public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Manu Abraham <manu@linuxtv.org>
To: Rolf Eike Beer <eike-kernel@sf-tec.de>
Cc: Jiri Slaby <jirislaby@gmail.com>, linux-kernel@vger.kernel.org
Subject: Re: PCI driver
Date: Thu, 15 Sep 2005 12:51:54 +0400	[thread overview]
Message-ID: <4329362A.1030201@linuxtv.org> (raw)
In-Reply-To: <200509151018.20322@bilbo.math.uni-mannheim.de>

Rolf Eike Beer wrote:

>That is true, but you should not call pci_get_device() in this function at 
>all.
>
>  
>
I reworked the whole thing over  .. but i am feeling that something's a 
bit wrong somewhere ..

The log i get on a load - unload ..

[  102.261264] mantis_pci_probe: Got a device
[  102.262852] mantis_pci_probe: We got an IRQ
[  102.264392] mantis_pci_probe: We finally enabled the device
[  102.266020] Mantis Rev 1, irq: 23, latency: 32
[  102.266118]          memory: 0xefeff000, mmio: f9218000
[  102.269162] Trying to free free IRQ23
[  110.297341] mantis_pci_remove: Removing -->Mantis irq: 23,         
latency: 32
[  110.297344]  memory: 0xefeff000, mmio: 0xf9218000
[  110.301326] Trying to free free IRQ23
[  110.303445] Trying to free nonexistent resource <efeff000-efefffff>


#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <linux/interrupt.h>
#include <linux/kmod.h>
#include <linux/vmalloc.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/device.h>
#include "mantis_common.h"
#include "mantis_dma.h"
#include "mantis_i2c.h"
#include "mantis_eeprom.h"

#define DRIVER_NAME                "Mantis"

static struct pci_device_id mantis_pci_table[] = {
    { PCI_DEVICE(PCI_VENDOR_ID_MANTIS, PCI_DEVICE_ID_MANTIS_R11) },
    { 0 },
};

MODULE_DEVICE_TABLE(pci, mantis_pci_table);

static irqreturn_t mantis_pci_irq(int irq, void *dev_id, struct pt_regs 
*regs)
{
    struct mantis_pci *mantis;
   
    dprintk(verbose, MANTIS_DEBUG, 1, "Mantis PCI IRQ");
    mantis = (struct mantis_pci *) dev_id;
    if (mantis == NULL)
        dprintk(verbose, MANTIS_DEBUG, 1, "Aeio, mantis ISR");
   
    /*    Events
     *    (1) PCMCIA insert
     *    (2) PCMCIA extract
     *    (3) I2C complete
     */
   
    return IRQ_HANDLED;
}

static int mantis_i2c_setup(struct mantis_pci *mantis)
{
    u32 config = 0;
   
//    mmwrite(0x80, MANTIS_DMA_CTL); // MCU i2c read
    config = mmread(MANTIS_DMA_CTL);
    dprintk(verbose, MANTIS_DEBUG, 1, "Mantis Ctl reg=0x%04x", config);

    return 0;   
}

static int mantis_reg_dump(struct mantis_pci *mantis)
{
    u32 ctlreg, intstat, intmask, i2cdata;
   
    ctlreg = mmread(MANTIS_DMA_CTL);
    intstat = mmread(MANTIS_INT_STAT);
    intmask = mmread(MANTIS_INT_MASK);
    i2cdata = mmread(MANTIS_I2C_DATA);
    dprintk(verbose, MANTIS_DEBUG, 1, "CTL_REG=0x%04x, INT_STAT=0x%04x, \
        INT_MASK=0x%04x, I2C_DATA=0x%04x", ctlreg, intstat,        \
        intmask, i2cdata);
   
    return 0;
}

static int __devinit mantis_pci_probe(struct pci_dev *pdev,
                const struct pci_device_id *mantis_pci_table)
{
    u8 revision, latency;
//    u8 data[2];   
    struct mantis_pci *mantis;
    mantis = (struct mantis_pci *)
                kmalloc(sizeof (struct mantis_pci), GFP_KERNEL);
    if (mantis == NULL) {
        dprintk(verbose, MANTIS_ERROR, 1, "Out of memory");
        return -ENOMEM;
    }
    dprintk(verbose, MANTIS_ERROR, 1, "Got a device");
    mantis->mantis_addr = pci_resource_start(pdev, 0);
    if (!request_mem_region(pci_resource_start(pdev, 0),
        pci_resource_len(pdev, 0), DRIVER_NAME)) {
        dprintk(verbose, MANTIS_ERROR, 1, "Request mem region failed");
        goto err0;
    }
    if ((mantis->mantis_mmio =
                ioremap(mantis->mantis_addr, 0x1000)) == NULL) {
        dprintk(verbose, MANTIS_ERROR, 1, "IO remap failed");
        goto err1;
    }
    if (request_irq(pdev->irq, mantis_pci_irq, SA_SHIRQ |
                SA_INTERRUPT, DRIVER_NAME, mantis) < 0) {
        dprintk(verbose, MANTIS_ERROR, 1, "Mantis IRQ reg failed");
        goto err2;
    }
    dprintk(verbose, MANTIS_DEBUG, 1, "We got an IRQ");
    if (pci_enable_device(pdev)) {
        dprintk(verbose, MANTIS_ERROR, 1, "Mantis PCI enable failed");
        goto err3;       
    }
    dprintk(verbose, MANTIS_DEBUG, 1, "We finally enabled the device");
    pci_set_master(pdev);
    pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &latency);
    pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
    mantis->latency = latency;
    mantis->revision = revision;
    if (!latency) {
        pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 32);
    }
    pci_set_drvdata(pdev, mantis);   
    dprintk(verbose, MANTIS_ERROR, 0, "Mantis Rev %d, ", mantis->revision);
    dprintk(verbose, MANTIS_ERROR, 0, "irq: %d, latency: %d\n \
        memory: 0x%04x, mmio: %p\n", pdev->irq, mantis->latency,    \
        mantis->mantis_addr, mantis->mantis_mmio);   
err3:
    free_irq(pdev->irq, pdev);   
err2:
    if (mantis->mantis_mmio)
        iounmap(mantis->mantis_mmio);
err1:
    release_mem_region(pci_resource_start(pdev, 0),
                pci_resource_len(pdev, 0));
err0:
    kfree(mantis);
   
    return 0;
}

static void __devexit mantis_pci_remove(struct pci_dev *pdev)
{
    struct mantis_pci *mantis = pci_get_drvdata(pdev);
    if (mantis == NULL) {
        dprintk(verbose, MANTIS_ERROR, 1, "Aeio, MAntis NULL ptr");
        return;
    }
    dprintk(verbose, MANTIS_ERROR, 1, "Removing -->Mantis irq: %d, \
        latency: %d\n memory: 0x%04x, mmio: 0x%p",
        pdev->irq, mantis->latency, mantis->mantis_addr,
        mantis->mantis_mmio);

    free_irq(pdev->irq, pdev);
   
    release_mem_region(pci_resource_start(pdev, 0),
        pci_resource_len(pdev, 0));
    pci_set_drvdata(pdev, NULL);
    pci_disable_device(pdev);
    kfree(mantis);
}

static struct pci_driver mantis_pci_driver = {
    .name = "Mantis PCI combo driver",
    .id_table = mantis_pci_table,
    .probe = mantis_pci_probe,
    .remove = mantis_pci_remove,
};

static int __devinit mantis_pci_init(void)
{
    return pci_register_driver(&mantis_pci_driver);
}

static void __devexit mantis_pci_exit(void)
{
    pci_unregister_driver(&mantis_pci_driver);
}

module_init(mantis_pci_init);
module_exit(mantis_pci_exit);

MODULE_DESCRIPTION("Mantis PCI DTV bridge driver");
MODULE_AUTHOR("Manu Abraham");
MODULE_LICENSE("GPL");




  reply	other threads:[~2005-09-15  9:03 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-09-14  9:34 PCI driver Manu Abraham
2005-09-14 10:03 ` Jiri Slaby
2005-09-14 10:02   ` Manu Abraham
2005-09-14 10:29     ` Jiri Slaby
2005-09-14 11:53       ` Manu Abraham
2005-09-14 12:22         ` Jiri Slaby
2005-09-14 12:28           ` Manu Abraham
2005-09-14 12:48           ` Manu Abraham
2005-09-14 16:16             ` Jiri Slaby
2005-09-14 17:09               ` Manu Abraham
2005-09-14 19:00                 ` Jiri Slaby
2005-09-14 19:00                   ` Manu Abraham
2005-09-14 19:16                     ` Jiri Slaby
2005-09-14 19:20                       ` Manu Abraham
2005-09-14 22:27                       ` Manu Abraham
2005-09-15  6:43                         ` Rolf Eike Beer
2005-09-15  7:45                           ` Manu Abraham
2005-09-15  8:18                             ` Rolf Eike Beer
2005-09-15  8:51                               ` Manu Abraham [this message]
2005-09-15  9:48                                 ` Rolf Eike Beer
2005-09-15 14:38                                   ` Manu Abraham
2005-09-15 14:57                                     ` Rolf Eike Beer
2005-09-15 16:59                                       ` Manu Abraham
2005-09-15 18:29                                       ` Manu Abraham
2005-09-15 10:29                                 ` Ralph Metzler
2005-09-15 10:35                                   ` Manu Abraham
2005-09-15 11:42                                   ` Manu Abraham
2005-09-15 12:08                                     ` Antonino A. Daplas
2005-09-15 12:24                                       ` Rolf Eike Beer
2005-09-15 12:32                                       ` Manu Abraham
2005-09-15 12:08                                     ` Rolf Eike Beer
2005-10-10 12:02                         ` Rolf Eike Beer
2005-10-10 12:48                           ` Manu Abraham
2005-10-10 13:25                             ` Rolf Eike Beer
2005-10-10 13:16                               ` Manu Abraham
     [not found]                             ` <3888a5cd0510100719r3fddc368oa01e07e2c42b71e@mail.gmail.com>
2005-10-10 15:00                               ` Manu Abraham
     [not found]                                 ` <3888a5cd0510100846p7f2ff70cid69a1136b9256ab6@mail.gmail.com>
2005-10-10 17:08                                   ` Manu Abraham
     [not found]                                     ` <4af2d03a0510101101n54ab0b1cvae177c3c992bf9a9@mail.gmail.com>
2005-10-10 18:28                                       ` Manu Abraham
     [not found]                             ` <3888a5cd0510100725k579809a9o374930df9988bfa3@mail.gmail.com>
2005-10-10 15:02                               ` Manu Abraham
     [not found]                           ` <4af2d03a0510100528y236a1246tfc56c08a78f072d5@mail.gmail.com>
2005-10-10 12:51                             ` Manu Abraham
  -- strict thread matches above, loose matches on Subject: below --
2010-08-28 12:17 pci driver Srinivas Mankan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4329362A.1030201@linuxtv.org \
    --to=manu@linuxtv.org \
    --cc=eike-kernel@sf-tec.de \
    --cc=jirislaby@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox