[PATCH 0/10] drivers/char: pci_find_device remove

[PATCH 0/10] drivers/char: pci_find_device remove

[Jiri Slaby]

Set of patches, which removes pci_find_device from drivers/char subtree.

 ip2main.c               |    8 +++++---
 istallion.c             |    9 +++++----
 mxser.c                 |    3 ++-
 rocket.c                |    2 +-
 specialix.c             |    9 ++++++---
 stallion.c              |    6 ++++--
 sx.c                    |    2 +-
 watchdog/alim1535_wdt.c |   12 +++++++++---
 watchdog/alim7101_wdt.c |    9 +++++++--
 watchdog/i8xx_tco.c     |    5 +++--
 10 files changed, 43 insertions(+), 22 deletions(-)

[PATCH 1/10] drivers/char: pci_find_device remove (drivers/char/ip2main.c)

[Jiri Slaby]

Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>

 ip2main.c |    8 +++++---
 1 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/char/ip2main.c b/drivers/char/ip2main.c
--- a/drivers/char/ip2main.c
+++ b/drivers/char/ip2main.c
@@ -442,6 +442,7 @@ cleanup_module(void)
 #ifdef CONFIG_PCI
 		if (ip2config.type[i] == PCI && ip2config.pci_dev[i]) {
 			pci_disable_device(ip2config.pci_dev[i]);
+			pci_dev_put(ip2config.pci_dev[i]);
 			ip2config.pci_dev[i] = NULL;
 		}
 #endif
@@ -594,9 +595,10 @@ ip2_loadmain(int *iop, int *irqp, unsign
 		case PCI:
 #ifdef CONFIG_PCI
 			{
-				struct pci_dev *pci_dev_i = NULL;
-				pci_dev_i = pci_find_device(PCI_VENDOR_ID_COMPUTONE,
-							  PCI_DEVICE_ID_COMPUTONE_IP2EX, pci_dev_i);
+				struct pci_dev *pci_dev_i;
+				pci_dev_i = pci_get_device(
+					PCI_VENDOR_ID_COMPUTONE,
+					PCI_DEVICE_ID_COMPUTONE_IP2EX, NULL);
 				if (pci_dev_i != NULL) {
 					unsigned int addr;
 

Re: [PATCH 1/10] drivers/char: pci_find_device remove (drivers/char/ip2main.c)

[Jiri Slaby]

Cc: mhw@wittsend.com [maintainer]

Jiri Slaby napsal(a):

>Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>
>
> ip2main.c |    8 +++++---
> 1 files changed, 5 insertions(+), 3 deletions(-)
>
>diff --git a/drivers/char/ip2main.c b/drivers/char/ip2main.c
>--- a/drivers/char/ip2main.c
>+++ b/drivers/char/ip2main.c
>@@ -442,6 +442,7 @@ cleanup_module(void)
> #ifdef CONFIG_PCI
> 		if (ip2config.type[i] == PCI && ip2config.pci_dev[i]) {
> 			pci_disable_device(ip2config.pci_dev[i]);
>+			pci_dev_put(ip2config.pci_dev[i]);
> 			ip2config.pci_dev[i] = NULL;
> 		}
> #endif
>@@ -594,9 +595,10 @@ ip2_loadmain(int *iop, int *irqp, unsign
> 		case PCI:
> #ifdef CONFIG_PCI
> 			{
>-				struct pci_dev *pci_dev_i = NULL;
>-				pci_dev_i = pci_find_device(PCI_VENDOR_ID_COMPUTONE,
>-							  PCI_DEVICE_ID_COMPUTONE_IP2EX, pci_dev_i);
>+				struct pci_dev *pci_dev_i;
>+				pci_dev_i = pci_get_device(
>+					PCI_VENDOR_ID_COMPUTONE,
>+					PCI_DEVICE_ID_COMPUTONE_IP2EX, NULL);
> 				if (pci_dev_i != NULL) {
> 					unsigned int addr;
> 
>  
>

Re: [PATCH 1/10] drivers/char: pci_find_device remove (drivers/char/ip2main.c)

[Jiri Slaby]

Jiri Slaby napsal(a):

> Cc: mhw@wittsend.com [maintainer]

Hello.

Is drivers/char/ip2main.c still maintained? Are you going to rewrite 
this driver to 2.6 API (PCI probing etc.)?

thanks,

-- 
Jiri Slaby         www.fi.muni.cz/~xslaby
~\-/~      jirislaby@gmail.com      ~\-/~
241B347EC88228DE51EE A49C4A73A25004CB2A10

Re: [PATCH 1/10] drivers/char: pci_find_device remove (drivers/char/ip2main.c)

[Jiri Slaby]

On 9/12/05, Jiri Slaby <jirislaby@gmail.com> wrote:
> Jiri Slaby napsal(a):
>
> > Cc: mhw@wittsend.com [maintainer]
>
> Hello.
>
> Is drivers/char/ip2main.c still maintained? Are you going to rewrite
> this driver to 2.6 API (PCI probing etc.)?
It seems, like it isn't, last chance to respond, otherwise the driver
becomes unmaintained (let's say on 12 Oct).

thanks,
--
Jiri Slaby         www.fi.muni.cz/~xslaby
~\-/~      jirislaby@gmail.com      ~\-/~
B67499670407CE62ACC8 22A032CC55C339D47A7E

(no subject)

[Jiri Slaby]

Maintainers one entry removed

Computone intelliport multiport card is no longer maintained. The
maintainer doesn't respond to e-mails (3 times during 1 month). The page was
updated 2 years ago and there is no other contact.

Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>

---
commit a6e455aea055d5c0bd9abd69fc0c40b41d76b993
tree 583e168ce727b57836064b2a0eb63326a1ef529e
parent ef1b647cf1a27b138123d31ab885b3e92cdbe4e9
author root <root@anemoi.(none)> Wed, 12 Oct 2005 18:33:10 +0200
committer root <root@anemoi.(none)> Wed, 12 Oct 2005 18:33:10 +0200

 MAINTAINERS |    6 ------
 1 files changed, 0 insertions(+), 6 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -580,12 +580,6 @@ M:	scott@spiteful.org
 L:	pcihpd-discuss@lists.sourceforge.net
 S:	Supported
 
-COMPUTONE INTELLIPORT MULTIPORT CARD
-P:	Michael H. Warfield
-M:	mhw@wittsend.com
-W:	http://www.wittsend.com/computone.html
-S:	Maintained
-
 COSA/SRP SYNC SERIAL DRIVER
 P:	Jan "Yenya" Kasprzak
 M:	kas@fi.muni.cz

[PATCH 2.6.14-rc4] Maintainers one entry removed

[Jiri Slaby]

Maintainers one entry removed

Computone intelliport multiport card is no longer maintained. The
maintainer doesn't respond to e-mails (3 times during 1 month). The page was
updated 2 years ago and there is no other contact.

Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>

---
commit a6e455aea055d5c0bd9abd69fc0c40b41d76b993
tree 583e168ce727b57836064b2a0eb63326a1ef529e
parent ef1b647cf1a27b138123d31ab885b3e92cdbe4e9
author root <root@anemoi.(none)> Wed, 12 Oct 2005 18:33:10 +0200
committer root <root@anemoi.(none)> Wed, 12 Oct 2005 18:33:10 +0200

 MAINTAINERS |    6 ------
 1 files changed, 0 insertions(+), 6 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -580,12 +580,6 @@ M:	scott@spiteful.org
 L:	pcihpd-discuss@lists.sourceforge.net
 S:	Supported
 
-COMPUTONE INTELLIPORT MULTIPORT CARD
-P:	Michael H. Warfield
-M:	mhw@wittsend.com
-W:	http://www.wittsend.com/computone.html
-S:	Maintained
-
 COSA/SRP SYNC SERIAL DRIVER
 P:	Jan "Yenya" Kasprzak
 M:	kas@fi.muni.cz

Re: [PATCH 2.6.14-rc4] Maintainers one entry removed

[Michael Krufky]

[-- Attachment #1: Type: text/plain, Size: 443 bytes --]

Jiri Slaby wrote:

>Maintainers one entry removed
>
>Computone intelliport multiport card is no longer maintained. The
>maintainer doesn't respond to e-mails (3 times during 1 month). The page was
>updated 2 years ago and there is no other contact.
>
>Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>
>
Rather than removing the entry entirely, wouldn't something like this be 
more appropriate?

Signed-off-by: Michael Krufky <mkrufky@m1k.net>



[-- Attachment #2: maintainer.patch --]
[-- Type: text/plain, Size: 432 bytes --]

diff -up a/MAINTAINERS b/MAINTAINERS
--- a/MAINTAINERS	2005-10-12 14:02:10.267405404 -0400
+++ b/MAINTAINERS	2005-10-12 14:09:48.621252057 -0400
@@ -581,10 +581,7 @@ L:	pcihpd-discuss@lists.sourceforge.net
 S:	Supported
 
 COMPUTONE INTELLIPORT MULTIPORT CARD
-P:	Michael H. Warfield
-M:	mhw@wittsend.com
-W:	http://www.wittsend.com/computone.html
-S:	Maintained
+S:	Orphaned
 
 COSA/SRP SYNC SERIAL DRIVER
 P:	Jan "Yenya" Kasprzak

Re: [PATCH 2.6.14-rc4] Maintainers one entry removed

[Alan Cox]

On Mer, 2005-10-12 at 19:06 +0200, Jiri Slaby wrote:
> Maintainers one entry removed
> 
> Computone intelliport multiport card is no longer maintained. The
> maintainer doesn't respond to e-mails (3 times during 1 month). The page was
> updated 2 years ago and there is no other contact.

Michael posted to fedora-list on October 1st and seems active. Have you
allowed for the fact he might be away, busy or that you could be in his
spam filters ?

Alan

Re: [PATCH 2.6.14-rc4] Maintainers one entry removed

[Michael H. Warfield]

[-- Attachment #1: Type: text/plain, Size: 2595 bytes --]

On Wed, 2005-10-12 at 20:37 +0200, Jiri Slaby wrote:
> On 10/12/05, Alan Cox <alan@lxorguk.ukuu.org.uk> wrote:
> > On Mer, 2005-10-12 at 19:06 +0200, Jiri Slaby wrote:
> > > Maintainers one entry removed
> > >
> > > Computone intelliport multiport card is no longer maintained. The
> > > maintainer doesn't respond to e-mails (3 times during 1 month). The page was
> > > updated 2 years ago and there is no other contact.

> > Michael posted to fedora-list on October 1st and seems active. Have you
> > allowed for the fact he might be away, busy or that you could be in his
> > spam filters ?
> So let's try his other e-mails, which I was not able to find before. Thanks.

	I'm still here and still responding to mhw@wittsend.com.  You may have
gotten caught up in a spam filter.  IAC...  I don't recall getting any
messages.  I have had contact with others on that address and I posted
to LKML back early this year that I was still alive after Andrew Morton
chimed in that I was still around and WittsEnd was still around.

> Hello Michael, is the Computone intelliport multiport card still
> maintained [and are you going to rewrite it to pci probing and the new
> api?] and/or mhw@wittsend.com e-mail from MAINTAINERS still active (as
> Alan wrote, I could be at on your black-list). So could you reply and
> tell us?

	You're not on a black list but CRM-114 may have caught you anyways.

	I spoke with Andrew about the Computone driver when we were both
speaking at Linux Lunacy last week.  I still intend to maintain it an
I've been working on the 2.6 driver.  I've got a spinlock problem that
has me in a bind at the moment with the patches.  I jokingly told Andrew
that he would get the patch as soon as I shot this problem and I was not
going to be like some people who sends him patches that don't even
compile.  :-)

	I thought the PCI stuff was there.  I'll look that over and see what
needs to be done.  Got some pointers to docs on what I need to update
for that?  I was talking to Andrew about the spinlock problems but he
didn't say anything about PCI probing.  What's missing?

> thanks,
> --
> Jiri Slaby         www.fi.muni.cz/~xslaby
> ~\-/~      jirislaby@gmail.com      ~\-/~
> B67499670407CE62ACC8 22A032CC55C339D47A7E

	Mike
-- 
 Michael H. Warfield    |  (770) 985-6132   |  mhw@WittsEnd.com  
  /\/\|=mhw=|\/\/       |  (678) 463-0932   |  http://www.wittsend.com/mhw/
  NIC whois:  MHW9      |  An optimist believes we live in the best of all
 PGP Key: 0xDF1DD471    |  possible worlds.  A pessimist is sure of it!

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 307 bytes --]

Re: [PATCH 2.6.14-rc4] Maintainers one entry removed

[Jiri Slaby]

Damn, I can't post nor to LKML now?

On 10/12/05, Michael H. Warfield <mhw@wittsend.com> wrote:
> > Hello Michael, is the Computone intelliport multiport card still
> > maintained [and are you going to rewrite it to pci probing and the new
> > api?] and/or mhw@wittsend.com e-mail from MAINTAINERS still active (as
> > Alan wrote, I could be at on your black-list). So could you reply and
> > tell us?
>
>         You're not on a black list but CRM-114 may have caught you anyways.
Grr.
>
>         I thought the PCI stuff was there.  I'll look that over and see what
> needs to be done.  Got some pointers to docs on what I need to update
> for that? I was talking to Andrew about the spinlock problems but he
> didn't say anything about PCI probing.  What's missing?
I wrote it badly. The driver is written old-styled with
pci_find_device function, which Greg KH wants to eliminate from the
kernel. The way how to do it is to rewrite the driver to PCI hotplug
(not as much work). The code needs to be splitted, some for loops
would go away, you will get an event, when the device, you decribe in
pci_tbl, is in the system.

regards,
--
Jiri Slaby         www.fi.muni.cz/~xslaby
~\-/~      jirislaby@gmail.com      ~\-/~
B67499670407CE62ACC8 22A032CC55C339D47A7E

Re: [PATCH 2.6.14-rc4] Maintainers one entry removed

[David S. Miller]

From: Jiri Slaby <jirislaby@gmail.com>
Date: Wed, 12 Oct 2005 22:09:39 +0200

> Damn, I can't post nor to LKML now?

If you're using gmail to send, probably you can't.  It's using various
encoding types, such as HTML, that we filter out here as %99 of that
is spam.

Re: [PATCH 2.6.14-rc4] Maintainers one entry removed

[Michael H. Warfield]

[-- Attachment #1: Type: text/plain, Size: 1845 bytes --]

On Wed, 2005-10-12 at 20:37 +0200, Jiri Slaby wrote:
> On 10/12/05, Alan Cox <alan@lxorguk.ukuu.org.uk> wrote:
> > On Mer, 2005-10-12 at 19:06 +0200, Jiri Slaby wrote:
> > > Maintainers one entry removed
> > >
> > > Computone intelliport multiport card is no longer maintained. The
> > > maintainer doesn't respond to e-mails (3 times during 1 month). The page was
> > > updated 2 years ago and there is no other contact.
> >
> > Michael posted to fedora-list on October 1st and seems active. Have you
> > allowed for the fact he might be away, busy or that you could be in his
> > spam filters ?
> So let's try his other e-mails, which I was not able to find before. Thanks.

> Hello Michael, is the Computone intelliport multiport card still
> maintained [and are you going to rewrite it to pci probing and the new
> api?] and/or mhw@wittsend.com e-mail from MAINTAINERS still active (as
> Alan wrote, I could be at on your black-list). So could you reply and
> tell us?

	Ah... Found out what happened.  They weren't getting dumped in a spam
folder (unless you consider LKML a spam folder :-) ).  All of your
messages included LKML in the cc and my procmail scripts obligingly
dumped all of them in my LKML folder.  And I'm just a few thousand
messages behind on that one ATM.  :-(  Sorry about that.  On it now.
Guess I need to "fine tune" that procmail receipe.

> thanks,
> --
> Jiri Slaby         www.fi.muni.cz/~xslaby
> ~\-/~      jirislaby@gmail.com      ~\-/~
> B67499670407CE62ACC8 22A032CC55C339D47A7E
-- 
 Michael H. Warfield    |  (770) 985-6132   |  mhw@WittsEnd.com  
  /\/\|=mhw=|\/\/       |  (678) 463-0932   |  http://www.wittsend.com/mhw/
  NIC whois:  MHW9      |  An optimist believes we live in the best of all
 PGP Key: 0xDF1DD471    |  possible worlds.  A pessimist is sure of it!

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 307 bytes --]

Re: [PATCH 1/10] drivers/char: pci_find_device remove (drivers/char/ip2main.c)

[Jeff Garzik]

Jiri Slaby wrote:
> Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>
> 
>  ip2main.c |    8 +++++---
>  1 files changed, 5 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/char/ip2main.c b/drivers/char/ip2main.c
> --- a/drivers/char/ip2main.c
> +++ b/drivers/char/ip2main.c
> @@ -442,6 +442,7 @@ cleanup_module(void)
>  #ifdef CONFIG_PCI
>  		if (ip2config.type[i] == PCI && ip2config.pci_dev[i]) {
>  			pci_disable_device(ip2config.pci_dev[i]);
> +			pci_dev_put(ip2config.pci_dev[i]);
>  			ip2config.pci_dev[i] = NULL;
>  		}
>  #endif
> @@ -594,9 +595,10 @@ ip2_loadmain(int *iop, int *irqp, unsign
>  		case PCI:
>  #ifdef CONFIG_PCI
>  			{
> -				struct pci_dev *pci_dev_i = NULL;
> -				pci_dev_i = pci_find_device(PCI_VENDOR_ID_COMPUTONE,
> -							  PCI_DEVICE_ID_COMPUTONE_IP2EX, pci_dev_i);
> +				struct pci_dev *pci_dev_i;
> +				pci_dev_i = pci_get_device(
> +					PCI_VENDOR_ID_COMPUTONE,
> +					PCI_DEVICE_ID_COMPUTONE_IP2EX, NULL);

convert to PCI probing

[PATCH 7/10] drivers/char: pci_find_device remove (drivers/char/sx.c)

[Jiri Slaby]

Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>

 sx.c |    2 +-
 1 files changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/char/sx.c b/drivers/char/sx.c
--- a/drivers/char/sx.c
+++ b/drivers/char/sx.c
@@ -2434,7 +2434,7 @@ static int __init sx_init(void) 
 	}
 
 #ifdef CONFIG_PCI
-	while ((pdev = pci_find_device (PCI_VENDOR_ID_SPECIALIX, 
+	while ((pdev = pci_get_device (PCI_VENDOR_ID_SPECIALIX, 
 					PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8, 
 					      pdev))) {
 		if (pci_enable_device(pdev))

[PATCH 5/10] drivers/char: pci_find_device remove (drivers/char/specialix.c)

[Jiri Slaby]

Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>

 specialix.c |    9 ++++++---
 1 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c
--- a/drivers/char/specialix.c
+++ b/drivers/char/specialix.c
@@ -2502,9 +2502,9 @@ static int __init specialix_init(void)
 				i++;
 				continue;
 			}
-			pdev = pci_find_device (PCI_VENDOR_ID_SPECIALIX, 
-			                        PCI_DEVICE_ID_SPECIALIX_IO8, 
-			                        pdev);
+			pdev = pci_get_device (PCI_VENDOR_ID_SPECIALIX,
+					PCI_DEVICE_ID_SPECIALIX_IO8,
+					pdev);
 			if (!pdev) break;
 
 			if (pci_enable_device(pdev))
@@ -2517,7 +2517,10 @@ static int __init specialix_init(void)
 			sx_board[i].flags |= SX_BOARD_IS_PCI;
 			if (!sx_probe(&sx_board[i]))
 				found ++;
+
 		}
+		if (i >= SX_NBOARD)
+			pci_dev_put(pdev);
 	}
 #endif
 

Re: [PATCH 5/10] drivers/char: pci_find_device remove (drivers/char/specialix.c)

[Jiri Slaby]

Cc: R.E.Wolff@BitWizard.nl [maintainer]

Jiri Slaby napsal(a):

>Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>
>
> specialix.c |    9 ++++++---
> 1 files changed, 6 insertions(+), 3 deletions(-)
>
>diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c
>--- a/drivers/char/specialix.c
>+++ b/drivers/char/specialix.c
>@@ -2502,9 +2502,9 @@ static int __init specialix_init(void)
> 				i++;
> 				continue;
> 			}
>-			pdev = pci_find_device (PCI_VENDOR_ID_SPECIALIX, 
>-			                        PCI_DEVICE_ID_SPECIALIX_IO8, 
>-			                        pdev);
>+			pdev = pci_get_device (PCI_VENDOR_ID_SPECIALIX,
>+					PCI_DEVICE_ID_SPECIALIX_IO8,
>+					pdev);
> 			if (!pdev) break;
> 
> 			if (pci_enable_device(pdev))
>@@ -2517,7 +2517,10 @@ static int __init specialix_init(void)
> 			sx_board[i].flags |= SX_BOARD_IS_PCI;
> 			if (!sx_probe(&sx_board[i]))
> 				found ++;
>+
> 		}
>+		if (i >= SX_NBOARD)
>+			pci_dev_put(pdev);
> 	}
> #endif
> 
>  
>

Re: [PATCH 5/10] drivers/char: pci_find_device remove (drivers/char/specialix.c)

[Jiri Slaby]

On 9/10/05, Jiri Slaby <jirislaby@gmail.com> wrote:
> Cc: R.E.Wolff@BitWizard.nl [maintainer]
Hello.

Is drivers/char/ip2main.c still maintained? Are you going to rewrite
this driver to 2.6 API (PCI probing etc.)?

thanks,
--
Jiri Slaby         www.fi.muni.cz/~xslaby
~\-/~      jirislaby@gmail.com      ~\-/~
241B347EC88228DE51EE A49C4A73A25004CB2A10

Re: [PATCH 5/10] drivers/char: pci_find_device remove (drivers/char/specialix.c)

[Jeff Garzik]

Jiri Slaby wrote:
> Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>
> 
>  specialix.c |    9 ++++++---
>  1 files changed, 6 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c
> --- a/drivers/char/specialix.c
> +++ b/drivers/char/specialix.c
> @@ -2502,9 +2502,9 @@ static int __init specialix_init(void)
>  				i++;
>  				continue;
>  			}
> -			pdev = pci_find_device (PCI_VENDOR_ID_SPECIALIX, 
> -			                        PCI_DEVICE_ID_SPECIALIX_IO8, 
> -			                        pdev);
> +			pdev = pci_get_device (PCI_VENDOR_ID_SPECIALIX,
> +					PCI_DEVICE_ID_SPECIALIX_IO8,
> +					pdev);
>  			if (!pdev) break;
>  
>  			if (pci_enable_device(pdev))
> @@ -2517,7 +2517,10 @@ static int __init specialix_init(void)
>  			sx_board[i].flags |= SX_BOARD_IS_PCI;
>  			if (!sx_probe(&sx_board[i]))
>  				found ++;
> +
>  		}
> +		if (i >= SX_NBOARD)
> +			pci_dev_put(pdev);

should be converted to PCI probing, rather than this.

	Jeff

Re: [PATCH 5/10] drivers/char: pci_find_device remove (drivers/char/specialix.c)

[Jiri Slaby]

Jeff Garzik napsal(a):
> Jiri Slaby wrote:
> 
>> Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>
>>
>>  specialix.c |    9 ++++++---
>>  1 files changed, 6 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c
>> --- a/drivers/char/specialix.c
>> +++ b/drivers/char/specialix.c
>> @@ -2502,9 +2502,9 @@ static int __init specialix_init(void)
>>                  i++;
>>                  continue;
>>              }
>> -            pdev = pci_find_device (PCI_VENDOR_ID_SPECIALIX, 
>> -                                    PCI_DEVICE_ID_SPECIALIX_IO8, 
>> -                                    pdev);
>> +            pdev = pci_get_device (PCI_VENDOR_ID_SPECIALIX,
>> +                    PCI_DEVICE_ID_SPECIALIX_IO8,
>> +                    pdev);
>>              if (!pdev) break;
>>  
>>              if (pci_enable_device(pdev))
>> @@ -2517,7 +2517,10 @@ static int __init specialix_init(void)
>>              sx_board[i].flags |= SX_BOARD_IS_PCI;
>>              if (!sx_probe(&sx_board[i]))
>>                  found ++;
>> +
>>          }
>> +        if (i >= SX_NBOARD)
>> +            pci_dev_put(pdev);
> 
> 
> should be converted to PCI probing, rather than this.
I won't do that, i did that for 2 drivers and nobody was interested in 
that (and its much time left for nothing). These (unrewritten) drivers 
would be deleted in some time. Greg wants simply wipe this function out.

regards,
-- 
Jiri Slaby         www.fi.muni.cz/~xslaby
~\-/~      jirislaby@gmail.com      ~\-/~
241B347EC88228DE51EE A49C4A73A25004CB2A10

Re: [PATCH 5/10] drivers/char: pci_find_device remove (drivers/char/specialix.c)

[Greg KH]

On Sat, Sep 10, 2005 at 11:00:34PM +0200, Jiri Slaby wrote:
> Jeff Garzik napsal(a):
> >Jiri Slaby wrote:
> >
> >>Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>
> >>
> >> specialix.c |    9 ++++++---
> >> 1 files changed, 6 insertions(+), 3 deletions(-)
> >>
> >>diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c
> >>--- a/drivers/char/specialix.c
> >>+++ b/drivers/char/specialix.c
> >>@@ -2502,9 +2502,9 @@ static int __init specialix_init(void)
> >>                 i++;
> >>                 continue;
> >>             }
> >>-            pdev = pci_find_device (PCI_VENDOR_ID_SPECIALIX, 
> >>-                                    PCI_DEVICE_ID_SPECIALIX_IO8, 
> >>-                                    pdev);
> >>+            pdev = pci_get_device (PCI_VENDOR_ID_SPECIALIX,
> >>+                    PCI_DEVICE_ID_SPECIALIX_IO8,
> >>+                    pdev);
> >>             if (!pdev) break;
> >> 
> >>             if (pci_enable_device(pdev))
> >>@@ -2517,7 +2517,10 @@ static int __init specialix_init(void)
> >>             sx_board[i].flags |= SX_BOARD_IS_PCI;
> >>             if (!sx_probe(&sx_board[i]))
> >>                 found ++;
> >>+
> >>         }
> >>+        if (i >= SX_NBOARD)
> >>+            pci_dev_put(pdev);
> >
> >
> >should be converted to PCI probing, rather than this.
> I won't do that, i did that for 2 drivers and nobody was interested in 
> that (and its much time left for nothing). These (unrewritten) drivers 
> would be deleted in some time. Greg wants simply wipe this function out.

No, I want it done correctly.  If I simply wanted the function removed,
I would have done this kind of wholesale conversion a long time ago.

If the code needs to be converted to the proper pci probing logic,
that's the better way to do it, and that's what should be done.

thanks,

greg k-h

Re: [PATCH 5/10] drivers/char: pci_find_device remove (drivers/char/specialix.c)

[Jiri Slaby]

Greg KH napsal(a):
> On Sat, Sep 10, 2005 at 11:00:34PM +0200, Jiri Slaby wrote:
> 
>>Jeff Garzik napsal(a):
>>
>>>Jiri Slaby wrote:
>>>
>>>
>>>>Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>
>>>>
>>>>specialix.c |    9 ++++++---
>>>>1 files changed, 6 insertions(+), 3 deletions(-)
>>>>
>>>>diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c
>>>>--- a/drivers/char/specialix.c
>>>>+++ b/drivers/char/specialix.c
>>>>@@ -2502,9 +2502,9 @@ static int __init specialix_init(void)
>>>>                i++;
>>>>                continue;
>>>>            }
>>>>-            pdev = pci_find_device (PCI_VENDOR_ID_SPECIALIX, 
>>>>-                                    PCI_DEVICE_ID_SPECIALIX_IO8, 
>>>>-                                    pdev);
>>>>+            pdev = pci_get_device (PCI_VENDOR_ID_SPECIALIX,
>>>>+                    PCI_DEVICE_ID_SPECIALIX_IO8,
>>>>+                    pdev);
>>>>            if (!pdev) break;
>>>>
>>>>            if (pci_enable_device(pdev))
>>>>@@ -2517,7 +2517,10 @@ static int __init specialix_init(void)
>>>>            sx_board[i].flags |= SX_BOARD_IS_PCI;
>>>>            if (!sx_probe(&sx_board[i]))
>>>>                found ++;
>>>>+
>>>>        }
>>>>+        if (i >= SX_NBOARD)
>>>>+            pci_dev_put(pdev);
>>>
>>>
>>>should be converted to PCI probing, rather than this.
>>
>>I won't do that, i did that for 2 drivers and nobody was interested in 
>>that (and its much time left for nothing). These (unrewritten) drivers 
>>would be deleted in some time. Greg wants simply wipe this function out.
> 
> 
> No, I want it done correctly.  If I simply wanted the function removed,
> I would have done this kind of wholesale conversion a long time ago.
> 
> If the code needs to be converted to the proper pci probing logic,
> that's the better way to do it, and that's what should be done.
I think so too, but some drivers, that uses pci_find_device are broken 
for a long time and nobody uses it at all.

So what should I do? I want others not to use pci_find_device 
furthermore, so I sent patch that marks it deprecated. Greg sent, that 
he wants to remove them and wants to kill 'em all from the tree. When I 
rewrote the 2 drivers, nobody wanted to test them and nobody acked them, 
nobody did anything. So:
a) rewrite non-broken drivers, the rest kill (or not to kill, only mark 
find as deprecated and let them live for some next time)
b) rewrite all
c) change find to get + dev_put
d) others: ................
[What about oss drivers?]

So, Greg and Jeff, your opinions?

thanks,
-- 
Jiri Slaby         www.fi.muni.cz/~xslaby
~\-/~      jirislaby@gmail.com      ~\-/~
241B347EC88228DE51EE A49C4A73A25004CB2A10

Re: [PATCH 5/10] drivers/char: pci_find_device remove (drivers/char/specialix.c)

[Jeff Garzik]

Jiri Slaby wrote:
> Greg KH napsal(a):
> 
>> On Sat, Sep 10, 2005 at 11:00:34PM +0200, Jiri Slaby wrote:
>>
>>> Jeff Garzik napsal(a):
>>>
>>>> Jiri Slaby wrote:
>>>>
>>>>
>>>>> Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>
>>>>>
>>>>> specialix.c |    9 ++++++---
>>>>> 1 files changed, 6 insertions(+), 3 deletions(-)
>>>>>
>>>>> diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c
>>>>> --- a/drivers/char/specialix.c
>>>>> +++ b/drivers/char/specialix.c
>>>>> @@ -2502,9 +2502,9 @@ static int __init specialix_init(void)
>>>>>                i++;
>>>>>                continue;
>>>>>            }
>>>>> -            pdev = pci_find_device (PCI_VENDOR_ID_SPECIALIX, 
>>>>> -                                    PCI_DEVICE_ID_SPECIALIX_IO8, 
>>>>> -                                    pdev);
>>>>> +            pdev = pci_get_device (PCI_VENDOR_ID_SPECIALIX,
>>>>> +                    PCI_DEVICE_ID_SPECIALIX_IO8,
>>>>> +                    pdev);
>>>>>            if (!pdev) break;
>>>>>
>>>>>            if (pci_enable_device(pdev))
>>>>> @@ -2517,7 +2517,10 @@ static int __init specialix_init(void)
>>>>>            sx_board[i].flags |= SX_BOARD_IS_PCI;
>>>>>            if (!sx_probe(&sx_board[i]))
>>>>>                found ++;
>>>>> +
>>>>>        }
>>>>> +        if (i >= SX_NBOARD)
>>>>> +            pci_dev_put(pdev);
>>>>
>>>>
>>>>
>>>> should be converted to PCI probing, rather than this.
>>>
>>>
>>> I won't do that, i did that for 2 drivers and nobody was interested 
>>> in that (and its much time left for nothing). These (unrewritten) 
>>> drivers would be deleted in some time. Greg wants simply wipe this 
>>> function out.
>>
>>
>>
>> No, I want it done correctly.  If I simply wanted the function removed,
>> I would have done this kind of wholesale conversion a long time ago.
>>
>> If the code needs to be converted to the proper pci probing logic,
>> that's the better way to do it, and that's what should be done.
> 
> I think so too, but some drivers, that uses pci_find_device are broken 
> for a long time and nobody uses it at all.
> 
> So what should I do? I want others not to use pci_find_device 
> furthermore, so I sent patch that marks it deprecated. Greg sent, that 
> he wants to remove them and wants to kill 'em all from the tree. When I 
> rewrote the 2 drivers, nobody wanted to test them and nobody acked them, 
> nobody did anything. So:
> a) rewrite non-broken drivers, the rest kill (or not to kill, only mark 
> find as deprecated and let them live for some next time)
> b) rewrite all
> c) change find to get + dev_put
> d) others: ................
> [What about oss drivers?]
> 
> So, Greg and Jeff, your opinions?


If the drivers aren't used or maintained, remove them from the kernel tree.

	Jeff

[PATCH] (i)stallion remove

[Jiri Slaby]

Jeff Garzik wrote:

> If the drivers aren't used or maintained, remove them from the kernel 
> tree.

So, this as a first:

(I)stallion remove from the tree, it contains pci_find_device, it is 
unmaintained and broken for a long time. Noone uses it.

Generated in 2.6.13-mm2 kernel version. [Applicable also on 2.6.13-git10]

Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>

 Documentation/stallion.txt       |  392 --
 Documentation/00-INDEX         |    2
 Documentation/devices.txt      |   31
 Documentation/magic-number.txt |    5
 drivers/char/Kconfig           |   22
 drivers/char/Makefile          |    2
 drivers/char/istallion.c         | 5275 
---------------------------------------
 drivers/char/stallion.c          | 5197 
--------------------------------------
 include/linux/istallion.h        |  132
 include/linux/stallion.h         |  154 -
 10 files changed, 11212 deletions(-)

Patch is here for its size (300 KiB):
http://www.fi.muni.cz/~xslaby/lnx/stallion.txt

-- 
Jiri Slaby         www.fi.muni.cz/~xslaby
~\-/~      jirislaby@gmail.com      ~\-/~
241B347EC88228DE51EE A49C4A73A25004CB2A10

Re: [PATCH] (i)stallion remove

[Alan Cox]

On Sul, 2005-09-11 at 00:39 +0200, Jiri Slaby wrote:
> Jeff Garzik wrote:
> 
> > If the drivers aren't used or maintained, remove them from the kernel 
> > tree.
> 
> So, this as a first:
> 
> (I)stallion remove from the tree, it contains pci_find_device, it is 
> unmaintained and broken for a long time. Noone uses it.

Nak-by: Alan Cox <alan@redhat.com>

Its still on my hitlist - I'm slowly fixing them all

Re: [PATCH] (i)stallion remove

[Matthew Wilcox]

On Sun, Sep 11, 2005 at 01:03:43AM +0100, Alan Cox wrote:
> On Sul, 2005-09-11 at 00:39 +0200, Jiri Slaby wrote:
> > Jeff Garzik wrote:
> > 
> > > If the drivers aren't used or maintained, remove them from the kernel 
> > > tree.
> > 
> > So, this as a first:
> > 
> > (I)stallion remove from the tree, it contains pci_find_device, it is 
> > unmaintained and broken for a long time. Noone uses it.
> 
> Nak-by: Alan Cox <alan@redhat.com>
> 
> Its still on my hitlist - I'm slowly fixing them all

Are you converting them to the new serial infrastructure at the same
time?

Re: [PATCH] (i)stallion remove

[Alan Cox]

On Sad, 2005-09-10 at 17:39 -0600, Matthew Wilcox wrote:
> > Nak-by: Alan Cox <alan@redhat.com>
> > 
> > Its still on my hitlist - I'm slowly fixing them all
> 
> Are you converting them to the new serial infrastructure at the same
> time?

No.. I thought I'd be old fashioned and know why they broke by doing one
thing at a time 8)

Some of these controllers would fit the serial infrastructure, others
have interesting locking (ISA window mapping for example) or DMA/polling
interfaces that don't yet seem to fit. 

Alan

Re: [PATCH] (i)stallion remove

[Peter Chubb]

>>>>> "Jiri" == Jiri Slaby <jirislaby@gmail.com> writes:

Jiri> (I)stallion remove from the tree, it contains pci_find_device,
Jiri> it is unmaintained and broken for a long time. Noone uses it.

Arrrg!  We're using it!  It works on UP ia64.  If you want to remove
it, please send us a supported 8-port serial card :-)

-- 
Dr Peter Chubb  http://www.gelato.unsw.edu.au  peterc AT gelato.unsw.edu.au
The technical we do immediately,  the political takes *forever*

Re: [PATCH] (i)stallion remove

[Jiri Slaby]

Peter Chubb napsal(a):
>>>>>>"Jiri" == Jiri Slaby <jirislaby@gmail.com> writes:
> 
> 
> Jiri> (I)stallion remove from the tree, it contains pci_find_device,
> Jiri> it is unmaintained and broken for a long time. Noone uses it.
> 
> Arrrg!  We're using it!  It works on UP ia64.  If you want to remove
> it, please send us a supported 8-port serial card :-)
> 
No, i don't want to do it (neither remove, nor send :) ).

regards,
-- 
Jiri Slaby         www.fi.muni.cz/~xslaby
~\-/~      jirislaby@gmail.com      ~\-/~
241B347EC88228DE51EE A49C4A73A25004CB2A10

Re: [PATCH] (i)stallion remove

[Christoph Hellwig]

On Mon, Sep 12, 2005 at 11:39:32AM +1000, Peter Chubb wrote:
> >>>>> "Jiri" == Jiri Slaby <jirislaby@gmail.com> writes:
> 
> Jiri> (I)stallion remove from the tree, it contains pci_find_device,
> Jiri> it is unmaintained and broken for a long time. Noone uses it.
> 
> Arrrg!  We're using it!  It works on UP ia64.  If you want to remove
> it, please send us a supported 8-port serial card :-)

At least we found a tester now.  With this message you just signed up
voluntarily to test a version that brings the driver into the 21st
century ;-)

Re: [PATCH 5/10] drivers/char: pci_find_device remove (drivers/char/specialix.c)

[Jiri Slaby]

Greg KH napsal(a):

>>I won't do that, i did that for 2 drivers and nobody was interested in 
>>that (and its much time left for nothing). These (unrewritten) drivers 
>>would be deleted in some time. Greg wants simply wipe this function out.
>>    
>>
>No, I want it done correctly.  If I simply wanted the function removed,
>I would have done this kind of wholesale conversion a long time ago.
>
>If the code needs to be converted to the proper pci probing logic,
>that's the better way to do it, and that's what should be done.
>  
>
Okay, could you reply the letter i posted a few seconds ago.

thanks,

-- 
Jiri Slaby         www.fi.muni.cz/~xslaby
~\-/~      jirislaby@gmail.com      ~\-/~
241B347EC88228DE51EE A49C4A73A25004CB2A10

[PATCH 4/10] drivers/char: pci_find_device remove (drivers/char/rocket.c)

[Jiri Slaby]

Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>

 rocket.c |    2 +-
 1 files changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c
--- a/drivers/char/rocket.c
+++ b/drivers/char/rocket.c
@@ -2234,7 +2234,7 @@ static int __init init_PCI(int boards_fo
 	int count = 0;
 
 	/*  Work through the PCI device list, pulling out ours */
-	while ((dev = pci_find_device(PCI_VENDOR_ID_RP, PCI_ANY_ID, dev))) {
+	while ((dev = pci_get_device(PCI_VENDOR_ID_RP, PCI_ANY_ID, dev))) {
 		if (register_PCI(count + boards_found, dev))
 			count++;
 	}

Re: [PATCH 4/10] drivers/char: pci_find_device remove (drivers/char/rocket.c)

[Jeff Garzik]

Jiri Slaby wrote:
> diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c
> --- a/drivers/char/rocket.c
> +++ b/drivers/char/rocket.c
> @@ -2234,7 +2234,7 @@ static int __init init_PCI(int boards_fo
>  	int count = 0;
>  
>  	/*  Work through the PCI device list, pulling out ours */
> -	while ((dev = pci_find_device(PCI_VENDOR_ID_RP, PCI_ANY_ID, dev))) {
> +	while ((dev = pci_get_device(PCI_VENDOR_ID_RP, PCI_ANY_ID, dev))) {
>  		if (register_PCI(count + boards_found, dev))
>  			count++;

convert to PCI probing, rather than this

	Jeff

[PATCH 8/10] drivers/char: pci_find_device remove (drivers/char/watchdog/alim1535_wdt.c)

[Jiri Slaby]

Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>

 alim1535_wdt.c |   12 +++++++++---
 1 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/char/watchdog/alim1535_wdt.c b/drivers/char/watchdog/alim1535_wdt.c
--- a/drivers/char/watchdog/alim1535_wdt.c
+++ b/drivers/char/watchdog/alim1535_wdt.c
@@ -330,17 +330,20 @@ static int __init ali_find_watchdog(void
 	u32 wdog;
 
 	/* Check for a 1535 series bridge */
-	pdev = pci_find_device(PCI_VENDOR_ID_AL, 0x1535, NULL);
+	pdev = pci_get_device(PCI_VENDOR_ID_AL, 0x1535, NULL);
 	if(pdev == NULL)
 		return -ENODEV;
+	pci_dev_put(pdev);
 
 	/* Check for the a 7101 PMU */
-	pdev = pci_find_device(PCI_VENDOR_ID_AL, 0x7101, NULL);
+	pdev = pci_get_device(PCI_VENDOR_ID_AL, 0x7101, NULL);
 	if(pdev == NULL)
 		return -ENODEV;
 
-	if(pci_enable_device(pdev))
+	if(pci_enable_device(pdev)) {
+		pci_dev_put(pdev);
 		return -EIO;
+	}
 
 	ali_pci = pdev;
 
@@ -392,6 +395,8 @@ static int __init watchdog_init(void)
 {
 	int ret;
 
+	ali_pci = NULL;
+
 	spin_lock_init(&ali_lock);
 
 	/* Check whether or not the hardware watchdog is there */
@@ -445,6 +450,7 @@ static void __exit watchdog_exit(void)
 	ali_stop();
 
 	/* Deregister */
+	pci_dev_put(ali_pci);
 	unregister_reboot_notifier(&ali_notifier);
 	misc_deregister(&ali_miscdev);
 }

[PATCH 9/10] drivers/char: pci_find_device remove (drivers/char/watchdog/alim7101_wdt.c)

[Jiri Slaby]

Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>

 alim7101_wdt.c |    9 +++++++--
 1 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/char/watchdog/alim7101_wdt.c b/drivers/char/watchdog/alim7101_wdt.c
--- a/drivers/char/watchdog/alim7101_wdt.c
+++ b/drivers/char/watchdog/alim7101_wdt.c
@@ -333,6 +333,8 @@ static void __exit alim7101_wdt_unload(v
 	/* Deregister */
 	misc_deregister(&wdt_miscdev);
 	unregister_reboot_notifier(&wdt_notifier);
+
+	pci_dev_put(alim7101_pmu);
 }
 
 static int __init alim7101_wdt_init(void)
@@ -342,7 +344,8 @@ static int __init alim7101_wdt_init(void
 	char tmp;
 
 	printk(KERN_INFO PFX "Steve Hill <steve@navaho.co.uk>.\n");
-	alim7101_pmu = pci_find_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101,NULL);
+	alim7101_pmu = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101,
+		NULL);
 	if (!alim7101_pmu) {
 		printk(KERN_INFO PFX "ALi M7101 PMU not present - WDT not set\n");
 		return -EBUSY;
@@ -351,12 +354,14 @@ static int __init alim7101_wdt_init(void
 	/* Set the WDT in the PMU to 1 second */
 	pci_write_config_byte(alim7101_pmu, ALI_7101_WDT, 0x02);
 
-	ali1543_south = pci_find_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
+	ali1543_south = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533,
+		NULL);
 	if (!ali1543_south) {
 		printk(KERN_INFO PFX "ALi 1543 South-Bridge not present - WDT not set\n");
 		return -EBUSY;
 	}
 	pci_read_config_byte(ali1543_south, 0x5e, &tmp);
+	pci_dev_put(ali1543_south);
 	if ((tmp & 0x1e) == 0x00) {
 		if (!use_gpio) {
 			printk(KERN_INFO PFX "Detected old alim7101 revision 'a1d'.  If this is a cobalt board, set the 'use_gpio' module parameter.\n");

[PATCH 2/10] drivers/char: pci_find_device remove (drivers/char/istallion.c)

[Jiri Slaby]

Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>

 istallion.c |    9 +++++----
 1 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
--- a/drivers/char/istallion.c
+++ b/drivers/char/istallion.c
@@ -4602,11 +4602,12 @@ static int stli_findpcibrds(void)
 	printk("stli_findpcibrds()\n");
 #endif
 
-	while ((dev = pci_find_device(PCI_VENDOR_ID_STALLION,
-	    PCI_DEVICE_ID_ECRA, dev))) {
-		if ((rc = stli_initpcibrd(BRD_ECPPCI, dev)))
+	while ((dev = pci_get_device(PCI_VENDOR_ID_STALLION,
+			PCI_DEVICE_ID_ECRA, dev)))
+		if ((rc = stli_initpcibrd(BRD_ECPPCI, dev))) {
+			pci_dev_put(dev);
 			return(rc);
-	}
+		}
 
 	return(0);
 }

[PATCH 3/10] drivers/char: pci_find_device remove (drivers/char/mxser.c)

[Jiri Slaby]

Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>

 mxser.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -511,6 +511,7 @@ static void __exit mxser_module_exit(voi
 			if (pdev != NULL) {	//PCI
 				release_region(pci_resource_start(pdev, 2), pci_resource_len(pdev, 2));
 				release_region(pci_resource_start(pdev, 3), pci_resource_len(pdev, 3));
+				pci_dev_put(pdev);
 			} else {
 				release_region(mxsercfg[i].ioaddr[0], 8 * mxsercfg[i].ports);
 				release_region(mxsercfg[i].vector, 1);
@@ -831,7 +832,7 @@ static int mxser_init(void)
 	index = 0;
 	b = 0;
 	while (b < n) {
-		pdev = pci_find_device(mxser_pcibrds[b].vendor, mxser_pcibrds[b].device, pdev);
+		pdev = pci_get_device(mxser_pcibrds[b].vendor, mxser_pcibrds[b].device, pdev);
 			if (pdev == NULL) {
 			b++;
 			continue;

[PATCH 6/10] drivers/char: pci_find_device remove (drivers/char/stallion.c)

[Jiri Slaby]

Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>

 stallion.c |    6 ++++--
 1 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c
--- a/drivers/char/stallion.c
+++ b/drivers/char/stallion.c
@@ -2726,7 +2726,7 @@ static inline int stl_findpcibrds(void)
 #endif
 
 	for (i = 0; (i < stl_nrpcibrds); i++)
-		while ((dev = pci_find_device(stl_pcibrds[i].vendid,
+		while ((dev = pci_get_device(stl_pcibrds[i].vendid,
 		    stl_pcibrds[i].devid, dev))) {
 
 /*
@@ -2737,8 +2737,10 @@ static inline int stl_findpcibrds(void)
 				continue;
 
 			rc = stl_initpcibrd(stl_pcibrds[i].brdtype, dev);
-			if (rc)
+			if (rc) {
+				pci_dev_put(dev);
 				return(rc);
+			}
 		}
 
 	return(0);

Re: [PATCH 6/10] drivers/char: pci_find_device remove (drivers/char/stallion.c)

[Jeff Garzik]

Jiri Slaby wrote:
>  	for (i = 0; (i < stl_nrpcibrds); i++)
> -		while ((dev = pci_find_device(stl_pcibrds[i].vendid,
> +		while ((dev = pci_get_device(stl_pcibrds[i].vendid,
>  		    stl_pcibrds[i].devid, dev))) {
>  
>  /*
> @@ -2737,8 +2737,10 @@ static inline int stl_findpcibrds(void)
>  				continue;
>  
>  			rc = stl_initpcibrd(stl_pcibrds[i].brdtype, dev);
> -			if (rc)
> +			if (rc) {
> +				pci_dev_put(dev);
>  				return(rc);
> +			}

convert to PCI probing

	Jeff

[PATCH 10/10] drivers/char: pci_find_device remove (drivers/char/watchdog/i8xx_tco.c)

[Jiri Slaby]

Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>

 i8xx_tco.c |    5 +++--
 1 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/char/watchdog/i8xx_tco.c b/drivers/char/watchdog/i8xx_tco.c
--- a/drivers/char/watchdog/i8xx_tco.c
+++ b/drivers/char/watchdog/i8xx_tco.c
@@ -414,12 +414,11 @@ static unsigned char __init i8xx_tco_get
 	 *      Find the PCI device
 	 */
 
-	while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+	for_each_pci_dev(dev)
 		if (pci_match_id(i8xx_tco_pci_tbl, dev)) {
 			i8xx_tco_pci = dev;
 			break;
 		}
-	}
 
 	if (i8xx_tco_pci) {
 		/*
@@ -535,6 +534,8 @@ static void __exit watchdog_cleanup (voi
 	misc_deregister (&i8xx_tco_miscdev);
 	unregister_reboot_notifier(&i8xx_tco_notifier);
 	release_region (TCOBASE, 0x10);
+
+	pci_dev_put(i8xx_tco_pci);
 }
 
 module_init(watchdog_init);

Re: [PATCH 10/10] drivers/char: pci_find_device remove (drivers/char/watchdog/i8xx_tco.c)

[Jiri Slaby]

Cc: nils@kernelconcepts.de [maintainer]

Jiri Slaby napsal(a):

>Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>
>
> i8xx_tco.c |    5 +++--
> 1 files changed, 3 insertions(+), 2 deletions(-)
>
>diff --git a/drivers/char/watchdog/i8xx_tco.c b/drivers/char/watchdog/i8xx_tco.c
>--- a/drivers/char/watchdog/i8xx_tco.c
>+++ b/drivers/char/watchdog/i8xx_tco.c
>@@ -414,12 +414,11 @@ static unsigned char __init i8xx_tco_get
> 	 *      Find the PCI device
> 	 */
> 
>-	while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
>+	for_each_pci_dev(dev)
> 		if (pci_match_id(i8xx_tco_pci_tbl, dev)) {
> 			i8xx_tco_pci = dev;
> 			break;
> 		}
>-	}
> 
> 	if (i8xx_tco_pci) {
> 		/*
>@@ -535,6 +534,8 @@ static void __exit watchdog_cleanup (voi
> 	misc_deregister (&i8xx_tco_miscdev);
> 	unregister_reboot_notifier(&i8xx_tco_notifier);
> 	release_region (TCOBASE, 0x10);
>+
>+	pci_dev_put(i8xx_tco_pci);
> }
> 
> module_init(watchdog_init);
>  
>

Re: [PATCH 10/10] drivers/char: pci_find_device remove (drivers/char/watchdog/i8xx_tco.c)

[Nils Faerber]

Thanks, looks fine to me so I added my signed-off.

Jiri Slaby wrote:
> Cc: nils@kernelconcepts.de [maintainer]
> 
> Jiri Slaby napsal(a):
> 
>> Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>

Signed-off-by: Nils Faerber <nils@kernelconcepts.de>

>> i8xx_tco.c |    5 +++--
>> 1 files changed, 3 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/char/watchdog/i8xx_tco.c
>> b/drivers/char/watchdog/i8xx_tco.c
>> --- a/drivers/char/watchdog/i8xx_tco.c
>> +++ b/drivers/char/watchdog/i8xx_tco.c
>> @@ -414,12 +414,11 @@ static unsigned char __init i8xx_tco_get
>>      *      Find the PCI device
>>      */
>>
>> -    while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) !=
>> NULL) {
>> +    for_each_pci_dev(dev)
>>         if (pci_match_id(i8xx_tco_pci_tbl, dev)) {
>>             i8xx_tco_pci = dev;
>>             break;
>>         }
>> -    }
>>
>>     if (i8xx_tco_pci) {
>>         /*
>> @@ -535,6 +534,8 @@ static void __exit watchdog_cleanup (voi
>>     misc_deregister (&i8xx_tco_miscdev);
>>     unregister_reboot_notifier(&i8xx_tco_notifier);
>>     release_region (TCOBASE, 0x10);
>> +
>> +    pci_dev_put(i8xx_tco_pci);
>> }
>>
>> module_init(watchdog_init);
>>  
>>
> 

Cheers
  nils faerber

-- 
kernel concepts          Tel: +49-271-771091-12
Dreisbachstr. 24         Fax: +49-271-771091-19
D-57250 Netphen          Mob: +49-176-21024535
--

Re: [PATCH 10/10] drivers/char: pci_find_device remove (drivers/char/watchdog/i8xx_tco.c)

[Jeff Garzik]

Jiri Slaby wrote:
> diff --git a/drivers/char/watchdog/i8xx_tco.c b/drivers/char/watchdog/i8xx_tco.c
> --- a/drivers/char/watchdog/i8xx_tco.c
> +++ b/drivers/char/watchdog/i8xx_tco.c
> -	while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
> +	for_each_pci_dev(dev)
>  		if (pci_match_id(i8xx_tco_pci_tbl, dev)) {
>  			i8xx_tco_pci = dev;
>  			break;
>  		}
> -	}


Surely there is a better way to handle bridge matching?

	Jeff

Re: [PATCH 10/10] drivers/char: pci_find_device remove (drivers/char/watchdog/i8xx_tco.c)

[Matthieu CASTET]

Le Sat, 10 Sep 2005 16:58:49 -0400, Jeff Garzik a écrit :

> Jiri Slaby wrote:
>> diff --git a/drivers/char/watchdog/i8xx_tco.c b/drivers/char/watchdog/i8xx_tco.c
>> --- a/drivers/char/watchdog/i8xx_tco.c
>> +++ b/drivers/char/watchdog/i8xx_tco.c
>> -	while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
>> +	for_each_pci_dev(dev)
>>  		if (pci_match_id(i8xx_tco_pci_tbl, dev)) {
>>  			i8xx_tco_pci = dev;
>>  			break;
>>  		}
>> -	}
> 
> 
> Surely there is a better way to handle bridge matching?
> 
That what is already done in drivers/char/hw_random.c ...