aug 8 23:57:19 o kernel: ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 19
(level, low) -> IRQ 19
Aug 8 23:57:19 o devfsd[1032]: Caught SIGHUP
Aug 8 23:57:19 o devfsd: Uruchamianie czynności devfsd: succeeded
Aug 8 23:57:19 o kernel: uhci_hcd 0000:00:09.0: UHCI Host Controller
Aug 8 23:57:19 o devfsd[1032]: read config file:
"/etc/devfs/conf.d//mouse.conf"
Aug 8 23:57:21 o kernel: uhci_hcd 0000:00:09.0: irq 19, io base 0xd800
Aug 8 23:57:22 o devfsd[1032]: read config file:
"/etc/devfs/conf.d//dynamic.conf"
Aug 8 23:57:22 o kernel: uhci_hcd 0000:00:09.0: new USB bus registered,
assigned bus number 1
Aug 8 23:57:22 o devfsd[1032]: read config file:
"/etc/devfs/conf.d//rfcomm.conf"
Aug 8 23:57:22 o kernel: hub 1-0:1.0: USB hub found
Aug 8 23:57:22 o devfsd[1032]: read config file:
"/etc/devfs/conf.d//mk712.conf"
Aug 8 23:57:22 o kernel: hub 1-0:1.0: 2 ports detected
Aug 8 23:57:22 o devfsd[1032]: read config file: "/etc/devfsd.conf"
Aug 8 23:57:22 o kernel: ACPI: PCI interrupt 0000:00:09.1[B] -> GSI 16
(level, low) -> IRQ 16
Aug 8 23:57:22 o devfsd[6285]: error execing:
"/etc/dynamic/scripts/part.script"^INo such file or directory
Aug 8 23:57:22 o kernel: uhci_hcd 0000:00:09.1: UHCI Host Controller
Aug 8 23:57:22 o devfsd[6286]: error execing:
"/etc/dynamic/scripts/part.script"^INo such file or directory
Aug 8 23:57:22 o kernel: uhci_hcd 0000:00:09.1: irq 16, io base 0xd400
Aug 8 23:57:22 o devfsd[6287]: error execing:
"/etc/dynamic/scripts/part.script"^INo such file or directory
Aug 8 23:57:22 o kernel: uhci_hcd 0000:00:09.1: new USB bus registered,
assigned bus number 2
Aug 8 23:57:22 o devfsd[6289]: error execing:
"/etc/dynamic/scripts/part.script"^INo such file or directory
Aug 8 23:57:22 o kernel: hub 2-0:1.0: USB hub found
Aug 8 23:57:22 o kernel: hub 2-0:1.0: 2 ports detected
Aug 8 23:57:22 o kernel: ACPI: PCI interrupt 0000:00:11.2[D] -> GSI 21
(level, low) -> IRQ 21
Aug 8 23:57:22 o kernel: uhci_hcd 0000:00:11.2: UHCI Host Controller
Aug 8 23:57:22 o kernel: uhci_hcd 0000:00:11.2: irq 21, io base 0xa400
Aug 8 23:57:22 o kernel: uhci_hcd 0000:00:11.2: new USB bus registered,
assigned bus number 3
Aug 8 23:57:22 o kernel: hub 3-0:1.0: USB hub found
Aug 8 23:57:22 o kernel: hub 3-0:1.0: 2 ports detected
Aug 8 23:57:22 o kernel: ACPI: PCI interrupt 0000:00:11.3[D] -> GSI 21
(level, low) -> IRQ 21
Aug 8 23:57:22 o kernel: uhci_hcd 0000:00:11.3: UHCI Host Controller
Aug 8 23:57:22 o kernel: uhci_hcd 0000:00:11.3: irq 21, io base 0xa000
Aug 8 23:57:22 o kernel: uhci_hcd 0000:00:11.3: new USB bus registered,
assigned bus number 4
Aug 8 23:57:22 o kernel: hub 4-0:1.0: USB hub found
Aug 8 23:57:23 o kernel: hub 4-0:1.0: 2 ports detected
Aug 8 23:57:23 o kernel: usb 4-1: new full speed USB device using
uhci_hcd and address 2
Aug 8 23:57:23 o kernel: [eagle-usb] New USB ADSL device detected,
waiting for DSP code...
Aug 8 23:57:23 o kernel: [eagle-usb] Interface 0 accepted.
Aug 8 23:57:23 o kernel: [eagle-usb] created proc entry
at : /proc/driver/eagle-usb/004-002
Aug 8 23:57:23 o kernel: ACPI: PCI interrupt 0000:00:09.2[C] -> GSI 17
(level, low) -> IRQ 17
Aug 8 23:57:23 o kernel: ehci_hcd 0000:00:09.2: EHCI Host Controller
Aug 8 23:57:23 o kernel: ehci_hcd 0000:00:09.2: irq 17, pci mem
0xe9800000
Aug 8 23:57:23 o kernel: ehci_hcd 0000:00:09.2: new USB bus registered,
assigned bus number 5
Aug 8 23:57:23 o kernel: ehci_hcd 0000:00:09.2: USB 2.0 initialized,
EHCI 0.95, driver 10 Dec 2004
Aug 8 23:57:23 o kernel: hub 5-0:1.0: USB hub found
Aug 8 23:57:23 o kernel: hub 5-0:1.0: 4 ports detected
Aug 8 23:57:23 o kernel: usb 1-1: new full speed USB device using
uhci_hcd and address 2
Aug 8 23:57:23 o kernel: pwc Philips PCVC740K (ToUCam Pro)/PCVC840
(ToUCam II) USB webcam detected.
Aug 8 23:57:23 o kernel: pwc Registered as /dev/video5.
Aug 8 23:57:23 o kernel: usb 1-2: new full speed USB device using
uhci_hcd and address 3
Aug 8 23:57:23 o kernel: hub 1-2:1.0: USB hub found
Aug 8 23:57:23 o kernel: hub 1-2:1.0: 4 ports detected
Aug 8 23:57:23 o kernel: usb 1-2.3: new full speed USB device using
uhci_hcd and address 4
Aug 8 23:57:23 o kernel: pwc Philips PCVC740K (ToUCam Pro)/PCVC840
(ToUCam II) USB webcam detected.
Aug 8 23:57:23 o kernel: pwc Registered as /dev/video9.
Aug 8 23:57:23 o kernel: usb 1-2.3: 400mA over 100mA budget!
Aug 8 23:57:23 o kernel: hub 1-2:1.0: 100mA over power budget!
Aug 8 23:57:23 o kernel: usbcore: deregistering driver eagle-usb
Aug 8 23:57:23 o kernel: [eagle-usb] ADSL device removed
Aug 8 23:57:23 o kernel: [eagle-usb] driver unloaded
Aug 8 23:57:23 o kernel: snd: Unknown symbol unregister_sound_special
Aug 8 23:57:23 o kernel: snd: Unknown symbol register_sound_special
Aug 8 23:57:23 o kernel: snd: Unknown symbol sound_class
Aug 8 23:57:23 o kernel: snd-seq-device: Unknown symbol
snd_info_register
Aug 8 23:57:23 o kernel: snd-seq-device: Unknown symbol
snd_info_create_module_entry
Aug 8 23:57:23 o kernel: snd-seq-device: Unknown symbol
snd_info_free_entry
Aug 8 23:57:23 o kernel: snd-seq-device: Unknown symbol snd_seq_root
Aug 8 23:57:23 o kernel: snd-seq-device: Unknown symbol snd_iprintf
Aug 8 23:57:23 o kernel: snd-seq-device: Unknown symbol snd_device_new
Aug 8 23:57:23 o kernel: snd-seq-device: Unknown symbol
snd_info_unregister
Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol snd_info_register
Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol snd_seq_device_new
Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol
snd_info_free_entry
Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol
snd_unregister_oss_device
Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol
snd_register_oss_device
Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol
snd_ctl_register_ioctl
Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol snd_card_file_add
Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol snd_iprintf
Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol
snd_oss_info_register
Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol
snd_unregister_device
Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol snd_device_new
Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol
snd_ctl_unregister_ioctl
Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol
snd_info_create_card_entry
Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol snd_device_free
Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol
snd_card_file_remove
Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol
snd_info_unregister
Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol
snd_device_register
Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol
snd_register_device
Aug 8 23:57:23 o kernel: snd-usb-lib: Unknown symbol
snd_rawmidi_receive
Aug 8 23:57:23 o kernel: snd-usb-lib: Unknown symbol
snd_rawmidi_transmit_empty
Aug 8 23:57:23 o kernel: snd-usb-lib: Unknown symbol
snd_rawmidi_transmit
Aug 8 23:57:23 o kernel: snd-usb-lib: Unknown symbol
snd_rawmidi_transmit_ack
Aug 8 23:57:23 o kernel: snd-usb-lib: Unknown symbol
snd_rawmidi_transmit_peek
Aug 8 23:57:23 o kernel: snd-usb-lib: Unknown symbol snd_rawmidi_new
Aug 8 23:57:23 o kernel: snd-usb-lib: Unknown symbol
snd_rawmidi_set_ops
Aug 8 23:57:23 o kernel: snd-timer: Unknown symbol snd_info_register
Aug 8 23:57:23 o kernel: snd-timer: Unknown symbol
snd_info_create_module_entry
Aug 8 23:57:23 o kernel: snd-timer: Unknown symbol snd_info_free_entry
Aug 8 23:57:23 o kernel: snd-timer: Unknown symbol snd_iprintf
Aug 8 23:57:23 o kernel: snd-timer: Unknown symbol snd_ecards_limit
Aug 8 23:57:23 o kernel: snd-timer: Unknown symbol
snd_oss_info_register
Aug 8 23:57:23 o kernel: snd-timer: Unknown symbol
snd_unregister_device
Aug 8 23:57:24 o kernel: snd-timer: Unknown symbol snd_device_new
Aug 8 23:57:24 o kernel: snd-timer: Unknown symbol snd_kmalloc_strdup
Aug 8 23:57:24 o kernel: snd-timer: Unknown symbol snd_info_unregister
Aug 8 23:57:24 o kernel: snd-timer: Unknown symbol snd_register_device
Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_info_register
Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol
snd_info_create_module_entry
Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_timer_notify
Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_timer_interrupt
Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_info_free_entry
Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_info_get_str
Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_ctl_register_ioctl
Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_card_file_add
Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_iprintf
Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_major
Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_unregister_device
Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_timer_new
Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_device_new
Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol
snd_ctl_unregister_ioctl
Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol
snd_info_create_card_entry
Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_power_wait
Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_device_free
Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_card_file_remove
Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_info_unregister
Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_device_register
Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_register_device
Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_info_get_line
Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol snd_ctl_add
Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol snd_pcm_new
Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
snd_card_register
Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol snd_card_free
Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
snd_card_proc_new
Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
snd_usb_create_midi_interface
Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol snd_pcm_stop
Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
snd_pcm_hw_constraint_minmax
Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
snd_pcm_format_physical_width
Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol snd_ctl_free_one
Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol snd_ctl_find_id
Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol snd_ctl_new1
Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
snd_component_add
Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
snd_pcm_hw_rule_add
Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol snd_card_new
Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol snd_iprintf
Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
snd_pcm_lib_malloc_pages
Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
snd_pcm_lib_ioctl
Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
snd_pcm_lib_free_pages
Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
snd_pcm_new_stream
Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol snd_pcm_set_ops
Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol snd_device_new
Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
snd_card_disconnect
Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
snd_pcm_lib_preallocate_pages
Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
snd_card_free_in_thread
Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
snd_pcm_lib_preallocate_free_for_all
Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
snd_pcm_period_elapsed
Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
snd_pcm_format_name
Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
snd_usbmidi_disconnect
Aug 8 23:57:24 o kernel: usbcore: registered new driver snd-usb-audio
Aug 8 23:57:24 o kernel: usbcore: registered new driver usblp
Aug 8 23:57:24 o kernel: drivers/usb/class/usblp.c: v0.13: USB Printer
Device Class driver
Aug 8 23:57:24 o kernel: EXT3 FS on hda1, internal journal
Aug 8 23:57:24 o kernel: ACPI: PCI interrupt 0000:00:0f.0[A] -> GSI 18
(level, low) -> IRQ 18
Aug 8 23:57:24 o kernel: Adding 2064312k swap on /dev/hda5.
Priority:-1 extents:1
Aug 8 23:57:24 o kernel: Linux agpgart interface v0.100 (c) Dave Jones
Aug 8 23:57:24 o kernel: nvidia: module license 'NVIDIA' taints kernel.
Aug 8 23:57:24 o kernel: ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16
(level, low) -> IRQ 16
Aug 8 23:57:24 o kernel: NVRM: loading NVIDIA Linux x86 NVIDIA Kernel
Module 1.0-7174 Tue Mar 22 06:44:39 PST 2005
Aug 8 23:57:24 o kernel: bttv: driver version 0.9.15 loaded
Aug 8 23:57:24 o kernel: bttv: using 8 buffers with 2080k (520 pages)
each for capture
Aug 8 23:57:24 o kernel: bttv: Bt8xx card found (0).
Aug 8 23:57:24 o kernel: ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 16
(level, low) -> IRQ 16
Aug 8 23:57:24 o kernel: bttv0: Bt878 (rev 17) at 0000:00:0d.0, irq:
16, latency: 32, mmio: 0xed000000
Aug 8 23:57:24 o kernel: bttv0: using: Prolink Pixelview PV-BT878P+9B
(PlayTV Pro rev.9B FM+NICAM) [card=72,insmod option]
Aug 8 23:57:24 o kernel: bttv0: gpio: en=00000000, out=00000000
in=00ffc0ff [init]
Aug 8 23:57:24 o kernel: bttv0: using tuner=28
Aug 8 23:57:24 o kernel: bttv0: i2c: checking for TDA7432 @ 0x8a... not
found
Aug 8 23:57:24 o kernel: tvaudio: TV audio decoder + audio/video mux
driver
Aug 8 23:57:24 o kernel: tvaudio: known chips:
tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6320,tea6420,tda8425
,pic16c54 (PV951),ta8874z
Aug 8 23:57:24 o kernel: bttv0: i2c: checking for TDA9887 @ 0x86... not
found
Aug 8 23:57:25 o kernel: tuner 0-0061: chip found @ 0xc2 (bt878 #0
[sw])
Aug 8 23:57:25 o kernel: tuner 0-0061: type set to 28 (LG PAL_BG+FM
(TPI8PSB01D))
Aug 8 23:57:25 o kernel: bttv0: registered device video2
Aug 8 23:57:25 o kernel: bttv0: registered device vbi0
Aug 8 23:57:25 o kernel: bttv0: registered device radio0
Aug 8 23:57:25 o kernel: bttv0: PLL: 28636363 => 35468950 .. ok
Aug 8 23:57:25 o kernel: bttv0: add subdevice "remote0"
Aug 8 23:57:25 o kernel: bt878: AUDIO driver version 0.0.0 loaded
Aug 8 23:57:25 o kernel: bt878: Bt878 AUDIO function found (0).
Aug 8 23:57:25 o kernel: ACPI: PCI interrupt 0000:00:0d.1[A] -> GSI 16
(level, low) -> IRQ 16
Aug 8 23:57:25 o kernel: bt878(0): Bt878 (rev 17) at 00:0d.1, irq: 16,
latency: 32, memory: 0xec800000
Aug 8 23:57:25 o kernel: agpgart: Detected VIA KT266/KY266x/KT333
chipset
Aug 8 23:57:25 o kernel: agpgart: Maximum main memory to use for agp
memory: 1185M
Aug 8 23:57:25 o kernel: agpgart: AGP aperture is 128M @ 0xf0000000
Aug 8 23:57:25 o kernel: kjournald starting. Commit interval 5 seconds
Aug 8 23:57:25 o kernel: EXT3 FS on hdb1, internal journal
Aug 8 23:57:25 o kernel: EXT3-fs: mounted filesystem with ordered data
mode.
Aug 8 23:57:25 o kernel: loop: loaded (max 8 devices)
Aug 8 23:57:25 o kernel: SCSI subsystem initialized
Aug 8 23:57:25 o kernel: st: Version 20041025, fixed bufsize 32768, s/g
segs 256
Aug 8 23:57:25 o kernel: ieee1394: Initialized config rom entry
`ip1394'
Aug 8 23:57:25 o kernel: ohci1394: $Rev: 1223 $ Ben Collins
<bcollins@debian.org>
Aug 8 23:57:25 o kernel: ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 17
(level, low) -> IRQ 17
Aug 8 23:57:25 o kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI):
IRQ=[17] MMIO=[ea800000-ea8007ff] Max Packet=[2048]
Aug 8 23:57:25 o kernel: hdc: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB
Cache, UDMA(33)
Aug 8 23:57:25 o kernel: Uniform CD-ROM driver Revision: 3.20
Aug 8 23:57:26 o kernel: 8139too Fast Ethernet driver 0.9.27
Aug 8 23:57:26 o kernel: ACPI: PCI interrupt 0000:00:0e.0[A] -> GSI 17
(level, low) -> IRQ 17
Aug 8 23:57:26 o kernel: eth0: RealTek RTL8139 at 0xf8c40000,
00:e0:4c:08:ae:17, IRQ 17
Aug 8 23:57:26 o kernel: eth0: Identified 8139 chip type
'RTL-8100B/8139D'
Aug 8 23:57:26 o kernel: ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 19
(level, low) -> IRQ 19
Aug 8 23:57:26 o kernel: eth1: RealTek RTL8139 at 0xf8c42000,
00:50:fc:c7:eb:2b, IRQ 19
Aug 8 23:57:26 o kernel: eth1: Identified 8139 chip type
'RTL-8100B/8139D'
Aug 8 23:57:26 o kernel: ide-floppy driver 0.99.newide
Aug 8 23:57:26 o kernel: eth1394: $Rev: 1224 $ Ben Collins
<bcollins@debian.org>
Aug 8 23:57:26 o kernel: eth1394: eth2: IEEE-1394 IPv4 over 1394
Ethernet (fw-host0)
Aug 8 23:57:26 o kernel: ieee1394: Host added: ID:BUS[0-00:1023]
GUID[00e018000004199b]
Aug 8 23:57:26 o kernel: ip_conntrack version 2.1 (8192 buckets, 65536
max) - 248 bytes per conntrack
Aug 8 23:57:26 o kernel: ip_tables: (C) 2000-2002 Netfilter core team
Aug 8 23:57:26 o kernel: Floppy drive(s): fd0 is 1.44M
Aug 8 23:57:26 o kernel: FDC 0 is a post-1991 82077
Aug 8 23:57:26 o kernel: NET: Registered protocol family 23
Aug 8 23:57:26 o kernel: IrCOMM protocol (Dag Brattli)
Aug 8 23:57:26 o kernel: [eagle-usb] driver V2.2.0 loaded
Aug 8 23:57:26 o kernel: [eagle-usb] New USB ADSL device detected,
waiting for DSP code...
Aug 8 23:57:26 o kernel: [eagle-usb] Interface 0 accepted.
Aug 8 23:57:26 o kernel: [eagle-usb] created proc entry
at : /proc/driver/eagle-usb/004-002
Aug 8 23:57:26 o kernel: usbcore: registered new driver eagle-usb
Aug 8 23:57:26 o kernel: eth0: link down
Aug 8 23:57:26 o kernel: eth0: link down
Aug 8 23:57:26 o kernel: NET: Registered protocol family 17
Aug 8 23:57:26 o kernel: eth0: link down
Aug 8 23:57:26 o kernel: eth1: link up, 100Mbps, full-duplex, lpa
0x41E1
Aug 8 23:57:26 o kernel: CSLIP: code copyright 1989 Regents of the
University of California
Aug 8 23:57:26 o kernel: PPP generic driver version 2.4.2
Aug 8 23:57:26 o kernel: NET: Registered protocol family 10
Aug 8 23:57:26 o kernel: Disabled Privacy Extensions on device
c0416140(lo)
Aug 8 23:57:26 o kernel: IPv6 over IPv4 tunneling driver
Aug 8 23:57:26 o kernel: eth1: no IPv6 routers present
Aug 8 23:57:26 o kernel: eth0: no IPv6 routers present
Aug 8 23:57:26 o kernel: ip_tables: (C) 2000-2002 Netfilter core team
Aug 8 23:57:26 o kernel: ip_conntrack version 2.1 (8192 buckets, 65536
max) - 248 bytes per conntrack
Aug 8 23:57:27 o kernel: ip6_tables: (C) 2000-2002 Netfilter core team
Aug 8 23:57:27 o hal.hotplug[6694]: DEVPATH is not set
Aug 8 23:57:27 o kernel: input: PC Speaker
Aug 8 23:57:28 o kernel: cpu5wdt: init success
Aug 8 23:57:29 o kernel: usbcore: deregistering driver snd-usb-audio
Aug 8 23:57:30 o dhclient: DHCPDISCOVER on eth2 to 255.255.255.255 port
67 interval 12
Aug 8 23:57:31 o devfsd[1032]: error copying: "/lib/dev-state/vcc/2" to
"/dev/vcc/2"
Aug 8 23:57:31 o devfsd[1032]: error copying: "/lib/dev-state/vcc/3" to
"/dev/vcc/3"
Aug 8 23:57:31 o devfsd[1032]: error copying: "/lib/dev-state/vcc/2" to
"/dev/vcc/2"
Aug 8 23:57:31 o devfsd[1032]: error copying: "/lib/dev-state/vcc/3" to
"/dev/vcc/3"
Aug 8 23:57:34 o kernel: ACPI: PCI interrupt 0000:00:0f.0[A] -> GSI 18
(level, low) -> IRQ 18
Aug 8 23:57:34 o alsa: succeeded
Aug 8 23:57:35 o login(pam_unix)[6928]: session opened for user root by
(uid=0)
Aug 8 23:57:35 o -- root[6928]: ROOT LOGIN ON vc/1
Aug 8 23:57:39 o kernel: usbcore: registered new driver snd-usb-audio
Aug 8 23:57:40 o login(pam_unix)[6933]: session opened for user
michalkr by (uid=0)
Aug 8 23:57:41 o pam_console.dev[8235]: Restoring console permissions
for /dev/mixer2
Aug 8 23:57:42 o dhclient: DHCPDISCOVER on eth2 to 255.255.255.255 port
67 interval 15
Aug 8 23:57:46 o pam_console.dev[8441]: Restoring console permissions
for /dev/mixer
Aug 8 23:57:46 o -- michalkr[6933]: LOGIN ON vc/6 BY michalkr
Aug 8 23:57:46 o motion: Processing thread 0 - config
file /usr/local/etc/motion.conf
Aug 8 23:57:46 o motion: Unknown config option: "mpeg_encode"
Aug 8 23:57:46 o motion: Unknown config option: "mpeg_encode_bin"
Aug 8 23:57:46 o motion: Unknown config option: "adjust_rate"
Aug 8 23:57:46 o motion: Unknown config option: "jpg_cleanup"
Aug 8 23:57:46 o motion: Unknown config option:
"berkeley_single_directory"
Aug 8 23:57:46 o motion: Unknown config option: "predict_filename"
Aug 8 23:57:46 o motion: Unknown config option: "sql_log_image"
Aug 8 23:57:46 o motion: Unknown config option: "sql_log_snapshot"
Aug 8 23:57:46 o motion: Unknown config option: "sql_log_mpeg"
Aug 8 23:57:46 o motion: Unknown config option: "sql_log_timelapse"
Aug 8 23:57:46 o motion: Unknown config option: "sql_log_prediction"
Aug 8 23:57:46 o motion: Unknown config option: "pgsql_port"
Aug 8 23:57:46 o motion: Unknown config option: "predict_enable"
Aug 8 23:57:47 o motion: Unknown config option: "predict_threshold"
Aug 8 23:57:47 o motion: motion running as daemon process
Aug 8 23:57:47 o motion: waiting for threads to finish, pid: 8508
Aug 8 23:57:47 o motion: Thread 0 PID: 8508
Aug 8 23:57:47 o kernel: pwc Failed to set LED on/off time.
Aug 8 23:57:47 o kernel: pwc set_video_mode(640x480 @ 5, palette 15).
Aug 8 23:57:47 o kernel: pwc decode_size = 5.
Aug 8 23:57:47 o kernel: pwc Using alternate setting 6.
Aug 8 23:57:47 o kernel: [eagle-usb] ioctl EU_IO_CMVS received and
treated.
Aug 8 23:57:47 o kernel: [eagle-usb] ioctl EU_IO_OPTIONS received
Aug 8 23:57:47 o kernel: [eagle-usb] ioctl EU_IO_DSP received
Aug 8 23:57:47 o kernel: [eagle-usb] Loading DSP code to device...
Aug 8 23:57:47 o kernel: [eagle-usb] DSP code successfully loaded to
device
Aug 8 23:57:48 o pam_console.dev[8541]: Restoring console permissions
for /dev/vcs10
Aug 8 23:57:48 o pam_console.dev[8547]: Restoring console permissions
for /dev/vcsa10
Aug 8 23:57:50 o kernel: pwc Dumping frame 6.
Aug 8 23:57:50 o kernel: agpgart: Found an AGP 2.0 compliant device at
0000:00:00.0.
Aug 8 23:57:50 o kernel: agpgart: Putting AGP V2 device at 0000:00:00.0
into 4x mode
Aug 8 23:57:50 o kernel: agpgart: Putting AGP V2 device at 0000:01:00.0
into 4x mode
Aug 8 23:57:50 o kernel: pwc Dumping frame 7.
Aug 8 23:57:50 o kernel: pwc Dumping frame 9.
Aug 8 23:57:50 o kernel: agpgart: Found an AGP 2.0 compliant device at
0000:00:00.0.
Aug 8 23:57:50 o kernel: agpgart: Putting AGP V2 device at 0000:00:00.0
into 4x mode
Aug 8 23:57:50 o kernel: agpgart: Putting AGP V2 device at 0000:01:00.0
into 4x mode
Aug 8 23:57:51 o kernel: pwc Dumping frame 11.
Aug 8 23:57:51 o kernel: pwc Dumping frame 13.
Aug 8 23:57:52 o kernel: pwc Dumping frame 16.
Aug 8 23:57:52 o kernel: pwc Dumping frame 18.
Aug 8 23:57:53 o kernel: pwc Dumping frame 21.
Aug 8 23:57:53 o kernel: pwc Dumping frame 23.
Aug 8 23:57:54 o kernel: pwc Dumping frame 26.
Aug 8 23:57:54 o kernel: pwc Dumping frame 28.
Aug 8 23:57:54 o kernel: pwc Dumping frame 30.
Aug 8 23:57:55 o kernel: pwc Dumping frame 33.
Aug 8 23:57:55 o kernel: pwc Dumping frame 35.
Aug 8 23:57:56 o kernel: pwc Dumping frame 38.
Aug 8 23:57:56 o kernel: pwc Dumping frame 40.
Aug 8 23:57:57 o dhclient: DHCPDISCOVER on eth2 to 255.255.255.255 port
67 interval 2
Aug 8 23:57:57 o kernel: pwc Dumping frame 42.
Aug 8 23:57:57 o kernel: pwc Dumping frame 43.
Aug 8 23:57:57 o kernel: pwc Dumping frame 44.
Aug 8 23:57:58 o kernel: pwc Dumping frame 46 (last message).
Aug 8 23:57:59 o dhclient: No DHCPOFFERS received.
Aug 8 23:58:00 o kernel: zcip uses obsolete (PF_INET,SOCK_PACKET)
Aug 8 23:58:00 o zcip[8577]: libnet_open_link_interface("eth2"):
unknown physical layer type 0x18
Aug 8 23:58:00 o ifplugd(eth2)[5369]: client: Determining IP
information for eth2... failed.
Aug 8 23:58:00 o ifplugd(eth2)[5369]: Program execution failed, return
value is 1.
Aug 8 23:58:00 o ifplugd(eth2)[5369]: Exiting.
Aug 8 23:58:04 o kernel: [eagle-usb] Modem operational !!
Aug 8 23:58:04 o kernel: [eagle-usb] Ethernet device eth3 created.
Aug 8 23:58:06 o postfix/postfix-script: refreshing the Postfix mail
system
Aug 8 23:58:06 o postfix/master[6062]: reload configuration
Aug 8 23:58:14 o kernel: eth3: no IPv6 routers present
Aug 8 23:58:22 o pppd[8679]: pppd 2.4.3 started by root, uid 0
Aug 8 23:58:22 o pppd[8679]: using channel 1
Aug 8 23:58:22 o pppd[8679]: Using interface ppp0
Aug 8 23:58:22 o pppd[8679]: Connect: ppp0 <--> /dev/pts/0
Aug 8 23:58:23 o pppd[8679]: sent [LCP ConfReq id=0x1 <mru 1492> <magic
0xbd1ae510>]
Aug 8 23:58:25 o pppd[8679]: rcvd [LCP ConfReq id=0x3e <auth chap MD5>
<magic 0x6d4ee261>]
Aug 8 23:58:25 o pppd[8679]: sent [LCP ConfAck id=0x3e <auth chap MD5>
<magic 0x6d4ee261>]
Aug 8 23:58:26 o pppd[8679]: sent [LCP ConfReq id=0x1 <mru 1492> <magic
0xbd1ae510>]
Aug 8 23:58:26 o pppd[8679]: rcvd [LCP ConfAck id=0x1 <mru 1492> <magic
0xbd1ae510>]
Aug 8 23:58:26 o pppd[8679]: rcvd [CHAP Challenge id=0x8d
<74092edeac109ef714f8f867905772a515274f12be>, name = "kat_ru1"]
Aug 8 23:58:26 o pppd[8679]: sent [CHAP Response id=0x8d
<0a44b75013fc6d851d1f081a27942425>, name = "CENZO@RED"
]
Aug 8 23:58:27 o pppd[8679]: rcvd [CHAP Success id=0x8d ""]
Aug 8 23:58:27 o pppd[8679]: CHAP authentication succeeded
Aug 8 23:58:27 o pppd[8679]: sent [IPCP ConfReq id=0x1 <addr 0.0.0.0>
<ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
Aug 8 23:58:27 o pppd[8679]: rcvd [IPCP ConfNak id=0x1 <addr
83.30.51.80> <ms-dns1 194.204.152.34> <ms-dns3 217.98.63.164>
]
Aug 8 23:58:27 o pppd[8679]: sent [IPCP ConfReq id=0x2 <addr
83.30.51.80> <ms-dns1 194.204.152.34> <ms-dns3 217.98.63.164>
]
Aug 8 23:58:27 o pppd[8679]: rcvd [IPCP ConfReq id=0x2 <addr
213.25.2.205>]
Aug 8 23:58:27 o pppd[8679]: sent [IPCP ConfAck id=0x2 <addr
213.25.2.205>]
Aug 8 23:58:27 o pppd[8679]: rcvd [IPCP ConfAck id=0x2 <addr
83.30.51.80> <ms-dns1 194.204.152.34> <ms-dns3 217.98.63.164>
]
Aug 8 23:58:27 o pppd[8679]: local IP address 83.30.51.80
Aug 8 23:58:27 o pppd[8679]: remote IP address 213.25.2.205
Aug 8 23:58:27 o pppd[8679]: primary DNS address 194.204.152.34
Aug 8 23:58:27 o pppd[8679]: secondary DNS address 217.98.63.164
Aug 8 23:58:27 o pppd[8747]: Script /etc/ppp/ip-up started (pid 8749)
Aug 8 23:58:27 o postfix/postfix-script: refreshing the Postfix mail
system
Aug 8 23:58:28 o postfix/master[6062]: reload configuration
Aug 8 23:58:28 o crond[8796]: (CRON) STARTUP (fork ok)
Aug 8 23:58:28 o crond: Uruchamianie crond succeeded
Aug 8 23:58:28 o postfix/postfix-script: refreshing the Postfix mail
system
Aug 8 23:58:28 o postfix/master[6062]: reload configuration
Aug 8 23:58:28 o pppd[8747]: Script /etc/ppp/ip-up finished (pid 8749),
status = 0x0
Aug 8 23:58:39 o kernel: tuner 0-0061: radio freq (0.00) out of range
(65-108)
Aug 8 23:59:00 o CROND[9091]:.................... that's all i think
It is a kernel-source-2.6-2.6.11-12mdk.i586.rpm compiled by myself
for "athlon/duron/k7" and NVIDIA-Linux-x86-1.0-7174-pkg1 compiled too
by myself.
Linux o 2.6.11-12mdkcustom #2 Sat Aug 6 11:02:20 CEST 2005 i686 AMD
Duron(TM)unknown GNU/Linux
Ps. i should compile 2.6.13-rc6, but ATM i have no time, so, i did quick
fix
#> rmmod bt878
#> rmmod bttv
#> rmmod btcx-risc
and i'm waiting for crash.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: my kernel sometimes did a crash, but no panic
2005-08-09 16:04 Klasyk
2005-08-09 19:18 ` Mauro Carvalho Chehab
@ 2005-08-09 20:21 ` Adrian Bunk
1 sibling, 0 replies; 7+ messages in thread
From: Adrian Bunk @ 2005-08-09 20:21 UTC (permalink / raw)
To: Klasyk; +Cc: linux-kernel
On Tue, Aug 09, 2005 at 06:04:05PM +0200, Klasyk wrote:
> my kernel sometimes did a crash, but no panic
> Keyboard hunged up :(
> Network were working and I can log in. Without the keybord - it
> generally worked.
>
> In logs:
> for example:
>...
> Aug 6 15:30:02 o kernel: Modules linked in: ip_nat_irc
>...
> btcx-risc tveeprom i2c-core nvidia agpgart usblp ehci-hcd uhci-hcd
>...
> Aug 6 15:30:02 o kernel: EIP: 0060:[<c026b0d9>] Tainted: P
>...
> it is not apic problem, i disabled it, and it didn't help
> Linux o 2.6.11-12mdkcustom #2 Sat Aug 6 11:02:20 CEST 2005 i686 AMD
> Duron(TM) unknown GNU/Linux
>...
Does this problem still occur with:
- a vanilla 2.6.13-rc6 ftp.kernel.org kernel and
- without loading any external modules since booting?
If it doesn't it's completely off-topic here and you should ask either
Mandrake or Nvidia for support.
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: my kernel sometimes did a crash, but no panic
[not found] ` <1123618340.2484.9.camel@KKK>
@ 2005-08-09 20:26 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 7+ messages in thread
From: Mauro Carvalho Chehab @ 2005-08-09 20:26 UTC (permalink / raw)
To: LKML, klasyk99@poczta.onet.pl
Klasyk,
It might be related to bttv, but not just listening radio. There are
some bugs on some VIA and SIS chipsets related to PCI to PCI (or PCI to
AGP) data transfers. bttv, on video overlay mode, does this.
Since you were not using BTTV for video on that time, it doesn't seen
to be your case.
It may also be related with some other PCI-PCI transfer, like some from
firewire to video or from webcam to video.
Mauro.
Em Ter, 2005-08-09 às 22:12 +0200, klasyk99@poczta.onet.pl escreveu:
> Dnia 09-08-2005, wto o godzinie 16:18 -0300, Mauro Carvalho Chehab
> napisał(a):
> > Klasyk,
> >
> > Were you using bttv at the time you had this oops? It doesn't look to
> > be related.
>
> my modprobe.conf:
>
> alias char-major-89 i2c-dev
> snd-cmipci && { /sbin/modprobe snd-pcm-oss; /bin/true; }
> alias ieee1394-controller ohci1394
> alias eth1 8139too
> alias eth0 8139too
> options bttv card=72 pll=1 tuner=28 radio=1 video_nr=2
> options lirc_gpio gpio_mask=0x1f00 gpio_lock_mask=0x8000 gpio_xor_mask=0
> soft_gap=500 sample_rate=12
>
> options pwc dev_hint=740:5,740:9 power_save=0 compression=1 size=vga
> fps=5
> alias net-pf-10 ipv6
> alias /dev/nvidia* nvidia
> alias eth2 eth1394
> options snd device_mode=0666
> alias snd-card-0 snd-emu10k1
> alias sound-slot-0 snd-emu10k1
> install usb-interface /sbin/modprobe uhci-hcd; /sbin/modprobe
> ehci-hcd; /bin/true
>
> I don't use tv on bttv, only radio.
> I'm not sure, but maybe the crash was, when i disable
> the /usr/bin/radio. But not sure. Maybe the "q" key in radio
> was the last one what i did.
>
>
>
> > Maybe you can also send us some logs about your system init
> > and some description about your configuration. What's your Motherboard?
> > What PCI chipset does it use?
>
> It is asus a7v333 on via 333. Duron 1300 without overcloking.
> 2x philips webcam pcvc740k, dsl eagle usb, bttv with radio,
> sb live, 2xeth, 1xeth1394
>
>
> lspci -vvv
> 00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo
> KT266/A/333]
> Subsystem: ASUSTeK Computer Inc. A7V333 Mainboard
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort+ >SERR- <PERR-
> Latency: 0
> Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
> Capabilities: [a0] AGP version 2.0
> Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
> HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
> Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW-
> Rate=x4
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo
> KT266/A/333 AGP] (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort+ >SERR- <PERR+
> Latency: 0
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> I/O behind bridge: 0000e000-0000dfff
> Memory behind bridge: eb000000-ec6fffff
> Prefetchable memory behind bridge: edf00000-efffffff
> BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A
> IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
> Subsystem: ASUSTeK Computer Inc.: Unknown device 808d
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 35 (500ns min, 1000ns max), cache line size 08
> Interrupt: pin A routed to IRQ 17
> Region 0: Memory at ea800000 (32-bit, non-prefetchable)
> [size=2K]
> Region 1: Memory at ea000000 (32-bit, non-prefetchable)
> [size=16K]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1
> +,D2+,D3hot+,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME+
>
> 00:09.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 50) (prog-if 00 [UHCI])
> Subsystem: ASUSTeK Computer Inc.: Unknown device 8080
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32, cache line size 08
> Interrupt: pin A routed to IRQ 19
> Region 4: I/O ports at d800 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0
> +,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:09.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 50) (prog-if 00 [UHCI])
> Subsystem: ASUSTeK Computer Inc.: Unknown device 8080
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32, cache line size 08
> Interrupt: pin B routed to IRQ 16
> Region 4: I/O ports at d400 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0
> +,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:09.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) (prog-if
> 20 [EHCI])
> Subsystem: ASUSTeK Computer Inc.: Unknown device 8080
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32, cache line size 10
> Interrupt: pin C routed to IRQ 17
> Region 0: Memory at e9800000 (32-bit, non-prefetchable)
> [size=256]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0
> +,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:0d.0 Multimedia video controller: Brooktree Corporation Bt878 Video
> Capture (rev 11)
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32 (4000ns min, 10000ns max)
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at ed000000 (32-bit, prefetchable) [size=4K]
> Capabilities: [44] Vital Product Data
> Capabilities: [4c] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:0d.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture
> (rev 11)
> Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at ec800000 (32-bit, prefetchable) [size=4K]
> Capabilities: [44] Vital Product Data
> Capabilities: [4c] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL-8139/8139C/8139C+ (rev 10)
> Subsystem: Realtek Semiconductor Co., Ltd. RT8139
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32 (8000ns min, 16000ns max)
> Interrupt: pin A routed to IRQ 17
> Region 0: I/O ports at d000 [size=256]
> Region 1: Memory at e9000000 (32-bit, non-prefetchable)
> [size=256]
> Expansion ROM at <unassigned> [disabled] [size=64K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1
> +,D2+,D3hot+,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:0f.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev
> 04)
> Subsystem: Creative Labs CT4850 SBLive! Value
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32 (500ns min, 5000ns max)
> Interrupt: pin A routed to IRQ 18
> Region 0: I/O ports at b800 [size=32]
> Capabilities: [dc] Power Management version 1
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:0f.1 Input device controller: Creative Labs SB Live! MIDI/Game Port
> (rev 01)
> Subsystem: Creative Labs Gameport Joystick
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32
> Region 0: I/O ports at b400 [size=8]
> Capabilities: [dc] Power Management version 1
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:10.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL-8139/8139C/8139C+ (rev 10)
> Subsystem: Realtek Semiconductor Co., Ltd. RT8139
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32 (8000ns min, 16000ns max)
> Interrupt: pin A routed to IRQ 19
> Region 0: I/O ports at b000 [size=256]
> Region 1: Memory at e8800000 (32-bit, non-prefetchable)
> [size=256]
> Expansion ROM at <unassigned> [disabled] [size=64K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1
> +,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:11.0 ISA bridge: VIA Technologies, Inc. VT8233A ISA Bridge
> Subsystem: ASUSTeK Computer Inc.: Unknown device 808c
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping+ SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:11.1 IDE interface: VIA Technologies, Inc.
> VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
> (prog-if 8a [Master SecP PriP])
> Subsystem: ASUSTeK Computer Inc. A7V8X motherboard
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32
> Interrupt: pin A routed to IRQ 0
> Region 4: I/O ports at a800 [size=16]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 23) (prog-if 00 [UHCI])
> Subsystem: ASUSTeK Computer Inc. VT6202 USB2.0 4 port controller
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32, cache line size 08
> Interrupt: pin D routed to IRQ 21
> Region 4: I/O ports at a400 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 23) (prog-if 00 [UHCI])
> Subsystem: ASUSTeK Computer Inc. VT6202 USB2.0 4 port controller
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32, cache line size 08
> Interrupt: pin D routed to IRQ 21
> Region 4: I/O ports at a000 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 01:00.0 VGA compatible controller: nVidia Corporation NV5 [RIVA
> TNT2/TNT2 Pro] (rev 15) (prog-if 00 [VGA])
> Subsystem: nVidia Corporation RIVA TNT2 Pro
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 248 (1250ns min, 250ns max)
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at eb000000 (32-bit, non-prefetchable)
> [size=16M]
> Region 1: Memory at ee000000 (32-bit, prefetchable) [size=32M]
> Expansion ROM at edff0000 [disabled] [size=64K]
> Capabilities: [60] Power Management version 1
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [44] AGP version 2.0
> Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
> HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
> Command: RQ=32 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit-
> FW- Rate=x4
>
>
>
>
>
>
> Log when the system started:
> (I mixed a little in scripts with the usb drivers when linux is loading)
>
> Aug 8 23:56:55 o syslogd 1.4.1: restart.
> Aug 8 23:56:56 o dhclient: eth2: unknown hardware address type 24
> Aug 8 23:56:56 o kernel: klogd 1.4.1, log source = /proc/kmsg started.
> Aug 8 23:56:56 o kernel: Inspecting /boot/System.map
> Aug 8 23:56:56 o kernel: Loaded 20310 symbols from /boot/System.map.
> Aug 8 23:56:56 o kernel: Symbols match kernel version 2.6.11.
> Aug 8 23:56:56 o kernel: No module symbols loaded - kernel modules not
> enabled.
> Aug 8 23:56:56 o kernel: Linux version 2.6.11-12mdkcustom (root@o) (gcc
> version 3.4.3 (Mandrakelinux 10.2 3.4.3-7mdk)) #
> 2 Sat Aug 6 11:02:20 CEST 2005
> Aug 8 23:56:56 o kernel: BIOS-provided physical RAM map:
> Aug 8 23:56:56 o kernel: BIOS-e820: 0000000000000000 -
> 000000000009fc00 (usable)
> Aug 8 23:56:56 o kernel: BIOS-e820: 000000000009fc00 -
> 00000000000a0000 (reserved)
> Aug 8 23:56:56 o kernel: BIOS-e820: 00000000000f0000 -
> 0000000000100000 (reserved)
> Aug 8 23:56:56 o kernel: BIOS-e820: 0000000000100000 -
> 000000004fffc000 (usable)
> Aug 8 23:56:56 o kernel: BIOS-e820: 000000004fffc000 -
> 000000004ffff000 (ACPI data)
> Aug 8 23:56:56 o kernel: BIOS-e820: 000000004ffff000 -
> 0000000050000000 (ACPI NVS)
> Aug 8 23:56:56 o partmon: Sprawdzanie czy na partycjach jest
> wystarczająca ilość miejsca:
> Aug 8 23:56:56 o kernel: BIOS-e820: 00000000fec00000 -
> 00000000fec01000 (reserved)
> Aug 8 23:56:56 o kernel: BIOS-e820: 00000000fee00000 -
> 00000000fee01000 (reserved)
> Aug 8 23:56:56 o kernel: BIOS-e820: 00000000ffff0000 -
> 0000000100000000 (reserved)
> Aug 8 23:56:56 o kernel: 383MB HIGHMEM available.
> Aug 8 23:56:57 o kernel: 896MB LOWMEM available.
> Aug 8 23:56:57 o kernel: On node 0 totalpages: 327676
> Aug 8 23:56:57 o kernel: DMA zone: 4096 pages, LIFO batch:1
> Aug 8 23:56:57 o kernel: Normal zone: 225280 pages, LIFO batch:16
> Aug 8 23:56:57 o kernel: HighMem zone: 98300 pages, LIFO batch:16
> Aug 8 23:56:57 o kernel: DMI 2.3 present.
> Aug 8 23:56:57 o kernel: ACPI: RSDP (v000
> ASUS ) @ 0x000f5c30
> Aug 8 23:56:57 o kernel: ACPI: RSDT (v001 ASUS A7V333 0x42302e31
> MSFT 0x31313031) @ 0x4fffc000
> Aug 8 23:56:57 o partmon: ^[[65G
> Aug 8 23:56:57 o kernel: ACPI: FADT (v001 ASUS A7V333 0x42302e31
> MSFT 0x31313031) @ 0x4fffc0b2
> Aug 8 23:56:57 o partmon:
> Aug 8 23:56:57 o kernel: ACPI: BOOT (v001 ASUS A7V333 0x42302e31
> MSFT 0x31313031) @ 0x4fffc030
> Aug 8 23:56:57 o rc: Uruchamianie partmon: succeeded
> Aug 8 23:56:57 o kernel: ACPI: MADT (v001 ASUS A7V333 0x42302e31
> MSFT 0x31313031) @ 0x4fffc058
> Aug 8 23:56:57 o kernel: ACPI: DSDT (v001 ASUS A7V333 0x00001000
> MSFT 0x0100000b) @ 0x00000000
> Aug 8 23:56:57 o kernel: ACPI: PM-Timer IO Port: 0xe408
> Aug 8 23:56:57 o kernel: ACPI: Local APIC address 0xfee00000
> Aug 8 23:56:58 o dhclient: DHCPDISCOVER on eth2 to 255.255.255.255 port
> 67 interval 6
> Aug 8 23:56:58 o kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00]
> enabled)
> Aug 8 23:56:58 o xfs: Uruchamianie xfs succeeded
> Aug 8 23:55:25 o rc.sysinit: Setting default font (lat2-sun16):
> succeeded
> Aug 8 23:56:58 o xfs[5533]: ignoring font path
> element /usr/X11R6/lib/X11/fonts/drakfont/Type1 (unreadable)
> Aug 8 23:56:58 o kernel: Processor #0 6:7 APIC version 16
> Aug 8 23:55:25 o rc.sysinit: Montowanie systemu plików proc succeeded
> Aug 8 23:56:58 o xfs[5533]: ignoring font path
> element /usr/X11R6/lib/X11/fonts/drakfont/ttf (unreadable)
> Aug 8 23:56:58 o kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge
> lint[0x1])
> Aug 8 23:55:25 o rc.sysinit: Montowanie sysfs na /sys succeeded
> Aug 8 23:56:58 o numlock: Uruchamianie klawiatury numerycznej:
> Aug 8 23:56:58 o xfs[5533]: ignoring font path
> element /usr/X11R6/lib/X11/fonts/100dpi:unscaled (unreadable)
> Aug 8 23:56:58 o kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000]
> gsi_base[0])
> Aug 8 23:55:25 o devfsd: Started device management daemon v1.3.25
> for /dev
> Aug 8 23:56:58 o numlock:
> Aug 8 23:56:59 o kernel: IOAPIC[0]: apic_id 2, version 2, address
> 0xfec00000, GSI 0-23
> Aug 8 23:55:26 o devfsd: error
> execing: /etc/dynamic/scripts/part.script^INo such file or directory
> Aug 8 23:56:59 o kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq
> 2 dfl edge)
> Aug 8 23:56:59 o rc: Uruchamianie numlock: succeeded
> Aug 8 23:55:26 o devfsd: error
> execing: /etc/dynamic/scripts/part.script^INo such file or directory
> Aug 8 23:56:59 o kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq
> 9 low level)
> Aug 8 23:55:26 o devfsd: error
> execing: /etc/dynamic/scripts/part.script^INo such file or directory
> Aug 8 23:56:59 o kernel: ACPI: IRQ0 used by override.
> Aug 8 23:55:26 o devfsd: error
> execing: /etc/dynamic/scripts/part.script^INo such file or directory
> Aug 8 23:57:00 o kernel: ACPI: IRQ2 used by override.
> Aug 8 23:55:28 o rc.sysinit: Uruchamianie demona DevFs succeeded
> Aug 8 23:57:00 o kernel: ACPI: IRQ9 used by override.
> Aug 8 23:55:28 o rc.sysinit: Konfiguracja parametrów jądra: succeeded
> Aug 8 23:57:00 o kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
> Aug 8 23:55:28 o pam_console.dev[1046]: Restoring console permissions
> for /dev/vcs1
> Aug 8 23:57:00 o kernel: Using ACPI (MADT) for SMP configuration
> information
> Aug 8 23:55:28 o pam_console.dev[1047]: Restoring console permissions
> for /dev/vcsa1
> Aug 8 23:57:00 o su(pam_unix)[5660]: session opened for user nobody by
> (uid=0)
> Aug 8 23:57:00 o kernel: Allocating PCI resources starting at 50000000
> (gap: 50000000:aec00000)
> Aug 8 23:55:28 o devfsd[1032]: error calling: "unlink" in "GLOBAL"
> Aug 8 23:57:00 o kernel: Built 1 zonelists
> Aug 8 23:55:28 o devfsd[1032]: error calling: "unlink" in "GLOBAL"
> Aug 8 23:57:00 o kernel: mapped APIC to ffffd000 (fee00000)
> Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcsa1" to
> "/lib/dev-state/vcsa1"
> Aug 8 23:57:00 o kernel: mapped IOAPIC to ffffc000 (fec00000)
> Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcsa1" to
> "/lib/dev-state/vcsa1"
> Aug 8 23:57:01 o kernel: Initializing CPU#0
> Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcsa1" to
> "/lib/dev-state/vcsa1"
> Aug 8 23:57:01 o kernel: Kernel command line:
> BOOT_IMAGE=MOJ_2_6_11____12 ro root=301 resume=/dev/hda5 devfs=mount
> Aug 8 23:55:28 o pam_console.dev[1090]: Restoring console permissions
> for /dev/vcsa1
> Aug 8 23:57:01 o su(pam_unix)[5660]: session closed for user nobody
> Aug 8 23:57:01 o kernel: PID hash table entries: 4096 (order: 12, 65536
> bytes)
> Aug 8 23:55:29 o devfsd[1032]: error copying: "/dev/vcs1" to
> "/lib/dev-state/vcs1"
> Aug 8 23:57:01 o mDNSResponder: Uruchamianie succeeded
> Aug 8 23:57:01 o kernel: Detected 1303.663 MHz processor.
> Aug 8 23:55:29 o devfsd[1032]: error copying: "/dev/vcs1" to
> "/lib/dev-state/vcs1"
> Aug 8 23:57:01 o kernel: Using pmtmr for high-res timesource
> Aug 8 23:55:29 o devfsd[1032]: error copying: "/dev/vcs1" to
> "/lib/dev-state/vcs1"
> Aug 8 23:57:01 o kernel: Console: colour VGA+ 80x25
> Aug 8 23:55:29 o devfsd[1032]: error calling: "unlink" in "GLOBAL"
> Aug 8 23:57:01 o kernel: Dentry cache hash table entries: 131072
> (order: 7, 524288 bytes)
> Aug 8 23:55:29 o pam_console.dev[1106]: Restoring console permissions
> for /dev/vcs1
> Aug 8 23:57:02 o kernel: Inode-cache hash table entries: 65536 (order:
> 6, 262144 bytes)
> Aug 8 23:57:02 o atd: Uruchamianie atd succeeded
> Aug 8 23:55:27 o devfsd[1032]: error calling: "unlink" in "GLOBAL"
> Aug 8 23:57:02 o kernel: Memory: 1294696k/1310704k available (2635k
> kernel code, 15188k reserved, 765k data, 268k init, 39
> 3200k highmem, 0k BadRAM)
> Aug 8 23:55:27 o devfsd[1032]: error copying: "/dev/vcsa1" to
> "/lib/dev-state/vcsa1"
> Aug 8 23:57:02 o kernel: Checking if this processor honours the WP bit
> even in supervisor mode... Ok.
> Aug 8 23:55:27 o devfsd[1032]: error copying: "/dev/vcsa1" to
> "/lib/dev-state/vcsa1"
> Aug 8 23:57:02 o kernel: Calibrating delay loop... 2580.48 BogoMIPS
> (lpj=1290240)
> Aug 8 23:57:02 o smartd[5715]: smartd version 5.33
> [i586-mandrake-linux-gnu] Copyright (C) 2002-4 Bruce Allen
> Aug 8 23:55:27 o devfsd[1032]: error copying: "/dev/vcsa1" to
> "/lib/dev-state/vcsa1"
> Aug 8 23:57:02 o kernel: Mount-cache hash table entries: 512 (order: 0,
> 4096 bytes)
> Aug 8 23:57:02 o smartd[5715]: Home page is
> http://smartmontools.sourceforge.net/
> Aug 8 23:55:27 o date: Mon Aug 8 23:55:27 CEST 2005
> Aug 8 23:57:02 o kernel: CPU: After generic identify, caps: 0383fbff
> c1c3fbff 00000000 00000000 00000000 00000000 00000000
> Aug 8 23:57:02 o smartd[5715]: Opened configuration
> file /etc/smartd.conf
> Aug 8 23:55:27 o rc.sysinit: Ustawianie zegara (utc): Mon Aug 8
> 23:55:27 CEST 2005 succeeded
> Aug 8 23:57:02 o kernel: CPU: After vendor identify, caps: 0383fbff
> c1c3fbff 00000000 00000000 00000000 00000000 00000000
> Aug 8 23:57:02 o smartd[5715]: Configuration file /etc/smartd.conf was
> parsed, found DEVICESCAN, scanning devices
> Aug 8 23:55:27 o pam_console.dev[1137]: Restoring console permissions
> for /dev/vcsa1
> Aug 8 23:57:02 o kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache
> 64K (64 bytes/line)
> Aug 8 23:57:02 o smartd[5715]: Device: /dev/hda, opened
> Aug 8 23:55:27 o devfsd[1032]: error copying: "/dev/vcs1" to
> "/lib/dev-state/vcs1"
> Aug 8 23:57:02 o kernel: CPU: L2 Cache: 64K (64 bytes/line)
> Aug 8 23:55:27 o devfsd[1032]: error copying: "/dev/vcs1" to
> "/lib/dev-state/vcs1"
> Aug 8 23:57:02 o smartd[5715]: Device: /dev/hda, found in smartd
> database.
> Aug 8 23:57:02 o kernel: CPU: After all inits, caps: 0383fbff c1c3fbff
> 00000000 00000020 00000000 00000000 00000000
> Aug 8 23:55:27 o devfsd[1032]: error copying: "/dev/vcs1" to
> "/lib/dev-state/vcs1"
> Aug 8 23:57:02 o smartd[5715]: Device: /dev/hda, enabled SMART
> Attribute Autosave.
> Aug 8 23:57:02 o kernel: Intel machine check architecture supported.
> Aug 8 23:55:27 o rc.sysinit: Ładowanie domyślnej mapy klawiatury
> succeeded
> Aug 8 23:57:03 o kernel: Intel machine check reporting enabled on
> CPU#0.
> Aug 8 23:57:03 o smartd[5715]: Device: /dev/hda, enabled SMART
> Automatic Offline Testing.
> Aug 8 23:55:27 o devfsd[1032]: error calling: "unlink" in "GLOBAL"
> Aug 8 23:57:03 o kernel: CPU: AMD Duron(TM) stepping 01
> Aug 8 23:57:03 o smartd[5715]: Device: /dev/hda, appears to lack SMART
> Self-Test log; disabling -l selftest (override with
> -T permissive Directive)
> Aug 8 23:55:27 o pam_console.dev[1160]: Restoring console permissions
> for /dev/vcs1
> Aug 8 23:57:03 o kernel: Enabling fast FPU save and restore... done.
> Aug 8 23:57:03 o smartd[5715]: Device: /dev/hda, appears to lack SMART
> Error log; disabling -l error (override with -T per
> missive Directive)
> Aug 8 23:55:27 o devfsd[1032]: error calling: "unlink" in "GLOBAL"
> Aug 8 23:57:03 o kernel: Enabling unmasked SIMD FPU exception
> support... done.
> Aug 8 23:57:03 o smartd[5715]: Device: /dev/hda, is SMART capable.
> Adding to "monitor" list.
> Aug 8 23:55:27 o devfsd[1032]: error copying: "/dev/vcsa1" to
> "/lib/dev-state/vcsa1"
> Aug 8 23:57:03 o kernel: Checking 'hlt' instruction... OK.
> Aug 8 23:57:03 o smartd[5715]: Device: /dev/hdb, opened
> Aug 8 23:55:27 o devfsd[1032]: error copying: "/dev/vcsa1" to
> "/lib/dev-state/vcsa1"
> Aug 8 23:57:03 o kernel: ENABLING IO-APIC IRQs
> Aug 8 23:57:03 o smartd[5715]: Device: /dev/hdb, found in smartd
> database.
> Aug 8 23:55:27 o devfsd[1032]: error copying: "/dev/vcsa1" to
> "/lib/dev-state/vcsa1"
> Aug 8 23:57:03 o kernel: ..TIMER: vector=0x31 pin1=2 pin2=-1
> Aug 8 23:57:03 o smartd[5715]: Device: /dev/hdb, enabled SMART
> Attribute Autosave.
> Aug 8 23:55:27 o rc.sysinit: Ustawianie nazwy hosta o: succeeded
> Aug 8 23:57:03 o kernel: NET: Registered protocol family 16
> Aug 8 23:57:04 o dhclient: DHCPDISCOVER on eth2 to 255.255.255.255 port
> 67 interval 8
> Aug 8 23:55:27 o pam_console.dev[1185]: Restoring console permissions
> for /dev/vcsa1
> Aug 8 23:57:04 o smartd[5715]: Device: /dev/hdb, is SMART capable.
> Adding to "monitor" list.
> Aug 8 23:57:04 o kernel: PCI: Using configuration type 1
> Aug 8 23:55:27 o devfsd[1032]: error copying: "/dev/vcs1" to
> "/lib/dev-state/vcs1"
> Aug 8 23:57:04 o smartd[5715]: Monitoring 2 ATA and 0 SCSI devices
> Aug 8 23:57:04 o kernel: mtrr: v2.0 (20020519)
> Aug 8 23:55:27 o devfsd[1032]: error copying: "/dev/vcs1" to
> "/lib/dev-state/vcs1"
> Aug 8 23:57:04 o kernel: ACPI: Subsystem revision 20050211
> Aug 8 23:57:05 o smartd[5715]: Device: /dev/hdb, SMART Usage Attribute:
> 194 Temperature_Celsius changed from 76 to 75
> Aug 8 23:55:27 o devfsd[1032]: error calling: "unlink" in "GLOBAL"
> Aug 8 23:57:05 o kernel: ACPI: Interpreter enabled
> Aug 8 23:57:05 o smartd[5717]: smartd has fork()ed into background
> mode. New PID=5717.
> Aug 8 23:55:27 o pam_console.dev[1213]: Restoring console permissions
> for /dev/vcs1
> Aug 8 23:57:05 o smartd: Uruchamianie smartd succeeded
> Aug 8 23:57:05 o kernel: ACPI: Using IOAPIC for interrupt routing
> Aug 8 23:55:28 o devfsd[1032]: error calling: "unlink" in "GLOBAL"
> Aug 8 23:57:05 o kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6
> 7 10 *11 12 14 15)
> Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcsa1" to
> "/lib/dev-state/vcsa1"
> Aug 8 23:57:05 o kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6
> 7 10 11 12 14 15) *9
> Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcsa1" to
> "/lib/dev-state/vcsa1"
> Aug 8 23:57:05 o kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6
> 7 10 11 12 14 15)
> Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcsa1" to
> "/lib/dev-state/vcsa1"
> Aug 8 23:57:06 o kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6
> 7 10 11 12 14 15) *9
> Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcs1" to
> "/lib/dev-state/vcs1"
> Aug 8 23:57:06 o kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6
> 7 *10 11 12 14)
> Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcs1" to
> "/lib/dev-state/vcs1"
> Aug 8 23:57:06 o kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
> Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcs1" to
> "/lib/dev-state/vcs1"
> Aug 8 23:57:06 o kernel: PCI: Probing PCI hardware (bus 00)
> Aug 8 23:55:28 o pam_console.dev[1255]: Restoring console permissions
> for /dev/vcsa1
> Aug 8 23:57:06 o kernel: PCI: Via IRQ fixup
> Aug 8 23:55:28 o pam_console.dev[1273]: Restoring console permissions
> for /dev/vcs1
> Aug 8 23:57:06 o net.agent[5766]: how do I bring interfaces up on this
> distro?
> Aug 8 23:57:06 o kernel: ACPI: PCI Interrupt Routing Table
> [\_SB_.PCI0._PRT]
> Aug 8 23:55:28 o devfsd[1032]: error calling: "unlink" in "GLOBAL"
> Aug 8 23:57:06 o net.agent[5766]: add event not handled
> Aug 8 23:57:06 o kernel: ACPI: PCI Interrupt Routing Table
> [\_SB_.PCI0.PCI1._PRT]
> Aug 8 23:55:28 o devfsd[1032]: error calling: "unlink" in "GLOBAL"
> Aug 8 23:57:06 o kernel: Linux Plug and Play Support v0.97 (c) Adam
> Belay
> Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcsa1" to
> "/lib/dev-state/vcsa1"
> Aug 8 23:57:06 o kernel: pnp: PnP ACPI init
> Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcsa1" to
> "/lib/dev-state/vcsa1"
> Aug 8 23:57:06 o kernel: pnp: PnP ACPI: found 14 devices
> Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcsa1" to
> "/lib/dev-state/vcsa1"
> Aug 8 23:57:06 o kernel: PnPBIOS: Disabled
> Aug 8 23:55:28 o pam_console.dev[1341]: Restoring console permissions
> for /dev/vcsa1
> Aug 8 23:57:06 o kernel: PCI: Using ACPI for IRQ routing
> Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcs1" to
> "/lib/dev-state/vcs1"
> Aug 8 23:57:06 o sshd: uruchamianie succeeded
> Aug 8 23:57:06 o kernel: ** PCI interrupts are no longer routed
> automatically. If this
> Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcs1" to
> "/lib/dev-state/vcs1"
> Aug 8 23:57:06 o kernel: ** causes a device to stop working, it is
> probably because the
> Aug 8 23:57:06 o sshd[5795]: Server listening on :: port 443.
> Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcs1" to
> "/lib/dev-state/vcs1"
> Aug 8 23:57:06 o kernel: ** driver failed to call pci_enable_device().
> As a temporary
> Aug 8 23:57:06 o sshd[5795]: error: Bind to port 443 on 0.0.0.0 failed:
> Address already in use.
> Aug 8 23:55:28 o pam_console.dev[1357]: Restoring console permissions
> for /dev/vcs1
> Aug 8 23:57:06 o kernel: ** workaround, the "pci=routeirq" argument
> restores the old
> Aug 8 23:56:05 o modprobe: WARNING: Error inserting snd
> (/lib/modules/2.6.11-12mdkcustom/kernel/sound/core/snd.ko): Unknow
> n symbol in module, or unknown parameter (see dmesg) <29>Aug 8
> 23:56:05 modprobe: WARNING: Error inserting snd-seq-device (
> /lib/modules/2.6.11-12mdkcustom/kernel/sound/core/seq/snd-seq-device.ko): Unknown symbol in module, or unknown parameter (see
> dmesg)
> Aug 8 23:57:06 o kernel: ** behavior. If this argument makes the
> device work again,
> Aug 8 23:56:05 o usb.agent[1795]: ... can't load module snd-usb-audio
> Aug 8 23:57:06 o kernel: ** please email the output of "lspci" to
> bjorn.helgaas@hp.com
> Aug 8 23:56:05 o usb.agent[1795]: missing kernel or user mode driver
> snd-usb-audio
> Aug 8 23:57:07 o kernel: ** so I can fix the driver.
> Aug 8 23:57:07 o xinetd: Uruchamianie xinetd succeeded
> Aug 8 23:56:06 o usb: Inicjalizacja kontrolera USB (uhci-hcd):
> succeeded
> Aug 8 23:57:07 o xinetd[5813]: Reading included configuration
> file: /etc/xinetd.d/cups-lpd [file=/etc/xinetd.conf] [line=1
> 5]
> Aug 8 23:57:07 o kernel: pnp: 00:01: ioport range 0xe400-0xe47f could
> not be reserved
> Aug 8 23:56:06 o usb: Inicjalizacja kontrolera USB (ehci-hcd):
> succeeded
> Aug 8 23:57:09 o vsftpd: vsftpd vsftpd succeeded
> Aug 8 23:57:09 o xinetd[5813]: Reading included configuration
> file: /etc/xinetd.d/cvs [file=/etc/xinetd.d/cvs] [line=15]
> Aug 8 23:57:09 o kernel: pnp: 00:01: ioport range 0xe800-0xe81f has
> been reserved
> Aug 8 23:56:06 o usb: Montowanie systemu plików USB succeeded
> Aug 8 23:57:09 o xinetd[5813]: Reading included configuration
> file: /etc/xinetd.d/imap [file=/etc/xinetd.d/imap] [line=12]
> Aug 8 23:57:09 o dhcpd: Not searching LDAP since ldap-server, ldap-port
> and ldap-base-dn were not specified in the config
> file
> Aug 8 23:57:09 o kernel: pnp: 00:0d: ioport range 0x290-0x291 has been
> reserved
> Aug 8 23:56:07 o modprobe: cupsd: no process killed
> Aug 8 23:57:09 o xinetd[5813]: Reading included configuration
> file: /etc/xinetd.d/imaps [file=/etc/xinetd.d/imaps] [line=1
> 4]
> Aug 8 23:57:09 o dhcpd: Wrote 0 deleted host decls to leases file.
> Aug 8 23:57:09 o kernel: pnp: 00:0d: ioport range 0x370-0x372 has been
> reserved
> Aug 8 23:56:07 o usb: Ładowanie modułu kernela dla drukarki USB
> succeeded
> Aug 8 23:57:10 o xinetd[5813]: Reading included configuration
> file: /etc/xinetd.d/ipop2 [file=/etc/xinetd.d/ipop2] [line=1
> 4]
> Aug 8 23:57:10 o dhcpd: Wrote 0 new dynamic host decls to leases file.
> Aug 8 23:57:10 o kernel: Simple Boot Flag at 0x3a set to 0x1
> Aug 8 23:56:12 o fsck: /dev/hda1: clean, 393053/3499328 files,
> 4493127/6986259 blocks
> Aug 8 23:57:10 o xinetd[5813]: Reading included configuration
> file: /etc/xinetd.d/ipop3 [file=/etc/xinetd.d/ipop3] [line=1
> 5]
> Aug 8 23:57:10 o dhcpd: Wrote 0 leases to leases file.
> Aug 8 23:57:10 o kernel: apm: BIOS version 1.2 Flags 0x03 (Driver
> version 1.16ac)
> Aug 8 23:56:12 o rc.sysinit: Ponowne montowanie gł. systemu plików w
> trybie do odczytu i zapisu: succeeded
> Aug 8 23:57:10 o xinetd[5813]: Reading included configuration
> file: /etc/xinetd.d/pop3s [file=/etc/xinetd.d/pop3s] [line=1
> 3]
> Aug 8 23:57:10 o kernel: apm: overridden by ACPI.
> Aug 8 23:57:10 o dhcpd:
> Aug 8 23:56:15 o rc.sysinit: Aktywacja partycji wymiany: succeeded
> Aug 8 23:57:10 o xinetd[5813]: Reading included configuration
> file: /etc/xinetd.d/rsync [file=/etc/xinetd.d/rsync] [line=1
> 3]
> Aug 8 23:57:10 o kernel: audit: initializing netlink socket (disabled)
> Aug 8 23:57:10 o dhcpd: No subnet declaration for eth0 (192.168.1.232).
> Aug 8 23:56:16 o : Loading module: nvidia
> Aug 8 23:57:10 o xinetd[5813]: Reading included configuration
> file: /etc/xinetd.d/sshd-xinetd [file=/etc/xinetd.d/sshd-xin
> etd] [line=13]
> Aug 8 23:57:10 o kernel: audit(1123538119.408:0): initialized
> Aug 8 23:57:10 o dhcpd: ** Ignoring requests on eth0. If this is not
> what
> Aug 8 23:56:17 o : Loading module: bttv
> Aug 8 23:57:10 o xinetd[5813]: removing printer
> Aug 8 23:57:10 o kernel: highmem bounce pool size: 64 pages
> Aug 8 23:57:10 o dhcpd: you want, please write a subnet declaration
> Aug 8 23:56:18 o : Loading module: bt878
> Aug 8 23:57:10 o xinetd[5813]: removing cvspserver
> Aug 8 23:57:10 o kernel: Total HugeTLB memory allocated, 0
> Aug 8 23:57:10 o dhcpd: in your dhcpd.conf file for the network
> segment
> Aug 8 23:56:18 o : Loading module: via-agp
> Aug 8 23:57:10 o xinetd[5813]: removing imap
> Aug 8 23:57:10 o kernel: inotify device minor=63
> Aug 8 23:57:10 o dhcpd: to which interface eth0 is attached. **
> Aug 8 23:56:19 o fsck: /dev/hdb1: recovering journal
> Aug 8 23:57:10 o xinetd[5813]: removing imaps
> Aug 8 23:57:10 o kernel: VFS: Disk quotas dquot_6.5.1
> Aug 8 23:57:10 o dhcpd:
> Aug 8 23:56:21 o fsck: /dev/hdb1: clean, 124308/7340032 files,
> 7477522/14657296 blocks
> Aug 8 23:57:11 o xinetd[5813]: removing pop2
> Aug 8 23:57:11 o kernel: Dquot-cache hash table entries: 1024 (order 0,
> 4096 bytes)
> Aug 8 23:56:22 o rc.sysinit: Montowanie lokalnych systemów plików:
> succeeded
> Aug 8 23:57:11 o xinetd[5813]: removing rsync
> Aug 8 23:57:11 o dhcpd: Uruchamianie dhcpd succeeded
> Aug 8 23:57:11 o kernel: devfs: 2004-01-31 Richard Gooch
> (rgooch@atnf.csiro.au)
> Aug 8 23:56:22 o rc.sysinit: Montowanie plikopartycji: succeeded
> Aug 8 23:57:11 o xinetd[5813]: removing ssh
> Aug 8 23:57:11 o kernel: devfs: boot_options: 0x1
> Aug 8 23:56:23 o loadkeys:
> Loading /usr/lib/kbd/keymaps/i386/qwerty/pl.kmap.gz
> Aug 8 23:57:11 o xinetd[5813]: xinetd Version 2.3.13 started with
> libwrap options compiled in.
> Aug 8 23:57:11 o kernel: Supermount version 2.0.4 for kernel 2.6
> Aug 8 23:57:11 o loadkeys:
> Loading /usr/lib/kbd/keymaps/i386/qwerty/pl.kmap.gz
> Aug 8 23:56:24 o pam_console.dev[3126]: Restoring console permissions
> for /dev/dsp
> Aug 8 23:57:11 o xinetd[5813]: Started working: 2 available services
> Aug 8 23:57:11 o kernel: Initializing Cryptographic API
> Aug 8 23:57:11 o keytable: Ładowanie mapy klawiatury: pl succeeded
> Aug 8 23:56:24 o pam_console.dev[3124]: Restoring console permissions
> for /dev/snd/pcmC2D1c
> Aug 8 23:57:11 o kernel: isapnp: Scanning for PnP cards...
> Aug 8 23:56:24 o pam_console.dev[3114]: Restoring console permissions
> for /dev/dsp1
> Aug 8 23:57:11 o kernel: isapnp: No Plug & Play device found
> Aug 8 23:57:11 o loadkeys:
> Loading /usr/lib/kbd/keymaps/include/compose.latin2.inc.gz
> Aug 8 23:56:24 o pam_console.dev[3110]: Restoring console permissions
> for /dev/audio2
> Aug 8 23:57:11 o kernel: Real Time Clock Driver v1.12
> Aug 8 23:56:24 o pam_console.dev[3100]: Restoring console permissions
> for /dev/mixer2
> ug 8 23:57:11 o kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
> Aug 8 23:56:24 o pam_console.dev[3096]: Restoring console permissions
> for /dev/mixer1
> Aug 8 23:57:11 o keytable: Ładowanie klawiszy kompozycji:
> compose.latin2.inc succeeded
> Aug 8 23:57:11 o kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
> Aug 8 23:56:24 o pam_console.dev[3052]: Restoring console permissions
> for /dev/nvidiactl
> Aug 8 23:57:11 o kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 8
> ports, IRQ sharing enabled
> Aug 8 23:56:24 o pam_console.dev[3037]: Restoring console permissions
> for /dev/snd/pcmC2D0p
> Aug 8 23:57:11 o kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> Aug 8 23:56:24 o pam_console.dev[3092]: Restoring console permissions
> for /dev/mixer
> Aug 8 23:57:11 o kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> Aug 8 23:56:24 o pam_console.dev[3027]: Restoring console permissions
> for /dev/snd/pcmC2D2p
> Aug 8 23:57:11 o kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> Aug 8 23:56:24 o pam_console.dev[3023]: Restoring console permissions
> for /dev/snd/pcmC2D3p
> Aug 8 23:57:11 o kernel: io scheduler noop registered
> Aug 8 23:56:24 o pam_console.dev[3076]: Restoring console permissions
> for /dev/dsp2
> Aug 8 23:57:11 o kernel: io scheduler anticipatory registered
> Aug 8 23:57:11 o keytable: succeeded
> Aug 8 23:56:24 o pam_console.dev[3072]: Restoring console permissions
> for /dev/snd/controlC2
> Aug 8 23:57:11 o kernel: io scheduler deadline registered
> Aug 8 23:56:24 o pam_console.dev[3015]: Restoring console permissions
> for /dev/snd/pcmC1D0c
> Aug 8 23:57:11 o kernel: io scheduler cfq registered
> Aug 8 23:56:24 o pam_console.dev[3011]: Restoring console permissions
> for /dev/snd/controlC0
> Aug 8 23:57:11 o kernel: RAMDISK driver initialized: 16 RAM disks of
> 32000K size 1024 blocksize
> Aug 8 23:56:24 o pam_console.dev[3068]: Restoring console permissions
> for /dev/snd/pcmC2D0c
> Aug 8 23:57:11 o kernel: pktcdvd: v0.2.0a 2004-07-14 Jens Axboe
> (axboe@suse.de) and petero2@telia.com
> Aug 8 23:56:24 o pam_console.dev[3064]: Restoring console permissions
> for /dev/snd/midiC2D0
> Aug 8 23:57:11 o kernel: Uniform Multi-Platform E-IDE driver Revision:
> 7.00alpha2
> Aug 8 23:56:24 o pam_console.dev[3007]: Restoring console permissions
> for /dev/snd/pcmC0D0c
> Aug 8 23:57:12 o dhclient: DHCPDISCOVER on eth2 to 255.255.255.255 port
> 67 interval 7
> Aug 8 23:57:12 o kernel: ide: Assuming 33MHz system bus speed for PIO
> modes; override with idebus=xx
> Aug 8 23:56:24 o pam_console.dev[3031]: Restoring console permissions
> for /dev/snd/pcmC2D2c
> Aug 8 23:57:12 o kernel: VP_IDE: IDE controller at PCI slot
> 0000:00:11.1
> Aug 8 23:56:24 o pam_console.dev[3019]: Restoring console permissions
> for /dev/snd/controlC1
> Aug 8 23:57:12 o kernel: ACPI: PCI interrupt 0000:00:11.1[A]: no GSI -
> using IRQ 0
> Aug 8 23:56:24 o pam_console.dev[3001]: Restoring console permissions
> for /dev/nvidia0
> Aug 8 23:57:12 o kernel: VP_IDE: chipset revision 6
> Aug 8 23:56:24 o pam_console.dev[3057]: Restoring console permissions
> for /dev/snd/timer
> Aug 8 23:57:12 o kernel: VP_IDE: not 100%% native mode: will probe irqs
> later
> ug 8 23:56:24 o pam_console.dev[3049]: Restoring console permissions
> for /dev/agpgart
> Aug 8 23:57:12 o kernel: VP_IDE: VIA vt8233a (rev 00) IDE UDMA133
> controller on pci0000:00:11.1
> Aug 8 23:56:24 o pam_console.dev[3118]: Restoring console permissions
> for /dev/audio1
> Aug 8 23:57:12 o kernel: ide0: BM-DMA at 0xa800-0xa807, BIOS
> settings: hda:DMA, hdb:DMA
> Aug 8 23:56:24 o pam_console.dev[3106]: Restoring console permissions
> for /dev/audio
> Aug 8 23:57:12 o kernel: ide1: BM-DMA at 0xa808-0xa80f, BIOS
> settings: hdc:DMA, hdd:pio
> Aug 8 23:56:24 o pam_console.dev[3088]: Restoring console permissions
> for /dev/midi2
> Aug 8 23:57:12 o kernel: Probing IDE interface ide0...
> Aug 8 23:56:24 o pam_console.dev[3084]: Restoring console permissions
> for /dev/dmmidi2
> Aug 8 23:57:12 o kernel: hda: Maxtor 33073U4, ATA DISK drive
> Aug 8 23:56:24 o pam_console.dev[3080]: Restoring console permissions
> for /dev/adsp2
> Aug 8 23:57:12 o kernel: hdb: MAXTOR 6L060J3, ATA DISK drive
> Aug 8 23:56:24 o pam_console.dev[3060]: Restoring console permissions
> for /dev/snd/hwC2D0
> Aug 8 23:57:12 o kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> Aug 8 23:56:24 o keytable: Ładowanie mapy klawiatury: pl succeeded
> Aug 8 23:57:12 o kernel: Probing IDE interface ide1...
> Aug 8 23:57:12 o oidentd: Uruchamianie oidentd succeeded
> Aug 8 23:56:25 o loadkeys:
> Loading /usr/lib/kbd/keymaps/include/compose.latin2.inc.gz
> Aug 8 23:57:12 o kernel: hdc: CD-RW BCE4816IM, ATAPI CD/DVD-ROM drive
> Aug 8 23:56:25 o keytable: Ładowanie klawiszy kompozycji:
> compose.latin2.inc succeeded
> Aug 8 23:57:12 o kernel: ide1 at 0x170-0x177,0x376 on irq 15
> Aug 8 23:56:26 o keytable: succeeded
> Aug 8 23:57:12 o kernel: hda: max request size: 128KiB
> Aug 8 23:56:28 o rc.sysinit: Uaktywnianie przestrzeni wymiany:
> succeeded
> Aug 8 23:57:12 o kernel: hda: 60030432 sectors (30735 MB) w/512KiB
> Cache, CHS=59554/16/63, UDMA(100)
> Aug 8 23:56:29 o rc.sysinit: Inicjalizacja kontrolera firewire
> (ohci1394): succeeded
> Aug 8 23:57:12 o kernel: hda: cache flushes not supported
> Aug 8 23:56:29 o ieee1394.agent[3794]: ... no drivers for IEEE1394
> product 0x/0x/0x
> Aug 8 23:57:12 o kernel: /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5
> >
> Aug 8 23:56:30 o ieee1394.agent[3958]: ... no drivers for IEEE1394
> product 0x/0x/0x
> Aug 8 23:57:13 o kernel: hdb: max request size: 128KiB
> Aug 8 23:56:30 o ieee1394.agent[3972]: ... no drivers for IEEE1394
> product 0x/0x/0x
> Aug 8 23:57:13 o kernel: hdb: 117266688 sectors (60040 MB) w/1819KiB
> Cache, CHS=65535/16/63, UDMA(133)
> Aug 8 23:56:31 o mandrake_everytime: Uruchamianie netprofile: succeeded
> Aug 8 23:57:13 o kernel: hdb: cache flushes supported
> Aug 8 23:56:31 o init: Entering runlevel: 3
> Aug 8 23:57:13 o kernel: /dev/ide/host0/bus0/target1/lun0: p1
> Aug 8 23:56:34 o INIT: Loading ACPI module ac: successfull
> Aug 8 23:57:13 o kernel: mice: PS/2 mouse device common for all mice
> Aug 8 23:56:34 o INIT: Loading ACPI module battery: successfull
> Aug 8 23:57:13 o kernel: input: AT Translated Set 2 keyboard on
> isa0060/serio0
> Aug 8 23:56:34 o INIT: Loading ACPI module button: successfull
> Aug 8 23:57:13 o kernel: input: PS/2 Generic Mouse on isa0060/serio1
> Aug 8 23:56:35 o INIT: Loading ACPI module container: successfull
> Aug 8 23:57:13 o kernel: md: md driver 0.90.1 MAX_MD_DEVS=256,
> MD_SB_DISKS=27
> Aug 8 23:56:35 o INIT: Loading ACPI module fan: successfull
> Aug 8 23:57:13 o kernel: NET: Registered protocol family 2
> Aug 8 23:56:35 o INIT: Loading ACPI module processor: successfull
> Aug 8 23:57:13 o kernel: IP: routing cache hash table of 16384 buckets,
> 128Kbytes
> Aug 8 23:56:35 o INIT: Loading ACPI module tc1100-wmi: successfull
> Aug 8 23:57:13 o kernel: TCP established hash table entries: 262144
> (order: 9, 2097152 bytes)
> Aug 8 23:56:35 o INIT: Loading ACPI module thermal: successfull
> Aug 8 23:57:13 o kernel: TCP bind hash table entries: 65536 (order: 6,
> 262144 bytes)
> Aug 8 23:56:35 o INIT: Loading ACPI module video: successfull
> Aug 8 23:57:13 o kernel: TCP: Hash tables configured (established
> 262144 bind 65536)
> Aug 8 23:56:40 o rc: Uruchamianie dkms: succeeded
> Aug 8 23:57:13 o kernel: NET: Registered protocol family 1
> Aug 8 23:56:46 o sensord: sensord started
> Aug 8 23:57:13 o kernel: ACPI wakeup devices:
> Aug 8 23:56:46 o sensord: Chip: asb100-i2c-1-2d
> Aug 8 23:57:13 o kernel: PCI0 PCI1 UAR1 USB0 USB1
> Aug 8 23:56:46 o sensord: Adapter: SMBus Via Pro adapter at e800
> Aug 8 23:57:13 o kernel: ACPI: (supports S0 S1 S4 S5)
> Aug 8 23:56:46 o sensord: Algorithm: Unavailable from sysfs
> Aug 8 23:57:13 o kernel: BIOS EDD facility v0.16 2004-Jun-25, 2 devices
> found
> Aug 8 23:56:46 o lm_sensors: Uruchamianie sensord succeeded
> Aug 8 23:57:13 o kernel: devfs_mk_dev: could not append to parent for
> md/0
> Aug 8 23:56:46 o sensord: VCore 1: +1.84 V (min = +1.71 V, max =
> +1.89 V)
> Aug 8 23:57:13 o kernel: md: Autodetecting RAID arrays.
> Aug 8 23:56:46 o sensord: +3.3V: +3.33 V (min = +3.14 V, max = +3.47
> V)
> Aug 8 23:57:13 o kernel: md: autorun ...
> Aug 8 23:56:46 o sensord: +5V: +5.00 V (min = +4.76 V, max = +5.24 V)
> Aug 8 23:57:14 o kernel: md: ... autorun DONE.
> Aug 8 23:56:46 o sensord: +12V: +12.65 V (min = +10.82 V, max =
> +13.19 V)
> Aug 8 23:57:14 o kernel: EXT3-fs: INFO: recovery required on readonly
> filesystem.
> Aug 8 23:56:46 o sensord: -12V (reserved): -13.15 V (min = -0.00 V,
> max = -0.00 V)
> Aug 8 23:57:14 o kernel: EXT3-fs: write access will be enabled during
> recovery.
> Aug 8 23:56:46 o sensord: -5V (reserved): -5.52 V (min = -0.00 V, max
> = -0.00 V)
> Aug 8 23:57:14 o kernel: kjournald starting. Commit interval 5 seconds
> Aug 8 23:56:46 o sensord: CPU Fan: 2033 RPM (min = 664 RPM, div = -0)
> Aug 8 23:57:14 o kernel: EXT3-fs: hda1: orphan cleanup on readonly fs
> Aug 8 23:56:46 o sensord: Power Fan: 1288 RPM (min = 664 RPM, div =
> -0)
> Aug 8 23:57:14 o kernel: ext3_orphan_cleanup: deleting unreferenced
> inode 3467492
> Aug 8 23:56:46 o sensord: Chassic Fan: 1562 RPM (min = 664 RPM, div =
> -0)
> Aug 8 23:57:14 o kernel: ext3_orphan_cleanup: deleting unreferenced
> inode 2142121
> Aug 8 23:56:46 o sensord: M/B Temp: 44.0 C (limit = 40 C, hysteresis
> = 45 C)
> Aug 8 23:57:14 o kernel: EXT3-fs: hda1: 2 orphan inodes deleted
> Aug 8 23:56:46 o sensord: CPU Temp (Intel): 69.5 C (limit = 50 C,
> hysteresis = 60 C)
> Aug 8 23:57:14 o kernel: EXT3-fs: recovery complete.
> Aug 8 23:56:46 o sensord: Power Temp: 38.0 C (limit = 40 C,
> hysteresis = 45 C)
> Aug 8 23:57:14 o kernel: EXT3-fs: mounted filesystem with ordered data
> mode.
> Aug 8 23:56:46 o sensord: CPU Temp (AMD): 60.0 C (limit = 50 C,
> hysteresis = 60 C)
> Aug 8 23:57:14 o kernel: VFS: Mounted root (ext3 filesystem) readonly.
> Aug 8 23:56:46 o sensord: Chip: LG PAL_BG-i2c-0-61
> Aug 8 23:57:14 o kernel: Mounted devfs on /dev
> Aug 8 23:56:46 o sensord: Adapter: bt878 #0 [sw]
> Aug 8 23:57:14 o kernel: Freeing unused kernel memory: 268k freed
> Aug 8 23:56:46 o sensord: Algorithm: Unavailable from sysfs
> Aug 8 23:57:14 o kernel: ACPI: Power Button (FF) [PWRF]
> Aug 8 23:56:48 o network: Konfiguracja parametrów sieciowych:
> succeeded
> Aug 8 23:57:15 o kernel: ibm_acpi: ec object not found
> Aug 8 23:56:49 o postfix/postfix-script: fatal: the Postfix mail system
> is not running
> Aug 8 23:57:15 o postfix/postfix-script: starting the Postfix mail
> system
> Aug 8 23:57:15 o kernel: usbcore: registered new driver usbfs
> Aug 8 23:56:49 o network: Podnoszenie interfejsu lokalnego: succeeded
> Aug 8 23:57:15 o postfix: succeeded
> Aug 8 23:57:15 o postfix/master[6062]: daemon started -- version 2.1.5
> Aug 8 23:57:15 o kernel: usbcore: registered new driver hub
> Aug 8 23:56:52 o postfix/postfix-script: fatal: the Postfix mail system
> is not running
> Aug 8 23:57:15 o kernel: [eagle-usb] driver V2.2.0 loaded
> Aug 8 23:56:52 o network: Inicjowanie interfejsu eth0: succeeded
> Aug 8 23:57:16 o kernel: usbcore: registered new driver eagle-usb
> Aug 8 23:56:54 o postfix/postfix-script: fatal: the Postfix mail system
> is not running
> Aug 8 23:57:16 o kernel: Linux video capture interface: v1.00
> Aug 8 23:56:54 o network: Inicjowanie interfejsu eth1: succeeded
> Aug 8 23:57:16 o kernel: pwc Philips webcam module version
> 10.0.6-unofficial loaded.
> Aug 8 23:56:54 o ifplugd(eth2)[5369]: ifplugd 0.26 initializing.
> Aug 8 23:57:16 o kernel: pwc Supports Philips PCA645/646,
> PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
> Aug 8 23:56:54 o ifplugd(eth2)[5369]: Using interface
> eth2/00:E0:18:00:00:04 with driver <eth1394> (version: $Rev: 1224 $)
>
> Aug 8 23:57:16 o kernel: pwc Also supports the Askey VC010, various
> Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
> Aug 8 23:56:54 o ifplugd(eth2)[5369]: Using detection mode: IFF_RUNNING
> Aug 8 23:57:16 o kernel: pwc the Creative WebCam 5 & Pro Ex, SOTEC
> Afina Eye and Visionite VCS-UC300 and VCS-UM100.
> Aug 8 23:56:54 o ifplugd(eth2)[5369]: Initialization complete, link
> beat detected.
> Aug 8 23:57:16 o kernel: pwc Default framerate set to 5.
> Aug 8 23:56:54 o ifplugd(eth2)[5369]: Executing
> '/etc/ifplugd/ifplugd.action eth2 up'.
> Aug 8 23:57:16 o kernel: pwc Default image size set to vga [640x480].
> Aug 8 23:56:54 o dhclient: eth2: unknown hardware address type 24
> Aug 8 23:57:17 o kernel: pwc Trace options: 0x00a1
> Aug 8 23:56:55 o network: Inicjowanie interfejsu eth2: succeeded
> Aug 8 23:57:17 o kernel: pwc Preferred compression set to 1.
> Aug 8 23:57:17 o httpd: Uruchamianie httpd succeeded
> Aug 8 23:57:17 o kernel: usbcore: registered new driver Philips webcam
> Aug 8 23:57:18 o rc: Uruchamianie kheader: succeeded
> Aug 8 23:57:18 o kernel: USB Universal Host Controller Interface driver
> v2.2
> Aug 8 23:57:19 o dhclient: DHCPDISCOVER on eth2 to 255.255.255.255 port
> 67 interval 11
> Aug 8 23:57:19 o kernel: ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 19
> (level, low) -> IRQ 19
> Aug 8 23:57:19 o devfsd[1032]: Caught SIGHUP
> Aug 8 23:57:19 o devfsd: Uruchamianie czynności devfsd: succeeded
> Aug 8 23:57:19 o kernel: uhci_hcd 0000:00:09.0: UHCI Host Controller
> Aug 8 23:57:19 o devfsd[1032]: read config file:
> "/etc/devfs/conf.d//mouse.conf"
> Aug 8 23:57:21 o kernel: uhci_hcd 0000:00:09.0: irq 19, io base 0xd800
> Aug 8 23:57:22 o devfsd[1032]: read config file:
> "/etc/devfs/conf.d//dynamic.conf"
> Aug 8 23:57:22 o kernel: uhci_hcd 0000:00:09.0: new USB bus registered,
> assigned bus number 1
> Aug 8 23:57:22 o devfsd[1032]: read config file:
> "/etc/devfs/conf.d//rfcomm.conf"
> Aug 8 23:57:22 o kernel: hub 1-0:1.0: USB hub found
> Aug 8 23:57:22 o devfsd[1032]: read config file:
> "/etc/devfs/conf.d//mk712.conf"
> Aug 8 23:57:22 o kernel: hub 1-0:1.0: 2 ports detected
> Aug 8 23:57:22 o devfsd[1032]: read config file: "/etc/devfsd.conf"
> Aug 8 23:57:22 o kernel: ACPI: PCI interrupt 0000:00:09.1[B] -> GSI 16
> (level, low) -> IRQ 16
> Aug 8 23:57:22 o devfsd[6285]: error execing:
> "/etc/dynamic/scripts/part.script"^INo such file or directory
> Aug 8 23:57:22 o kernel: uhci_hcd 0000:00:09.1: UHCI Host Controller
> Aug 8 23:57:22 o devfsd[6286]: error execing:
> "/etc/dynamic/scripts/part.script"^INo such file or directory
> Aug 8 23:57:22 o kernel: uhci_hcd 0000:00:09.1: irq 16, io base 0xd400
> Aug 8 23:57:22 o devfsd[6287]: error execing:
> "/etc/dynamic/scripts/part.script"^INo such file or directory
> Aug 8 23:57:22 o kernel: uhci_hcd 0000:00:09.1: new USB bus registered,
> assigned bus number 2
> Aug 8 23:57:22 o devfsd[6289]: error execing:
> "/etc/dynamic/scripts/part.script"^INo such file or directory
> Aug 8 23:57:22 o kernel: hub 2-0:1.0: USB hub found
> Aug 8 23:57:22 o kernel: hub 2-0:1.0: 2 ports detected
> Aug 8 23:57:22 o kernel: ACPI: PCI interrupt 0000:00:11.2[D] -> GSI 21
> (level, low) -> IRQ 21
> Aug 8 23:57:22 o kernel: uhci_hcd 0000:00:11.2: UHCI Host Controller
> Aug 8 23:57:22 o kernel: uhci_hcd 0000:00:11.2: irq 21, io base 0xa400
> Aug 8 23:57:22 o kernel: uhci_hcd 0000:00:11.2: new USB bus registered,
> assigned bus number 3
> Aug 8 23:57:22 o kernel: hub 3-0:1.0: USB hub found
> Aug 8 23:57:22 o kernel: hub 3-0:1.0: 2 ports detected
> Aug 8 23:57:22 o kernel: ACPI: PCI interrupt 0000:00:11.3[D] -> GSI 21
> (level, low) -> IRQ 21
> Aug 8 23:57:22 o kernel: uhci_hcd 0000:00:11.3: UHCI Host Controller
> Aug 8 23:57:22 o kernel: uhci_hcd 0000:00:11.3: irq 21, io base 0xa000
> Aug 8 23:57:22 o kernel: uhci_hcd 0000:00:11.3: new USB bus registered,
> assigned bus number 4
> Aug 8 23:57:22 o kernel: hub 4-0:1.0: USB hub found
> Aug 8 23:57:23 o kernel: hub 4-0:1.0: 2 ports detected
> Aug 8 23:57:23 o kernel: usb 4-1: new full speed USB device using
> uhci_hcd and address 2
> Aug 8 23:57:23 o kernel: [eagle-usb] New USB ADSL device detected,
> waiting for DSP code...
> Aug 8 23:57:23 o kernel: [eagle-usb] Interface 0 accepted.
> Aug 8 23:57:23 o kernel: [eagle-usb] created proc entry
> at : /proc/driver/eagle-usb/004-002
> Aug 8 23:57:23 o kernel: ACPI: PCI interrupt 0000:00:09.2[C] -> GSI 17
> (level, low) -> IRQ 17
> Aug 8 23:57:23 o kernel: ehci_hcd 0000:00:09.2: EHCI Host Controller
> Aug 8 23:57:23 o kernel: ehci_hcd 0000:00:09.2: irq 17, pci mem
> 0xe9800000
> Aug 8 23:57:23 o kernel: ehci_hcd 0000:00:09.2: new USB bus registered,
> assigned bus number 5
> Aug 8 23:57:23 o kernel: ehci_hcd 0000:00:09.2: USB 2.0 initialized,
> EHCI 0.95, driver 10 Dec 2004
> Aug 8 23:57:23 o kernel: hub 5-0:1.0: USB hub found
> Aug 8 23:57:23 o kernel: hub 5-0:1.0: 4 ports detected
> Aug 8 23:57:23 o kernel: usb 1-1: new full speed USB device using
> uhci_hcd and address 2
> Aug 8 23:57:23 o kernel: pwc Philips PCVC740K (ToUCam Pro)/PCVC840
> (ToUCam II) USB webcam detected.
> Aug 8 23:57:23 o kernel: pwc Registered as /dev/video5.
> Aug 8 23:57:23 o kernel: usb 1-2: new full speed USB device using
> uhci_hcd and address 3
> Aug 8 23:57:23 o kernel: hub 1-2:1.0: USB hub found
> Aug 8 23:57:23 o kernel: hub 1-2:1.0: 4 ports detected
> Aug 8 23:57:23 o kernel: usb 1-2.3: new full speed USB device using
> uhci_hcd and address 4
> Aug 8 23:57:23 o kernel: pwc Philips PCVC740K (ToUCam Pro)/PCVC840
> (ToUCam II) USB webcam detected.
> Aug 8 23:57:23 o kernel: pwc Registered as /dev/video9.
> Aug 8 23:57:23 o kernel: usb 1-2.3: 400mA over 100mA budget!
> Aug 8 23:57:23 o kernel: hub 1-2:1.0: 100mA over power budget!
> Aug 8 23:57:23 o kernel: usbcore: deregistering driver eagle-usb
> Aug 8 23:57:23 o kernel: [eagle-usb] ADSL device removed
> Aug 8 23:57:23 o kernel: [eagle-usb] driver unloaded
> Aug 8 23:57:23 o kernel: snd: Unknown symbol unregister_sound_special
> Aug 8 23:57:23 o kernel: snd: Unknown symbol register_sound_special
> Aug 8 23:57:23 o kernel: snd: Unknown symbol sound_class
> Aug 8 23:57:23 o kernel: snd-seq-device: Unknown symbol
> snd_info_register
> Aug 8 23:57:23 o kernel: snd-seq-device: Unknown symbol
> snd_info_create_module_entry
> Aug 8 23:57:23 o kernel: snd-seq-device: Unknown symbol
> snd_info_free_entry
> Aug 8 23:57:23 o kernel: snd-seq-device: Unknown symbol snd_seq_root
> Aug 8 23:57:23 o kernel: snd-seq-device: Unknown symbol snd_iprintf
> Aug 8 23:57:23 o kernel: snd-seq-device: Unknown symbol snd_device_new
> Aug 8 23:57:23 o kernel: snd-seq-device: Unknown symbol
> snd_info_unregister
> Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol snd_info_register
> Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol snd_seq_device_new
> Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol
> snd_info_free_entry
> Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol
> snd_unregister_oss_device
> Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol
> snd_register_oss_device
> Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol
> snd_ctl_register_ioctl
> Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol snd_card_file_add
> Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol snd_iprintf
> Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol
> snd_oss_info_register
> Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol
> snd_unregister_device
> Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol snd_device_new
> Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol
> snd_ctl_unregister_ioctl
> Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol
> snd_info_create_card_entry
> Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol snd_device_free
> Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol
> snd_card_file_remove
> Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol
> snd_info_unregister
> Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol
> snd_device_register
> Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol
> snd_register_device
> Aug 8 23:57:23 o kernel: snd-usb-lib: Unknown symbol
> snd_rawmidi_receive
> Aug 8 23:57:23 o kernel: snd-usb-lib: Unknown symbol
> snd_rawmidi_transmit_empty
> Aug 8 23:57:23 o kernel: snd-usb-lib: Unknown symbol
> snd_rawmidi_transmit
> Aug 8 23:57:23 o kernel: snd-usb-lib: Unknown symbol
> snd_rawmidi_transmit_ack
> Aug 8 23:57:23 o kernel: snd-usb-lib: Unknown symbol
> snd_rawmidi_transmit_peek
> Aug 8 23:57:23 o kernel: snd-usb-lib: Unknown symbol snd_rawmidi_new
> Aug 8 23:57:23 o kernel: snd-usb-lib: Unknown symbol
> snd_rawmidi_set_ops
> Aug 8 23:57:23 o kernel: snd-timer: Unknown symbol snd_info_register
> Aug 8 23:57:23 o kernel: snd-timer: Unknown symbol
> snd_info_create_module_entry
> Aug 8 23:57:23 o kernel: snd-timer: Unknown symbol snd_info_free_entry
> Aug 8 23:57:23 o kernel: snd-timer: Unknown symbol snd_iprintf
> Aug 8 23:57:23 o kernel: snd-timer: Unknown symbol snd_ecards_limit
> Aug 8 23:57:23 o kernel: snd-timer: Unknown symbol
> snd_oss_info_register
> Aug 8 23:57:23 o kernel: snd-timer: Unknown symbol
> snd_unregister_device
> Aug 8 23:57:24 o kernel: snd-timer: Unknown symbol snd_device_new
> Aug 8 23:57:24 o kernel: snd-timer: Unknown symbol snd_kmalloc_strdup
> Aug 8 23:57:24 o kernel: snd-timer: Unknown symbol snd_info_unregister
> Aug 8 23:57:24 o kernel: snd-timer: Unknown symbol snd_register_device
> Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_info_register
> Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol
> snd_info_create_module_entry
> Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_timer_notify
> Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_timer_interrupt
> Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_info_free_entry
> Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_info_get_str
> Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_ctl_register_ioctl
> Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_card_file_add
> Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_iprintf
> Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_major
> Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_unregister_device
> Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_timer_new
> Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_device_new
> Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol
> snd_ctl_unregister_ioctl
> Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol
> snd_info_create_card_entry
> Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_power_wait
> Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_device_free
> Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_card_file_remove
> Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_info_unregister
> Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_device_register
> Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_register_device
> Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_info_get_line
> Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol snd_ctl_add
> Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol snd_pcm_new
> Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
> snd_card_register
> Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol snd_card_free
> Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
> snd_card_proc_new
> Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
> snd_usb_create_midi_interface
> Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol snd_pcm_stop
> Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
> snd_pcm_hw_constraint_minmax
> Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
> snd_pcm_format_physical_width
> Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol snd_ctl_free_one
> Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol snd_ctl_find_id
> Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol snd_ctl_new1
> Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
> snd_component_add
> Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
> snd_pcm_hw_rule_add
> Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol snd_card_new
> Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol snd_iprintf
> Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
> snd_pcm_lib_malloc_pages
> Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
> snd_pcm_lib_ioctl
> Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
> snd_pcm_lib_free_pages
> Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
> snd_pcm_new_stream
> Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol snd_pcm_set_ops
> Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol snd_device_new
> Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
> snd_card_disconnect
> Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
> snd_pcm_lib_preallocate_pages
> Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
> snd_card_free_in_thread
> Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
> snd_pcm_lib_preallocate_free_for_all
> Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
> snd_pcm_period_elapsed
> Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
> snd_pcm_format_name
> Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
> snd_usbmidi_disconnect
> Aug 8 23:57:24 o kernel: usbcore: registered new driver snd-usb-audio
> Aug 8 23:57:24 o kernel: usbcore: registered new driver usblp
> Aug 8 23:57:24 o kernel: drivers/usb/class/usblp.c: v0.13: USB Printer
> Device Class driver
> Aug 8 23:57:24 o kernel: EXT3 FS on hda1, internal journal
> Aug 8 23:57:24 o kernel: ACPI: PCI interrupt 0000:00:0f.0[A] -> GSI 18
> (level, low) -> IRQ 18
> Aug 8 23:57:24 o kernel: Adding 2064312k swap on /dev/hda5.
> Priority:-1 extents:1
> Aug 8 23:57:24 o kernel: Linux agpgart interface v0.100 (c) Dave Jones
> Aug 8 23:57:24 o kernel: nvidia: module license 'NVIDIA' taints kernel.
> Aug 8 23:57:24 o kernel: ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16
> (level, low) -> IRQ 16
> Aug 8 23:57:24 o kernel: NVRM: loading NVIDIA Linux x86 NVIDIA Kernel
> Module 1.0-7174 Tue Mar 22 06:44:39 PST 2005
> Aug 8 23:57:24 o kernel: bttv: driver version 0.9.15 loaded
> Aug 8 23:57:24 o kernel: bttv: using 8 buffers with 2080k (520 pages)
> each for capture
> Aug 8 23:57:24 o kernel: bttv: Bt8xx card found (0).
> Aug 8 23:57:24 o kernel: ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 16
> (level, low) -> IRQ 16
> Aug 8 23:57:24 o kernel: bttv0: Bt878 (rev 17) at 0000:00:0d.0, irq:
> 16, latency: 32, mmio: 0xed000000
> Aug 8 23:57:24 o kernel: bttv0: using: Prolink Pixelview PV-BT878P+9B
> (PlayTV Pro rev.9B FM+NICAM) [card=72,insmod option]
> Aug 8 23:57:24 o kernel: bttv0: gpio: en=00000000, out=00000000
> in=00ffc0ff [init]
> Aug 8 23:57:24 o kernel: bttv0: using tuner=28
> Aug 8 23:57:24 o kernel: bttv0: i2c: checking for TDA7432 @ 0x8a... not
> found
> Aug 8 23:57:24 o kernel: tvaudio: TV audio decoder + audio/video mux
> driver
> Aug 8 23:57:24 o kernel: tvaudio: known chips:
> tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6320,tea6420,tda8425
> ,pic16c54 (PV951),ta8874z
> Aug 8 23:57:24 o kernel: bttv0: i2c: checking for TDA9887 @ 0x86... not
> found
> Aug 8 23:57:25 o kernel: tuner 0-0061: chip found @ 0xc2 (bt878 #0
> [sw])
> Aug 8 23:57:25 o kernel: tuner 0-0061: type set to 28 (LG PAL_BG+FM
> (TPI8PSB01D))
> Aug 8 23:57:25 o kernel: bttv0: registered device video2
> Aug 8 23:57:25 o kernel: bttv0: registered device vbi0
> Aug 8 23:57:25 o kernel: bttv0: registered device radio0
> Aug 8 23:57:25 o kernel: bttv0: PLL: 28636363 => 35468950 .. ok
> Aug 8 23:57:25 o kernel: bttv0: add subdevice "remote0"
> Aug 8 23:57:25 o kernel: bt878: AUDIO driver version 0.0.0 loaded
> Aug 8 23:57:25 o kernel: bt878: Bt878 AUDIO function found (0).
> Aug 8 23:57:25 o kernel: ACPI: PCI interrupt 0000:00:0d.1[A] -> GSI 16
> (level, low) -> IRQ 16
> Aug 8 23:57:25 o kernel: bt878(0): Bt878 (rev 17) at 00:0d.1, irq: 16,
> latency: 32, memory: 0xec800000
> Aug 8 23:57:25 o kernel: agpgart: Detected VIA KT266/KY266x/KT333
> chipset
> Aug 8 23:57:25 o kernel: agpgart: Maximum main memory to use for agp
> memory: 1185M
> Aug 8 23:57:25 o kernel: agpgart: AGP aperture is 128M @ 0xf0000000
> Aug 8 23:57:25 o kernel: kjournald starting. Commit interval 5 seconds
> Aug 8 23:57:25 o kernel: EXT3 FS on hdb1, internal journal
> Aug 8 23:57:25 o kernel: EXT3-fs: mounted filesystem with ordered data
> mode.
> Aug 8 23:57:25 o kernel: loop: loaded (max 8 devices)
> Aug 8 23:57:25 o kernel: SCSI subsystem initialized
> Aug 8 23:57:25 o kernel: st: Version 20041025, fixed bufsize 32768, s/g
> segs 256
> Aug 8 23:57:25 o kernel: ieee1394: Initialized config rom entry
> `ip1394'
> Aug 8 23:57:25 o kernel: ohci1394: $Rev: 1223 $ Ben Collins
> <bcollins@debian.org>
> Aug 8 23:57:25 o kernel: ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 17
> (level, low) -> IRQ 17
> Aug 8 23:57:25 o kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI):
> IRQ=[17] MMIO=[ea800000-ea8007ff] Max Packet=[2048]
> Aug 8 23:57:25 o kernel: hdc: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB
> Cache, UDMA(33)
> Aug 8 23:57:25 o kernel: Uniform CD-ROM driver Revision: 3.20
> Aug 8 23:57:26 o kernel: 8139too Fast Ethernet driver 0.9.27
> Aug 8 23:57:26 o kernel: ACPI: PCI interrupt 0000:00:0e.0[A] -> GSI 17
> (level, low) -> IRQ 17
> Aug 8 23:57:26 o kernel: eth0: RealTek RTL8139 at 0xf8c40000,
> 00:e0:4c:08:ae:17, IRQ 17
> Aug 8 23:57:26 o kernel: eth0: Identified 8139 chip type
> 'RTL-8100B/8139D'
> Aug 8 23:57:26 o kernel: ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 19
> (level, low) -> IRQ 19
> Aug 8 23:57:26 o kernel: eth1: RealTek RTL8139 at 0xf8c42000,
> 00:50:fc:c7:eb:2b, IRQ 19
> Aug 8 23:57:26 o kernel: eth1: Identified 8139 chip type
> 'RTL-8100B/8139D'
> Aug 8 23:57:26 o kernel: ide-floppy driver 0.99.newide
> Aug 8 23:57:26 o kernel: eth1394: $Rev: 1224 $ Ben Collins
> <bcollins@debian.org>
> Aug 8 23:57:26 o kernel: eth1394: eth2: IEEE-1394 IPv4 over 1394
> Ethernet (fw-host0)
> Aug 8 23:57:26 o kernel: ieee1394: Host added: ID:BUS[0-00:1023]
> GUID[00e018000004199b]
> Aug 8 23:57:26 o kernel: ip_conntrack version 2.1 (8192 buckets, 65536
> max) - 248 bytes per conntrack
> Aug 8 23:57:26 o kernel: ip_tables: (C) 2000-2002 Netfilter core team
> Aug 8 23:57:26 o kernel: Floppy drive(s): fd0 is 1.44M
> Aug 8 23:57:26 o kernel: FDC 0 is a post-1991 82077
> Aug 8 23:57:26 o kernel: NET: Registered protocol family 23
> Aug 8 23:57:26 o kernel: IrCOMM protocol (Dag Brattli)
> Aug 8 23:57:26 o kernel: [eagle-usb] driver V2.2.0 loaded
> Aug 8 23:57:26 o kernel: [eagle-usb] New USB ADSL device detected,
> waiting for DSP code...
> Aug 8 23:57:26 o kernel: [eagle-usb] Interface 0 accepted.
> Aug 8 23:57:26 o kernel: [eagle-usb] created proc entry
> at : /proc/driver/eagle-usb/004-002
> Aug 8 23:57:26 o kernel: usbcore: registered new driver eagle-usb
> Aug 8 23:57:26 o kernel: eth0: link down
> Aug 8 23:57:26 o kernel: eth0: link down
> Aug 8 23:57:26 o kernel: NET: Registered protocol family 17
> Aug 8 23:57:26 o kernel: eth0: link down
> Aug 8 23:57:26 o kernel: eth1: link up, 100Mbps, full-duplex, lpa
> 0x41E1
> Aug 8 23:57:26 o kernel: CSLIP: code copyright 1989 Regents of the
> University of California
> Aug 8 23:57:26 o kernel: PPP generic driver version 2.4.2
> Aug 8 23:57:26 o kernel: NET: Registered protocol family 10
> Aug 8 23:57:26 o kernel: Disabled Privacy Extensions on device
> c0416140(lo)
> Aug 8 23:57:26 o kernel: IPv6 over IPv4 tunneling driver
> Aug 8 23:57:26 o kernel: eth1: no IPv6 routers present
> Aug 8 23:57:26 o kernel: eth0: no IPv6 routers present
> Aug 8 23:57:26 o kernel: ip_tables: (C) 2000-2002 Netfilter core team
> Aug 8 23:57:26 o kernel: ip_conntrack version 2.1 (8192 buckets, 65536
> max) - 248 bytes per conntrack
> Aug 8 23:57:27 o kernel: ip6_tables: (C) 2000-2002 Netfilter core team
> Aug 8 23:57:27 o hal.hotplug[6694]: DEVPATH is not set
>
> Aug 8 23:57:27 o kernel: input: PC Speaker
> Aug 8 23:57:28 o kernel: cpu5wdt: init success
> Aug 8 23:57:29 o kernel: usbcore: deregistering driver snd-usb-audio
> Aug 8 23:57:30 o dhclient: DHCPDISCOVER on eth2 to 255.255.255.255 port
> 67 interval 12
> Aug 8 23:57:31 o devfsd[1032]: error copying: "/lib/dev-state/vcc/2" to
> "/dev/vcc/2"
> Aug 8 23:57:31 o devfsd[1032]: error copying: "/lib/dev-state/vcc/3" to
> "/dev/vcc/3"
> Aug 8 23:57:31 o devfsd[1032]: error copying: "/lib/dev-state/vcc/2" to
> "/dev/vcc/2"
> Aug 8 23:57:31 o devfsd[1032]: error copying: "/lib/dev-state/vcc/3" to
> "/dev/vcc/3"
> Aug 8 23:57:34 o kernel: ACPI: PCI interrupt 0000:00:0f.0[A] -> GSI 18
> (level, low) -> IRQ 18
> Aug 8 23:57:34 o alsa: succeeded
> Aug 8 23:57:35 o login(pam_unix)[6928]: session opened for user root by
> (uid=0)
> Aug 8 23:57:35 o -- root[6928]: ROOT LOGIN ON vc/1
> Aug 8 23:57:39 o kernel: usbcore: registered new driver snd-usb-audio
> Aug 8 23:57:40 o login(pam_unix)[6933]: session opened for user
> michalkr by (uid=0)
> Aug 8 23:57:41 o pam_console.dev[8235]: Restoring console permissions
> for /dev/mixer2
> Aug 8 23:57:42 o dhclient: DHCPDISCOVER on eth2 to 255.255.255.255 port
> 67 interval 15
> Aug 8 23:57:46 o pam_console.dev[8441]: Restoring console permissions
> for /dev/mixer
> Aug 8 23:57:46 o -- michalkr[6933]: LOGIN ON vc/6 BY michalkr
> Aug 8 23:57:46 o motion: Processing thread 0 - config
> file /usr/local/etc/motion.conf
> Aug 8 23:57:46 o motion: Unknown config option: "mpeg_encode"
> Aug 8 23:57:46 o motion: Unknown config option: "mpeg_encode_bin"
> Aug 8 23:57:46 o motion: Unknown config option: "adjust_rate"
> Aug 8 23:57:46 o motion: Unknown config option: "jpg_cleanup"
> Aug 8 23:57:46 o motion: Unknown config option:
> "berkeley_single_directory"
> Aug 8 23:57:46 o motion: Unknown config option: "predict_filename"
> Aug 8 23:57:46 o motion: Unknown config option: "sql_log_image"
> Aug 8 23:57:46 o motion: Unknown config option: "sql_log_snapshot"
> Aug 8 23:57:46 o motion: Unknown config option: "sql_log_mpeg"
> Aug 8 23:57:46 o motion: Unknown config option: "sql_log_timelapse"
> Aug 8 23:57:46 o motion: Unknown config option: "sql_log_prediction"
> Aug 8 23:57:46 o motion: Unknown config option: "pgsql_port"
> Aug 8 23:57:46 o motion: Unknown config option: "predict_enable"
> Aug 8 23:57:47 o motion: Unknown config option: "predict_threshold"
> Aug 8 23:57:47 o motion: motion running as daemon process
> Aug 8 23:57:47 o motion: waiting for threads to finish, pid: 8508
> Aug 8 23:57:47 o motion: Thread 0 PID: 8508
> Aug 8 23:57:47 o kernel: pwc Failed to set LED on/off time.
> Aug 8 23:57:47 o kernel: pwc set_video_mode(640x480 @ 5, palette 15).
> Aug 8 23:57:47 o kernel: pwc decode_size = 5.
> Aug 8 23:57:47 o kernel: pwc Using alternate setting 6.
> Aug 8 23:57:47 o kernel: [eagle-usb] ioctl EU_IO_CMVS received and
> treated.
> Aug 8 23:57:47 o kernel: [eagle-usb] ioctl EU_IO_OPTIONS received
> Aug 8 23:57:47 o kernel: [eagle-usb] ioctl EU_IO_DSP received
> Aug 8 23:57:47 o kernel: [eagle-usb] Loading DSP code to device...
> Aug 8 23:57:47 o kernel: [eagle-usb] DSP code successfully loaded to
> device
> Aug 8 23:57:48 o pam_console.dev[8541]: Restoring console permissions
> for /dev/vcs10
> Aug 8 23:57:48 o pam_console.dev[8547]: Restoring console permissions
> for /dev/vcsa10
> Aug 8 23:57:50 o kernel: pwc Dumping frame 6.
> Aug 8 23:57:50 o kernel: agpgart: Found an AGP 2.0 compliant device at
> 0000:00:00.0.
> Aug 8 23:57:50 o kernel: agpgart: Putting AGP V2 device at 0000:00:00.0
> into 4x mode
> Aug 8 23:57:50 o kernel: agpgart: Putting AGP V2 device at 0000:01:00.0
> into 4x mode
> Aug 8 23:57:50 o kernel: pwc Dumping frame 7.
> Aug 8 23:57:50 o kernel: pwc Dumping frame 9.
> Aug 8 23:57:50 o kernel: agpgart: Found an AGP 2.0 compliant device at
> 0000:00:00.0.
> Aug 8 23:57:50 o kernel: agpgart: Putting AGP V2 device at 0000:00:00.0
> into 4x mode
> Aug 8 23:57:50 o kernel: agpgart: Putting AGP V2 device at 0000:01:00.0
> into 4x mode
> Aug 8 23:57:51 o kernel: pwc Dumping frame 11.
> Aug 8 23:57:51 o kernel: pwc Dumping frame 13.
> Aug 8 23:57:52 o kernel: pwc Dumping frame 16.
> Aug 8 23:57:52 o kernel: pwc Dumping frame 18.
> Aug 8 23:57:53 o kernel: pwc Dumping frame 21.
> Aug 8 23:57:53 o kernel: pwc Dumping frame 23.
> Aug 8 23:57:54 o kernel: pwc Dumping frame 26.
> Aug 8 23:57:54 o kernel: pwc Dumping frame 28.
> Aug 8 23:57:54 o kernel: pwc Dumping frame 30.
> Aug 8 23:57:55 o kernel: pwc Dumping frame 33.
> Aug 8 23:57:55 o kernel: pwc Dumping frame 35.
> Aug 8 23:57:56 o kernel: pwc Dumping frame 38.
> Aug 8 23:57:56 o kernel: pwc Dumping frame 40.
> Aug 8 23:57:57 o dhclient: DHCPDISCOVER on eth2 to 255.255.255.255 port
> 67 interval 2
> Aug 8 23:57:57 o kernel: pwc Dumping frame 42.
> Aug 8 23:57:57 o kernel: pwc Dumping frame 43.
> Aug 8 23:57:57 o kernel: pwc Dumping frame 44.
> Aug 8 23:57:58 o kernel: pwc Dumping frame 46 (last message).
> Aug 8 23:57:59 o dhclient: No DHCPOFFERS received.
> Aug 8 23:58:00 o kernel: zcip uses obsolete (PF_INET,SOCK_PACKET)
> Aug 8 23:58:00 o zcip[8577]: libnet_open_link_interface("eth2"):
> unknown physical layer type 0x18
> Aug 8 23:58:00 o ifplugd(eth2)[5369]: client: Determining IP
> information for eth2... failed.
> Aug 8 23:58:00 o ifplugd(eth2)[5369]: Program execution failed, return
> value is 1.
> Aug 8 23:58:00 o ifplugd(eth2)[5369]: Exiting.
> Aug 8 23:58:04 o kernel: [eagle-usb] Modem operational !!
> Aug 8 23:58:04 o kernel: [eagle-usb] Ethernet device eth3 created.
> Aug 8 23:58:06 o postfix/postfix-script: refreshing the Postfix mail
> system
> Aug 8 23:58:06 o postfix/master[6062]: reload configuration
> Aug 8 23:58:14 o kernel: eth3: no IPv6 routers present
> Aug 8 23:58:22 o pppd[8679]: pppd 2.4.3 started by root, uid 0
> Aug 8 23:58:22 o pppd[8679]: using channel 1
> Aug 8 23:58:22 o pppd[8679]: Using interface ppp0
> Aug 8 23:58:22 o pppd[8679]: Connect: ppp0 <--> /dev/pts/0
> Aug 8 23:58:23 o pppd[8679]: sent [LCP ConfReq id=0x1 <mru 1492> <magic
> 0xbd1ae510>]
> Aug 8 23:58:25 o pppd[8679]: rcvd [LCP ConfReq id=0x3e <auth chap MD5>
> <magic 0x6d4ee261>]
> Aug 8 23:58:25 o pppd[8679]: sent [LCP ConfAck id=0x3e <auth chap MD5>
> <magic 0x6d4ee261>]
> Aug 8 23:58:26 o pppd[8679]: sent [LCP ConfReq id=0x1 <mru 1492> <magic
> 0xbd1ae510>]
> Aug 8 23:58:26 o pppd[8679]: rcvd [LCP ConfAck id=0x1 <mru 1492> <magic
> 0xbd1ae510>]
> Aug 8 23:58:26 o pppd[8679]: rcvd [CHAP Challenge id=0x8d
> <74092edeac109ef714f8f867905772a515274f12be>, name = "kat_ru1"]
> Aug 8 23:58:26 o pppd[8679]: sent [CHAP Response id=0x8d
> <0a44b75013fc6d851d1f081a27942425>, name = "CENZO@RED"
> ]
> Aug 8 23:58:27 o pppd[8679]: rcvd [CHAP Success id=0x8d ""]
> Aug 8 23:58:27 o pppd[8679]: CHAP authentication succeeded
> Aug 8 23:58:27 o pppd[8679]: sent [IPCP ConfReq id=0x1 <addr 0.0.0.0>
> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
> Aug 8 23:58:27 o pppd[8679]: rcvd [IPCP ConfNak id=0x1 <addr
> 83.30.51.80> <ms-dns1 194.204.152.34> <ms-dns3 217.98.63.164>
> ]
> Aug 8 23:58:27 o pppd[8679]: sent [IPCP ConfReq id=0x2 <addr
> 83.30.51.80> <ms-dns1 194.204.152.34> <ms-dns3 217.98.63.164>
> ]
> Aug 8 23:58:27 o pppd[8679]: rcvd [IPCP ConfReq id=0x2 <addr
> 213.25.2.205>]
> Aug 8 23:58:27 o pppd[8679]: sent [IPCP ConfAck id=0x2 <addr
> 213.25.2.205>]
> Aug 8 23:58:27 o pppd[8679]: rcvd [IPCP ConfAck id=0x2 <addr
> 83.30.51.80> <ms-dns1 194.204.152.34> <ms-dns3 217.98.63.164>
> ]
> Aug 8 23:58:27 o pppd[8679]: local IP address 83.30.51.80
> Aug 8 23:58:27 o pppd[8679]: remote IP address 213.25.2.205
> Aug 8 23:58:27 o pppd[8679]: primary DNS address 194.204.152.34
> Aug 8 23:58:27 o pppd[8679]: secondary DNS address 217.98.63.164
> Aug 8 23:58:27 o pppd[8747]: Script /etc/ppp/ip-up started (pid 8749)
> Aug 8 23:58:27 o postfix/postfix-script: refreshing the Postfix mail
> system
> Aug 8 23:58:28 o postfix/master[6062]: reload configuration
> Aug 8 23:58:28 o crond[8796]: (CRON) STARTUP (fork ok)
> Aug 8 23:58:28 o crond: Uruchamianie crond succeeded
> Aug 8 23:58:28 o postfix/postfix-script: refreshing the Postfix mail
> system
> Aug 8 23:58:28 o postfix/master[6062]: reload configuration
> Aug 8 23:58:28 o pppd[8747]: Script /etc/ppp/ip-up finished (pid 8749),
> status = 0x0
> Aug 8 23:58:39 o kernel: tuner 0-0061: radio freq (0.00) out of range
> (65-108)
>
> Aug 8 23:59:00 o CROND[9091]:.................... that's all i think
>
>
>
> It is a kernel-source-2.6-2.6.11-12mdk.i586.rpm compiled by myself
> for "athlon/duron/k7" and NVIDIA-Linux-x86-1.0-7174-pkg1 compiled too
> by myself.
>
> Linux o 2.6.11-12mdkcustom #2 Sat Aug 6 11:02:20 CEST 2005 i686 AMD
> Duron(TM)unknown GNU/Linux
>
>
> Ps. i should compile 2.6.13-rc6, but ATM i have no time, so, i did quick
> fix
> #> rmmod bt878
> #> rmmod bttv
> #> rmmod btcx-risc
> and i'm waiting for crash.
>
>
>
>
>
>
>
>
Cheers, Mauro.
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2005-08-09 20:26 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <4zEQ3-7Le-21@gated-at.bofh.it>
2005-08-09 18:44 ` my kernel sometimes did a crash, but no panic Bodo Eggert
2005-08-09 19:05 ` Michael Krufky
2005-08-09 20:14 klasyk99
-- strict thread matches above, loose matches on Subject: below --
2005-08-09 16:04 Klasyk
2005-08-09 19:18 ` Mauro Carvalho Chehab
[not found] ` <1123618340.2484.9.camel@KKK>
2005-08-09 20:26 ` Mauro Carvalho Chehab
2005-08-09 20:21 ` Adrian Bunk
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox