From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1750872AbVJMLCC (ORCPT ); Thu, 13 Oct 2005 07:02:02 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1750896AbVJMLCC (ORCPT ); Thu, 13 Oct 2005 07:02:02 -0400 Received: from ms004msg.fastwebnet.it ([213.140.2.58]:54436 "EHLO ms004msg.fastwebnet.it") by vger.kernel.org with ESMTP id S1750872AbVJMLCA convert rfc822-to-8bit (ORCPT ); Thu, 13 Oct 2005 07:02:00 -0400 Date: Thu, 13 Oct 2005 13:01:58 +0200 Message-ID: <434A520A000065D4@ms004msg.mail.fw> From: bergen@fastwebnet.it Subject: PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1 To: linux-kernel@vger.kernel.org MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7BIT Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hello all, I'm using an HP nc8230 Laptop with integrated TPM. Everything works with 2.6.12 kernel. If you need it I can provide the lspci report. Below you can find the dmesg report. Linux version 2.6.14-rc4 (root@dhcp56.verkstad.net) (gcc version 4.0.0 20050519 (Red Hat 4.0.0-8)) #2 Thu Oct 13 12:40:01 CEST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable) BIOS-e820: 000000003ffd0000 - 000000003ffefc00 (reserved) BIOS-e820: 000000003ffefc00 - 000000003fffb000 (ACPI NVS) BIOS-e820: 000000003fffb000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved) BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. On node 0 totalpages: 262096 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 32720 pages, LIFO batch:15 DMI 2.3 present. ACPI: RSDP (v000 HP ) @ 0x000fe270 ACPI: RSDT (v001 HP 0934 0x22070520 HP 0x00000001) @ 0x3ffefc84 ACPI: FADT (v002 HP 0934 0x00000002 HP 0x00000001) @ 0x3ffefc00 ACPI: MADT (v001 HP 0934 0x00000001 HP 0x00000001) @ 0x3ffefcb8 ACPI: MCFG (v001 HP 0934 0x00000001 HP 0x00000001) @ 0x3ffefd14 ACPI: SSDT (v001 HP HPQPpc 0x00001001 MSFT 0x0100000e) @ 0x3fff8120 ACPI: DSDT (v001 HP nc8200 0x00010000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) Built 1 zonelists Kernel command line: ro root=/dev/hda7 rhgb nofb Initializing CPU#0 CPU 0 irqstacks, hard=c052c000 soft=c052b000 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 1862.258 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1032804k/1048384k available (3236k kernel code, 14656k reserved, 821k data, 184k init, 130880k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3729.66 BogoMIPS (lpj=7459329) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. mtrr: v2.0 (20020519) CPU: Intel(R) Pentium(R) M processor 1.86GHz stepping 08 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: setting ELCR to 0200 (from 0c00) checking if image is initramfs... it is Freeing initrd memory: 983k freed softlockup thread 0 started up. NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=32 PCI: Using MMCONFIG ACPI: Subsystem revision 20050902 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [C003] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.C003] bus is 0 PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C054._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C069._PRT] ACPI: Power Resource [C1CC] (on) ACPI: Embedded Controller [C005] (gpe 16) ACPI: Power Resource [C1A6] (on) ACPI: Power Resource [C1AE] (on) ACPI: Power Resource [C1B5] (on) ACPI: Power Resource [C1C5] (on) ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0CE._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0DE._PRT] ACPI: PCI Interrupt Link [C0DA] (IRQs *10 11) ACPI: PCI Interrupt Link [C0DB] (IRQs 10 *11) ACPI: PCI Interrupt Link [C0DC] (IRQs 10 *11) ACPI: PCI Interrupt Link [C0DD] (IRQs *10 11) ACPI: PCI Interrupt Link [C0F0] (IRQs *10 11) ACPI: PCI Interrupt Link [C0F1] (IRQs 10 *11) ACPI: PCI Interrupt Link [C0F2] (IRQs *10 11) ACPI: Power Resource [C268] (off) ACPI: Power Resource [C269] (off) ACPI: Power Resource [C26A] (off) ACPI: Power Resource [C26B] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 16 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1 PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1 PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1 pnp: 00:0d: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:0d: ioport range 0x1000-0x107f could not be reserved pnp: 00:0d: ioport range 0x1100-0x113f has been reserved pnp: 00:0d: ioport range 0x1200-0x121f has been reserved PCI: Bridge: 0000:00:01.0 IO window: 2000-2fff MEM window: c8800000-c8bfffff PREFETCH window: c0000000-c7ffffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: c8000000-c83fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bus 3, cardbus bridge: 0000:02:06.0 IO window: 00004000-00004fff IO window: 00005000-00005fff PREFETCH window: 50000000-51ffffff MEM window: 52000000-53ffffff PCI: Bridge: 0000:00:1e.0 IO window: 4000-5fff MEM window: c8400000-c87fffff PREFETCH window: 50000000-51ffffff ACPI: PCI Interrupt Link [C0DA] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [C0DA] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [C0DA] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Device 0000:00:1c.1 not available because of resource collisions PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt Link [C0DC] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [C0DC] -> GSI 11 (level, low) -> IRQ 11 apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1129208089.096:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) JFS: nTxBlock = 8080, nTxLock = 64645 SGI XFS with ACLs, security attributes, large block numbers, no debug enabled SGI XFS Quota Management subsystem SELinux: Registering netfilter hooks Initializing Cryptographic API pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [C0DA] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie03] ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [C0DA] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie02] Allocate Port Service[pcie03] PCI: Device 0000:00:1c.1 not available because of resource collisions ACPI: Fan [C26C] (off) ACPI: Fan [C26D] (off) ACPI: Fan [C26E] (off) ACPI: Fan [C26F] (off) ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [C001] (supports 8 throttling states) ACPI: Thermal Zone [TZ1] (53 C) ACPI: Thermal Zone [TZ2] (53 C) ACPI: Thermal Zone [TZ3] (33 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 915GM Chipset. agpgart: AGP aperture is 256M @ 0x0 tpm_inf 0000:00:1f.0: LPC-bus found at 0x2641 tpm_inf_pnp 00:05: Found C1B7 with ID IFX0101 tpm_inf 0000:00:1f.0: No Infineon TPM found! pnp: Device 00:05 does not supported disabling. PNP: PS/2 Controller [PNP0303:C1C2,PNP0f13:C1C3] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 32 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS2 at I/O 0x3e8 (irq = 3) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt Link [C0F2] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:1e.3[B] -> Link [C0F2] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt for device 0000:00:1e.3 disabled io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH6: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [C0DA] -> GSI 10 (level, low) -> IRQ 10 ICH6: chipset revision 3 ICH6: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x3580-0x3587, BIOS settings: hda:DMA, hdb:DMA Probing IDE interface ide0... hda: FUJITSU MHV2060AH, ATA DISK drive hdb: UJDA765aDVD/CDRW, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hda: max request size: 128KiB hda: 117210240 sectors (60011 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 > hdb: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, (U)DMA Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver mice: PS/2 mouse device common for all mice md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 3.39 NET: Registered protocol family 2 input: AT Translated Set 2 keyboard on isa0060/serio0 IP route cache hash table entries: 65536 (order: 6, 262144 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1310720 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode ACPI wakeup devices: C069 C0CE C1CD C0DE C1D0 ACPI: (supports S0 S3 S4 S5) Freeing unused kernel memory: 184k freed kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa44793/0x300000 serio: Synaptics pass-through port at isa0060/serio4/input0 input: SynPS/2 Synaptics TouchPad on isa0060/serio4 security: 3 users, 6 roles, 764 types, 87 bools security: 55 classes, 182383 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev hda7, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), not configured for labeling SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured for labeling SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts SELinux: initialized (dev inotifyfs, type inotifyfs), not configured for labeling SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts Floppy drive(s): fd0 is 1.44M input: PS/2 Generic Mouse on synaptics-pt/serio0 floppy0: no floppy controllers found tg3.c:v3.42 (Oct 3, 2005) ACPI: PCI Interrupt 0000:10:00.0[A] -> Link [C0DA] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:10:00.0 to 64 eth0: Tigon3 [partno(BCM95751M) rev 4101 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:14:38:16:2b:59 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76180000] ieee80211_crypt: registered algorithm 'NULL' ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.0 ipw2200: Copyright(c) 2003-2004 Intel Corporation ACPI: PCI Interrupt Link [C0F1] enabled at IRQ 11 ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [C0F1] -> GSI 11 (level, low) -> IRQ 11 ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection ipw2200: Radio Frequency Kill Switch is On: Kill switch must be turned off for wireless networking to work. ACPI: PCI Interrupt 0000:00:1e.2[A] -> Link [C0F1] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1e.2 to 64 intel8x0_measure_ac97_clock: measured 55502 usecs intel8x0: clocking to 48000 ACPI: PCI Interrupt 0000:00:1e.3[B] -> Link [C0F2] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1e.3 to 64 hw_random: RNG not detected shpchp: acpi_shpchprm:\_SB_.C003 evaluate _BBN fail=0x5 shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5 shpchp: acpi_shpchprm:\_SB_.C003 evaluate _BBN fail=0x5 shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5 shpchp: acpi_shpchprm:\_SB_.C003 evaluate _BBN fail=0x5 shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5 ACPI: PCI Interrupt Link [C0F0] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [C0F0] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: irq 10, io mem 0xc8c00000 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [C0F0] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 10, io base 0x00003000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [C0DB] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [C0DB] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 11, io base 0x00003020 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [C0DC] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 11, io base 0x00003040 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [C0DC] -> GSI 11 (level, low) -> IRQ 11 Yenta: CardBus bridge found at 0000:02:06.0 [103c:0934] Yenta: Enabling burst memory read transactions Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:06.0, mfunc 0x01111b22, devctl 0x64 Yenta: ISA IRQ mask 0x00f8, PCI irq 11 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0x4000 - 0x5fff cs: IO port probe 0x4000-0x5fff: clean. pcmcia: parent PCI bridge Memory window: 0xc8400000 - 0xc87fffff pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x51ffffff ieee1394: Initialized config rom entry `ip1394' ohci1394: $Rev: 1313 $ Ben Collins ACPI: PCI Interrupt 0000:02:06.2[C] -> Link [C0F2] -> GSI 10 (level, low) -> IRQ 10 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[c8402000-c84027ff] Max Packet=[2048] SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts ieee1394: Host added: ID:BUS[0-00:1023] GUID[a55a574700508b71] NET: Registered protocol family 10 Disabled Privacy Extensions on device c04add00(lo) IPv6 over IPv4 tunneling driver ACPI: AC Adapter [C173] (on-line) ACPI: Battery Slot [C175] (battery present) ACPI: Battery Slot [C174] (battery absent) ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [C1EE] ACPI: Lid Switch [C1EF] ibm_acpi: ec object not found ACPI: Video Device [C0FA] (multi-head: yes rom: no post: no) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com hdb: packet command error: status=0x51 { DriveReady SeekComplete Error } hdb: packet command error: error=0x50 { LastFailedSense=0x05 } ide: failed opcode was: unknown cdrom: open failed. hdb: packet command error: status=0x51 { DriveReady SeekComplete Error } hdb: packet command error: error=0x50 { LastFailedSense=0x05 } ide: failed opcode was: unknown cdrom: open failed. audit(1129200913.115:2): avc: denied { write } for pid=1667 comm="fsck" name="rhgb-console" dev=ramfs ino=5419 scontext=system_u:system_r:fsadm_t tcontext=system_u:object_r:ramfs_t tclass=fifo_file audit(1129200913.403:3): avc: denied { getattr } for pid=1670 comm="fsck.reiserfs" name="usbdev2.1" dev=tmpfs ino=5229 scontext=system_u:system_r:fsadm_t tcontext=system_u:object_r:device_t tclass=chr_file EXT3 FS on hda7, internal journal SELinux: initialized (dev hda3, type ext2), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs ReiserFS: hda5: found reiserfs format "3.6" with standard journal ReiserFS: hda5: using ordered data mode ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda5: checking transaction log (hda5) ReiserFS: hda5: Using r5 hash to sort names SELinux: initialized (dev hda5, type reiserfs), uses xattr Adding 2010952k swap on /dev/hda2. Priority:-1 extents:1 across:2010952k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.3 (8190 buckets, 65520 max) - 256 bytes per conntrack pcmcia: Detected deprecated PCMCIA ioctl usage. pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff cs: IO port probe 0x800-0x8ff: clean. cs: IO port probe 0x100-0x4ff: excluding 0x378-0x37f cs: IO port probe 0xa00-0xaff: clean. tg3: eth0: Link is up at 10 Mbps, half duplex. tg3: eth0: Flow control is off for TX and off for RX. SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts Bluetooth: Core ver 2.7 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.7 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM ver 1.5 Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized i2c /dev entries driver SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). lp0: console ready eth0: no IPv6 routers present eth1 (WE) : Driver using old /proc/net/wireless support, please fix driver ! eth1 (WE) : Driver using old /proc/net/wireless support, please fix driver !