public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Michael Krufky <mkrufky@m1k.net>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-kernel@vger.kernel.org, linux-dvb-maintainer@linuxtv.org
Subject: [PATCH 25/37] dvb: dst: protect dst_write_tuna from simultaneous writes
Date: Tue, 01 Nov 2005 03:15:14 -0500	[thread overview]
Message-ID: <43672412.3080007@m1k.net> (raw)

[-- Attachment #1: Type: text/plain, Size: 2 bytes --]




[-- Attachment #2: 2399.patch --]
[-- Type: text/x-patch, Size: 2787 bytes --]

From: Henrik Sjoberg <henke@epact.se>

-dst_write_tuna needs to be protected against simultaeneous writes, just like dst_command

Signed-off-by: Henrik Sjoberg <henke@epact.se>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>

 drivers/media/dvb/bt8xx/dst.c |   31 ++++++++++++++++++-------------
 1 file changed, 18 insertions(+), 13 deletions(-)

--- linux-2.6.14-git3.orig/drivers/media/dvb/bt8xx/dst.c
+++ linux-2.6.14-git3/drivers/media/dvb/bt8xx/dst.c
@@ -1077,7 +1077,7 @@
 		return 0;
 	state->diseq_flags &= ~(HAS_LOCK);
 	if (!dst_wait_dst_ready(state, NO_DELAY))
-		return 0;
+		return -EIO;
 	if (state->type_flags & DST_TYPE_HAS_NEWTUNE)
 		/* how to get variable length reply ???? */
 		retval = read_dst(state, state->rx_tuna, 10);
@@ -1085,22 +1085,21 @@
 		retval = read_dst(state, &state->rx_tuna[2], FIXED_COMM);
 	if (retval < 0) {
 		dprintk(verbose, DST_DEBUG, 1, "read not successful");
-		return 0;
+		return retval;
 	}
 	if (state->type_flags & DST_TYPE_HAS_NEWTUNE) {
 		if (state->rx_tuna[9] != dst_check_sum(&state->rx_tuna[0], 9)) {
 			dprintk(verbose, DST_INFO, 1, "checksum failure ? ");
-			return 0;
+			return -EIO;
 		}
 	} else {
 		if (state->rx_tuna[9] != dst_check_sum(&state->rx_tuna[2], 7)) {
 			dprintk(verbose, DST_INFO, 1, "checksum failure? ");
-			return 0;
+			return -EIO;
 		}
 	}
 	if (state->rx_tuna[2] == 0 && state->rx_tuna[3] == 0)
 		return 0;
-
 	if (state->dst_type == DST_TYPE_IS_SAT) {
 		state->decode_freq = ((state->rx_tuna[2] & 0x7f) << 8) + state->rx_tuna[3];
 	} else {
@@ -1129,10 +1128,10 @@
 			dst_set_voltage(fe, SEC_VOLTAGE_13);
 	}
 	state->diseq_flags &= ~(HAS_LOCK | ATTEMPT_TUNE);
-
+	down(&state->dst_mutex);
 	if ((dst_comm_init(state)) < 0) {
 		dprintk(verbose, DST_DEBUG, 1, "DST Communication initialization failed.");
-		return -1;
+		goto error;
 	}
 	if (state->type_flags & DST_TYPE_HAS_NEWTUNE) {
 		state->tx_tuna[9] = dst_check_sum(&state->tx_tuna[0], 9);
@@ -1144,23 +1143,29 @@
 	if (retval < 0) {
 		dst_pio_disable(state);
 		dprintk(verbose, DST_DEBUG, 1, "write not successful");
-		return retval;
+		goto werr;
 	}
 	if ((dst_pio_disable(state)) < 0) {
 		dprintk(verbose, DST_DEBUG, 1, "DST PIO disable failed !");
-		return -1;
+		goto error;
 	}
 	if ((read_dst(state, &reply, GET_ACK) < 0)) {
 		dprintk(verbose, DST_DEBUG, 1, "read verify not successful.");
-		return -1;
+		goto error;
 	}
 	if (reply != ACK) {
 		dprintk(verbose, DST_DEBUG, 1, "write not acknowledged 0x%02x ", reply);
-		return 0;
+		goto error;
 	}
 	state->diseq_flags |= ATTEMPT_TUNE;
-
-	return dst_get_tuna(state);
+	retval = dst_get_tuna(state);
+werr:
+	up(&state->dst_mutex);
+	return retval;
+
+error:
+	up(&state->dst_mutex);
+	return -EIO;
 }
 
 /*




                 reply	other threads:[~2005-11-01  8:20 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=43672412.3080007@m1k.net \
    --to=mkrufky@m1k.net \
    --cc=akpm@osdl.org \
    --cc=linux-dvb-maintainer@linuxtv.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox