From: Douglas Gilbert <dougg@torque.net>
To: linux-scsi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, taggart@debian.org
Subject: lsscsi-0.16 released
Date: Fri, 30 Dec 2005 23:54:41 +1000 [thread overview]
Message-ID: <43B53C21.7050108@torque.net> (raw)
lsscsi is a utility that uses sysfs in linux 2.6 series kernels
to list information about all SCSI devices and SCSI hosts. Both a
compact format (default) which is one line
per device and a "classic" format (like the output of
'cat /proc/scsi/scsi') are supported. Some examples:
$ lsscsi
[0:0:0:0] disk Linux scsi_debug 0004 /dev/sda
[1:0:6:0] tape SONY SDT-7000 0192 /dev/st0
$ lsscsi --classic
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: Linux Model: scsi_debug Rev: 0004
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi1 Channel: 00 Id: 06 Lun: 00
Vendor: SONY Model: SDT-7000 Rev: 0192
Type: Sequential-Access ANSI SCSI revision: 02
Version 0.16 is available at
http://www.torque.net/scsi/lsscsi.html
[See Download section for tarball and rpm]
No major changes. ChangeLog:
Version 0.16 2005/12/30
- clean up peripheral device type naming
- properly identify osst and (tape) changer devices
- add debian build directory
Doug Gilbert
reply other threads:[~2005-12-30 13:53 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=43B53C21.7050108@torque.net \
--to=dougg@torque.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=taggart@debian.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox