From: Parag Warudkar <kernel-stuff@comcast.net>
To: Andi Kleen <ak@suse.de>
Cc: linux-kernel@vger.kernel.org, akpm@osdl.org
Subject: Re: 2.6.13-mm1 X86_64: All 32bit programs segfault
Date: Thu, 08 Sep 2005 01:10:50 -0400 [thread overview]
Message-ID: <431FC7DA.6090309@comcast.net> (raw)
In-Reply-To: <200509080600.39368.ak@suse.de>
Andi Kleen wrote:
>Hmm - not many x86-64 patches in mm1. 2.6.13 definitely works.
>
>
2.6.13-git7 works. So something in -mm has gone bad (if not x86_64, may
be i386 or arch-independent changes?)
It seems it has got something to do with the sys_set_tid_address as
evident from the strace output below.
Another thing - If I set LD_ASSUME_KERNEL=2.4 and then run the binary,
it works fine.
> Last lines of strace -f + the kernel message from dmesg might be useful.
dmesg
--------------------
Sep 7 00:14:23 localhost kernel: mozilla-xremote[4492]: segfault at
00000000000002e8 rip 0000000000c40471 rsp 00000000ffffd334 error 4
Sep 7 00:14:24 localhost kernel: thunderbird-bin[4500]: segfault at
00000000000002e8 rip 0000000000c40471 rsp 00000000ffffcfe4 error 4
Sep 7 00:15:02 localhost kernel: mozilla-xremote[4518]: segfault at
00000000000002e8 rip 0000000000c40471 rsp 00000000ffffce84 error 4 Sep
7 00:15:02 localhost kernel: thunderbird-bin[4526]: segfault at
00000000000002e8 rip 0000000000c40471 rsp 00000000ffffbbe4 error 4
strace -f ./thunderbird
---------------------------
[pid 2888] fstat64(0x3, 0xffffb25c) = 0
[pid 2888] old_mmap(0x12c8c00c7d000, 8804682956805,
PROT_READ|PROT_WRITE, 0xc /* MAP_???
*/|MAP_FIXED|MAP_ANONYMOUS|MAP_POPULATE|MAP_NONBLOCK|MAP_GROWSDOWN|MAP_EXECUTABLE|MAP_LOCKED|0xfffe0000,
1, 0xb071e0ffffb14c) = 0xc7d000
[pid 2888] old_mmap(0x100000c8f000, 8873402433539,
PROT_READ|PROT_WRITE, 0xc /* MAP_???
*/|MAP_FIXED|MAP_ANONYMOUS|MAP_POPULATE|MAP_NONBLOCK|MAP_GROWSDOWN|MAP_EXECUTABLE|MAP_LOCKED|0xfffe0000,
1, 0xb071e0ffffb14c) = 0xc8f000
[pid 2888] close(3) = 0
[pid 2888] old_mmap(0x100000000000, 146028888067,
PROT_READ|PROT_WRITE|PROT_EXEC|PROT_GROWSDOWN|PROT_GROWSUP|0xfcfffff8,
0x4 /* MAP_???
*/|MAP_FIXED|MAP_ANONYMOUS|MAP_NORESERVE|MAP_POPULATE|MAP_GROWSDOWN|MAP_DENYWRITE|MAP_EXECUTABLE|0xb00680,
48, 0x800b071e0) = 0x5599e000
[pid 2888] old_mmap(0x100000000000, 146028888067,
PROT_READ|PROT_WRITE|PROT_EXEC|PROT_GROWSDOWN|PROT_GROWSUP|0xfcfffff8,
0x4 /* MAP_???
*/|MAP_FIXED|MAP_ANONYMOUS|MAP_NORESERVE|MAP_POPULATE|MAP_GROWSDOWN|MAP_DENYWRITE|MAP_EXECUTABLE|0xb00680,
19, 0x800b071e0) = 0x5599f000
[pid 2888] old_mmap(0x100000000000, 146028888067,
PROT_READ|PROT_WRITE|PROT_EXEC|PROT_GROWSDOWN|PROT_GROWSUP|0xfcfffff8,
0x4 /* MAP_???
*/|MAP_FIXED|MAP_ANONYMOUS|MAP_NORESERVE|MAP_POPULATE|MAP_GROWSDOWN|MAP_DENYWRITE|MAP_EXECUTABLE|0xb00680,
2832, 0x2000b033df) = 0x559a0000
[pid 2888] set_thread_area(0xffffce20) = 0
[pid 2888] mprotect(0xc34000, 8192, PROT_READ) = 0
[pid 2888] mprotect(0xc73000, 4096, PROT_READ) = 0
[pid 2888] mprotect(0xc4a000, 4096, PROT_READ) = 0
[pid 2888] mprotect(0xc79000, 4096, PROT_READ) = 0
[pid 2888] mprotect(0xb0d000, 4096, PROT_READ) = 0
[pid 2888] munmap(0x555d8000, 155672) = 0
[pid 2888] set_tid_address(0x559a0608) = 2888
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[pid 2888] --- SIGSEGV (Segmentation fault) @ 0 (0) ---
Process 2883 resumed
Process 2888 detached
[pid 2883] <... chroot resumed> ) = 2888
[ Process PID=2883 runs in 64 bit mode. ]
[pid 2883] fstat(2, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 1),
...}) = 0
[pid 2883] mmap(NULL, 4096, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2aaaada2d000
[pid 2883] open("/usr/share/locale/locale.alias", O_RDONLY) = 3
[pid 2883] fstat(3, {st_mode=S_IFREG|0644, st_size=2528, ...}) = 0
[pid 2883] mmap(NULL, 4096, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2aaaada2e000
[pid 2883] read(3, "# Locale name alias data base.\n#"..., 4096) = 2528
[pid 2883] read(3, "", 4096) = 0
[pid 2883] close(3) = 0
[pid 2883] munmap(0x2aaaada2e000, 4096) = 0
[pid 2883] open("/usr/share/locale/en_US.UTF-8/LC_MESSAGES/libc.mo",
O_RDONLY) = -1 ENOENT (No such file or directory)
[pid 2883] open("/usr/share/locale/en_US.utf8/LC_MESSAGES/libc.mo",
O_RDONLY) = -1 ENOENT (No such file or directory)
[pid 2883] open("/usr/share/locale/en_US/LC_MESSAGES/libc.mo",
O_RDONLY) = -1 ENOENT (No such file or directory)
[pid 2883] open("/usr/share/locale/en.UTF-8/LC_MESSAGES/libc.mo",
O_RDONLY) = -1 ENOENT (No such file or directory)
[pid 2883] open("/usr/share/locale/en.utf8/LC_MESSAGES/libc.mo",
O_RDONLY) = -1 ENOENT (No such file or directory)
[pid 2883] open("/usr/share/locale/en/LC_MESSAGES/libc.mo", O_RDONLY) =
-1 ENOENT (No such file or directory)
[pid 2883] write(2, "./run-mozilla.sh: line 159: 288"...,
76./run-mozilla.sh: line 159: 2888 Segmentation fault "$prog"
${1+"$@"}
) = 76
[pid 2883] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid 2883] --- SIGCHLD (Child exited) @ 0 (0) ---
[pid 2883] wait4(-1, 0x7fffffe133d4, WNOHANG, NULL) = -1 ECHILD (No
child processes)
[pid 2883] rt_sigreturn(0xffffffffffffffff) = 0
[pid 2883] rt_sigaction(SIGINT, {SIG_DFL}, {0x4312b5, [], SA_RESTORER,
0x3116d2f330}, 8) = 0
[pid 2883] rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
[pid 2883] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid 2883] rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
[pid 2883] stat("core", 0x7fffffe138e0) = -1 ENOENT (No such file or
directory)[pid 2883] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid 2883] rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
[pid 2883] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid 2883] rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
[pid 2883] read(255, "\nexit $exitcode\n", 8192) = 16
[pid 2883] rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
[pid 2883] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid 2883] munmap(0x2aaaada2d000, 4096) = 0
[pid 2883] exit_group(139) = ?
Process 2870 resumed
Process 2883 detached
<... wait4 resumed> [{WIFEXITED(s) && WEXITSTATUS(s) == 139}], 0, NULL)
= 2883
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
--- SIGCHLD (Child exited) @ 0 (0) ---
wait4(-1, 0x7fffffbf54e4, WNOHANG, NULL) = -1 ECHILD (No child processes)
rt_sigreturn(0xffffffffffffffff) = 0
rt_sigaction(SIGINT, {SIG_DFL}, {0x4312b5, [], SA_RESTORER,
0x3116d2f330}, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
read(255, "exitcode=$?\n\n## Stop addon scrip"..., 6653) = 91
rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
open("/home/paragw/.thunderbird/init.d/",
O_RDONLY|O_NONBLOCK|O_DIRECTORY) = -1 ENOENT (No such file or directory)
open("./init.d/", O_RDONLY|O_NONBLOCK|O_DIRECTORY) = 3
fstat(3, {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
fcntl(3, F_SETFD, FD_CLOEXEC) = 0
getdents64(3, /* 3 entries */, 4096) = 80
getdents64(3, /* 0 entries */, 4096) = 0
close(3) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
access("/home/paragw/.thunderbird/init.d/K*", X_OK) = -1 ENOENT (No such
file or directory)
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
access("./init.d/K*", X_OK) = -1 ENOENT (No such file or
directory)
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
exit_group(139)
>-Andi
>
>
>
next prev parent reply other threads:[~2005-09-08 5:10 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-09-08 3:54 2.6.13-mm1 X86_64: All 32bit programs segfault Parag Warudkar
2005-09-08 4:00 ` Andi Kleen
2005-09-08 5:10 ` Parag Warudkar [this message]
2005-09-08 5:44 ` Andi Kleen
2005-09-08 13:08 ` Parag Warudkar
2005-09-08 8:44 ` Andrew Morton
2005-09-08 8:57 ` Andi Kleen
2005-09-08 12:57 ` Parag Warudkar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=431FC7DA.6090309@comcast.net \
--to=kernel-stuff@comcast.net \
--cc=ak@suse.de \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox