pcmcia bug ?

pcmcia bug ?

[janik holy]

Hello, i use slack 10.1, kernel 2.6.14-rc2-git7, i have orinoco silver pcmcia wifi card, i compile PCMCIA support into kernel, and orinoco, hermes, orinoco_cs as modules.... after booting loading modules, and run /etc/rc.d/rc.pcmcia i see message >= cardmgr no pcmcia in /proc/devices. after cat /proc/devices there is really no pcmcia. I really dont know what is it, on 2.6.11 with the same kernel conf, its works ok and pcmcia was in /proc/devices. So during i wont have pcmcia in /proc/devices i cant use cardctl and cardmgr ... any idea how to fix it ? where can be a problem ? thanks 


Aktivujte si neobmedzenu mailovu schranku na www.pobox.sk!

Re: pcmcia bug ?

[Jiri Slaby]

janik holy napsal(a):

>Hello, i use slack 10.1, kernel 2.6.14-rc2-git7, i have orinoco silver pcmcia wifi card, i compile PCMCIA support into kernel, and orinoco, hermes, orinoco_cs as modules.... after booting loading modules, and run /etc/rc.d/rc.pcmcia i see message >= cardmgr no pcmcia in /proc/devices. after cat /proc/devices there is really no pcmcia. I really dont know what is it, on 2.6.11 with the same kernel conf, its works ok and pcmcia was in /proc/devices. So during i wont have pcmcia in /proc/devices i cant use cardctl and cardmgr ... any idea how to fix it ? where can be a problem ? thanks 
>  
>
Compile yenta, pcmcia, hermes and hermes pcmcia into kernel. I know
about this problem, but I haven't had enough time to solve it.

regards,
--
Jiri Slaby         www.fi.muni.cz/~xslaby
~\-/~      jirislaby@gmail.com      ~\-/~
241B347EC88228DE51EE A49C4A73A25004CB2A10

Re: pcmcia bug ?

[Jiri Slaby]

janik holy napsal(a):
> Its dont work tho.... 
> 
> 
>>-----Pôvodná správa-----
>>Od: Jiri Slaby [mailto:jirislaby@gmail.com]
>>Odoslané: 29. septembra 2005 21:12
>>Komu: janik holy
>>Predmet: Re: pcmcia bug ?
>>
>>
>>janik holy napsal(a):
>>
>>
>>>Hello, i use slack 10.1, kernel 2.6.14-rc2-git7, i have orinoco silver pcmcia
>>>wifi card, i compile PCMCIA support into kernel, and orinoco, hermes, orinoco_cs
>>>as modules.... after booting loading modules, and run /etc/rc.d/rc.pcmcia i see
>>>message >= cardmgr no pcmcia in /proc/devices. after cat /proc/devices there is
>>>really no pcmcia. I really dont know what is it, on 2.6.11 with the same kernel
>>>conf, its works ok and pcmcia was in /proc/devices. So during i wont have pcmcia
>>>in /proc/devices i cant use cardctl and cardmgr ... any idea how to fix it ?
>>>where can be a problem ? thanks
>>>
>>>
>>
>>Compile yenta, pcmcia, hermes and hermes pcmcia into kernel. I know
>>about this problem, but I haven't had enough time to solve it.
Please, do not remove Ccs when replying.

In that case, boot the old kernel, do `dmesg -s 1000000 >old`, in the new `dmesg
-s 1000000 >new' and send `diff -u old new'.
Next, append .config and some hw info (model and so).
No mimes, if it is possible.

regards,
-- 
Jiri Slaby         www.fi.muni.cz/~xslaby
~\-/~      jirislaby@gmail.com      ~\-/~
241B347EC88228DE51EE A49C4A73A25004CB2A10

Re: pcmcia bug ?

[Jiri Slaby]

janik holy napsal(a):
> Stop solving things with this lame howto ... its code bug not .config and other stuff.
If you don't want to solve, don't do anything.

regards,
-- 
Jiri Slaby         www.fi.muni.cz/~xslaby
~\-/~      jirislaby@gmail.com      ~\-/~
241B347EC88228DE51EE A49C4A73A25004CB2A10