From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751193AbVICOJF (ORCPT ); Sat, 3 Sep 2005 10:09:05 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751456AbVICOJE (ORCPT ); Sat, 3 Sep 2005 10:09:04 -0400 Received: from mail.tor.primus.ca ([216.254.136.21]:54422 "EHLO smtp-01.primus.ca") by vger.kernel.org with ESMTP id S1751193AbVICOJD (ORCPT ); Sat, 3 Sep 2005 10:09:03 -0400 Message-ID: <4319AE7B.3010304@dtbb.net> Date: Sat, 03 Sep 2005 07:08:59 -0700 From: Tyler User-Agent: Mozilla Thunderbird 1.0.6 (Windows/20050716) X-Accept-Language: en-us, en MIME-Version: 1.0 To: Brett Russ CC: Jeff Garzik , linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH 2.6.13] libata: Marvell SATA support (PIO mode) References: <20050830183625.BEE1520F4C@lns1058.lss.emc.com> <4314C604.4030208@pobox.com> <20050901142754.B93BF27137@lns1058.lss.emc.com> In-Reply-To: <20050901142754.B93BF27137@lns1058.lss.emc.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Brett Russ wrote: >Some (non-functional) cleanup modifications since the version 0.10 >driver I sent out 2005-08-30. Also adding signed-off-by for Jeff's >upstream push. This is my libata compatible low level driver for >the Marvell SATA family. Currently it successfully runs in PIO mode >on a 6081 chip. EDMA support is in the works and should be done >shortly. Review, testing (especially on other flavors of Marvell), >comments welcome. > >Thank you, >BR > >Signed-off-by: Brett Russ > > > [snip..] Please find attached patches that add the Adaptec 1420SA controller to the PCI ID list in the driver, and a small note in the kernel config option to state so. This is untested as of currently, if anyone has a 1420SA to try, that would be great.. The one I had access to is now gone to a remote location out of reach for testing. I read in one post I found with google, that the 1420SA uses a 6541 chip instead of a 6041, but I am not able to verify this, and also don't know if it may still work as a 6041. The card is still a Sata2, PCI-X card, with 4 ports, the same as the 6041 based cards. This patch may or may not be useful.. The card comes with a manufacturer ID of 9005 according to a linux PCI-ID list, which is a secondary id of Adaptec's known as ADAPTEC2, and an actual PCI Id of 0241. Signed-off-by: Tyler Guthrie --- linux-2.6.13.orig/drivers/scsi/Kconfig 2005-09-03 06:42:20.000000000 -0700 +++ linux-2.6.13drivers/scsi/Kconfig 2005-09-03 06:44:29.000000000 -0700 @@ -466,6 +466,8 @@ This option enables support for the Marvell Serial ATA family. Currently supports 88SX[56]0[48][01] chips. + Also Including Adaptec 1420SA Card (using marvell chip pci-id 0x0241). + If unsure, say N. config SCSI_SATA_NV --- linux-2.6.13.orig/drivers/scsi/sata_mv.c 2005-09-03 06:40:07.000000000 -0700 +++ linux-2.6.13/drivers/scsi/sata_mv.c 2005-09-03 06:39:47.000000000 -0700 @@ -286,6 +286,7 @@ {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6041), 0, 0, chip_604x}, {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6080), 0, 0, chip_608x}, {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6081), 0, 0, chip_608x}, + {PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, 0x0241), 0, 0, chip_604x}, {} /* terminate list */ }; Tyler.