libata PATA drivers patch for 2.6.16-rc4

libata PATA drivers patch for 2.6.16-rc4

[Alan Cox]

Various fixes and cleanups, some new functionality notably Promise
20246/2026x support which although basic should get it going with disk.
Not 100% sure about ATAPI on PDC2026x yet.

http://zeniv.linux.org.uk/~alan/IDE

Re: libata PATA drivers patch for 2.6.16-rc4

[Meelis Roos]

AC> Various fixes and cleanups, some new functionality notably Promise
AC> 20246/2026x support which although basic should get it going with disk.

So I enabled more config options as before and got a compile error:

--- drivers/scsi/pata_pcmcia.c.orig	2006-02-20 17:41:01.000000000 +0200
+++ drivers/scsi/pata_pcmcia.c	2006-02-20 17:41:10.000000000 +0200
@@ -377,7 +377,7 @@
 
 static struct pcmcia_driver pcmcia_driver = {
 	.owner		= THIS_MODULE,
-	.drv	{
+	.drv	= {
 		.name		= DRV_NAME,
 	},
 	.id_table	= pcmcia_devices,

-- 
Meelis Roos

Re: libata PATA drivers patch for 2.6.16-rc4

[Alan Cox]

On Llu, 2006-02-20 at 16:42 +0100, Fabio Comolli wrote:
> Hi Alan.
> Does this version address the issue I pointed out some days ago (ICH4
> identified as only UDMA/66 capable)?

I'm still scratching my head over that one. Its on the todo list.
Actually one thought - can you send me an lspci -vxx


Alan

Re: libata PATA drivers patch for 2.6.16-rc4

[Alan Cox]

On Llu, 2006-02-20 at 17:44 +0200, Meelis Roos wrote:
> AC> Various fixes and cleanups, some new functionality notably Promise
> AC> 20246/2026x support which although basic should get it going with disk.
> 
> So I enabled more config options as before and got a compile error:
> 
> --- drivers/scsi/pata_pcmcia.c.orig	2006-02-20 17:41:01.000000000 +0200
> +++ drivers/scsi/pata_pcmcia.c	2006-02-20 17:41:10.000000000 +0200
> @@ -377,7 +377,7 @@
>  
>  static struct pcmcia_driver pcmcia_driver = {
>  	.owner		= THIS_MODULE,
> -	.drv	{
> +	.drv	= {

Changed - strangely gcc 3.4.4 doesn't seem to mind the old code. Also
added the PCMCIA dep check you pointed out.

Thanks
Alan

Re: libata PATA drivers patch for 2.6.16-rc4

[Fabio Comolli]

[-- Attachment #1: Type: text/plain, Size: 398 bytes --]

Attached.
Fabio

On 2/20/06, Alan Cox <alan@lxorguk.ukuu.org.uk> wrote:
> On Llu, 2006-02-20 at 16:42 +0100, Fabio Comolli wrote:
> > Hi Alan.
> > Does this version address the issue I pointed out some days ago (ICH4
> > identified as only UDMA/66 capable)?
>
> I'm still scratching my head over that one. Its on the todo list.
> Actually one thought - can you send me an lspci -vxx
>
>
> Alan
>
>

[-- Attachment #2: lspci_output.txt --]
[-- Type: text/plain, Size: 10719 bytes --]

00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
	Subsystem: Acer Incorporated [ALI] Unknown device 0064
	Flags: bus master, fast devsel, latency 0
	Memory at <unassigned> (32-bit, prefetchable)
	Capabilities: [40] Vendor Specific Information
00: 86 80 80 35 06 01 90 30 02 00 00 06 00 00 80 00
10: 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 64 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00

00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
	Subsystem: Acer Incorporated [ALI] Unknown device 0064
	Flags: bus master, fast devsel, latency 0
00: 86 80 84 35 06 00 80 00 02 00 80 08 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 64 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
	Subsystem: Acer Incorporated [ALI] Unknown device 0064
	Flags: bus master, fast devsel, latency 0
00: 86 80 85 35 06 00 80 00 02 00 80 08 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 64 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) (prog-if 00 [VGA])
	Subsystem: Acer Incorporated [ALI] Unknown device 0064
	Flags: bus master, fast devsel, latency 0, IRQ 6
	Memory at e8000000 (32-bit, prefetchable) [size=128M]
	Memory at e0000000 (32-bit, non-prefetchable) [size=512K]
	I/O ports at 1800 [size=8]
	Capabilities: [d0] Power Management version 1
00: 86 80 82 35 07 00 98 00 02 00 00 03 00 00 80 00
10: 08 00 00 e8 00 00 00 e0 01 18 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 64 00
30: 00 00 00 00 d0 00 00 00 00 00 00 00 06 01 00 00

00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
	Subsystem: Acer Incorporated [ALI] Unknown device 0064
	Flags: bus master, fast devsel, latency 0
	Memory at f0000000 (32-bit, prefetchable) [size=128M]
	Memory at e0080000 (32-bit, non-prefetchable) [size=512K]
	Capabilities: [d0] Power Management version 1
00: 86 80 82 35 07 00 90 00 02 00 80 03 00 00 80 00
10: 08 00 00 f0 00 00 08 e0 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 64 00
30: 00 00 00 00 d0 00 00 00 00 00 00 00 00 00 00 00

00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
	Subsystem: Acer Incorporated [ALI] Unknown device 0064
	Flags: bus master, medium devsel, latency 0, IRQ 6
	I/O ports at 1820 [size=32]
00: 86 80 c2 24 05 00 80 02 03 00 03 0c 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 21 18 00 00 00 00 00 00 00 00 00 00 25 10 64 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 06 01 00 00

00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
	Subsystem: Acer Incorporated [ALI] Unknown device 0064
	Flags: bus master, medium devsel, latency 0, IRQ 6
	I/O ports at 1840 [size=32]
00: 86 80 c4 24 05 00 80 02 03 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 41 18 00 00 00 00 00 00 00 00 00 00 25 10 64 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 06 02 00 00

00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
	Subsystem: Acer Incorporated [ALI] Unknown device 0064
	Flags: bus master, medium devsel, latency 0, IRQ 6
	I/O ports at 1860 [size=32]
00: 86 80 c7 24 05 00 80 02 03 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 61 18 00 00 00 00 00 00 00 00 00 00 25 10 64 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 06 03 00 00

00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI])
	Subsystem: Acer Incorporated [ALI] Unknown device 0064
	Flags: bus master, medium devsel, latency 0, IRQ 10
	Memory at e0100000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
	Capabilities: [58] Debug port
00: 86 80 cd 24 06 01 90 02 03 20 03 0c 00 00 00 00
10: 00 00 10 e0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 64 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 04 00 00

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: e0200000-e05fffff
	Prefetchable memory behind bridge: 30000000-32ffffff
00: 86 80 48 24 07 01 80 88 83 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 02 02 40 30 30 80 22
20: 20 e0 50 e0 00 30 f0 32 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 04 00

00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
	Flags: bus master, medium devsel, latency 0
00: 86 80 cc 24 0f 00 80 02 03 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP])
	Subsystem: Acer Incorporated [ALI] Unknown device 0064
	Flags: bus master, medium devsel, latency 0, IRQ 6
	I/O ports at <unassigned>
	I/O ports at <unassigned>
	I/O ports at <unassigned>
	I/O ports at <unassigned>
	I/O ports at 1810 [size=16]
	Memory at 33000000 (32-bit, non-prefetchable) [size=1K]
00: 86 80 ca 24 07 00 80 02 03 8a 01 01 00 00 00 00
10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
20: 11 18 00 00 00 00 00 33 00 00 00 00 25 10 64 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 01 00 00

00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
	Subsystem: Acer Incorporated [ALI] Unknown device 0064
	Flags: medium devsel, IRQ 10
	I/O ports at 1880 [size=32]
00: 86 80 c3 24 01 00 80 02 03 00 05 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 81 18 00 00 00 00 00 00 00 00 00 00 25 10 64 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 00

00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
	Subsystem: Acer Incorporated [ALI] Unknown device 0064
	Flags: bus master, medium devsel, latency 0, IRQ 10
	I/O ports at 1c00 [size=256]
	I/O ports at 18c0 [size=64]
	Memory at e0100c00 (32-bit, non-prefetchable) [size=512]
	Memory at e0100800 (32-bit, non-prefetchable) [size=256]
	Capabilities: [50] Power Management version 2
00: 86 80 c5 24 07 00 90 02 03 00 01 04 00 00 00 00
10: 01 1c 00 00 c1 18 00 00 00 0c 10 e0 00 08 10 e0
20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 64 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 02 00 00

00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic])
	Subsystem: Acer Incorporated [ALI] Unknown device 0064
	Flags: medium devsel, IRQ 10
	I/O ports at 2400 [size=256]
	I/O ports at 2000 [size=128]
	Capabilities: [50] Power Management version 2
00: 86 80 c6 24 01 00 90 02 03 00 03 07 00 00 00 00
10: 01 24 00 00 01 20 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 64 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 02 00 00

02:02.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01)
	Subsystem: Acer Incorporated [ALI] Unknown device 0064
	Flags: bus master, fast devsel, latency 64, IRQ 6
	Memory at e0204000 (32-bit, non-prefetchable) [size=8K]
	[virtual] Expansion ROM at 32000000 [disabled] [size=16K]
	Capabilities: [40] Power Management version 2
00: e4 14 01 44 06 01 10 08 01 00 00 02 00 40 00 00
10: 00 40 20 e0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 64 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 06 01 00 00

02:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG (rev 05)
	Subsystem: Intel Corporation Unknown device 2701
	Flags: bus master, medium devsel, latency 64, IRQ 10
	Memory at e0208000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [dc] Power Management version 2
00: 86 80 20 42 16 01 90 02 05 00 80 02 08 40 00 00
10: 00 80 20 e0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 01 27
30: 00 00 00 00 dc 00 00 00 00 00 00 00 0a 01 03 18

02:06.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
	Subsystem: Acer Incorporated [ALI] Unknown device 0064
	Flags: bus master, medium devsel, latency 168, IRQ 10
	Memory at e0209000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
	Memory window 0: 30000000-31fff000 (prefetchable)
	Memory window 1: 34000000-35fff000
	I/O window 0: 00003000-000030ff
	I/O window 1: 00003400-000034ff
	16-bit legacy interface ports at 0001
00: 4c 10 31 80 07 00 10 02 00 00 07 06 10 a8 82 00
10: 00 90 20 e0 a0 00 00 02 02 03 06 b0 00 00 00 30
20: 00 f0 ff 31 00 00 00 34 00 f0 ff 35 00 30 00 00
30: fc 30 00 00 00 34 00 00 fc 34 00 00 0a 01 c0 05
40: 25 10 64 00 01 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

02:06.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller (prog-if 10 [OHCI])
	Subsystem: Acer Incorporated [ALI] Unknown device 0064
	Flags: bus master, medium devsel, latency 64, IRQ 10
	Memory at e020a000 (32-bit, non-prefetchable) [size=2K]
	Memory at e0200000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: [44] Power Management version 2
00: 4c 10 32 80 16 01 10 02 00 10 00 0c 08 40 80 00
10: 00 a0 20 e0 00 00 20 e0 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 64 00
30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 03 04

02:06.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
	Subsystem: Acer Incorporated [ALI] Unknown device 0064
	Flags: bus master, medium devsel, latency 64, IRQ 10
	Memory at e0206000 (32-bit, non-prefetchable) [size=8K]
	Capabilities: [44] Power Management version 2
00: 4c 10 33 80 06 01 10 02 00 00 80 01 08 40 80 00
10: 00 60 20 e0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 64 00
30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 07 04

Re: libata PATA drivers patch for 2.6.16-rc4

[Francesco Biscani]

On Monday 20 February 2006 15:19, Alan Cox wrote:
> Various fixes and cleanups, some new functionality notably Promise
> 20246/2026x support which although basic should get it going with disk.
> Not 100% sure about ATAPI on PDC2026x yet.
>
> http://zeniv.linux.org.uk/~alan/IDE

Got an Ali chipset  here, it booted fine.

Feb 20 22:06:17 kurtz Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Feb 20 22:06:17 kurtz ide: Assuming 33MHz system bus speed for PIO modes; 
override with idebus=xx
Feb 20 22:06:17 kurtz libata version 1.20 loaded.
Feb 20 22:06:17 kurtz ACPI: PCI Interrupt 0000:00:10.0[A]: no GSI
Feb 20 22:06:17 kurtz ata1: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x2040 
irq 14
Feb 20 22:06:17 kurtz ata1: dev 0 cfg 49:0f00 82:746b 83:7fe8 84:4023 85:f469 
86:3e48 87:4023 88:203f
Feb 20 22:06:17 kurtz ata1: dev 0 ATA-6, max UDMA/100, 78140160 sectors: LBA48
Feb 20 22:06:17 kurtz ata1: dev 0 configured for UDMA/100
Feb 20 22:06:17 kurtz scsi0 : ali
Feb 20 22:06:17 kurtz Vendor: ATA       Model: IC25N040ATMR04-0  Rev: MO2O
Feb 20 22:06:17 kurtz Type:   Direct-Access                      ANSI SCSI 
revision: 05
Feb 20 22:06:17 kurtz ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2048 
irq 15
Feb 20 22:06:17 kurtz ata2: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 
86:0000 87:0000 88:0000
Feb 20 22:06:17 kurtz ata2: dev 0 ATAPI, max MWDMA2
Feb 20 22:06:17 kurtz ata2: dev 0 configured for MWDMA2
Feb 20 22:06:17 kurtz scsi1 : ali
Feb 20 22:06:17 kurtz ata2(0): WARNING: ATAPI is disabled, device ignored.
Feb 20 22:06:17 kurtz SCSI device sda: 78140160 512-byte hdwr sectors (40008 
MB)
Feb 20 22:06:17 kurtz sda: Write Protect is off
Feb 20 22:06:17 kurtz sda: Mode Sense: 00 3a 00 00
Feb 20 22:06:17 kurtz SCSI device sda: drive cache: write back
Feb 20 22:06:17 kurtz SCSI device sda: 78140160 512-byte hdwr sectors (40008 
MB)
Feb 20 22:06:17 kurtz sda: Write Protect is off
Feb 20 22:06:17 kurtz sda: Mode Sense: 00 3a 00 00
Feb 20 22:06:17 kurtz SCSI device sda: drive cache: write back
Feb 20 22:06:17 kurtz sda: sda1 sda2 sda3 < sda5 sda6 > sda4
Feb 20 22:06:17 kurtz sd 0:0:0:0: Attached scsi disk sda

The CDROM on the second ide channel was not recognized (what's up with that 
WARNING?). And the HD was pretty slow (around 1-2 MB/s), I guess that's 
because UDMA support is not there yet?

Regards,

  Francesco


-- 
Dr. Francesco Biscani
Dipartimento di Astronomia
Università di Padova
biscani@pd.astro.it

Re: libata PATA drivers patch for 2.6.16-rc4

[Mark Lord]

[-- Attachment #1: Type: text/plain, Size: 374 bytes --]

Francesco Biscani wrote:
>
> Feb 20 22:06:17 kurtz ata2(0): WARNING: ATAPI is disabled, device ignored.
..
> The CDROM on the second ide channel was not recognized (what's up with that 
> WARNING?).

Dunno.  For some odd reason libata still doesn't want to handle ATAPI
devices out-of-the-box.  There's a boot/module option for it, though,
as well as this patch (attached).

[-- Attachment #2: 01_libata_atapi_enabled.patch --]
[-- Type: text/x-patch, Size: 427 bytes --]

--- linux.old/drivers/scsi/libata-core.c	2006-02-14 12:10:33.000000000 -0500
+++ linux/drivers/scsi/libata-core.c	2006-02-16 11:42:58.000000000 -0500
@@ -78,7 +78,7 @@
 static unsigned int ata_unique_id = 1;
 static struct workqueue_struct *ata_wq;
 
-int atapi_enabled = 0;
+int atapi_enabled = 1;
 module_param(atapi_enabled, int, 0444);
 MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)");
 

Re: libata PATA drivers patch for 2.6.16-rc4

[Alan Cox]

On Llu, 2006-02-20 at 22:26 +0100, Francesco Biscani wrote:
> The CDROM on the second ide channel was not recognized (what's up with that 
> WARNING?). And the HD was pretty slow (around 1-2 MB/s), I guess that's 
> because UDMA support is not there yet?

UDMA support is there and was selected. Older chip revisions have
special handing for LBA48 (large disks/large requests) but I thought I
had that all sorted now so wouldn't expect such a hit.

Please send me an lspci -vxx

Thanks.

Re: libata PATA drivers patch for 2.6.16-rc4

[Francesco Biscani]

On Monday 20 February 2006 23:12, Mark Lord wrote:
> Dunno.  For some odd reason libata still doesn't want to handle ATAPI
> devices out-of-the-box.  There's a boot/module option for it, though,
> as well as this patch (attached).

Thanks! Now I see the cdrom drive, albeit as /dev/sdb... (see other mail)

-- 
Dr. Francesco Biscani
Dipartimento di Astronomia
Università di Padova
biscani@pd.astro.it

Re: libata PATA drivers patch for 2.6.16-rc4

[Francesco Biscani]

[-- Attachment #1: Type: text/plain, Size: 950 bytes --]

On Monday 20 February 2006 23:57, Alan Cox wrote:
> UDMA support is there and was selected. Older chip revisions have
> special handing for LBA48 (large disks/large requests) but I thought I
> had that all sorted now so wouldn't expect such a hit.
>
> Please send me an lspci -vxx
>
> Thanks.

lspci -vxx and dmesg attached. I have disabled all under IDE menu, I'm running 
only on libata now. With the patch from Mark Lord I can see the cdrom drive, 
but as /dev/sdb, not /dev/sr0, and I have some messages like

ATA: abnormal status 0x58 on port 0x177

(see dmesg). Haven't tested much, but apart from the speed issue it seems 
stable. hdparm -Tt says:

/dev/sda:
 Timing cached reads:   1124 MB in  2.00 seconds = 561.57 MB/sec
 Timing buffered disk reads:    8 MB in  3.76 seconds =   2.13 MB/sec

Regards,

  Francesco

-- 
Dr. Francesco Biscani
Dipartimento di Astronomia
Università di Padova
biscani@pd.astro.it

[-- Attachment #2: dmesg.log --]
[-- Type: text/x-log, Size: 14743 bytes --]

Linux version 2.6.16-rc4-morph1-exp (yardbird@kurtz) (gcc version 4.1.0-pre20060219 (prerelease)) #7 Tue Feb 21 03:05:17 CET 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d8000 - 00000000000e0000 (reserved)
 BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001bf70000 (usable)
 BIOS-e820: 000000001bf70000 - 000000001bf7c000 (ACPI data)
 BIOS-e820: 000000001bf7c000 - 000000001bf80000 (ACPI NVS)
 BIOS-e820: 000000001bf80000 - 000000001c000000 (reserved)
 BIOS-e820: 000000002bf80000 - 000000002c000000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
447MB LOWMEM available.
On node 0 totalpages: 114544
  DMA zone: 4096 pages, LIFO batch:0
  DMA32 zone: 0 pages, LIFO batch:0
  Normal zone: 110448 pages, LIFO batch:31
  HighMem zone: 0 pages, LIFO batch:0
DMI 2.3 present.
ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f6ab0
ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x1bf75284
ACPI: FADT (v001 ATI    Salmon   0x06040000 ATI  0x000f4240) @ 0x1bf7bf64
ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x1bf7bfd8
ACPI: DSDT (v001    ATI MS2_1535 0x06040000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x8008
Allocating PCI resources starting at 30000000 (gap: 2c000000:d3f80000)
Built 1 zonelists
Kernel command line: root=/dev/sda6 resume2=swap:/dev/sda5 video=radeonfb:ywrap,mtrr:2,1024x768-16 CONSOLE=/dev/tty1
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0410000 soft=c040f000
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 2391.845 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 450344k/458176k available (2235k kernel code, 7296k reserved, 726k data, 144k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4792.07 BogoMIPS (lpj=2396036)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: After vendor identify, caps: bfebf9ff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: bfebf9ff 00000000 00000000 00000080 00004400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU: Intel Mobile Intel(R) Pentium(R) 4     CPU 2.40GHz stepping 09
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0420)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd89b, last bus=2
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:10.0
PCI quirk: region 8000-803f claimed by ali7101 ACPI
PCI quirk: region 8040-805f claimed by ali7101 SMB
Boot video device is 0000:01:05.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK0] (IRQs 7 10) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 7 *10)
ACPI: PCI Interrupt Link [LNK2] (IRQs 7 *10)
ACPI: PCI Interrupt Link [LNK3] (IRQs 7 *10)
ACPI: PCI Interrupt Link [LNK4] (IRQs 7 10) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 7 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK6] (IRQs 7 10) *0, disabled.
ACPI: PCI Interrupt Link [LNK7] (IRQs *5)
ACPI: PCI Interrupt Link [LNK8] (IRQs 7 10) *0, disabled.
ACPI: Embedded Controller [EC0] (gpe 24) interrupt mode.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
pnp: 00:07: ioport range 0x40b-0x40b has been reserved
pnp: 00:07: ioport range 0x480-0x48f has been reserved
pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:07: ioport range 0x4d6-0x4d6 has been reserved
pnp: 00:07: ioport range 0x8000-0x807f could not be reserved
PCI: Bridge: 0000:00:01.0
  IO window: 9000-9fff
  MEM window: d0300000-d03fffff
  PREFETCH window: d8000000-dfffffff
PCI: Bus 2, cardbus bridge: 0000:00:0a.0
  IO window: 00001800-000018ff
  IO window: 00001c00-00001cff
  PREFETCH window: 30000000-31ffffff
  MEM window: 32000000-33ffffff
PCI: Enabling device 0000:00:0a.0 (0000 -> 0003)
ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNK5] -> GSI 11 (level, low) -> IRQ 11
Simple Boot Flag at 0x37 set to 0x1
Machine check exception polling timer started.
IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
Loading Reiser4. See www.namesys.com for a description of Reiser4.
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Activating ISA DMA hang workarounds.
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected Ati IGP345M chipset
agpgart: AGP aperture is 64M @ 0xd4000000
ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNK0] -> GSI 10 (level, low) -> IRQ 10
radeonfb: Retrieved PLL infos from BIOS
radeonfb: Reference=14.32 MHz (RefDiv=31) Memory=183.00 Mhz, System=133.00 MHz
radeonfb: PLL min 12000 max 35000
Non-DDC laptop panel detected
radeonfb: Monitor 1 type LCD found
radeonfb: Monitor 2 type no found
radeonfb: panel ID string: LGP                     
radeonfb: detected LVDS panel size from BIOS: 1024x768
radeondb: BIOS provided dividers will be used
radeonfb: Dynamic Clock Power Management enabled
Console: switching to colour frame buffer device 128x48
radeonfb (0000:01:05.0): ATI Radeon C7 
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Lid Switch [LID]
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
Using specific hotkey driver
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Thermal Zone [THRM] (51 C)
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
natsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002
  originally by Donald Becker <becker@scyld.com>
  http://www.scyld.com/network/natsemi.html
  2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNK1] -> GSI 10 (level, low) -> IRQ 10
natsemi eth0: NatSemi DP8381[56] at 0xd0008000 (0000:00:12.0), 00:0f:20:22:06:e5, IRQ 10, port TP.
libata version 1.20 loaded.
ACPI: PCI Interrupt 0000:00:10.0[A]: no GSI
ata1: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x2040 irq 14
ata1: dev 0 cfg 49:0f00 82:746b 83:7fe8 84:4023 85:f469 86:3e48 87:4023 88:203f
ata1: dev 0 ATA-6, max UDMA/100, 78140160 sectors: LBA48
ata1: dev 0 configured for UDMA/100
scsi0 : ali
  Vendor: ATA       Model: IC25N040ATMR04-0  Rev: MO2O
  Type:   Direct-Access                      ANSI SCSI revision: 05
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2048 irq 15
ata2: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0000
ata2: dev 0 ATAPI, max MWDMA2
ata2: dev 0 configured for MWDMA2
scsi1 : ali
ata2: command 0xa0 timeout, stat 0x58 host_stat 0x1
  Vendor:           Model:                   Rev:     
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3 < sda5 sda6 > sda4
sd 0:0:0:0: Attached scsi disk sda
ATA: abnormal status 0x58 on port 0x177
ATA: abnormal status 0x58 on port 0x177
ATA: abnormal status 0x58 on port 0x177
sd 1:0:0:0: Attached scsi disk sdb
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNK5] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:00:0a.0 [0000:0000]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0a.0, mfunc 0x01111112, devctl 0x64
Yenta: ISA IRQ mask 0x04f8, PCI irq 11
Socket status: 30000006
mice: PS/2 mouse device common for all mice
Advanced Linux Sound Architecture Driver Version 1.0.11rc2 (Wed Jan 04 08:57:20 2006 UTC).
PCI: Enabling device 0000:00:06.0 (0005 -> 0007)
ACPI: PCI Interrupt Link [LNK7] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNK7] -> GSI 5 (level, low) -> IRQ 5
input: AT Translated Set 2 keyboard as /class/input/input0
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb3, caps: 0x904713/0x10008
input: SynPS/2 Synaptics TouchPad as /class/input/input1
AC'97 1 does not respond - RESET
AC'97 1 access is not valid [0xffffffff], removing mixer.
ali mixer 1 creating error.
ALSA device list:
  #0: ALI 5451 at 0x1000, irq 5
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 4, 65536 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
acpi-cpufreq: CPU0 - ACPI performance management activated.
Using IPI Shortcut mode
ACPI wakeup devices: 
PCI0 MDEM  LAN  LID 
ACPI: (supports S0 S3 S4 S5)
VFS: Mounted root (reiser4 filesystem) readonly.
Freeing unused kernel memory: 144k freed
cs: IO port probe 0x100-0x3af: excluding 0x200-0x207 0x220-0x22f 0x2f8-0x2ff 0x330-0x337 0x370-0x37f 0x388-0x38f
cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNK2] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:0b.0: UHCI Host Controller
uhci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:0b.0: irq 10, io base 0x00002000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LNK3] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:0b.1: UHCI Host Controller
uhci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:0b.1: irq 10, io base 0x00002020
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: Enabling device 0000:00:0b.2 (0010 -> 0012)
ACPI: PCI Interrupt 0000:00:0b.2[C] -> Link [LNK5] -> GSI 11 (level, low) -> IRQ 11
PCI: Via IRQ fixup for 0000:00:0b.2, from 255 to 11
ehci_hcd 0000:00:0b.2: EHCI Host Controller
ehci_hcd 0000:00:0b.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:0b.2: irq 11, io mem 0xd0003000
ehci_hcd 0000:00:0b.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
Realtime LSM initialized (group 10, mlock=1)
loop: loaded (max 8 devices)
usb 3-3: new high speed USB device using ehci_hcd and address 3
usb 3-3: configuration #1 chosen from 1 choice
usb 1-2: new low speed USB device using uhci_hcd and address 2
usb 1-2: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.0-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
  Vendor: WDC WD80  Model: 0UE-22HCT0        Rev: 0000
  Type:   Direct-Access                      ANSI SCSI revision: 00
SCSI device sdc: 156301488 512-byte hdwr sectors (80026 MB)
sdc: Write Protect is off
sdc: Mode Sense: 27 00 00 00
sdc: assuming drive cache: write through
SCSI device sdc: 156301488 512-byte hdwr sectors (80026 MB)
sdc: Write Protect is off
sdc: Mode Sense: 27 00 00 00
sdc: assuming drive cache: write through
 sdc: sdc1 sdc2
sd 2:0:0:0: Attached scsi disk sdc
usb-storage: device scan complete
eth0: DSPCFG accepted after 0 usec.
eth0: link up.
eth0: Setting full-duplex based on negotiated link capability.
ip_tables: (C) 2000-2006 Netfilter Core Team
ip_conntrack version 2.4 (3579 buckets, 28632 max) - 232 bytes per conntrack
microcode: CPU0 updated from revision 0x1a to 0x2f, date = 08112004 
ata2: command 0xa0 timeout, stat 0x58 host_stat 0x1
ATA: abnormal status 0x58 on port 0x177
ATA: abnormal status 0x58 on port 0x177
ATA: abnormal status 0x58 on port 0x177
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNK0] -> GSI 10 (level, low) -> IRQ 10
[drm] Initialized radeon 1.23.0 20051229 on minor 0
mtrr: 0xd8000000,0x8000000 overlaps existing 0xd8000000,0x4000000
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:05.0 into 4x mode
[drm] Setting GART location based on new memory map
[drm] writeback test succeeded in 1 usecs
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:05.0 into 4x mode

[-- Attachment #3: lspci.log --]
[-- Type: text/x-log, Size: 7732 bytes --]

00:00.0 Host bridge: ATI Technologies Inc RS200/RS200M AGP Bridge [IGP 340M] (rev 02)
	Flags: bus master, 66MHz, medium devsel, latency 64
	Memory at d4000000 (32-bit, prefetchable) [size=64M]
	Memory at d0009000 (32-bit, prefetchable) [size=4K]
	Capabilities: [a0] AGP version 2.0
00: 02 10 b2 cb 06 00 30 02 02 00 00 06 00 40 00 00
10: 08 00 00 d4 08 90 00 d0 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00

00:01.0 PCI bridge: ATI Technologies Inc PCI Bridge [IGP 340M] (prog-if 00 [Normal decode])
	Flags: bus master, 66MHz, medium devsel, latency 99
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
	I/O behind bridge: 00009000-00009fff
	Memory behind bridge: d0300000-d03fffff
	Prefetchable memory behind bridge: d8000000-dfffffff
00: 02 10 10 70 07 00 20 02 00 00 04 06 00 63 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 44 91 91 20 02
20: 30 d0 30 d0 00 d8 f0 df 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 0c 00

00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device (rev 02)
	Subsystem: Hewlett-Packard Company Unknown device 0850
	Flags: bus master, medium devsel, latency 64, IRQ 5
	I/O ports at 1000 [size=256]
	Memory at d0000000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [dc] Power Management version 2
00: b9 10 51 54 07 00 90 c2 02 00 01 04 00 40 00 00
10: 01 10 00 00 00 00 00 d0 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 50 08
30: 00 00 00 00 dc 00 00 00 00 00 00 00 05 01 02 18

00:07.0 ISA bridge: ALi Corporation M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+]
	Subsystem: ALi Corporation ALi M1533 Aladdin IV/V ISA Bridge
	Flags: bus master, medium devsel, latency 0
	Capabilities: [a0] Power Management version 1
00: b9 10 33 15 0f 00 10 02 00 00 01 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 b9 10 33 15
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00

00:08.0 Modem: ALi Corporation M5457 AC'97 Modem Controller (prog-if 00 [Generic])
	Subsystem: Hewlett-Packard Company Unknown device 0850
	Flags: medium devsel, IRQ 255
	Memory at d0001000 (32-bit, non-prefetchable) [disabled] [size=4K]
	I/O ports at 1400 [disabled] [size=256]
	Capabilities: [40] Power Management version 2
00: b9 10 57 54 00 00 90 02 00 00 03 07 00 40 00 00
10: 00 10 00 d0 01 14 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 50 08
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 00 00

00:0a.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 02)
	Flags: bus master, medium devsel, latency 168, IRQ 11
	Memory at d0002000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
	Memory window 0: 30000000-31fff000 (prefetchable)
	Memory window 1: 32000000-33fff000
	I/O window 0: 00001800-000018ff
	I/O window 1: 00001c00-00001cff
	16-bit legacy interface ports at 0001
00: 4c 10 50 ac 07 00 10 02 02 00 07 06 20 a8 02 00
10: 00 20 00 d0 a0 00 00 02 00 02 05 b0 00 00 00 30
20: 00 f0 ff 31 00 00 00 32 00 f0 ff 33 00 18 00 00
30: fc 18 00 00 00 1c 00 00 fc 1c 00 00 0b 01 c0 05
40: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0b.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Unknown device 0850
	Flags: bus master, medium devsel, latency 64, IRQ 10
	I/O ports at 2000 [size=32]
	Capabilities: [80] Power Management version 2
00: 06 11 38 30 15 00 10 02 50 00 03 0c 08 40 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 20 00 00 00 00 00 00 00 00 00 00 3c 10 50 08
30: 00 00 00 00 80 00 00 00 00 00 00 00 0a 01 00 00

00:0b.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Unknown device 0850
	Flags: bus master, medium devsel, latency 64, IRQ 10
	I/O ports at 2020 [size=32]
	Capabilities: [80] Power Management version 2
00: 06 11 38 30 15 00 10 02 50 00 03 0c 08 40 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 21 20 00 00 00 00 00 00 00 00 00 00 3c 10 50 08
30: 00 00 00 00 80 00 00 00 00 00 00 00 0a 02 00 00

00:0b.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) (prog-if 20 [EHCI])
	Subsystem: Hewlett-Packard Company Unknown device 0850
	Flags: bus master, medium devsel, latency 64, IRQ 11
	Memory at d0003000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [80] Power Management version 2
00: 06 11 04 31 16 00 10 02 51 20 03 0c 20 40 80 00
10: 00 30 00 d0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 50 08
30: 00 00 00 00 80 00 00 00 00 00 00 00 0b 03 00 00

00:0c.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
	Subsystem: Hewlett-Packard Company Unknown device 0850
	Flags: medium devsel, IRQ 255
	Memory at d0003800 (32-bit, non-prefetchable) [disabled] [size=2K]
	Memory at d0004000 (32-bit, non-prefetchable) [disabled] [size=16K]
	Capabilities: [44] Power Management version 2
00: 4c 10 26 80 10 00 10 02 00 10 00 0c 08 40 00 00
10: 00 38 00 d0 00 40 00 d0 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 50 08
30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 01 02 04

00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c4) (prog-if fa)
	Subsystem: Hewlett-Packard Company Unknown device 0850
	Flags: bus master, medium devsel, latency 32
	I/O ports at 2040 [size=16]
	Capabilities: [60] Power Management version 2
00: b9 10 29 52 05 00 90 02 c4 fa 01 01 00 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 41 20 00 00 00 00 00 00 00 00 00 00 3c 10 50 08
30: 00 00 00 00 60 00 00 00 00 00 00 00 00 01 02 04

00:11.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
	Subsystem: Hewlett-Packard Company Unknown device 0850
	Flags: medium devsel
00: b9 10 01 71 00 00 00 02 00 00 80 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 50 08
30: 00 00 00 00 e4 00 00 00 00 00 00 00 00 00 00 00

00:12.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
	Subsystem: Hewlett-Packard Company Unknown device 0850
	Flags: bus master, medium devsel, latency 90, IRQ 10
	I/O ports at 2400 [size=256]
	Memory at d0008000 (32-bit, non-prefetchable) [size=4K]
	[virtual] Expansion ROM at 34000000 [disabled] [size=64K]
	Capabilities: [40] Power Management version 2
00: 0b 10 20 00 07 00 90 02 00 00 00 02 00 5a 00 00
10: 01 24 00 00 00 80 00 d0 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 50 08
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 0b 34

01:05.0 VGA compatible controller: ATI Technologies Inc Radeon IGP 330M/340M/350M (prog-if 00 [VGA])
	Subsystem: Hewlett-Packard Company Radeon IGP 345M
	Flags: bus master, stepping, fast Back2Back, 66MHz, medium devsel, latency 66, IRQ 10
	Memory at d8000000 (32-bit, prefetchable) [size=128M]
	I/O ports at 9000 [size=256]
	Memory at d0300000 (32-bit, non-prefetchable) [size=64K]
	[virtual] Expansion ROM at d0320000 [disabled] [size=128K]
	Capabilities: [58] AGP version 2.0
	Capabilities: [50] Power Management version 2
00: 02 10 37 43 87 02 b0 02 00 00 00 03 08 42 00 00
10: 08 00 00 d8 01 90 00 00 00 00 30 d0 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 50 08
30: 00 00 00 00 58 00 00 00 00 00 00 00 ff 01 08 00

Re: libata PATA drivers patch for 2.6.16-rc4

[Ed Sweetman]

[-- Attachment #1: Type: text/plain, Size: 778 bytes --]

With this patch set and the attached config.  Nvidia Nforce4 chipset 
from asus A8N-E with pata and sata enabled (no ide drivers) I get the 
following error i copied by hand (half assed) during bootup.

Process Swapper  "lots of addresses"

Backtrace
ata_device_add+1183
RIP stext 2146431208  RSP ffff810002f41cb0
Bad RIP value
Kernel Panic - Not Syncing ... Tried to kill INIT

I even tried the other patch that supposedly fixes the problem that 
occurs when fixating discs by jeff Garzik and it doesn't change anything.




Alan Cox wrote:

>Various fixes and cleanups, some new functionality notably Promise
>20246/2026x support which although basic should get it going with disk.
>Not 100% sure about ATAPI on PDC2026x yet.
>
>http://zeniv.linux.org.uk/~alan/IDE
>
>  
>




[-- Attachment #2: config-2.6.16-rc4 --]
[-- Type: text/plain, Size: 31990 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.16-rc4
# Wed Feb 22 19:39:53 2006
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_UID16=y
CONFIG_VM86=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y

#
# Block layer
#
# CONFIG_LBD is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VSMP is not set
CONFIG_MK8=y
# CONFIG_MPSC is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_MICROCODE=m
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
CONFIG_SMP=y
# CONFIG_SCHED_SMT is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_NR_CPUS=2
# CONFIG_HOTPLUG_CPU is not set
CONFIG_HPET_TIMER=y
CONFIG_X86_PM_TIMER=y
# CONFIG_HPET_EMULATE_RTC is not set
# CONFIG_GART_IOMMU is not set
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x100000
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
CONFIG_GENERIC_PENDING_IRQ=y

#
# Power management options
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_AC=m
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=y
# CONFIG_ACPI_HOTKEY is not set
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_CONTAINER=m

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#
# CPUFreq processor drivers
#
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_POWERNOW_K8_ACPI=y
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_ACPI_CPUFREQ is not set

#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_UNORDERED_IO is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY_PROC=y

#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set

#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=y
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=m
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set

#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set

#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=m

#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_PNPACPI=y

#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set

#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y

#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_MV is not set
CONFIG_SCSI_SATA_NV=y
# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
# CONFIG_SCSI_SATA_SIL24 is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
# CONFIG_SCSI_SATA_VIA is not set
# CONFIG_SCSI_SATA_VITESSE is not set
# CONFIG_SCSI_PATA_ALI is not set
CONFIG_SCSI_PATA_AMD=y
# CONFIG_SCSI_PATA_ARTOP is not set
# CONFIG_SCSI_PATA_ATIIXP is not set
# CONFIG_SCSI_PATA_CMD64X is not set
# CONFIG_SCSI_PATA_CS5520 is not set
# CONFIG_SCSI_PATA_CS5530 is not set
# CONFIG_SCSI_PATA_CYPRESS is not set
# CONFIG_SCSI_PATA_EFAR is not set
# CONFIG_SCSI_ATA_GENERIC is not set
# CONFIG_SCSI_PATA_HPT37X is not set
# CONFIG_SCSI_PATA_HPT3X2N is not set
# CONFIG_SCSI_PATA_HPT3X3 is not set
# CONFIG_SCSI_PATA_ISAPNP is not set
# CONFIG_SCSI_PATA_IT8172 is not set
# CONFIG_SCSI_PATA_IT821X is not set
# CONFIG_SCSI_PATA_LEGACY is not set
# CONFIG_SCSI_PATA_MPIIX is not set
# CONFIG_SCSI_PATA_NETCELL is not set
# CONFIG_SCSI_PATA_NS87410 is not set
# CONFIG_SCSI_PATA_OLDPIIX is not set
# CONFIG_SCSI_PATA_OPTI is not set
# CONFIG_SCSI_PATA_PCMCIA is not set
# CONFIG_SCSI_PATA_PDC_OLD is not set
# CONFIG_SCSI_PATA_QDI is not set
# CONFIG_SCSI_PATA_RADISYS is not set
# CONFIG_SCSI_PATA_RZ1000 is not set
# CONFIG_SCSI_PATA_SC1200 is not set
# CONFIG_SCSI_PATA_SERVERWORKS is not set
# CONFIG_SCSI_PATA_SIL680 is not set
# CONFIG_SCSI_PATA_SIS is not set
# CONFIG_SCSI_PATA_TRIFLEX is not set
# CONFIG_SCSI_PATA_VIA is not set
# CONFIG_SCSI_PATA_WINBOND is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_LINEAR is not set
CONFIG_MD_RAID0=y
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_RAID6 is not set
# CONFIG_MD_MULTIPATH is not set
CONFIG_MD_FAULTY=m
# CONFIG_BLK_DEV_DM is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set

#
# ARCnet devices
#
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
# CONFIG_ARCNET_CAP is not set
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
CONFIG_ARCNET_COM20020=m
CONFIG_ARCNET_COM20020_PCI=m

#
# PHY device support
#
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=y
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
CONFIG_FORCEDETH=y
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=m
# CONFIG_R8169_NAPI is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
CONFIG_SK98LIN=m
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
CONFIG_INPUT_UINPUT=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_ACPI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256

#
# IPMI
#
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
# CONFIG_IPMI_POWEROFF is not set

#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_I8XX_TCO is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
CONFIG_HANGCHECK_TIMER=m

#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set

#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_ISA=m
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Hardware Monitoring support
#
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia Capabilities Port drivers
#

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m

#
# Video For Linux
#

#
# Video Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_SAA6588 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
# CONFIG_VIDEO_AUDIO_DECODER is not set
# CONFIG_VIDEO_DECODER is not set

#
# Radio Adapters
#
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m

#
# Graphics support
#
# CONFIG_FB is not set
CONFIG_VIDEO_SELECT=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_RTCTIMER=y
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_AC97_BUS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_PWC is not set

#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_GL620A is not set
CONFIG_USB_NET_NET1080=m
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
CONFIG_USB_NET_ZAURUS=m
# CONFIG_USB_MON is not set

#
# USB port drivers
#

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set

#
# USB DSL modem support
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# SN Devices
#

#
# EDAC - error detection and reporting (RAS)
#
# CONFIG_EDAC is not set

#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set

#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_XATTR is not set
CONFIG_CIFS_EXPERIMENTAL=y
# CONFIG_CIFS_UPCALL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m

#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set

#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=15

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_AES_X86_64 is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m

#
# Hardware crypto devices
#

#
# Library routines
#
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m

Re: libata PATA drivers patch for 2.6.16-rc4

[Alan Cox]

On Mer, 2006-02-22 at 23:05 -0500, Ed Sweetman wrote:
> With this patch set and the attached config.  Nvidia Nforce4 chipset 
> from asus A8N-E with pata and sata enabled (no ide drivers) I get the 
> following error i copied by hand (half assed) during bootup.
> 
> Process Swapper  "lots of addresses"

Thanks for all the reports on the oops on boot. I was able to duplicate
it and fix the dumb bug that caused it.

New patch (2.6.16-rc4-ide2)

	http://zeniv.linux.org.uk/~alan/IDE

Re: libata PATA drivers patch for 2.6.16-rc4

[Luca]

Alan Cox <alan@lxorguk.ukuu.org.uk> ha scritto:
> Various fixes and cleanups, some new functionality notably Promise
> 20246/2026x support which although basic should get it going with disk.
> Not 100% sure about ATAPI on PDC2026x yet.
> 
> http://zeniv.linux.org.uk/~alan/IDE

Hi Alan,
I just tested the patch on my desktop (VIA VT8233A) and on my notebook
(SiS 5513): it boots correctly and performance (hdparm -T) looks good.
With atapi_enable all optical drives are recognized; I didn't try
burning (I'm out of disks...), but I'll do the test if it's useful.

This is the desktop:

lspci:
00:11.0 ISA bridge: VIA Technologies, Inc. VT8233A ISA Bridge
        Subsystem: VIA Technologies, Inc. VT8233A ISA Bridge
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
        Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32
        Interrupt: pin A routed to IRQ 11
        Region 4: I/O ports at d400 [size=16]
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

dmesg:
libata version 1.20 loaded.
pata_via 0000:00:11.1: version 0.1.4
acpi_bus-0201 [01] bus_set_power         : Device is not power manageable
ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 11
ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xD400 irq 14
via_do_set_mode: Mode=8 ast broken=Y udma=133 mul=4
ata1: dev 0 cfg 49:2f00 82:7c6b 83:7b09 84:4003 85:7c69 86:3a01 87:4003 88:407f
ata1: dev 0 ATA-7, max UDMA/133, 240121728 sectors: LBA
via_do_set_mode: Mode=8 ast broken=Y udma=133 mul=4
ata1: dev 1 cfg 49:0f00 82:346b 83:4001 84:4000 85:3469 86:0001 87:4000 88:101f
ata1: dev 1 ATA-4, max UDMA/66, 20044080 sectors: LBA
via_do_set_mode: Mode=12 ast broken=Y udma=133 mul=4
via_do_set_mode: Mode=69 ast broken=Y udma=133 mul=4
ata1: dev 0 configured for UDMA/100
via_do_set_mode: Mode=12 ast broken=Y udma=133 mul=4
via_do_set_mode: Mode=68 ast broken=Y udma=133 mul=4
ata1: dev 1 configured for UDMA/66
scsi0 : pata_via
  Vendor: ATA       Model: Maxtor 6Y120L0    Rev: YAR4
  Type:   Direct-Access                      ANSI SCSI revision: 05
  Vendor: ATA       Model: QUANTUM FIREBALL  Rev: A03.
  Type:   Direct-Access                      ANSI SCSI revision: 05
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xD408 irq 15
via_do_set_mode: Mode=8 ast broken=Y udma=133 mul=4
ata2: dev 0 cfg 49:0b00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407
ata2: dev 0 ATAPI, max UDMA/33
via_do_set_mode: Mode=8 ast broken=Y udma=133 mul=4
ata2: dev 1 cfg 49:0b00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407
ata2: dev 1 ATAPI, max UDMA/33
via_do_set_mode: Mode=12 ast broken=Y udma=133 mul=4
via_do_set_mode: Mode=66 ast broken=Y udma=133 mul=4
ata2: dev 0 configured for UDMA/33
via_do_set_mode: Mode=12 ast broken=Y udma=133 mul=4
via_do_set_mode: Mode=66 ast broken=Y udma=133 mul=4
ata2: dev 1 configured for UDMA/33
scsi1 : pata_via
  Vendor: _NEC      Model: DVD_RW ND-1300A   Rev: 1.0A
  Type:   CD-ROM                             ANSI SCSI revision: 05
  Vendor: WAITEC    Model: ALADAR/1          Rev: B1.5
  Type:   CD-ROM                             ANSI SCSI revision: 05
SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
 sda: sda1 sda2 < sda5 sda6 sda7 sda8 > sda3
sd 0:0:0:0: Attached scsi disk sda
SCSI device sdb: 20044080 512-byte hdwr sectors (10263 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 20044080 512-byte hdwr sectors (10263 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
 sdb: sdb1 sdb2
sd 0:0:1:0: Attached scsi disk sdb
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr1: scsi3-mmc drive: 16x/40x writer cd/rw xa/form2 cdda tray
sr 1:0:1:0: Attached scsi CD-ROM sr1
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:1:0: Attached scsi generic sg1 type 0
sr 1:0:0:0: Attached scsi generic sg2 type 5
sr 1:0:1:0: Attached scsi generic sg3 type 5

And this is the notebook:

lspci:
0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS962 [MuTIOL Media IO] (rev 04)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0

0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (prog-if 80 [Master])
	Subsystem: ASUSTeK Computer Inc.: Unknown device 1658
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32
	Region 4: I/O ports at b800 [size=16]
	Capabilities: [58] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

dmesg:

libata version 1.20 loaded.
pata_sis 0000:00:02.5: version 0.1
ata1: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xB800 irq 14
ata1: dev 0 cfg 49:0f00 82:746b 83:49a8 84:4003 85:f469 86:0808 87:4003 88:203f
ata1: dev 0 ATA-5, max UDMA/100, 78140160 sectors: LBA
ata1: dev 0 configured for UDMA/100
scsi0 : pata_sis
  Vendor: ATA       Model: IC25N040ATCS04-0  Rev: CA4O
  Type:   Direct-Access                      ANSI SCSI revision: 05
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xB808 irq 15
ata2: dev 0 cfg 49:0b00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407
ata2: dev 0 ATAPI, max UDMA/33
ata2: dev 0 configured for UDMA/33
scsi1 : pata_sis
  Vendor: MATSHITA  Model: UJDA740 DVD/CDRW  Rev: 1.01
  Type:   CD-ROM                             ANSI SCSI revision: 05
SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
 sda: sda1 sda2 < sda5 sda6 >
sd 0:0:0:0: Attached scsi disk sda
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5


Luca
-- 
Home: http://kronoz.cjb.net
K.R.O.N.O.S
Kinetic Replicant Optimized for Nocturnal Observation and Sabotage

Re: libata PATA drivers patch for 2.6.16-rc4

[Francesco Biscani]

On Thursday 23 February 2006 16:07, Alan Cox wrote:
> Thanks for all the reports on the oops on boot. I was able to duplicate
> it and fix the dumb bug that caused it.
>
> New patch (2.6.16-rc4-ide2)
>
> 	http://zeniv.linux.org.uk/~alan/IDE

Hello Alan,

the latest patch has not solved the performance problems on my laptop's Ali 
chipset. Just to let you know....

Thanks,

  Francesco

-- 
Dr. Francesco Biscani
Dipartimento di Astronomia
Università di Padova
biscani@pd.astro.it

Re: libata PATA drivers patch for 2.6.16-rc4

[Chris Boot]

Alan Cox wrote:
> On Mer, 2006-02-22 at 23:05 -0500, Ed Sweetman wrote:
>> With this patch set and the attached config.  Nvidia Nforce4 chipset 
>> from asus A8N-E with pata and sata enabled (no ide drivers) I get the 
>> following error i copied by hand (half assed) during bootup.
>>
>> Process Swapper  "lots of addresses"
> 
> Thanks for all the reports on the oops on boot. I was able to duplicate
> it and fix the dumb bug that caused it.
> 
> New patch (2.6.16-rc4-ide2)
> 
> 	http://zeniv.linux.org.uk/~alan/IDE

-ide2 fixes my boot-time oops as well, cheers.

Chris

-- 
Chris Boot
bootc@bootc.net
http://www.bootc.net/

Re: libata PATA drivers patch for 2.6.16-rc4

[Ed Sweetman]

With this patchset (ide2) i'm able to boot.  I'm still unable to fixate 
cds, however.  Even with the patchset from Garzik that was posted 
before.  Though, with Garzik's patch, i recieve no errors in dmesg 
output.  Prior to Garzik's patch i recieved this error when fixating discs.


Feb 22 17:37:23 psuedomode kernel: Assertion failed! qc->n_elem > 
0,drivers/scsi/libata-core.c,ata_fill_sg,line=2586


(yes i know psuedo is spelled wrong)

Chris Boot wrote:

> Alan Cox wrote:
>
>> On Mer, 2006-02-22 at 23:05 -0500, Ed Sweetman wrote:
>>
>>> With this patch set and the attached config.  Nvidia Nforce4 chipset 
>>> from asus A8N-E with pata and sata enabled (no ide drivers) I get 
>>> the following error i copied by hand (half assed) during bootup.
>>>
>>> Process Swapper  "lots of addresses"
>>
>>
>> Thanks for all the reports on the oops on boot. I was able to duplicate
>> it and fix the dumb bug that caused it.
>>
>> New patch (2.6.16-rc4-ide2)
>>
>>     http://zeniv.linux.org.uk/~alan/IDE
>
>
> -ide2 fixes my boot-time oops as well, cheers.
>
> Chris
>