Re: snd-emu10k1 broken in 2.6.13

dragoran
2005-09-04T10:37:22Z

James Courtier-Dutton wrote:

> dragoran wrote:
>
>> Niko Nitsche wrote:
>>
>>> dragoran wrote:
>>>
>>>
>>>> Hello.
>>>> I am running FC4 and compiled a vanilla linux 2.6.13.
>>>> After booting the kernel I see an error messages that says that it was
>>>> unable to load snd-emu10k1 (see dmesg).
>>>> In dmesg I got this:
>>>> Sep 4 10:09:47 chello062178124144 kernel: snd_emu10k1: Unknown
>>>> parameter `'
>>>> Sep 4 10:09:47 chello062178124144 last message repeated 2 times
>>>> the same modprobe.conf works in 2.6.12.
>>>> I tryed to load it by hand (modprobe snd-emu10k1) => same result
>>>> modprobe snd-emu10k1 index=0 => same result.
>>>> I will attach my .config file
>>>> (please CC me as I am not subscribed to the list)
>>>
>>>
>>>
>>> Hi,
>>>
>>> I had the same problem with FC4/vanilla 2.6.13 and snd-intel8x0
>>> and I had two lines in modprobe.conf like this:
>>>
>>> options snd-card-0 index=0
>>> options snd-intel8x0 index=0
>>>
>>> I removed them and now everything works just fine. Accutally I had the
>>> Unknown parameter `' messages before but the module loaded.
>>>
>>>
>>>
>>>
>> sorry but this isn't solution (it works thought) but this happens for
>> all modules that have a options line in /etc/modprobe.conf
>> Is this a bug or has the syntax of modprobe.conf changed in 2.6.13?
>
>
> Well, those options lines are just wrong so I am not at all surprised
> that it failed.
>
> It should be:
> options snd-card-0 snd-intel8x0
> options snd-intel8x0 index=0
>
> So, dragoran, what options lines do you have?
>
> James
>
>
this is my modprobe.conf:
alias eth0 forcedeth
alias eth1 r8169
alias scsi_hostadapter sata_nv
alias snd-card-0 snd-emu10k1
options snd-card-0 index=0
options snd-emu10k1 index=0
remove snd-emu10k1 { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ; };
/sbin/modprobe -r --ignore-remove snd-emu10k1
alias usb-controller ehci-hcd
alias usb-controller1 ohci-hcd
alias ieee1394-controller ohci1394
alias char-major-81 saa7134
options nvidia NVreg_EnableAGPFW=1