Fix BCD value errors when month=9, moving the increment inside the
BIN2BCD macro.
Fix similar code for the weekday value, just for consistency.

This bug was reported by Michael Burian <dynmail1@gassner-waagen.at>.

Signed-off-by: James Chapman <jchapman@katalix.com>

Index: linux-2.6.14/drivers/i2c/chips/ds1337.c
===================================================================
--- linux-2.6.14.orig/drivers/i2c/chips/ds1337.c	2005-11-02 19:38:49.000000000 +0000
+++ linux-2.6.14/drivers/i2c/chips/ds1337.c	2005-11-02 19:38:58.000000000 +0000
@@ -177,9 +177,9 @@
 	buf[1] = BIN2BCD(dt->tm_sec);
 	buf[2] = BIN2BCD(dt->tm_min);
 	buf[3] = BIN2BCD(dt->tm_hour);
-	buf[4] = BIN2BCD(dt->tm_wday) + 1;
+	buf[4] = BIN2BCD(dt->tm_wday + 1);
 	buf[5] = BIN2BCD(dt->tm_mday);
-	buf[6] = BIN2BCD(dt->tm_mon) + 1;
+	buf[6] = BIN2BCD(dt->tm_mon + 1);
 	val = dt->tm_year;
 	if (val >= 100) {
 		val -= 100;