From: Pierre Ossman <drzeus-list@drzeus.cx>
To: Andrew Morton <akpm@osdl.org>
Cc: tiwai@suse.de, linux-kernel@vger.kernel.org, ambx1@neo.rr.com
Subject: Re: [Fwd: [PATCH] [PNP][RFC] Suspend support for PNP bus.]
Date: Wed, 30 Nov 2005 11:12:02 +0100 [thread overview]
Message-ID: <438D7AF2.7030409@drzeus.cx> (raw)
In-Reply-To: <20051129130104.0b0fd77b.akpm@osdl.org>
[-- Attachment #1: Type: text/plain, Size: 381 bytes --]
Andrew Morton wrote:
> Send an update agaisnt next -mm if you like. We can feed that in through
> the alsa tree too. It's not really appropriate to be updating the pnp
> system via the alsa tree, but as long as it's all in one place, it works.
>
>
Assuming the version you pointed out to me is the final one, then this
patch will merge my changes into theirs.
Rgds
Pierre
[-- Attachment #2: pnp-suspend.patch --]
[-- Type: text/x-patch, Size: 6172 bytes --]
[PNP] Improved PnP suspend support.
Also use the PnP functions to start/stop the devices during the suspend so
that drivers will not have to duplicate this code.
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
---
drivers/pnp/driver.c | 37 ++++++++++++++++++++---
drivers/pnp/manager.c | 78 +++++++++++++++++++++++++++++++++++++------------
include/linux/pnp.h | 4 +++
3 files changed, 95 insertions(+), 24 deletions(-)
diff --git a/drivers/pnp/driver.c b/drivers/pnp/driver.c
index ea2cb9a..15fb758 100644
--- a/drivers/pnp/driver.c
+++ b/drivers/pnp/driver.c
@@ -150,19 +150,46 @@ static int pnp_bus_suspend(struct device
{
struct pnp_dev * pnp_dev = to_pnp_dev(dev);
struct pnp_driver * pnp_drv = pnp_dev->driver;
+ int error;
+
+ if (!pnp_drv)
+ return 0;
+
+ if (pnp_drv->suspend) {
+ error = pnp_drv->suspend(pnp_dev, state);
+ if (error)
+ return error;
+ }
+
+ if (!(pnp_drv->flags & PNP_DRIVER_RES_DO_NOT_CHANGE) &&
+ pnp_can_disable(pnp_dev)) {
+ error = pnp_stop_dev(pnp_dev);
+ if (error)
+ return error;
+ }
- if (pnp_drv && pnp_drv->suspend)
- return pnp_drv->suspend(pnp_dev, state);
return 0;
}
-static void pnp_bus_resume(struct device *dev)
+static int pnp_bus_resume(struct device *dev)
{
struct pnp_dev * pnp_dev = to_pnp_dev(dev);
struct pnp_driver * pnp_drv = pnp_dev->driver;
+ int error;
- if (pnp_drv && pnp_drv->resume)
- pnp_drv->resume(pnp_dev);
+ if (!pnp_drv)
+ return 0;
+
+ if (!(pnp_drv->flags & PNP_DRIVER_RES_DO_NOT_CHANGE)) {
+ error = pnp_start_dev(pnp_dev);
+ if (error)
+ return error;
+ }
+
+ if (pnp_drv->resume)
+ return pnp_drv->resume(pnp_dev);
+
+ return 0;
}
struct bus_type pnp_bus_type = {
diff --git a/drivers/pnp/manager.c b/drivers/pnp/manager.c
index 2616686..c4256aa 100644
--- a/drivers/pnp/manager.c
+++ b/drivers/pnp/manager.c
@@ -470,6 +470,53 @@ int pnp_auto_config_dev(struct pnp_dev *
}
/**
+ * pnp_start_dev - low-level start of the PnP device
+ * @dev: pointer to the desired device
+ *
+ * assumes that resources have alread been allocated
+ */
+
+int pnp_start_dev(struct pnp_dev *dev)
+{
+ if (!pnp_can_write(dev)) {
+ pnp_info("Device %s does not supported activation.", dev->dev.bus_id);
+ return -EINVAL;
+ }
+
+ if (dev->protocol->set(dev, &dev->res)<0) {
+ pnp_err("Failed to activate device %s.", dev->dev.bus_id);
+ return -EIO;
+ }
+
+ pnp_info("Device %s activated.", dev->dev.bus_id);
+
+ return 0;
+}
+
+/**
+ * pnp_stop_dev - low-level disable of the PnP device
+ * @dev: pointer to the desired device
+ *
+ * does not free resources
+ */
+
+int pnp_stop_dev(struct pnp_dev *dev)
+{
+ if (!pnp_can_disable(dev)) {
+ pnp_info("Device %s does not supported disabling.", dev->dev.bus_id);
+ return -EINVAL;
+ }
+ if (dev->protocol->disable(dev)<0) {
+ pnp_err("Failed to disable device %s.", dev->dev.bus_id);
+ return -EIO;
+ }
+
+ pnp_info("Device %s disabled.", dev->dev.bus_id);
+
+ return 0;
+}
+
+/**
* pnp_activate_dev - activates a PnP device for use
* @dev: pointer to the desired device
*
@@ -477,6 +524,8 @@ int pnp_auto_config_dev(struct pnp_dev *
*/
int pnp_activate_dev(struct pnp_dev *dev)
{
+ int error;
+
if (!dev)
return -EINVAL;
if (dev->active) {
@@ -487,18 +536,11 @@ int pnp_activate_dev(struct pnp_dev *dev
if (pnp_auto_config_dev(dev))
return -EBUSY;
- if (!pnp_can_write(dev)) {
- pnp_info("Device %s does not supported activation.", dev->dev.bus_id);
- return -EINVAL;
- }
-
- if (dev->protocol->set(dev, &dev->res)<0) {
- pnp_err("Failed to activate device %s.", dev->dev.bus_id);
- return -EIO;
- }
+ error = pnp_start_dev(dev);
+ if (error)
+ return error;
dev->active = 1;
- pnp_info("Device %s activated.", dev->dev.bus_id);
return 1;
}
@@ -511,23 +553,19 @@ int pnp_activate_dev(struct pnp_dev *dev
*/
int pnp_disable_dev(struct pnp_dev *dev)
{
+ int error;
+
if (!dev)
return -EINVAL;
if (!dev->active) {
return 0; /* the device is already disabled */
}
- if (!pnp_can_disable(dev)) {
- pnp_info("Device %s does not supported disabling.", dev->dev.bus_id);
- return -EINVAL;
- }
- if (dev->protocol->disable(dev)<0) {
- pnp_err("Failed to disable device %s.", dev->dev.bus_id);
- return -EIO;
- }
+ error = pnp_stop_dev(dev);
+ if (error)
+ return error;
dev->active = 0;
- pnp_info("Device %s disabled.", dev->dev.bus_id);
/* release the resources so that other devices can use them */
down(&pnp_res_mutex);
@@ -558,6 +596,8 @@ EXPORT_SYMBOL(pnp_manual_config_dev);
#if 0
EXPORT_SYMBOL(pnp_auto_config_dev);
#endif
+EXPORT_SYMBOL(pnp_start_dev);
+EXPORT_SYMBOL(pnp_stop_dev);
EXPORT_SYMBOL(pnp_activate_dev);
EXPORT_SYMBOL(pnp_disable_dev);
EXPORT_SYMBOL(pnp_resource_change);
diff --git a/include/linux/pnp.h b/include/linux/pnp.h
index 472319f..93b0959 100644
--- a/include/linux/pnp.h
+++ b/include/linux/pnp.h
@@ -385,6 +385,8 @@ void pnp_init_resource_table(struct pnp_
int pnp_manual_config_dev(struct pnp_dev *dev, struct pnp_resource_table *res, int mode);
int pnp_auto_config_dev(struct pnp_dev *dev);
int pnp_validate_config(struct pnp_dev *dev);
+int pnp_start_dev(struct pnp_dev *dev);
+int pnp_stop_dev(struct pnp_dev *dev);
int pnp_activate_dev(struct pnp_dev *dev);
int pnp_disable_dev(struct pnp_dev *dev);
void pnp_resource_change(struct resource *resource, unsigned long start, unsigned long size);
@@ -428,6 +430,8 @@ static inline void pnp_init_resource_tab
static inline int pnp_manual_config_dev(struct pnp_dev *dev, struct pnp_resource_table *res, int mode) { return -ENODEV; }
static inline int pnp_auto_config_dev(struct pnp_dev *dev) { return -ENODEV; }
static inline int pnp_validate_config(struct pnp_dev *dev) { return -ENODEV; }
+static inline int pnp_start_dev(struct pnp_dev *dev) { return -ENODEV; }
+static inline int pnp_stop_dev(struct pnp_dev *dev) { return -ENODEV; }
static inline int pnp_activate_dev(struct pnp_dev *dev) { return -ENODEV; }
static inline int pnp_disable_dev(struct pnp_dev *dev) { return -ENODEV; }
static inline void pnp_resource_change(struct resource *resource, unsigned long start, unsigned long size) { }
next prev parent reply other threads:[~2005-11-30 10:12 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-11-04 9:21 [Fwd: [PATCH] [PNP][RFC] Suspend support for PNP bus.] Pierre Ossman
2005-11-04 14:49 ` Dmitry Torokhov
2005-11-04 15:16 ` Pierre Ossman
2005-11-04 15:27 ` Dmitry Torokhov
2005-11-04 15:52 ` Pierre Ossman
2005-11-04 16:09 ` Dmitry Torokhov
2005-11-04 16:12 ` Dmitry Torokhov
2005-11-05 7:15 ` Andrew Morton
2005-11-06 16:50 ` Dmitry Torokhov
2005-11-29 19:32 ` Andrew Morton
2005-11-29 18:50 ` Pierre Ossman
2005-11-29 20:02 ` Andrew Morton
2005-11-29 19:49 ` Pierre Ossman
2005-11-29 21:01 ` Andrew Morton
2005-11-29 20:44 ` Pierre Ossman
2005-11-30 10:12 ` Pierre Ossman [this message]
2005-11-30 10:44 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=438D7AF2.7030409@drzeus.cx \
--to=drzeus-list@drzeus.cx \
--cc=akpm@osdl.org \
--cc=ambx1@neo.rr.com \
--cc=linux-kernel@vger.kernel.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox