From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751107AbWCKGRj (ORCPT ); Sat, 11 Mar 2006 01:17:39 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751157AbWCKGRj (ORCPT ); Sat, 11 Mar 2006 01:17:39 -0500 Received: from gw.goop.org ([64.81.55.164]:45256 "EHLO mail.goop.org") by vger.kernel.org with ESMTP id S1751107AbWCKGRi (ORCPT ); Sat, 11 Mar 2006 01:17:38 -0500 Message-ID: <4412321B.6030006@goop.org> Date: Fri, 10 Mar 2006 18:12:43 -0800 From: Jeremy Fitzhardinge User-Agent: Thunderbird 1.5 (X11/20060210) MIME-Version: 1.0 To: Linux Kernel Mailing List CC: davej@redhat.com Subject: 2.6.15-1.2032_FC5 (2.6.16rc5-git9?): Losing ticks with x86_64 w/ Nvidia chipset Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org It seems my system is losing interrupts. It regularly emits the message: Losing some ticks... checking if CPU frequency changed. and it seems to lose mouse movements and button presses. I also wonder if this is also the cause of my problems with ripping CDs; I'll post separately about that problem, but it seems to be that the ide driver is losing interrupts and failing to recover. This is a Shuttle SN95V10 board, with Nvidia nforce 3 chipset. I'm running FC5 test 3, with kernel 2.6.15-1.2032_FC5, which appears to be built from 2.6.16rc5-git9. I'm using the nvidia driver for my nvidia graphics card, but I get the same problems without it, just using the plain "nv" driver. Any clues on how I can track down the problem here? Should I try booting with acpi=off or something? Thanks, J Details: /proc/interrupts: CPU0 0: 7972830 IO-APIC-edge timer 7: 2 IO-APIC-edge parport0 8: 0 IO-APIC-edge rtc 9: 0 IO-APIC-level acpi 15: 285841 IO-APIC-edge ide1 16: 350874 IO-APIC-level libata, NVidia CK8S 17: 377726 IO-APIC-level skge, nvidia 18: 1775120 IO-APIC-level ehci_hcd:usb1 19: 2432 IO-APIC-level ohci_hcd:usb2 20: 0 IO-APIC-level ohci_hcd:usb3 21: 30350 IO-APIC-level ohci1394 NMI: 1281 LOC: 7973266 ERR: 0 MIS: 0 lspci: 00:00.0 Host bridge: nVidia Corporation nForce3 250Gb Host Bridge (rev a1) 00:01.0 ISA bridge: nVidia Corporation nForce3 250Gb LPC Bridge (rev a2) 00:01.1 SMBus: nVidia Corporation nForce 250Gb PCI System Management (rev a1) 00:02.0 USB Controller: nVidia Corporation CK8S USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation CK8S USB Controller (rev a1) 00:02.2 USB Controller: nVidia Corporation nForce3 EHCI USB 2.0 Controller (rev a2) 00:06.0 Multimedia audio controller: nVidia Corporation nForce3 250Gb AC'97 Audio Controller (rev a1) 00:08.0 IDE interface: nVidia Corporation CK8S Parallel ATA Controller (v2.5) (rev a2) 00:0a.0 IDE interface: nVidia Corporation CK8S Serial ATA Controller (v2.5) (rev a2) 00:0b.0 PCI bridge: nVidia Corporation nForce3 250Gb AGP Host to PCI Bridge (rev a2) 00:0e.0 PCI bridge: nVidia Corporation nForce3 250Gb PCI-to-PCI Bridge (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configu ration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600/GeForce 6600 GT] (rev a2) 02:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) 02:08.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13) lspci -v 00:00.0 Host bridge: nVidia Corporation nForce3 250Gb Host Bridge (rev a1) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Unknown device a551 Flags: bus master, 66MHz, fast devsel, latency 0 Memory at e0000000 (32-bit, prefetchable) [size=256M] Capabilities: [44] HyperTransport: Slave or Primary Interface Capabilities: [c0] AGP version 3.0 00:01.0 ISA bridge: nVidia Corporation nForce3 250Gb LPC Bridge (rev a2) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Unknown device a551 Flags: bus master, 66MHz, fast devsel, latency 0 00:01.1 SMBus: nVidia Corporation nForce 250Gb PCI System Management (rev a1) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Unknown device a551 Flags: 66MHz, fast devsel, IRQ 10 I/O ports at ff00 [size=32] I/O ports at 4c00 [size=64] I/O ports at 4c40 [size=64] Capabilities: [44] Power Management version 2 00:02.0 USB Controller: nVidia Corporation CK8S USB Controller (rev a1) (prog-if 10 [OHCI]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Unknown device a551 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 19 Memory at fdfff000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 00:02.1 USB Controller: nVidia Corporation CK8S USB Controller (rev a1) (prog-if 10 [OHCI]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Unknown device a551 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 Memory at fdffe000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 00:02.2 USB Controller: nVidia Corporation nForce3 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Unknown device a551 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 18 Memory at fdffd000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port Capabilities: [80] Power Management version 2 00:06.0 Multimedia audio controller: nVidia Corporation nForce3 250Gb AC'97 Audio Controller (rev a1) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Unknown device a551 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 16 I/O ports at f200 [size=256] I/O ports at fc00 [size=128] Memory at fdffc000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 00:08.0 IDE interface: nVidia Corporation CK8S Parallel ATA Controller (v2.5) (rev a2) (prog-if 8a [Maste r SecP PriP]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Unknown device a551 Flags: bus master, 66MHz, fast devsel, latency 0 I/O ports at fa00 [size=16] Capabilities: [44] Power Management version 2 00:0a.0 IDE interface: nVidia Corporation CK8S Serial ATA Controller (v2.5) (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Unknown device a551 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 16 I/O ports at 09f0 [size=8] I/O ports at 0bf0 [size=4] I/O ports at 0970 [size=8] I/O ports at 0b70 [size=4] I/O ports at f500 [size=16] I/O ports at f400 [size=128] Capabilities: [44] Power Management version 2 00:0b.0 PCI bridge: nVidia Corporation nForce3 250Gb AGP Host to PCI Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, 66MHz, medium devsel, latency 16 Bus: primary=00, secondary=01, subordinate=01, sec-latency=10 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fa000000-fcffffff Prefetchable memory behind bridge: d0000000-dfffffff 00:0e.0 PCI bridge: nVidia Corporation nForce3 250Gb PCI-to-PCI Bridge (rev a2) (prog-if 00 [Normal decod e]) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=128 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: fdd00000-fddfffff 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configu ration Flags: fast devsel Capabilities: [80] HyperTransport: Host or Secondary Interface 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Flags: fast devsel 01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600/GeForce 6600 GT] (rev a2) (prog- if 00 [VGA]) Flags: bus master, 66MHz, medium devsel, latency 248, IRQ 17 Memory at fa000000 (32-bit, non-prefetchable) [size=16M] Memory at d0000000 (32-bit, prefetchable) [size=256M] Memory at fb000000 (32-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at fc000000 [disabled] [size=128K] Capabilities: [60] Power Management version 2 Capabilities: [44] AGP version 3.0 02:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) (prog-if 10 [OHCI ]) Subsystem: VIA Technologies, Inc. IEEE 1394 Host Controller Flags: bus master, stepping, medium devsel, latency 32, IRQ 21 Memory at fdeff000 (32-bit, non-prefetchable) [size=2K] I/O ports at df00 [size=128] Capabilities: [50] Power Management version 2 02:08.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Unknown device c231 Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17 Memory at fdef8000 (32-bit, non-prefetchable) [size=16K] I/O ports at dc00 [size=256] [virtual] Expansion ROM at fdd00000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Capabilities: [50] Vital Product Data : minilith:pts/0; ugg lspci -v 00:00.0 Host bridge: nVidia Corporation nForce3 250Gb Host Bridge (rev a1) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Unknown device a551 Flags: bus master, 66MHz, fast devsel, latency 0 Memory at e0000000 (32-bit, prefetchable) [size=256M] Capabilities: [44] HyperTransport: Slave or Primary Interface Capabilities: [c0] AGP version 3.0 00:01.0 ISA bridge: nVidia Corporation nForce3 250Gb LPC Bridge (rev a2) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Unknown device a551 Flags: bus master, 66MHz, fast devsel, latency 0 00:01.1 SMBus: nVidia Corporation nForce 250Gb PCI System Management (rev a1) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Unknown device a551 Flags: 66MHz, fast devsel, IRQ 10 I/O ports at ff00 [size=32] I/O ports at 4c00 [size=64] I/O ports at 4c40 [size=64] Capabilities: [44] Power Management version 2 00:02.0 USB Controller: nVidia Corporation CK8S USB Controller (rev a1) (prog-if 10 [OHCI]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Unknown device a551 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 19 Memory at fdfff000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 00:02.1 USB Controller: nVidia Corporation CK8S USB Controller (rev a1) (prog-if 10 [OHCI]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Unknown device a551 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 Memory at fdffe000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 00:02.2 USB Controller: nVidia Corporation nForce3 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Unknown device a551 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 18 Memory at fdffd000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port Capabilities: [80] Power Management version 2 00:06.0 Multimedia audio controller: nVidia Corporation nForce3 250Gb AC'97 Audio Controller (rev a1) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Unknown device a551 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 16 I/O ports at f200 [size=256] I/O ports at fc00 [size=128] Memory at fdffc000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 00:08.0 IDE interface: nVidia Corporation CK8S Parallel ATA Controller (v2.5) (rev a2) (prog-if 8a [Master SecP PriP]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Unknown device a551 Flags: bus master, 66MHz, fast devsel, latency 0 I/O ports at fa00 [size=16] Capabilities: [44] Power Management version 2 00:0a.0 IDE interface: nVidia Corporation CK8S Serial ATA Controller (v2.5) (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Unknown device a551 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 16 I/O ports at 09f0 [size=8] I/O ports at 0bf0 [size=4] I/O ports at 0970 [size=8] I/O ports at 0b70 [size=4] I/O ports at f500 [size=16] I/O ports at f400 [size=128] Capabilities: [44] Power Management version 2 00:0b.0 PCI bridge: nVidia Corporation nForce3 250Gb AGP Host to PCI Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, 66MHz, medium devsel, latency 16 Bus: primary=00, secondary=01, subordinate=01, sec-latency=10 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fa000000-fcffffff Prefetchable memory behind bridge: d0000000-dfffffff 00:0e.0 PCI bridge: nVidia Corporation nForce3 250Gb PCI-to-PCI Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=128 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: fdd00000-fddfffff 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Flags: fast devsel Capabilities: [80] HyperTransport: Host or Secondary Interface 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Flags: fast devsel 01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600/GeForce 6600 GT] (rev a2) (prog-if 00 [VGA]) Flags: bus master, 66MHz, medium devsel, latency 248, IRQ 17 Memory at fa000000 (32-bit, non-prefetchable) [size=16M] Memory at d0000000 (32-bit, prefetchable) [size=256M] Memory at fb000000 (32-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at fc000000 [disabled] [size=128K] Capabilities: [60] Power Management version 2 Capabilities: [44] AGP version 3.0 02:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) (prog-if 10 [OHCI]) Subsystem: VIA Technologies, Inc. IEEE 1394 Host Controller Flags: bus master, stepping, medium devsel, latency 32, IRQ 21 Memory at fdeff000 (32-bit, non-prefetchable) [size=2K] I/O ports at df00 [size=128] Capabilities: [50] Power Management version 2 02:08.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Unknown device c231 Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17 Memory at fdef8000 (32-bit, non-prefetchable) [size=16K] I/O ports at dc00 [size=256] [virtual] Expansion ROM at fdd00000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Capabilities: [50] Vital Product Data dmesg output: Bootdata ok (command line is ro root=/dev/VolGroup00/LogVol00 quiet ) Linux version 2.6.15-1.2032_FC5 (bhcompile@hs20-bc1-5.build.redhat.com) (gcc version 4.1.0 20060304 (Red Hat 4.1.0-2)) #1 SMP Tue Mar 7 22:18:30 EST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009c000 (usable) BIOS-e820: 000000000009c000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) ACPI: RSDP (v000 XPC ) @ 0x00000000000f8fd0 ACPI: RSDT (v001 XPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff3040 ACPI: FADT (v001 XPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff30c0 ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @ 0x000000003fff7880 ACPI: MADT (v001 XPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff77c0 ACPI: DSDT (v001 XPC SN95V20 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000 Scanning NUMA topology in Northbridge 24 Number of nodes 1 Node 0 MemBase 0000000000000000 Limit 000000003fff0000 NUMA: Using 63 for the hash shift. Using node hash shift of 63 Bootmem setup node 0 0000000000000000-000000003fff0000 On node 0 totalpages: 256780 DMA zone: 2779 pages, LIFO batch:0 DMA32 zone: 254001 pages, LIFO batch:31 Normal zone: 0 pages, LIFO batch:0 HighMem zone: 0 pages, LIFO batch:0 Nvidia board detected. Ignoring ACPI timer override. ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:15 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Setting APIC routing to physical flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) Checking aperture... CPU 0: aperture @ e0000000 size 256 MB SMP: Allowing 2 CPUs, 1 hotplug CPUs Built 1 zonelists Kernel command line: ro root=/dev/VolGroup00/LogVol00 quiet Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. time.c: Detected 2210.789 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Memory: 1023472k/1048512k available (2320k kernel code, 24640k reserved, 1211k data, 196k init) Calibrating delay using timer specific routine.. 4426.38 BogoMIPS (lpj=8852779) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0(1) -> Node 0 -> Core 0 Using local APIC timer interrupts. result 12561301 Detected 12.561 MHz APIC timer. Brought up 1 CPUs testing NMI watchdog ... OK. 0 checking if image is initramfs... it is Freeing initrd memory: 1837k freed DMI 2.2 present. NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: Power Resource [ISAV] (on) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 10 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report agpgart: Detected AGP bridge 0 agpgart: Setting up Nforce3 AGP. agpgart: AGP aperture is 256M @ 0xe0000000 PCI-DMA: Disabling IOMMU. pnp: 00:00: ioport range 0x4000-0x407f could not be reserved pnp: 00:00: ioport range 0x4080-0x40ff has been reserved pnp: 00:00: ioport range 0x4400-0x447f has been reserved pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved pnp: 00:00: ioport range 0x4800-0x487f has been reserved pnp: 00:00: ioport range 0x4880-0x48ff has been reserved PCI: Bridge: 0000:00:0b.0 IO window: e000-efff MEM window: fa000000-fcffffff PREFETCH window: d0000000-dfffffff PCI: Bridge: 0000:00:0e.0 IO window: d000-dfff MEM window: fde00000-fdefffff PREFETCH window: fdd00000-fddfffff PCI: Setting latency timer of device 0000:00:0e.0 to 64 IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ audit: initializing netlink socket (disabled) audit(1141981243.568:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key ABAB1965D89C5E80 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Fan [FAN] (on) ACPI: Thermal Zone [THRM] (51 C) Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE3-250: IDE controller at PCI slot 0000:00:08.0 NFORCE3-250: chipset revision 162 NFORCE3-250: not 100% native mode: will probe irqs later NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller ide0: BM-DMA at 0xfa00-0xfa07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xfa08-0xfa0f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... Probing IDE interface ide1... hdc: PLEXTOR DVDR PX-712A, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide0... hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver libusual usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.0) powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x2 (1500 mV) powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x6 (1400 mV) powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xa (1300 mV) powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV) cpu_init done, current fid 0xe, vid 0x2 ACPI wakeup devices: HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1 ACPI: (supports S0 S1 S4 S5) Freeing unused kernel memory: 196k freed Write protecting the kernel read-only data: 435k SCSI subsystem initialized libata version 1.20 loaded. sata_nv 0000:00:0a.0: version 0.8 ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23 GSI 16 sharing vector 0xB1 and IRQ 16 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APSJ] -> GSI 23 (level, high) -> IRQ 16 PCI: Setting latency timer of device 0000:00:0a.0 to 64 ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xF500 irq 16 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xF508 irq 16 ata1: SATA link up 1.5 Gbps (SStatus 113) ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4043 85:7c69 86:3e01 87:4043 88:407f ata1: dev 0 ATA-7, max UDMA/133, 586114704 sectors: LBA48 nv_sata: Primary device added nv_sata: Primary device removed nv_sata: Secondary device removed ata1: dev 0 configured for UDMA/133 scsi0 : sata_nv ata2: SATA link down (SStatus 0) scsi1 : sata_nv Vendor: ATA Model: Maxtor 6B300S0 Rev: BANC Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 586114704 512-byte hdwr sectors (300091 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 586114704 512-byte hdwr sectors (300091 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sd 0:0:0:0: Attached scsi disk sda device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 GSI 17 sharing vector 0xB9 and IRQ 17 ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 17 skge 1.3 addr 0xfdef8000 irq 17 chip Yukon-Lite rev 7 skge eth0: addr 00:30:1b:b5:dd:8f i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40 sd 0:0:0:0: Attached scsi generic sg0 type 0 ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 GSI 18 sharing vector 0xC1 and IRQ 18 ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 22 (level, high) -> IRQ 18 PCI: Setting latency timer of device 0000:00:02.2 to 64 ehci_hcd 0000:00:02.2: EHCI Host Controller ehci_hcd 0000:00:02.2: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.2 ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.2: irq 18, io mem 0xfdffd000 ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 GSI 19 sharing vector 0xC9 and IRQ 19 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, high) -> IRQ 19 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 19, io mem 0xfdfff000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20 GSI 20 sharing vector 0xD1 and IRQ 20 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 20 (level, high) -> IRQ 20 PCI: Setting latency timer of device 0000:00:02.1 to 64 ohci_hcd 0000:00:02.1: OHCI Host Controller ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:02.1: irq 20, io mem 0xfdffe000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 17 NVRM: loading NVIDIA Linux x86_64 NVIDIA Kernel Module 1.0-8178 Wed Dec 14 16:58:07 PST 2005 ieee1394: Initialized config rom entry `ip1394' usb 1-3: new high speed USB device using ehci_hcd and address 4 ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 GSI 21 sharing vector 0xD9 and IRQ 21 ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 21 PCI: Via IRQ fixup for 0000:02:07.0, from 10 to 5 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[21] MMIO=[fdeff000-fdeff7ff] Max Packet=[2048] IR/IT contexts=[4/8] usb 1-3: configuration #1 chosen from 1 choice Initializing USB Mass Storage driver... usb 2-1: new low speed USB device using ohci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice input: Logitech Logitech USB Keyboard as /class/input/input0 input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:02.0-1 input: Logitech Logitech USB Keyboard as /class/input/input1 input: USB HID v1.10 Mouse [Logitech Logitech USB Keyboard] on usb-0000:00:02.0-1 usb 2-2: new low speed USB device using ohci_hcd and address 3 usb 2-2: configuration #1 chosen from 1 choice input: Logitech USB RECEIVER as /class/input/input2 input: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:02.0-2 scsi2 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning usbcore: registered new driver usb-storage USB Mass Storage support registered. ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 23 (level, high) -> IRQ 16 PCI: Setting latency timer of device 0000:00:06.0 to 64 ieee1394: Host added: ID:BUS[0-00:1023] GUID[00301bb50000ddf3] ieee1394: Node added: ID:BUS[0-01:1023] GUID[000a270002592e4e] ieee1394: Node added: ID:BUS[0-03:1023] GUID[000a27000401f4a2] intel8x0_measure_ac97_clock: measured 58700 usecs intel8x0: clocking to 46960 video1394: Installed video1394 module ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) ieee1394: sbp2: Try serialize_io=0 for better performance scsi3 : SBP-2 IEEE-1394 ieee1394: raw1394: /dev/raw1394 device initialized ieee1394: sbp2: Logged into SBP-2 device ieee1394: Node 0-01:1023: Max speed [S400] - Max payload [2048] Vendor: Apple Model: iPod Rev: 1.53 Type: Direct-Access-RBC ANSI SCSI revision: 02 sdb: Spinning up disk....<5> Vendor: ATECH Model: FLASH-CFC Rev: 019D Type: Direct-Access ANSI SCSI revision: 00 sd 2:0:0:0: Attached scsi removable disk sdc sd 2:0:0:0: Attached scsi generic sg1 type 0 Vendor: ATECH Model: FLASH-SDC Rev: 019D Type: Direct-Access ANSI SCSI revision: 00 sd 2:0:0:1: Attached scsi removable disk sdd sd 2:0:0:1: Attached scsi generic sg2 type 0 Vendor: ATECH Model: FLASH-SMC Rev: 019D Type: Direct-Access ANSI SCSI revision: 00 sd 2:0:0:2: Attached scsi removable disk sde sd 2:0:0:2: Attached scsi generic sg3 type 0 Vendor: ATECH Model: FLASH-MSC Rev: 019D Type: Direct-Access ANSI SCSI revision: 00 sd 2:0:0:3: Attached scsi removable disk sdf sd 2:0:0:3: Attached scsi generic sg4 type 0 usb-storage: device scan complete ready SCSI device sdb: 78126048 512-byte hdwr sectors (40001 MB) sdb: test WP failed, assume Write Enabled sdb: asking for cache data failed sdb: assuming drive cache: write through SCSI device sdb: 78126048 512-byte hdwr sectors (40001 MB) sdb: test WP failed, assume Write Enabled sdb: asking for cache data failed sdb: assuming drive cache: write through sdb: [mac] sdb1 sdb2 sdb3 sd 3:0:0:0: Attached scsi removable disk sdb sd 3:0:0:0: Attached scsi generic sg5 type 14 Non-volatile memory driver v1.2 floppy0: no floppy controllers found parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). lp0: console ready ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ibm_acpi: ec object not found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:2031608k NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.base_reachable_time; Use net.ipv6.neigh.lo.base_reachable_time_ms instead. skge eth0: enabling interface ADDRCONF(NETDEV_UP): eth0: link is not ready skge eth0: Link is up at 1000 Mbps, full duplex, flow control tx and rx ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Bluetooth: Core ver 2.8 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: HIDP (Human Interface Emulation) ver 1.1 it87: Found IT8712F chip at 0x290, revision 6 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode ieee1394: Node changed: 0-03:1023 -> 0-02:1023 ieee1394: Node suspended: ID:BUS[0-01:1023] GUID[000a270002592e4e] Losing some ticks... checking if CPU frequency changed. loop: loaded (max 8 devices)