From: Frank Overton <frank@discoverycenters.org>
To: linux-kernel@vger.kernel.org
Subject: 2.6 series kernels panic on boot at PCI probe with 450nx
Date: Fri, 04 Nov 2005 16:07:23 -0800 [thread overview]
Message-ID: <436BF7BB.9070900@discoverycenters.org> (raw)
[1.] 2.6 series kernels panic on boot at PCI probe with 450nx (2.4.x kernels boot without hitch)
[2.] System: HP Netserver LH4s
[3.] Keywords: kernel, i450nx, PCI probe, boot, panic
[4.] Kernel version: 2.6.9-22, 2.6.9-11 by me and (2.6.6, 2.6.7 by Andrew Feldhacker)
[7.7.] For an additional example see: Andrew Feldhacker's June 2004 report at http://uwsg.ucs.indiana.edu/hypermail/linux/kernel/0407.0/0915.html
[X.] Other notes:
-Someone reported that Mandrake 10.2 beta did not have this problem.
-I know the legacy megaraid now requires a custom built kernel. I just can't get past the PCI-Probe to install it.
[7.] Environment
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 550.045
cache size : 512 KB
physical id : 0
siblings : 1
runqueue : 0
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 1097.72
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 550.045
cache size : 512 KB
physical id : 0
siblings : 1
runqueue : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 1097.72
processor : 2
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 550.045
cache size : 512 KB
physical id : 0
siblings : 1
runqueue : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 1097.72
processor : 3
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 550.045
cache size : 512 KB
physical id : 0
siblings : 1
runqueue : 3
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 1097.72
[7.3.] Module information (from /proc/modules):
ide-cd 34016 0 (autoclean)
cdrom 32896 0 (autoclean) [ide-cd]
qla2100 287804 5
iptable_filter 2412 0 (autoclean) (unused)
ip_tables 16544 1 [iptable_filter]
softdog 3004 1
usbserial 23964 0 (autoclean) (unused)
parport_pc 18884 1 (autoclean)
lp 9156 0 (autoclean)
parport 38848 1 (autoclean) [parport_pc lp]
autofs4 16984 0 (autoclean) (unused)
lock_gulm 65712 1
crc32 3764 0 [lock_gulm]
gfs 291308 1 (autoclean)
lock_harness 3576 0 (autoclean) [lock_gulm gfs]
pool 84928 4
natsemi 20000 1
e100 60048 1
floppy 57552 0 (autoclean)
sg 37388 0 (autoclean)
microcode 6912 0 (autoclean)
keybdev 2976 0 (unused)
mousedev 5688 1
hid 22308 0 (unused)
input 6176 0 [keybdev mousedev hid]
usbcore 81152 1 [usbserial hid]
ext3 89992 2
jbd 55092 2 [ext3]
megaraid 30636 3
sd_mod 13936 16
scsi_mod 115240 3 [qla2100 sg megaraid sd_mod]
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
1040-105f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
1400-14ff : LSI Logic / Symbios Logic 53c895
8000-803f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
9000-901f : Intel Corp. 82371AB/EB/MB PIIX4 USB
9020-902f : Intel Corp. 82371AB/EB/MB PIIX4 IDE
9020-9027 : ide0
a000-afff : PCI Bus #01
a000-a0ff : LSI Logic / Symbios Logic 53c895 (#2)
b000-bfff : PCI Bus #02
b000-b0ff : National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
b000-b0ff : eth1
b400-b4ff : QLogic Corp. QLA2100 64-bit Fibre Channel Adapter
b400-b4ff : qla2100
b800-b81f : Intel Corp. 82557/8/9 [Ethernet Pro 100]
b800-b81f : e100
iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000c8000-000c87ff : Extension ROM
000c8800-000c97ff : Extension ROM
000c9800-000c9fff : Extension ROM
000f0000-000fffff : System ROM
00100000-e7feffff : System RAM
00100000-002aba6e : Kernel code
002aba6f-003efb27 : Kernel data
e7ff0000-e7fffbff : ACPI Tables
e7fffc00-e7ffffff : ACPI Non-volatile Storage
e8000000-e8007fff : Hewlett-Packard Company NetServer Smart IRQ Router
e8008000-e8008fff : Cirrus Logic GD 5446
e8009000-e80090ff : LSI Logic / Symbios Logic 53c895
e800a000-e800afff : LSI Logic / Symbios Logic 53c895
e8100000-e81fffff : PCI Bus #01
e8100000-e8100fff : LSI Logic / Symbios Logic 53c895 (#2)
e8101000-e81010ff : LSI Logic / Symbios Logic 53c895 (#2)
e8200000-e83fffff : PCI Bus #02
e8200000-e82fffff : Intel Corp. 82557/8/9 [Ethernet Pro 100]
e8200000-e82fffff : e100
e8300000-e8300fff : National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
e8300000-e8300fff : eth1
e8301000-e8301fff : QLogic Corp. QLA2100 64-bit Fibre Channel Adapter
e8301000-e8301fff : qla2100
ea000000-ebffffff : Cirrus Logic GD 5446
f0000000-f7ffffff : Intel Corp. 80960RP [i960RP Microprocessor]
f0000000-f000007f : MegaRAID: LSI Logic Corporation
f8000000-f80fffff : PCI Bus #02
f8000000-f8000fff : Intel Corp. 82557/8/9 [Ethernet Pro 100]
f8000000-f8000fff : e100
fec00000-fec0ffff : reserved
fee00000-fee00fff : reserved
fffe8800-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root)
> 00:02.0 PCI bridge: Intel Corp. 80960RP [i960 RP
> Microprocessor/Bridge] (rev 03) (prog-if 00 [Normal decode]) Control:
> I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping-
> SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, cache line size
> 08 Bus: primary=00, secondary=01, subordinate=01, sec-latency=248 I/O
> behind bridge: 0000a000-0000afff Memory behind bridge:
> e8100000-e81fffff Prefetchable memory behind bridge: fff00000-000fffff
> BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- 00:02.1
> I2O: Intel Corp. 80960RP [i960RP Microprocessor] (rev 03) (prog-if 01)
> Subsystem: Hewlett-Packard Company MegaRAID T5, Integrated HP NetRAID
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
> Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64,
> cache line size 08 Interrupt: pin A routed to IRQ 10 BIST result: 00
> Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
> Expansion ROM at <unassigned> [disabled] [size=32K] 00:03.0 PCI
> bridge: Digital Equipment Corporation DECchip 21152 (rev 02) (prog-if
> 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
> VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF-
> FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
> <PERR- Latency: 64, cache line size 08 Bus: primary=00, secondary=02,
> subordinate=02, sec-latency=234 I/O behind bridge: 0000b000-0000bfff
> Memory behind bridge: e8200000-e83fffff Prefetchable memory behind
> bridge: 00000000f8000000-00000000f8000000 BridgeCtl: Parity+ SERR+
> NoISA+ VGA- MAbort- >Reset- FastB2B- 00:06.0 System peripheral:
> Hewlett-Packard Company NetServer Smart IRQ Router (rev a0) Subsystem:
> Hewlett-Packard Company: Unknown device 0001 Control: I/O- Mem+
> BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+
> FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- Region 0: Memory at e8000000
> (32-bit, non-prefetchable) [size=32K] 00:08.0 VGA compatible
> controller: Cirrus Logic GD 5446 (rev 45) (prog-if 00 [VGA])
> Subsystem: Hewlett-Packard Company: Unknown device 0001 Control: I/O+
> Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
> FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- Region 0: Memory at ea000000
> (32-bit, prefetchable) [size=32M] Region 1: Memory at e8008000
> (32-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned>
> [disabled] [size=32K] 00:0f.0 ISA bridge: Intel Corp. 82371AB/EB/MB
> PIIX4 ISA (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV-
> VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF-
> FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
> <PERR- Latency: 0 00:0f.1 IDE interface: Intel Corp. 82371AB/EB/MB
> PIIX4 IDE (rev 01) (prog-if 80 [Master]) Control: I/O+ Mem- BusMaster+
> SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status:
> Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- Latency: 64 Region 4: I/O ports at 9020
> [size=16] 00:0f.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB
> (rev 01) (prog-if 00 [UHCI]) Control: I/O+ Mem- BusMaster- SpecCycle-
> MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap-
> 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort-
> >SERR- <PERR- Interrupt: pin D routed to IRQ 0 Region 4: I/O ports at
> 9000 [size=32] 00:0f.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI
> (rev 02) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+
> ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Interrupt: pin ? routed to IRQ 9 00:10.0 Host bridge: Intel Corp.
> 450NX - 82451NX Memory & I/O Controller (rev 03) Control: I/O- Mem-
> BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
> FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:12.0 Host bridge: Intel
> Corp. 450NX - 82454NX/84460GX PCI Expander Bridge (rev 02) Control:
> I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping-
> SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 72, cache line size
> 08 01:07.0 SCSI storage controller: LSI Logic / Symbios Logic 53c895
> (rev 01) Subsystem: Hewlett-Packard Company: Unknown device 1000
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
> Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 247
> (7500ns min, 16000ns max), cache line size 08 Interrupt: pin A routed
> to IRQ 11 Region 0: I/O ports at 1400 [size=256] Region 1: Memory at
> e8009000 (32-bit, non-prefetchable) [size=256] Region 2: Memory at
> e800a000 (32-bit, non-prefetchable) [size=4K] 01:07.0 SCSI storage
> controller: LSI Logic / Symbios Logic 53c895 (rev 01) Subsystem:
> Hewlett-Packard Company: Unknown device 1000 Control: I/O+ Mem+
> BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+
> FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 247 (7500ns min,
> 16000ns max), cache line size 08 Interrupt: pin A routed to IRQ 11
> Region 0: I/O ports at a000 [size=256] Region 1: Memory at e8101000
> (32-bit, non-prefetchable) [size=256] Region 2: Memory at e8100000
> (32-bit, non-prefetchable) [size=4K] 02:02.0 Ethernet controller:
> Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 05) Subsystem:
> Hewlett-Packard Company NetServer 10/100TX Control: I/O+ Mem+
> BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+
> FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 66 (2000ns min,
> 14000ns max), cache line size 08 Interrupt: pin A routed to IRQ 15
> Region 0: Memory at f8000000 (32-bit, prefetchable) [size=4K] Region
> 1: I/O ports at b800 [size=32] Region 2: Memory at e8200000 (32-bit,
> non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled]
> [size=1M] Capabilities: [dc] Power Management version 1 Flags: PMEClk-
> DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0
> PME-Enable- DSel=0 DScale=0 PME- 02:03.0 Ethernet controller: National
> Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
> Subsystem: Netgear FA311 / FA312 (FA311 with WoL HW) Control: I/O+
> Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+
> FastB2B+ Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 90 (2750ns min,
> 13000ns max) Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at
> b000 [size=256] Region 1: Memory at e8300000 (32-bit,
> non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled]
> [size=64K] Capabilities: [40] Power Management version 2 Flags:
> PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME+ 02:04.0 SCSI storage
> controller: QLogic Corp. QLA2100 64-bit Fibre Channel Adapter (rev 03)
> Subsystem: QLogic Corp. QLA2100 64-bit Fibre Channel Adapter Control:
> I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping-
> SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, cache line size
> 08 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at b400
> [size=256] Region 1: Memory at e8301000 (32-bit, non-prefetchable)
> [size=4K] Expansion ROM at <unassigned> [disabled] [size=64K]
[7.6.] SCSI information (from /proc/scsi/scsi)
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: MegaRAID Model: LD0 RAID1 8677R Rev: D
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 00 Lun: 00
Vendor: HP Model: FCArray 5_104196 Rev: 5549
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 00 Lun: 01
Vendor: HP Model: FCArray 5_69464 Rev: 5549
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 00 Lun: 02
Vendor: HP Model: FCArray 5_104196 Rev: 5549
Type: Direct-Access ANSI SCSI revision: 02
next reply other threads:[~2005-11-05 0:07 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-11-05 0:07 Frank Overton [this message]
2005-11-05 4:30 ` 2.6 series kernels panic on boot at PCI probe with 450nx Greg KH
2005-11-07 17:27 ` Frank Overton
2005-11-07 18:22 ` Greg KH
2005-11-07 19:07 ` Arjan van de Ven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=436BF7BB.9070900@discoverycenters.org \
--to=frank@discoverycenters.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox