From: Tejun Heo <htejun@gmail.com>
To: Shaun Jackman <sjackman@gmail.com>
Cc: lkml <linux-kernel@vger.kernel.org>
Subject: Re: Trouble shooting a ten minute boot delay (SiI3112)
Date: Fri, 12 Aug 2005 11:47:48 +0900 [thread overview]
Message-ID: <42FC0DD4.9060905@gmail.com> (raw)
In-Reply-To: <7f45d939050809163136a234a@mail.gmail.com>
Shaun Jackman wrote:
> I added a PCI SATA controller to my computer. Immediately after grub
> loads the kernel there is a consistent ten minute delay before the
> kernel displays its first message. I tested Linux 2.6.8 and 2.6.11
> both from Debian, and 2.6.11 from Knoppix, all of which experience the
> same delay.
>
> The SATA controller is connected to two 200 GB Seagate SATA
> ST3200826AS drives. I managed to install Debian on the system, though
> the install was perilous, and once booted the system runs wonderfully!
> Any suggestions on how I can trouble shoot the ten minute boot delay?
> I don't reboot frequently, but it is irksome.
>
> What's the appropriate mailing list for SATA questions, perhaps
> linux-ide or linux-scsi?
>
> Please cc me in your reply. Thanks!
> Shaun
>
Hi, Shaun Jackman.
The list would be linux-ide but it doesn't really seem like a SATA
problem.
* What do you mean by the `first' message? ie. What's the first line
you read?
* Is it really ten minutes?
--
tejun
next prev parent reply other threads:[~2005-08-12 2:47 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-08-09 23:31 Trouble shooting a ten minute boot delay (SiI3112) Shaun Jackman
2005-08-12 2:47 ` Tejun Heo [this message]
2005-08-12 8:00 ` Shaun Jackman
2005-08-12 8:03 ` Jeff Garzik
2005-08-12 17:44 ` Shaun Jackman
2005-08-12 18:39 ` Jan Engelhardt
2005-08-12 19:08 ` Shaun Jackman
2005-08-12 19:14 ` Jan Engelhardt
2005-08-13 1:39 ` Shaun Jackman
2005-08-13 2:55 ` Steven Rostedt
2005-08-15 22:34 ` Shaun Jackman
-- strict thread matches above, loose matches on Subject: below --
2005-08-16 12:37 Etienne Lorrain
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=42FC0DD4.9060905@gmail.com \
--to=htejun@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sjackman@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox