* Re: Fw: Bug in saa7134/tuner (Pinnacle MediaCenter 300i)
[not found] ` <1139530309.6629.1.camel@localhost>
@ 2006-02-10 11:03 ` Christian Roessner
0 siblings, 0 replies; only message in thread
From: Christian Roessner @ 2006-02-10 11:03 UTC (permalink / raw)
To: Mauro Carvalho Chehab; +Cc: Johannes Stezenbach, Andrew Morton, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 41029 bytes --]
Hi,
while searching for more information on this bug, I found this in my
/var/log/syslog. Maybe it has something to do with the problems I have.
Feb 9 18:41:37 amd64 udevd-event[14337]: wait_for_sysfs: waiting for
'/sys/devices/pci0000:00/0000:00:0e.0/0000:02:0a.0/i2c-2/2-0047/bus' failed
lspci matches on this:
02:0a.0 Multimedia controller: Philips Semiconductors SAA7134 Video
Broadcast Decoder (rev 01)
I let the old mail text appended (tell me please, if to throw it away in
possible future replies)
Regards
Christian
Mauro Carvalho Chehab schrieb:
> Christian,
>
> May you try this patch?
>
> Cheers,
> Mauro.
>
> Em Qui, 2006-02-09 às 15:23 -0800, Andrew Morton escreveu:
>> Begin forwarded message:
>>
>> Date: Thu, 09 Feb 2006 12:00:01 +0100
>> From: Christian Roessner <christian@roessner-net.com>
>> To: linux-kernel@vger.kernel.org
>> Subject: Bug in saa7134/tuner (Pinnacle MediaCenter 300i)
>>
>>
>> Hello,
>>
>> [1.] One line summary of the problem:
>> saa7134 and tuner modules / Problem with Pinnacle MediaCenter 300i
>>
>>
>> [2.] Full description of the problem/report:
>> After starting the computer, I do a modprobe saa7134.
>>
>> These are the options from /etc/modprobe.conf:
>> options tuner no_autodetect=33
>> options saa7134 card=50 tuner=33
>>
>> (Autodetection for card= works, but I set it anyways. Tuner
>> autodetection seems to be broken)
>>
>> dmesg output:
>>
>> Linux video capture interface: v1.00
>> saa7130/34: v4l2 driver version 0.2.14 loaded
>> ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
>> ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [LNKA] -> GSI 19 (level,
>> low) -> IRQ 17
>> saa7134[0]: found at 0000:02:0a.0, rev: 1, irq: 17, latency: 64, mmio:
>> 0xfeaff800
>> saa7134[0]: subsystem: 11bd:002d, board: Pinnacle PCTV 300i DVB-T + PAL
>> [card=50,insmod option]
>> saa7134[0]: board init: gpio is c806000
>> saa7134[0]: i2c eeprom 00: bd 11 2d 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92
>> saa7134[0]: i2c eeprom 10: 00 f0 04 04 ff 20 ff ff ff ff ff ff ff ff ff ff
>> saa7134[0]: i2c eeprom 20: 01 40 01 02 03 ff 03 01 08 ff 00 25 ff ff ff ff
>> saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> saa7134[0]: i2c eeprom 40: ff 16 00 c0 86 3c 01 01 ff ff ff ff ff ff ff ff
>> saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> saa7134[0]: i2c eeprom 60: 0c 22 17 44 03 27 36 95 ff ff ff ff ff ff ff ff
>> saa7134[0]: i2c eeprom 70: 00 30 8d 18 cc d8 ff ff f4 b8 ff ff ff ff ff ff
>> tuner 2-0043: chip found @ 0x86 (saa7134[0])
>> tuner 2-0043: microtune: companycode=e0e0 part=e0 rev=e0
>> tuner 2-0043: microtune unknown found, not (yet?) supported, sorry :-/
>> saa7134[0]/irq[10,4297703459]: r=0x20 s=0x00 PE
>> saa7134[0]/irq: looping -- clearing PE (parity error!) enable bit
>> saa7134[0]: registered device video0 [v4l2]
>> saa7134[0]: registered device vbi0
>>
>> As you can see, the tuner does not work. I do a rmmod tuner and a rmmod
>> saa7134 and do a modprobe saa7134 again:
>>
>> dmesg output:
>>
>> saa7130/34: v4l2 driver version 0.2.14 loaded
>> ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [LNKA] -> GSI 19 (level,
>> low) -> IRQ 17
>> saa7134[0]: found at 0000:02:0a.0, rev: 1, irq: 17, latency: 64, mmio:
>> 0xfeaff800
>> saa7134[0]: subsystem: 11bd:002d, board: Pinnacle PCTV 300i DVB-T + PAL
>> [card=50,insmod option]
>> saa7134[0]: board init: gpio is c806000
>> tda9887 2-0043: chip found @ 0x86 (saa7134[0])
>> saa7134[0]: i2c eeprom 00: bd 11 2d 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92
>> saa7134[0]: i2c eeprom 10: 00 f0 04 04 ff 20 ff ff ff ff ff ff ff ff ff ff
>> saa7134[0]: i2c eeprom 20: 01 40 01 02 03 ff 03 01 08 ff 00 25 ff ff ff ff
>> saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> saa7134[0]: i2c eeprom 40: ff 16 00 c0 86 3c 01 01 ff ff ff ff ff ff ff ff
>> saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> saa7134[0]: i2c eeprom 60: 0c 22 17 44 03 27 36 95 ff ff ff ff ff ff ff ff
>> saa7134[0]: i2c eeprom 70: 00 30 8d 18 cc d8 ff ff f4 b8 ff ff ff ff ff ff
>> tuner 2-0060: chip found @ 0xc0 (saa7134[0])
>> tuner 2-0060: microtune: companycode=3cbf part=42 rev=83
>> tuner 2-0060: microtune MT2050 found, OK
>> saa7134[0]/irq[10,4298210983]: r=0x20 s=0x00 PE
>> saa7134[0]/irq: looping -- clearing PE (parity error!) enable bit
>> saa7134[0]: registered device video0 [v4l2]
>> saa7134[0]: registered device vbi0
>>
>> After that the card is working.
>>
>> So something goes wrong with detection. One funny thing: If repeating
>> steps from above, the rev= line changes: See:
>>
>> tuner 2-0060: microtune: companycode=3cbf part=42 rev=88
>>
>>
>> [3.] Keywords (i.e., modules, networking, kernel):
>>
>> saa7134; Multimedia
>>
>>
>> [4.] Kernel version (from /proc/version):
>>
>> Linux version 2.6.15-suspend2-r5 (root@amd64) (gcc-Version 4.0.2 (Gentoo
>> 4.0.2-r3, pie-8.7.8)) #5 PREEMPT Wed Feb 8 17:59:21 CET 2006
>>
>> Same with vanilla-sources (2.6.15.3) and 2.6.16_rc2-git
>>
>>
>> [5.] Most recent kernel version which did not have the bug:
>>
>> I am not sure, but I think it was version 2.6.14.x
>>
>>
>> [6.] Output of Oops.. message (if applicable) with symbolic information
>> resolved (see Documentation/oops-tracing.txt)
>>
>> No Oopses
>>
>>
>> [7.] A small shell script or example program which triggers the
>> problem (if possible)
>>
>> Only the modprobe/rmmod stuff from above
>>
>>
>> [8.] Environment
>>
>> Gentoo Base System version 1.12.0_pre15
>> Portage 2.1_pre4-r1 (default-linux/amd64/2005.1, gcc-4.0.2,
>> glibc-2.3.6-r2, 2.6.15-suspend2-r5 x86_64)
>> =================================================================
>> System uname: 2.6.15-suspend2-r5 x86_64 AMD Athlon(tm) 64 Processor 3200+
>> ccache version 2.4 [enabled]
>> dev-lang/python: 2.4.2-r1
>> sys-apps/sandbox: 1.2.17
>> sys-devel/autoconf: 2.13, 2.59-r7
>> sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r1
>> sys-devel/binutils: 2.16.1-r1
>> sys-devel/libtool: 1.5.22
>> virtual/os-headers: 2.6.11-r3
>> ACCEPT_KEYWORDS="amd64 ~amd64"
>> ACCEPT_LICENSE=""
>> ALSA_CARDS="intel8x0 emu10k1"
>> ANT_HOME="/usr/share/ant-core"
>> ARCH="amd64"
>> AUTOCLEAN="yes"
>> BASH_ENV="/etc/spork/is/not/valid/profile.env"
>> CBUILD="x86_64-pc-linux-gnu"
>> CCACHE_SIZE="5G"
>> CDEFINE_amd64="__x86_64__"
>> CDEFINE_x86="__i386__"
>> CFLAGS="-O2 -march=athlon64 -pipe"
>> CFLAGS_x86="-m32 -L/emul/linux/x86/lib -L/emul/linux/x86/usr/lib"
>> CHOST="x86_64-pc-linux-gnu"
>> CHOST_amd64="x86_64-pc-linux-gnu"
>> CHOST_x86="i686-pc-linux-gnu"
>> CLASSPATH="."
>> CLEAN_DELAY="5"
>> CONFIG_PROTECT="/etc /usr/kde/2/share/config /usr/kde/3/share/config
>> /usr/share/X11/xkb /usr/share/config /var/bind /var/qmail/control"
>> CONFIG_PROTECT_MASK="/etc/gconf /etc/splash /etc/terminfo
>> /etc/texmf/web2c /etc/env.d"
>> CVS_RSH="ssh"
>> CXXFLAGS="-O2 -march=athlon64 -pipe"
>> DCCC_PATH="/usr/lib/distcc/bin"
>> DEFAULT_ABI="amd64"
>> DISPLAY=":0.0"
>> DISTCC_LOG=""
>> DISTCC_VERBOSE="0"
>> DISTDIR="/usr/portage/distfiles"
>> EDITOR="/usr/bin/vim"
>> ELIBC="glibc"
>> EMERGE_WARNING_DELAY="10"
>> FEATURES="autoconfig ccache digest distlocks prelink sandbox sfperms strict"
>> FETCHCOMMAND="/usr/bin/wget -t 5 --passive-ftp --no-check-certificate
>> ${URI} -P ${DISTDIR}"
>> FLTK_DOCDIR="/usr/share/doc/fltk-1.1.7/html"
>> FRITZCAPI_CARDS="fcusb2"
>> GCC_SPECS=""
>> GDK_USE_XFT="1"
>> GDM_LANG="de_DE.utf8"
>> GENTOO_MIRRORS="http://ftp-stud.fht-esslingen.de/pub/Mirrors/gentoo/
>> ftp://gentoo.inode.at/source/ ftp://ftp.easynet.nl/mirror/gentoo/
>> ftp://sunsite.informatik.rwth-aachen.de/pub/Linux/gentoo"
>> GUILE_LOAD_PATH="/usr/share/guile/1.6"
>> G_BROKEN_FILENAMES="1"
>> HISTCONTROL="ignoredups:erasedups"
>> HOME="/root"
>> HOSTNAME="amd64"
>> INFOPATH="/usr/share/info:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.16.1/info:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.0.2/info"
>> INPUT_DEVICES="evdev keyboard mouse "
>> JAVAC="/opt/blackdown-jdk-1.4.2.03/bin/javac"
>> JAVA_HOME="/opt/blackdown-jdk-1.4.2.03"
>> JDK_HOME="/opt/blackdown-jdk-1.4.2.03"
>> KERNEL="linux"
>> LADSPA_PATH="/usr/lib64/ladspa"
>> LANG="de_DE.utf8"
>> LC_ALL="de_DE.utf8"
>> LDFLAGS_x86="-m elf_i386 -L/emul/linux/x86/lib -L/emul/linux/x86/usr/lib"
>> LESS="-R -M --shift 5"
>> LESSCHARSET="utf-8"
>> LESSOPEN="|lesspipe.sh %s"
>> LIBDIR_amd64="lib64"
>> LIBDIR_x86="lib32"
>> LINGUAS="de"
>> LOGNAME="root"
>> LS_COLORS="no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:su=37;41:sg=30;43:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.bz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.rar=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.qt=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.pdf=00;32:*.ps=00;32:*.txt=00;32:*.patch=00;32:*.diff=00;32:*.log=00;32:*.tex=00;32:*.doc=00;32:*.flac=01;35:*.mp3=01;3
5:*
>> .mpc=00;36:*.ogg=00;36:*.wav=00;36:*.mid=00;36:*.midi=00;36:*.au=00;36:*.flac=00;36:*.aac=00;36:"
>> MAKEOPTS="-j3"
>> MANPATH="/usr/local/share/man:/usr/share/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.16.1/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.0.2/man::/opt/blackdown-jdk-1.4.2.03/man"
>> MULTILIB_ABIS="x86 amd64"
>> MULTILIB_STRICT_DENY="64-bit.*shared object"
>> MULTILIB_STRICT_DIRS="/lib /usr/lib /usr/kde/*/lib /usr/qt/*/lib
>> /usr/X11R6/lib"
>> MULTILIB_STRICT_EXEMPT="(perl5|gcc|gcc-lib|eclipse-3|debug|portage)"
>> OPENGL_PROFILE="nvidia"
>> PAGER="/usr/bin/less"
>> PATH="/root/bin:/usr/lib/ccache/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.0.2:/opt/Acrobat7:/opt/blackdown-jdk-1.4.2.03/bin:/opt/blackdown-jdk-1.4.2.03/jre/bin"
>> PKGDIR="/usr/portage/packages"
>> PORTAGE_ARCHLIST="ppc s390 amd64 ppc64 m68k arm sparc sh mips ia64 alpha
>> ppc-macos hppa x86"
>> PORTAGE_BINHOST_CHUNKSIZE="3000"
>> PORTAGE_CALLER="emerge"
>> PORTAGE_ELOG_CLASSES="info warn error log"
>> PORTAGE_ELOG_MAILURI="root@localhost localhost"
>> PORTAGE_ELOG_SYSTEM="save mail"
>> PORTAGE_GID="250"
>> PORTAGE_MASTER_PID="15131"
>> PORTAGE_TMPDIR="/var/tmp"
>> PORTAGE_TMPFS="/dev/shm"
>> PORTDIR="/usr/portage"
>> PORTDIR_OVERLAY="/usr/local/overlays/portage"
>> PRELINK_PATH=""
>> PRELINK_PATH_MASK="/usr/lib/gstreamer-0.8:/lib/modules:/usr/lib64/locale:/usr/lib64/wine:/usr/lib64/valgrind:*.la:*.png:*.py:*.pl:*.pm:*.sh:*.xml:*.xslt:*.a:*.js:/usr/lib/klibc"
>> PWD="/root"
>> PYTHONDOCS="/usr/share/doc/python-docs-2.4.2/html"
>> PYTHONPATH="/usr/lib/portage/pym"
>> QTDIR="/emul/linux/x86/usr/qt/2:/emul/linux/x86/usr/qt/3"
>> RESUMECOMMAND="/usr/bin/wget -c -t 5 --passive-ftp
>> --no-check-certificate ${URI} -P ${DISTDIR}"
>> RPMDIR="/usr/portage/rpm"
>> RSYNC_RETRIES="3"
>> RSYNC_TIMEOUT="180"
>> SANE_CONFIG_DIR="/etc/sane.d"
>> SHELL="/bin/bash"
>> SHLVL="1"
>> SYMLINK_LIB="yes"
>> SYNC="rsync://rsync.europe.gentoo.org/gentoo-portage"
>> TERM="xterm"
>> USE="amd64 X X509 a52 aac aalib acl acpi acpi4linux activefilter alsa
>> apache2 avi bash-completion bcmath berkdb bigger-fonts bitmap-fonts
>> bluetooth browserplugin bzip2 bzlib cairo caps cddb cdparanoia cdr
>> chroot client codecs crypt cscope css ctype cups dbm dbus dga dhcp
>> directfb dlloader doc dri dts dvd dvdr dvdread dxr3 eds emboss encode
>> esd exif expat extensions faac faad fame fax faxonly fbcon fbsplash
>> ffmpeg firefox flac font-server foomaticdb freetype fuse gd gdbm gif
>> gimp gimpprint glitz glut gmp gnome gphoto2 gpm gstreamer gtk gtk2
>> gtkhtml guile hal hbci howl icq icu idn imagemagick imap imlib ipv6
>> javascript jbig jpeg jpeg2k lcd lcms ldap libcaca libclamav lirc
>> lm_sensors logrotate lzo lzw lzw-tiff mad maildir mailwrapper mbox mcal
>> md5sum mikmod mime mjpeg mng
>> motif mp3 mpeg mpeg4 mppe-mppc mysql nautilus ncurses network nls
>> no-old-linux nptl nptlonly nsplugin ntfs nvidia ogg oggvorbis opengl oss
>> pam password pcntl pdflib perl php pic png pnp posix postgres ppds
>> python quicktime readline rtc ruby samba scanner sdl session sftplogging
>> slang snmp sockets sox speex spell sqlite ssl subversion svg symlink
>> tcltk tcpd tetex theora threads tiff tokenizer truetype truetype-fonts
>> type1-fonts udev unicode usb userlocales vcd vim-with-x vorbis wma wmf
>> wxwindows xine xml2 xmms xpm xprint xrandr xscreensaver xsl xv xvid zlib
>> elibc_glibc fritzcapi_cards_fcusb2 input_devices_evdev
>> input_devices_keyboard input_devices_mouse kernel_linux linguas_de
>> userland_GNU video_cards_apm video_cards_v4l video_cards_nvidia
>> video_cards_nv"
>> USER="root"
>> USERLAND="GNU"
>> USE_EXPAND="DVB_CARDS ELIBC FCDSL_CARDS FRITZCAPI_CARDS INPUT_DEVICES
>> KERNEL LINGUAS USERLAND VIDEO_CARDS"
>> USE_EXPAND_HIDDEN=""
>> USE_ORDER="env:pkg:conf:defaults"
>> VIDEO_CARDS="apm v4l nvidia nv"
>> XARGS="xargs -r"
>> XAUTHORITY="/root/.xauthVRSTJs"
>> _="/usr/bin/emerge"
>>
>>
>> [8.1.] Software (add the output of the ver_linux script here)
>>
>> If some fields are empty or look unusual you may have an old version.
>> Compare to the current minimal requirements in Documentation/Changes.
>>
>> Linux amd64 2.6.15-suspend2-r5 #5 PREEMPT Wed Feb 8 17:59:21 CET 2006
>> x86_64 AMD Athlon(tm) 64 Processor 3200+ AuthenticAMD GNU/Linux
>>
>> Gnu C 4.0.2
>> Gnu make 3.80
>> binutils 2.16.1
>> util-linux 2.12r
>> mount 2.12r
>> module-init-tools 3.2.2
>> e2fsprogs 1.38
>> reiserfsprogs line
>> reiser4progs line
>> PPP 2.4.3
>> nfs-utils 1.0.7
>> Linux C Library 2.3.6
>> Dynamic linker (ldd) 2.3.6
>> Procps 3.2.6
>> Net-tools 1.60
>> Kbd 1.12
>> Sh-utils 5.93
>> udev 084
>> Modules Loaded tuner saa7134 tda9887 video_buf v4l2_common
>> v4l1_compat ir_kbd_i2c ir_common videodev snd_seq_midi snd_emu10k1_synth
>> snd_emux_synth snd_seq_virmidi snd_seq_midi_emul snd_seq_oss
>> snd_seq_midi_event snd_seq snd_pcm_oss snd_mixer_oss b1pci b1dma b1 capi
>> capifs kernelcapi snd_emu10k1 snd_rawmidi snd_ac97_codec snd_ac97_bus
>> snd_pcm snd_seq_device snd_timer snd_page_alloc snd_util_mem snd_hwdep
>> snd soundcore 8250_pnp 8250 serial_core forcedeth 8139too mii nvidia eth1394
>>
>>
>> [8.2.] Processor information (from /proc/cpuinfo):
>>
>> processor : 0
>> vendor_id : AuthenticAMD
>> cpu family : 15
>> model : 4
>> model name : AMD Athlon(tm) 64 Processor 3200+
>> stepping : 8
>> cpu MHz : 803.924
>> cache size : 1024 KB
>> fpu : yes
>> fpu_exception : yes
>> cpuid level : 1
>> wp : yes
>> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
>> mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext lm
>> 3dnowext 3dnow
>> bogomips : 1608.88
>> TLB size : 1024 4K pages
>> clflush size : 64
>> cache_alignment : 64
>> address sizes : 40 bits physical, 48 bits virtual
>> power management: ts fid vid ttp
>>
>>
>> [8.3.] Module information (from /proc/modules):
>>
>> tuner 39396 0 - Live 0xffffffff885e0000
>> saa7134 114216 0 - Live 0xffffffff885c3000
>> tda9887 14800 0 - Live 0xffffffff885eb000
>> video_buf 18244 1 saa7134, Live 0xffffffff885bd000
>> v4l2_common 6400 1 saa7134, Live 0xffffffff885ba000
>> v4l1_compat 11140 1 saa7134, Live 0xffffffff885b6000
>> ir_kbd_i2c 7436 1 saa7134, Live 0xffffffff885b3000
>> ir_common 8708 2 saa7134,ir_kbd_i2c, Live 0xffffffff885af000
>> videodev 9280 1 saa7134, Live 0xffffffff885ab000
>> snd_seq_midi 6976 0 - Live 0xffffffff885a8000
>> snd_emu10k1_synth 6656 0 - Live 0xffffffff885a5000
>> snd_emux_synth 33920 1 snd_emu10k1_synth, Live 0xffffffff8859b000
>> snd_seq_virmidi 6144 1 snd_emux_synth, Live 0xffffffff88598000
>> snd_seq_midi_emul 5696 1 snd_emux_synth, Live 0xffffffff88595000
>> snd_seq_oss 30948 0 - Live 0xffffffff8858c000
>> snd_seq_midi_event 6656 3 snd_seq_midi,snd_seq_virmidi,snd_seq_oss, Live
>> 0xffffffff88589000
>> snd_seq 49240 8
>> snd_seq_midi,snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_oss,snd_seq_midi_event,
>> Live 0xffffffff8857b000
>> snd_pcm_oss 39008 0 - Live 0xffffffff88570000
>> snd_mixer_oss 15232 1 snd_pcm_oss, Live 0xffffffff8856b000
>> b1pci 7360 1 - Live 0xffffffff88566000
>> b1dma 13636 1 b1pci, Live 0xffffffff88561000
>> b1 22784 2 b1pci,b1dma, Live 0xffffffff8855a000
>> capi 14640 4 - Live 0xffffffff88555000
>> capifs 4752 2 capi, Live 0xffffffff88552000
>> kernelcapi 46112 4 b1pci,b1dma,b1,capi, Live 0xffffffff88545000
>> snd_emu10k1 112196 2 snd_emu10k1_synth, Live 0xffffffff88528000
>> snd_rawmidi 21920 3 snd_seq_midi,snd_seq_virmidi,snd_emu10k1, Live
>> 0xffffffff88521000
>> snd_ac97_codec 98428 1 snd_emu10k1, Live 0xffffffff88507000
>> snd_ac97_bus 2432 1 snd_ac97_codec, Live 0xffffffff88505000
>> snd_pcm 81932 3 snd_pcm_oss,snd_emu10k1,snd_ac97_codec, Live
>> 0xffffffff884ef000
>> snd_seq_device 7824 7
>> snd_seq_midi,snd_emu10k1_synth,snd_emux_synth,snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi,
>> Live 0xffffffff884ec000
>> snd_timer 21256 3 snd_seq,snd_emu10k1,snd_pcm, Live 0xffffffff884e5000
>> snd_page_alloc 8400 2 snd_emu10k1,snd_pcm, Live 0xffffffff884e1000
>> snd_util_mem 3840 2 snd_emux_synth,snd_emu10k1, Live 0xffffffff884df000
>> snd_hwdep 8392 2 snd_emux_synth,snd_emu10k1, Live 0xffffffff884db000
>> snd 53184 15
>> snd_emux_synth,snd_seq_virmidi,snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_emu10k1,snd_rawmidi,snd_ac97_codec,snd_pcm,snd_seq_device,snd_timer,snd_hwdep,
>> Live 0xffffffff884cd000
>> soundcore 8480 1 snd, Live 0xffffffff884c9000
>> 8250_pnp 10496 0 - Live 0xffffffff884c5000
>> 8250 20992 1 8250_pnp, Live 0xffffffff884be000
>> serial_core 18176 1 8250, Live 0xffffffff884b8000
>> forcedeth 21956 0 - Live 0xffffffff884b1000
>> 8139too 22976 0 - Live 0xffffffff884aa000
>> mii 4928 1 8139too, Live 0xffffffff884a7000
>> nvidia 4847316 12 - Live 0xffffffff88006000
>> eth1394 17936 0 - Live 0xffffffff88000000
>>
>>
>> [8.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
>>
>> 0000-001f : dma1
>> 0020-0021 : pic1
>> 0040-0043 : timer0
>> 0050-0053 : timer1
>> 0060-006f : keyboard
>> 0070-0077 : rtc
>> 0080-008f : dma page reg
>> 00a0-00a1 : pic2
>> 00c0-00df : dma2
>> 00f0-00ff : fpu
>> 0170-0177 : ide1
>> 01f0-01f7 : ide0
>> 02f8-02ff : serial
>> 0376-0376 : ide1
>> 0378-037a : parport0
>> 03c0-03df : vesafb
>> 03f6-03f6 : ide0
>> 03f8-03ff : serial
>> 0480-0487 : pnp 00:08
>> 0810-0815 : ACPI CPU throttle
>> 0970-0977 : 0000:00:0a.0
>> 0970-0977 : sata_nv
>> 09f0-09f7 : 0000:00:0a.0
>> 09f0-09f7 : sata_nv
>> 0b70-0b73 : 0000:00:0a.0
>> 0b70-0b73 : sata_nv
>> 0bf0-0bf3 : 0000:00:0a.0
>> 0bf0-0bf3 : sata_nv
>> 0cf8-0cff : PCI conf1
>> 0d00-0d07 : pnp 00:08
>> 0d00-0d07 : it87-isa
>> 4000-4003 : PM1a_EVT_BLK
>> 4004-4005 : PM1a_CNT_BLK
>> 4008-400b : PM_TMR
>> 401c-401c : PM2_CNT_BLK
>> 4020-4027 : GPE0_BLK
>> 5000-503f : 0000:00:01.1
>> 5000-5007 : nForce2_smbus
>> 5040-507f : 0000:00:01.1
>> 5040-5047 : nForce2_smbus
>> 5080-509f : 0000:00:01.1
>> b000-cfff : PCI Bus #02
>> b800-b87f : 0000:02:0b.0
>> bc00-bc1f : 0000:02:09.0
>> bc00-bc1e : b1pci-bc00
>> c000-c03f : 0000:02:09.0
>> c400-c41f : 0000:02:08.0
>> c400-c41f : EMU10K1
>> c800-c8ff : 0000:02:07.0
>> c800-c8ff : 8139too
>> cc00-cc07 : 0000:02:08.1
>> d000-d07f : 0000:00:0a.0
>> d000-d07f : sata_nv
>> d400-d40f : 0000:00:0a.0
>> d400-d40f : sata_nv
>> ec00-ec07 : 0000:00:05.0
>> ec00-ec07 : forcedeth
>> ffa0-ffaf : 0000:00:08.0
>> ffa0-ffa7 : ide0
>> ffa8-ffaf : ide1
>>
>> 00000000-0009fbff : System RAM
>> 0009fc00-0009ffff : reserved
>> 000a0000-000bffff : Video RAM area
>> 000c0000-000c7fff : Video ROM
>> 000f0000-000fffff : System ROM
>> 00100000-3ffbffff : System RAM
>> 00100000-003ceeaa : Kernel code
>> 003ceeab-0051962f : Kernel data
>> 3ffc0000-3ffcffff : ACPI Tables
>> 3ffd0000-3fffffff : ACPI Non-volatile Storage
>> 9a800000-ba7fffff : PCI Bus #01
>> a0000000-afffffff : 0000:01:00.0
>> a0000000-afffffff : vesafb
>> c0000000-dfffffff : 0000:00:00.0
>> fa900000-fe9fffff : PCI Bus #01
>> fc000000-fcffffff : 0000:01:00.0
>> fd000000-fdffffff : 0000:01:00.0
>> fd000000-fdffffff : nvidia
>> fe9e0000-fe9fffff : 0000:01:00.0
>> fea00000-feafffff : PCI Bus #02
>> feaff000-feaff7ff : 0000:02:0b.0
>> feaff000-feaff7ff : ohci1394
>> feaff800-feaffbff : 0000:02:0a.0
>> feaff800-feaffbff : saa7134[0]
>> feaffc00-feaffcff : 0000:02:07.0
>> feaffc00-feaffcff : 8139too
>> febfc000-febfcfff : 0000:00:05.0
>> febfc000-febfcfff : forcedeth
>> febfd000-febfdfff : 0000:00:02.0
>> febfd000-febfdfff : ohci_hcd
>> febfe000-febfefff : 0000:00:02.1
>> febfe000-febfefff : ohci_hcd
>> febffc00-febffcff : 0000:00:02.2
>> febffc00-febffcff : ehci_hcd
>> fec00000-fec00fff : reserved
>> fee00000-fee00fff : reserved
>> ff7c0000-ffffffff : reserved
>>
>>
>> [8.5.] PCI information ('lspci -vvv' as root)
>>
>> 00:00.0 Host bridge: nVidia Corporation nForce3 250Gb Host Bridge (rev a1)
>> Subsystem: ASUSTeK Computer Inc. Unknown device 813f
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR+ FastB2B-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 0
>> Region 0: Memory at c0000000 (32-bit, prefetchable) [size=512M]
>> Capabilities: [44] HyperTransport: Slave or Primary Interface
>> Command: BaseUnitID=0 UnitCnt=14 MastHost- DefDir- DUL-
>> Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO-
>> <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>> Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut-
>> LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
>> Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+
>> <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>> Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut-
>> LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
>> Revision ID: 1.03
>> Link Frequency 0: 800MHz
>> Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
>> Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+
>> 500MHz+ 600MHz+ 800MHz+ 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>> Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
>> Link Frequency 1: 200MHz
>> Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
>> Link Frequency Capability 1: 200MHz- 300MHz- 400MHz-
>> 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>> Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE-
>> CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
>> Prefetchable memory behind bridge Upper: 00-00
>> Bus Number: 00
>> Capabilities: [c0] AGP version 3.0
>> Status: RQ=32 Iso- ArqSz=2 Cal=0 SBA+ ITACoh- GART64-
>> HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
>> Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW+
>> Rate=x8
>>
>> 00:01.0 ISA bridge: nVidia Corporation nForce3 250Gb LPC Bridge (rev a2)
>> Subsystem: ASUSTeK Computer Inc. Unknown device 813f
>> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 0
>>
>> 00:01.1 SMBus: nVidia Corporation nForce 250Gb PCI System Management
>> (rev a1)
>> Subsystem: ASUSTeK Computer Inc. Unknown device 813f
>> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Interrupt: pin A routed to IRQ 0
>> Region 0: I/O ports at 5080 [size=32]
>> Region 4: I/O ports at 5000 [size=64]
>> Region 5: I/O ports at 5040 [size=64]
>> Capabilities: [44] Power Management version 2
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
>> PME(D0-,D1-,D2-,D3hot+,D3cold+)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>
>> 00:02.0 USB Controller: nVidia Corporation CK8S USB Controller (rev a1)
>> (prog-if 10 [OHCI])
>> Subsystem: ASUSTeK Computer Inc. Unknown device 813f
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 0 (750ns min, 250ns max)
>> Interrupt: pin A routed to IRQ 19
>> Region 0: Memory at febfd000 (32-bit, non-prefetchable) [size=4K]
>> Capabilities: [44] Power Management version 2
>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
>> PME(D0+,D1+,D2+,D3hot+,D3cold+)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>
>> 00:02.1 USB Controller: nVidia Corporation CK8S USB Controller (rev a1)
>> (prog-if 10 [OHCI])
>> Subsystem: ASUSTeK Computer Inc. Unknown device 813f
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 0 (750ns min, 250ns max)
>> Interrupt: pin B routed to IRQ 16
>> Region 0: Memory at febfe000 (32-bit, non-prefetchable) [size=4K]
>> Capabilities: [44] Power Management version 2
>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
>> PME(D0+,D1+,D2+,D3hot+,D3cold+)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>
>> 00:02.2 USB Controller: nVidia Corporation nForce3 EHCI USB 2.0
>> Controller (rev a2) (prog-if 20 [EHCI])
>> Subsystem: ASUSTeK Computer Inc. Unknown device 813f
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 0 (750ns min, 250ns max)
>> Interrupt: pin C routed to IRQ 18
>> Region 0: Memory at febffc00 (32-bit, non-prefetchable) [size=256]
>> Capabilities: [44] Debug port
>> Capabilities: [80] Power Management version 2
>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
>> PME(D0+,D1+,D2+,D3hot+,D3cold+)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>
>> 00:05.0 Bridge: nVidia Corporation CK8S Ethernet Controller (rev a2)
>> Subsystem: ASUSTeK Computer Inc. Unknown device 80a7
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 0 (250ns min, 5000ns max)
>> Interrupt: pin A routed to IRQ 18
>> Region 0: Memory at febfc000 (32-bit, non-prefetchable) [size=4K]
>> Region 1: I/O ports at ec00 [size=8]
>> Capabilities: [44] Power Management version 2
>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
>> PME(D0+,D1+,D2+,D3hot+,D3cold+)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>
>> 00:08.0 IDE interface: nVidia Corporation CK8S Parallel ATA Controller
>> (v2.5) (rev a2) (prog-if 8a [Master SecP PriP])
>> Subsystem: ASUSTeK Computer Inc. Unknown device 813f
>> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 0 (750ns min, 250ns max)
>> Region 4: I/O ports at ffa0 [size=16]
>> Capabilities: [44] Power Management version 2
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
>> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>
>> 00:0a.0 IDE interface: nVidia Corporation CK8S Serial ATA Controller
>> (v2.5) (rev a2) (prog-if 85 [Master SecO PriO])
>> Subsystem: ASUSTeK Computer Inc. Unknown device 813f
>> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 0 (750ns min, 250ns max)
>> Interrupt: pin A routed to IRQ 16
>> Region 0: I/O ports at 09f0 [size=8]
>> Region 1: I/O ports at 0bf0 [size=4]
>> Region 2: I/O ports at 0970 [size=8]
>> Region 3: I/O ports at 0b70 [size=4]
>> Region 4: I/O ports at d400 [size=16]
>> Region 5: I/O ports at d000 [size=128]
>> Capabilities: [44] Power Management version 2
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
>> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>
>> 00:0b.0 PCI bridge: nVidia Corporation nForce3 250Gb AGP Host to PCI
>> Bridge (rev a2) (prog-if 00 [Normal decode])
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR+ FastB2B-
>> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 16
>> Bus: primary=00, secondary=01, subordinate=01, sec-latency=10
>> I/O behind bridge: 0000f000-00000fff
>> Memory behind bridge: fa900000-fe9fffff
>> Prefetchable memory behind bridge: 9a800000-ba7fffff
>> Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
>> <TAbort- <MAbort+ <SERR- <PERR-
>> BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
>>
>> 00:0e.0 PCI bridge: nVidia Corporation nForce3 250Gb PCI-to-PCI Bridge
>> (rev a2) (prog-if 00 [Normal decode])
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR+ FastB2B-
>> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR+ <PERR-
>> Latency: 0
>> Bus: primary=00, secondary=02, subordinate=02, sec-latency=128
>> I/O behind bridge: 0000b000-0000cfff
>> Memory behind bridge: fea00000-feafffff
>> Prefetchable memory behind bridge: fff00000-000fffff
>> Secondary status: 66MHz- FastB2B+ ParErr+ DEVSEL=medium >TAbort-
>> <TAbort- <MAbort+ <SERR- <PERR+
>> BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>>
>> 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
>> HyperTransport Technology Configuration
>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Capabilities: [80] HyperTransport: Host or Secondary Interface
>> !!! Possibly incomplete decoding
>> Command: WarmRst+ DblEnd-
>> Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
>> <CRCErr=0
>> Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
>> Revision ID: 1.02
>>
>> 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
>> Address Map
>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>>
>> 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
>> DRAM Controller
>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>>
>> 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
>> Miscellaneous Control
>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>>
>> 01:00.0 VGA compatible controller: nVidia Corporation NV40 [GeForce 6800
>> GT] (rev a1) (prog-if 00 [VGA])
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR+ FastB2B-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 248 (1250ns min, 250ns max)
>> Interrupt: pin A routed to IRQ 20
>> Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
>> Region 1: Memory at a0000000 (32-bit, prefetchable) [size=256M]
>> Region 2: Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
>> [virtual] Expansion ROM at fe9e0000 [disabled] [size=128K]
>> Capabilities: [60] Power Management version 2
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
>> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>> Capabilities: [44] AGP version 3.0
>> Status: RQ=256 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64-
>> HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
>> Command: RQ=32 ArqSz=2 Cal=0 SBA+ AGP+ GART64- 64bit-
>> FW+ Rate=x8
>>
>> 02:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
>> RTL-8139/8139C/8139C+ (rev 10)
>> Subsystem: Realtek Semiconductor Co., Ltd. RT8139
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR+ FastB2B-
>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 64 (8000ns min, 16000ns max)
>> Interrupt: pin A routed to IRQ 17
>> Region 0: I/O ports at c800 [size=256]
>> Region 1: Memory at feaffc00 (32-bit, non-prefetchable) [size=256]
>> Capabilities: [50] Power Management version 2
>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
>> PME(D0-,D1+,D2+,D3hot+,D3cold+)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>
>> 02:08.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
>> Subsystem: Creative Labs SBLive! 5.1 Model SB0100
>> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR+ FastB2B-
>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 64 (500ns min, 5000ns max)
>> Interrupt: pin A routed to IRQ 21
>> Region 0: I/O ports at c400 [size=32]
>> Capabilities: [dc] Power Management version 1
>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
>> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>
>> 02:08.1 Input device controller: Creative Labs SB Live! MIDI/Game Port
>> (rev 07)
>> Subsystem: Creative Labs Gameport Joystick
>> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR+ FastB2B-
>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 64
>> Region 0: I/O ports at cc00 [size=8]
>> Capabilities: [dc] Power Management version 1
>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
>> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>
>> 02:09.0 Network controller: AVM Audiovisuelles MKTG & Computer System
>> GmbH B1 ISDN
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR+ FastB2B-
>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 64
>> Interrupt: pin A routed to IRQ 22
>> Region 0: I/O ports at c000 [size=64]
>> Region 1: I/O ports at bc00 [size=32]
>>
>> 02:0a.0 Multimedia controller: Philips Semiconductors SAA7134 Video
>> Broadcast Decoder (rev 01)
>> Subsystem: Pinnacle Systems Inc. Pinnacle PCTV 300i DVB-T + PAL
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR+
>> Latency: 64 (62000ns min, 62000ns max)
>> Interrupt: pin A routed to IRQ 17
>> Region 0: Memory at feaff800 (32-bit, non-prefetchable) [size=1K]
>> Capabilities: [40] Power Management version 1
>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
>> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>> Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>>
>> 02:0b.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
>> Controller (rev 80) (prog-if 10 [OHCI])
>> Subsystem: ASUSTeK Computer Inc. Unknown device 808a
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
>> ParErr- Stepping- SERR+ FastB2B-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR+
>> Latency: 64 (8000ns max), Cache Line Size 08
>> Interrupt: pin A routed to IRQ 17
>> Region 0: Memory at feaff000 (32-bit, non-prefetchable) [size=2K]
>> Region 1: I/O ports at b800 [size=128]
>> Capabilities: [50] Power Management version 2
>> Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
>> PME(D0-,D1-,D2+,D3hot+,D3cold+)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>
>>
>> [8.6.] SCSI information (from /proc/scsi/scsi)
>>
>> Attached devices:
>> Host: scsi0 Channel: 00 Id: 00 Lun: 00
>> Vendor: ATA Model: SAMSUNG SP1614C Rev: SW10
>> Type: Direct-Access ANSI SCSI revision: 05
>>
>>
>> [8.7.] Other information that might be relevant to the problem
>> (please look in /proc and include all information that you
>> think to be relevant):
>>
>> Nothing more ;-)
>>
>>
>> [X.] Other notes, patches, fixes, workarounds:
>>
>> The rmmod/modprobe fun from above is a very, very bad workaround.
>>
>> Thanks in advance
>>
>> Christian
>>
>>
> Cheers,
> Mauro.
>
>
> ------------------------------------------------------------------------
>
> --- saa7134-cards.c.orig 2006-02-08 17:58:46.000000000 +0100
> +++ saa7134-cards.c 2006-02-08 18:39:04.000000000 +0100
> @@ -979,7 +979,7 @@
> .radio_type = UNSET,
> .tuner_addr = ADDR_UNSET,
> .radio_addr = ADDR_UNSET,
> - .tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_ACTIVE,
> + .tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_INACTIVE,
> .inputs = {{
> .name = name_tv,
> .vmux = 3,
> @@ -1668,7 +1668,7 @@
> .radio_type = UNSET,
> .tuner_addr = ADDR_UNSET,
> .radio_addr = ADDR_UNSET,
> - .tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_ACTIVE,
> + .tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_INACTIVE,
> .mpeg = SAA7134_MPEG_DVB,
> .inputs = {{
> .name = name_tv,
--
Tel.: 0641-2097252, Mobil: 0171-3611230
PGP: http://www.roessner-net.com/0x6B929997.asc
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 252 bytes --]
^ permalink raw reply [flat|nested] only message in thread