Re: Serial driver (serial_core.c) status messages should be set to KERN_INFO

[Jiri Slaby <jirislaby@gmail.com>]

Alon Bar-Lev napsal(a):

> Hello,
>
>
> When upgrading to 2.6.13 I've noticed that serial driver reports it 
> status with unknown severity, causing the boot-splash to be overridden.
>
>
> Please consider this modification.
>
>
> Best Regards,
>
> Alon Bar-Lev.
>
>
> At drivers/serial/serial_core.c
>
>
> static inline void
>
> uart_report_port(struct uart_driver *drv, struct uart_port *port)
> {
> -        printk("%s%d", drv->dev_name, port->line);
> +      printk(KERN_INFO + "%s%d", drv->dev_name, port->line);

plus sign between that?

>
>         printk(" at ");

why the fellows didn't put this to the line above?

>         switch (port->iotype) {
>         case UPIO_PORT:
>                 printk("I/O 0x%x", port->iobase);

And what about these?

>                 break;
>         case UPIO_HUB6:
>                 printk("I/O 0x%x offset 0x%x", port->iobase, port->hub6);
>                 break;
>         case UPIO_MEM:
>         case UPIO_MEM32:
>                 printk("MMIO 0x%lx", port->mapbase);
>                 break;
>         }
>         printk(" (irq = %d) is a %s\n", port->irq, uart_type(port));
> }

regards,

-- 
Jiri Slaby         www.fi.muni.cz/~xslaby
~\-/~      jirislaby@gmail.com      ~\-/~
241B347EC88228DE51EE A49C4A73A25004CB2A10