DE2104X

DE2104X

[Rene Herman]

Hi Jeff.

Upgraded a DEC Multia to 2.6 today and noticed its 21040 was split off 
into the "de2104x" driver. Also see it's marked "experimental" and just 
wanted to report that it seems to be working fine on the 21040 as found 
in a DEC Multia (Pentium variant):

00:08.0 Ethernet controller: Digital Equipment Corporation DECchip 21040 
[Tulip] (rev 23)
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR+ FastB2B-
         Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 64
         Interrupt: pin A routed to IRQ 10
         Region 0: I/O ports at f880 [size=128]
         Region 1: Memory at fedff800 (32-bit, non-prefetchable) [size=128]

(PCI ID 1011:0002).

Rene.

Re: DE2104X

[Jeff Garzik]

Rene Herman wrote:
> Hi Jeff.
> 
> Upgraded a DEC Multia to 2.6 today and noticed its 21040 was split off 
> into the "de2104x" driver. Also see it's marked "experimental" and just 
> wanted to report that it seems to be working fine on the 21040 as found 
> in a DEC Multia (Pentium variant):

Thanks much for the report, that driver doesn't get much testing.

I believe there is still a problem with cable types other than 10baseT, 
but I would have to search deep in the archives to find info.

	Jeff