* ide: failed opcode errors, thousands of them, 2.6.13-15
@ 2005-11-14 7:49 Bryce Nesbitt
2005-11-15 16:46 ` Bartlomiej Zolnierkiewicz
0 siblings, 1 reply; 3+ messages in thread
From: Bryce Nesbitt @ 2005-11-14 7:49 UTC (permalink / raw)
To: linux-kernel
This is using a SUSE Linux 10.0 build. I installed a new DVD burner,
and now get 1 error per second in
the kernel ring buffer:
Nov 13 23:31:18 linux kernel: hdc: packet command error: status=0x51 {
DriveReady SeekComplete Error }
Nov 13 23:31:18 linux kernel: hdc: packet command error: error=0x54 {
AbortedCommand LastFailedSense=0x05 }
Nov 13 23:31:18 linux kernel: ide: failed opcode was: unknown
Nov 13 23:31:19 linux udevd[2297]: get_netlink_msg: no ACTION in payload
found, skip event 'mount'
Nov 13 23:31:19 linux kernel: ISO 9660 Extensions: Microsoft Joliet Level 3
Nov 13 23:31:19 linux kernel: ISO 9660 Extensions: RRIP_1991A
Nov 13 23:31:19 linux kernel: hdc: packet command error: status=0x51 {
DriveReady SeekComplete Error }
Nov 13 23:31:19 linux kernel: hdc: packet command error: error=0x54 {
AbortedCommand LastFailedSense=0x05 }
Nov 13 23:31:19 linux kernel: ide: failed opcode was: unknown
Nov 13 23:31:20 linux kernel: hdc: packet command error: status=0x51 {
DriveReady SeekComplete Error }
Nov 13 23:31:20 linux kernel: hdc: packet command error: error=0x54 {
AbortedCommand LastFailedSense=0x05 }
Nov 13 23:31:20 linux kernel: ide: failed opcode was: unknown
This is similar to report:
http://lkml.org/lkml/2005/9/21/300 DMA broken in mainline 2.6.13.2
_AND_ opensuse vendor 2.6.13-15
Like the first reporter, I also have a LITEON SOHW-1693S DVD burner.
Curiously enough mine works fine (burns and reads DVD's just fine).
DMA on or DMA off makes no difference.
Note the HDIO_GETGEO error below.
Is there anything else I can probe to help track down this issue?
linux:/home/bryce # lspci
...
00:04.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
linux:/home/bryce # hdparm /dev/hdc
/dev/hdc:
IO_support = 1 (32-bit)
unmaskirq = 1 (on)
using_dma = 0 (off)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
HDIO_GETGEO failed: Invalid argument
linux:/home/bryce # hdparm -iI /dev/hdc
/dev/hdc:
Model=LITE-ON DVDRW SOHW-1693S, FwRev=KS0B, SerialNo=
Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic }
RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0
BuffType=unknown, BuffSize=0kB, MaxMultSect=0
(maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0
IORDY=yes, tPIO={min:227,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2
AdvancedPM=no
Drive conforms to: device does not report version:
* signifies the current active mode
ATAPI CD-ROM, with removable media
Model Number: LITE-ON DVDRW SOHW-1693S
Serial Number:
Firmware Revision: KS0B
Standards:
Used: ATAPI for CD-ROMs, SFF-8020i, r2.5
Supported: CD-ROM ATAPI-2
Configuration:
DRQ response: 50us.
Packet size: 12 bytes
Capabilities:
LBA, IORDY(cannot be disabled)
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 *udma4
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=227ns IORDY flow control=120ns
linux:/home/bryce # uname -a
Linux linux 2.6.13-15-default #1 Tue Sep 13 14:56:15 UTC 2005 i686
athlon i386 GNU/Linux
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: ide: failed opcode errors, thousands of them, 2.6.13-15
2005-11-14 7:49 ide: failed opcode errors, thousands of them, 2.6.13-15 Bryce Nesbitt
@ 2005-11-15 16:46 ` Bartlomiej Zolnierkiewicz
2005-11-15 20:59 ` Bartlomiej Zolnierkiewicz
0 siblings, 1 reply; 3+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2005-11-15 16:46 UTC (permalink / raw)
To: Bryce Nesbitt; +Cc: linux-kernel
On 11/14/05, Bryce Nesbitt <bryce1@obviously.com> wrote:
> This is using a SUSE Linux 10.0 build. I installed a new DVD burner,
> and now get 1 error per second in
> the kernel ring buffer:
>
> Nov 13 23:31:18 linux kernel: hdc: packet command error: status=0x51 {
> DriveReady SeekComplete Error }
> Nov 13 23:31:18 linux kernel: hdc: packet command error: error=0x54 {
> AbortedCommand LastFailedSense=0x05 }
> Nov 13 23:31:18 linux kernel: ide: failed opcode was: unknown
> Nov 13 23:31:19 linux udevd[2297]: get_netlink_msg: no ACTION in payload
> found, skip event 'mount'
> Nov 13 23:31:19 linux kernel: ISO 9660 Extensions: Microsoft Joliet Level 3
> Nov 13 23:31:19 linux kernel: ISO 9660 Extensions: RRIP_1991A
> Nov 13 23:31:19 linux kernel: hdc: packet command error: status=0x51 {
> DriveReady SeekComplete Error }
> Nov 13 23:31:19 linux kernel: hdc: packet command error: error=0x54 {
> AbortedCommand LastFailedSense=0x05 }
> Nov 13 23:31:19 linux kernel: ide: failed opcode was: unknown
> Nov 13 23:31:20 linux kernel: hdc: packet command error: status=0x51 {
> DriveReady SeekComplete Error }
> Nov 13 23:31:20 linux kernel: hdc: packet command error: error=0x54 {
> AbortedCommand LastFailedSense=0x05 }
> Nov 13 23:31:20 linux kernel: ide: failed opcode was: unknown
>
> This is similar to report:
> http://lkml.org/lkml/2005/9/21/300 DMA broken in mainline 2.6.13.2
> _AND_ opensuse vendor 2.6.13-15
>
>
> Like the first reporter, I also have a LITEON SOHW-1693S DVD burner.
> Curiously enough mine works fine (burns and reads DVD's just fine).
> DMA on or DMA off makes no difference.
> Note the HDIO_GETGEO error below.
> Is there anything else I can probe to help track down this issue?
Try latest _vanilla_ kernel (2.6.15-rc1), if it still doesn't work
please fill the bug on http://bugme.osdl.org.
> linux:/home/bryce # lspci
> ...
> 00:04.1 IDE interface: VIA Technologies, Inc.
> VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
>
> linux:/home/bryce # hdparm /dev/hdc
> /dev/hdc:
> IO_support = 1 (32-bit)
> unmaskirq = 1 (on)
> using_dma = 0 (off)
> keepsettings = 0 (off)
> readonly = 0 (off)
> readahead = 256 (on)
> HDIO_GETGEO failed: Invalid argument
>
> linux:/home/bryce # hdparm -iI /dev/hdc
>
> /dev/hdc:
>
> Model=LITE-ON DVDRW SOHW-1693S, FwRev=KS0B, SerialNo=
> Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic }
> RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0
> BuffType=unknown, BuffSize=0kB, MaxMultSect=0
> (maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0
> IORDY=yes, tPIO={min:227,w/IORDY:120}, tDMA={min:120,rec:120}
> PIO modes: pio0 pio1 pio2 pio3 pio4
> DMA modes: mdma0 mdma1 mdma2
> UDMA modes: udma0 udma1 udma2
> AdvancedPM=no
> Drive conforms to: device does not report version:
>
> * signifies the current active mode
>
>
> ATAPI CD-ROM, with removable media
> Model Number: LITE-ON DVDRW SOHW-1693S
> Serial Number:
> Firmware Revision: KS0B
> Standards:
> Used: ATAPI for CD-ROMs, SFF-8020i, r2.5
> Supported: CD-ROM ATAPI-2
> Configuration:
> DRQ response: 50us.
> Packet size: 12 bytes
> Capabilities:
> LBA, IORDY(cannot be disabled)
> DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 *udma4
> Cycle time: min=120ns recommended=120ns
> PIO: pio0 pio1 pio2 pio3 pio4
> Cycle time: no flow control=227ns IORDY flow control=120ns
>
> linux:/home/bryce # uname -a
> Linux linux 2.6.13-15-default #1 Tue Sep 13 14:56:15 UTC 2005 i686
> athlon i386 GNU/Linux
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: ide: failed opcode errors, thousands of them, 2.6.13-15
2005-11-15 16:46 ` Bartlomiej Zolnierkiewicz
@ 2005-11-15 20:59 ` Bartlomiej Zolnierkiewicz
0 siblings, 0 replies; 3+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2005-11-15 20:59 UTC (permalink / raw)
To: Bryce Nesbitt; +Cc: linux-kernel
On 11/15/05, Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> wrote:
> On 11/14/05, Bryce Nesbitt <bryce1@obviously.com> wrote:
> > This is using a SUSE Linux 10.0 build. I installed a new DVD burner,
> > and now get 1 error per second in
> > the kernel ring buffer:
> >
> > Nov 13 23:31:18 linux kernel: hdc: packet command error: status=0x51 {
> > DriveReady SeekComplete Error }
> > Nov 13 23:31:18 linux kernel: hdc: packet command error: error=0x54 {
> > AbortedCommand LastFailedSense=0x05 }
> > Nov 13 23:31:18 linux kernel: ide: failed opcode was: unknown
> > Nov 13 23:31:19 linux udevd[2297]: get_netlink_msg: no ACTION in payload
> > found, skip event 'mount'
> > Nov 13 23:31:19 linux kernel: ISO 9660 Extensions: Microsoft Joliet Level 3
> > Nov 13 23:31:19 linux kernel: ISO 9660 Extensions: RRIP_1991A
> > Nov 13 23:31:19 linux kernel: hdc: packet command error: status=0x51 {
> > DriveReady SeekComplete Error }
> > Nov 13 23:31:19 linux kernel: hdc: packet command error: error=0x54 {
> > AbortedCommand LastFailedSense=0x05 }
> > Nov 13 23:31:19 linux kernel: ide: failed opcode was: unknown
> > Nov 13 23:31:20 linux kernel: hdc: packet command error: status=0x51 {
> > DriveReady SeekComplete Error }
> > Nov 13 23:31:20 linux kernel: hdc: packet command error: error=0x54 {
> > AbortedCommand LastFailedSense=0x05 }
> > Nov 13 23:31:20 linux kernel: ide: failed opcode was: unknown
> >
> > This is similar to report:
> > http://lkml.org/lkml/2005/9/21/300 DMA broken in mainline 2.6.13.2
> > _AND_ opensuse vendor 2.6.13-15
This bug is confirmed to be fixed in 2.6.14 by the original reported.
> > Like the first reporter, I also have a LITEON SOHW-1693S DVD burner.
> > Curiously enough mine works fine (burns and reads DVD's just fine).
> > DMA on or DMA off makes no difference.
> > Note the HDIO_GETGEO error below.
> > Is there anything else I can probe to help track down this issue?
>
> Try latest _vanilla_ kernel (2.6.15-rc1), if it still doesn't work
> please fill the bug on http://bugme.osdl.org.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2005-11-15 20:59 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-11-14 7:49 ide: failed opcode errors, thousands of them, 2.6.13-15 Bryce Nesbitt
2005-11-15 16:46 ` Bartlomiej Zolnierkiewicz
2005-11-15 20:59 ` Bartlomiej Zolnierkiewicz
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox