libata PATA patch for 2.6.16-rc5

libata PATA patch for 2.6.16-rc5

[Alan Cox]

This is at
	http://zeniv.linux.org.uk/~alan/IDE

Some more fixes, and the ALi driver should now work although I've yet to
finish the MWDMA work or finish chasing down the slow performance.

Re: libata PATA patch for 2.6.16-rc5

[Mathieu Chouquet-Stringer]

alan@lxorguk.ukuu.org.uk (Alan Cox) writes:
> Some more fixes, and the ALi driver should now work although I've yet to
> finish the MWDMA work or finish chasing down the slow performance.

What does your roadmap look like now? Will you feed these patches to Jeff
Garzik when 2.6.17 opens or will you wait to have most of the stuff you
labelled "core features" completed?

-- 
Mathieu Chouquet-Stringer

Re: libata PATA patch for 2.6.16-rc5

[Matthieu CASTET]

Hi,

Le Mon, 27 Feb 2006 15:32:50 +0000, Alan Cox a écrit :

> This is at
> 	http://zeniv.linux.org.uk/~alan/IDE
> 
> Some more fixes, and the ALi driver should now work although I've yet to
> finish the MWDMA work or finish chasing down the slow performance.

Is there some hardware that need more testing than others ?

I have machines with 
 VIA + SIL680
 PIIX + CMD648
 PIXX
 CMD640 + ISAPnp

But I am quite busy and can't test on all of them.

Matthieu

Re: libata PATA patch for 2.6.16-rc5

[Alan Cox]

On Llu, 2006-02-27 at 18:55 +0100, Mathieu Chouquet-Stringer wrote:
> What does your roadmap look like now? Will you feed these patches to Jeff
> Garzik when 2.6.17 opens or will you wait to have most of the stuff you
> labelled "core features" completed?

On the whole I'd like to see the core and most of the drivers pushed to
2.6.17 as experimental and merged with the main tree. The DMA CRC
changedown work is important before it leaves "experimental" status.

Up to Jeff and I need to discuss it with him next week.

Alan

Re: libata PATA patch for 2.6.16-rc5

[Christian Trefzer]

[-- Attachment #1: Type: text/plain, Size: 1148 bytes --]

On Mon, Feb 27, 2006 at 03:32:50PM +0000, Alan Cox wrote:
> This is at
> 	http://zeniv.linux.org.uk/~alan/IDE
> 

Got this working like a charm, although I had to add the promise 20269's
PCI IDs to ata_generic.c to make it tick. I only regard this as an
interim solution, but wanted to try out getting rid of IDE altogether.
So far it "feels" alright, using pata_via and ata_generic. Thanks a
bunch!


Regards,
Chris


Btw, here's the diff for convenience, in case of "interest":

--- a/drivers/scsi/ata_generic.c	2006-02-27 22:15:31.000000000 +0100
+++ b/drivers/scsi/ata_generic.c	2006-02-28 00:16:17.447430304 +0100
@@ -207,6 +207,7 @@
 	{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2),  },
+	{ PCI_DEVICE(PCI_VENDOR_ID_PROMISE,PCI_DEVICE_ID_PROMISE_20269),  },
 	/* Must come last. If you add entries adjust this table appropriately */
 	{ PCI_ANY_ID,		PCI_ANY_ID,			   PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 1},
 	{ 0, },

[-- Attachment #2: Type: application/pgp-signature, Size: 829 bytes --]

Re: libata PATA patch for 2.6.16-rc5

[Alan Cox]

On Maw, 2006-02-28 at 01:30 +0100, Christian Trefzer wrote:
> On Mon, Feb 27, 2006 at 03:32:50PM +0000, Alan Cox wrote:
> > This is at
> > 	http://zeniv.linux.org.uk/~alan/IDE
> > 
> 
> Got this working like a charm, although I had to add the promise 20269's
> PCI IDs to ata_generic.c to make it tick. I only regard this as an
> interim solution, but wanted to try out getting rid of IDE altogether.
> So far it "feels" alright, using pata_via and ata_generic. Thanks a
> bunch!

Thanks for the report. The PDC20268 and 2027x are driven by Albert Lee's
Promise driver which should end up in the main tree soon, probably
before my PATA bits. 

Re: libata PATA patch for 2.6.16-rc5

[Christian Trefzer]

[-- Attachment #1: Type: text/plain, Size: 514 bytes --]

On Tue, Feb 28, 2006 at 09:49:49AM +0000, Alan Cox wrote:
> 
> Thanks for the report. The PDC20268 and 2027x are driven by Albert Lee's
> Promise driver which should end up in the main tree soon, probably
> before my PATA bits. 
> 

That's weird, pata_pdc2027x.c is in the -rc5 tree, or at least after
applying your -ide1 patch, but the references in Kconfig and Makefile
are missing. Is this intentional? I'll try and scribble something up,
diff is about to follow.

Thanks for the pointer!

Chris

[-- Attachment #2: Type: application/pgp-signature, Size: 829 bytes --]

[PATCH] Add pata_pdc_2ß27x to Kconfig and Makefile (was: Re: libata PATA patch for 2.6.16-rc5)

[Christian Trefzer]

[-- Attachment #1: Type: text/plain, Size: 1538 bytes --]

On Tue, Feb 28, 2006 at 09:49:49AM +0000, Alan Cox wrote:

> Thanks for the report. The PDC20268 and 2027x are driven by Albert Lee's
> Promise driver which should end up in the main tree soon, probably
> before my PATA bits. 
> 

And this patch activates the thing in Kconfig. Build tested already,
boot test is yet to come. Will report back in a few minutes - if I did
not entirely mess up my boot environment, that is.

Regards,
Chris


--- a/drivers/scsi/Kconfig	2006-02-28 04:01:31.000000000 +0100
+++ b/drivers/scsi/Kconfig	2006-02-28 11:10:18.959828288 +0100
@@ -823,6 +823,15 @@
 
 	  If unsure, say N.
 
+config SCSI_PATA_PDC
+	tristate "Newer Promise PATA controller support (Raving Lunatic)"
+	depends on SCSI_SATA && PCI && EXPERIMENTAL
+	help
+	  This option enables support for the Promise 20268 through 20277
+	  adapters.
+
+	  If unsure, say N.
+
 config SCSI_PATA_QDI
 	tristate "QDI VLB PATA support"
 	depends on SCSI_SATA
--- a/drivers/scsi/Makefile	2006-02-28 04:01:31.000000000 +0100
+++ b/drivers/scsi/Makefile	2006-02-28 11:07:11.751066376 +0100
@@ -162,6 +162,7 @@
 obj-$(CONFIG_SCSI_PATA_OPTI)	+= libata.o pata_opti.o
 obj-$(CONFIG_SCSI_PATA_PCMCIA)	+= libata.o pata_pcmcia.o
 obj-$(CONFIG_SCSI_PATA_PDC_OLD)	+= libata.o pata_pdc202xx_old.o
+obj-$(CONFIG_SCSI_PATA_PDC)	+= libata.o pata_pdc2027x.o
 obj-$(CONFIG_SCSI_PATA_QDI)	+= libata.o pata_qdi.o
 obj-$(CONFIG_SCSI_PATA_RADISYS)	+= libata.o pata_radisys.o
 obj-$(CONFIG_SCSI_PATA_RZ1000)	+= libata.o pata_rz1000.o

[-- Attachment #2: Type: application/pgp-signature, Size: 829 bytes --]

Re: [PATCH] Add pata_pdc_2ß27x to Kconfig and Makefile (was: Re: libata PATA patch for 2.6.16-rc5)

[Christian Trefzer]

[-- Attachment #1: Type: text/plain, Size: 2387 bytes --]

Hi Alan,

the pata_pdc2027x driver works flawlessly AFAICT - the only weird thing about it would
be some duplicated init messages in dmesg:

pata_pdc2027x 0000:00:0c.0: version 0.73
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKD] -> GSI 3 (level, low) -> IRQ 3
pata_pdc2027x 0000:00:0c.0: PLL input clock 20020 kHz
ata3: PATA max UDMA/133 cmd 0xF08217C0 ctl 0xF0821FDA bmdma 0xF0821000 irq 3
ata4: PATA max UDMA/133 cmd 0xF08215C0 ctl 0xF0821DDA bmdma 0xF0821008 irq 3
ata3: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003 88:407f
ata3: dev 0 ATA-7, max UDMA/133, 234493056 sectors: LBA48
ata3: dev 0 configured for UDMA/133
scsi2 : pata_pdc2027x
ata4: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003 88:407f
ata4: dev 0 ATA-7, max UDMA/133, 234493056 sectors: LBA48
ata4: dev 0 configured for UDMA/133
scsi3 : pata_pdc2027x
  Vendor: ATA       Model: SAMSUNG SV1203N   Rev: TQ10
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 234493056 512-byte hdwr sectors (120060 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 234493056 512-byte hdwr sectors (120060 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
 sda: sda1 sda2
sd 2:0:0:0: Attached scsi disk sda
  Vendor: ATA       Model: SAMSUNG SV1203N   Rev: TQ10
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sdb: 234493056 512-byte hdwr sectors (120060 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 234493056 512-byte hdwr sectors (120060 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
 sdb: sdb1 sdb2
sd 3:0:0:0: Attached scsi disk sdb

It appears to me that some part of drive detection is done twice - at
least the output is generated redundantly. If this is a bug and not a
feature, maybe one issue of the output could be trimmed in the end.

There have been rumours about some Promise controller having trouble
with UDMA6 and the Linux drivers, but I am running this configuration
for quite some time now and never had the slightest problem.


Thanks, everyone, for the good stuff : )

Chris

[-- Attachment #2: Type: application/pgp-signature, Size: 829 bytes --]

Re: [PATCH] Add pata_pdc_2ß27x to Kconfig and Makefile (was: Re: libata PATA patch for 2.6.16-rc5)

[Christian Trefzer]

[-- Attachment #1: Type: text/plain, Size: 256 bytes --]

On Tue, Feb 28, 2006 at 11:41:23AM +0100, Christian Trefzer wrote:
> If this is a bug and not a feature,

               ^^^           ^^^^^^^
Please switch these. Damn, I really need to get some sleep - this is
_bad_ timing...


Sorry for the fuss,
Chris

[-- Attachment #2: Type: application/pgp-signature, Size: 829 bytes --]

Re: libata PATA patch for 2.6.16-rc5

[Krzysztof Halasa]

Alan Cox <alan@lxorguk.ukuu.org.uk> writes:

> On the whole I'd like to see the core and most of the drivers pushed to
> 2.6.17 as experimental and merged with the main tree. The DMA CRC
> changedown work is important before it leaves "experimental" status.

That would be nice.

BTW: with rc5 and patch-2.6.16-rc5-ide1.gz I get MWDMA2 (VIA EPIA-M,
I've sent you details with rc2-ide2 report):

ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xE000 irq 14
via_do_set_mode: Mode=8 ast broken=Y udma=133 mul=4
ata1: dev 0 cfg 49:0b00 82:0210 83:4000 84:4000 85:0000 86:0000 87:4000 88:0407
ata1: dev 0 ATAPI, max UDMA/33
via_do_set_mode: Mode=8 ast broken=Y udma=133 mul=4
via_do_set_mode: Mode=12 ast broken=Y udma=133 mul=4
via_do_set_mode: Mode=34 ast broken=Y udma=133 mul=4
ata1: dev 0 configured for MWDMA2
scsi0 : pata_via
  Vendor: LITE-ON   Model: DVD SOHD-16P9SV   Rev: F$01
  Type:   CD-ROM                             ANSI SCSI revision: 05


instead of UDMA/33 with patch-2.6.16-rc2-ide2.gz which does:
via_do_set_mode: Mode=12 ast broken=Y udma=133 mul=4
via_do_set_mode: Mode=66 ast broken=Y udma=133 mul=4
ata1: dev 0 configured for UDMA/33


"rmmod sr_mod" assertion warning is gone.

"rmmod pata_via" and then "modprobe pata_via" is still there:

ata3: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xE000 irq 14
Unable to handle kernel NULL pointer dereference at virtual address 00000000
 printing eip:
c01d0121
*pde = 00000000
Oops: 0000 [#1]
Modules linked in: pata_via cdrom libata scsi_mod lirc_serial lirc_dev via_agp agpgart via_rhine
CPU:    0
EIP:    0060:[<c01d0121>]    Not tainted VLI
EFLAGS: 00010206   (2.6.16-rc5-term-via #29) 
EIP is at make_class_name+0x31/0xb0
eax: 00000000   ebx: ffffffff   ecx: ffffffff   edx: 00000000
esi: 00000009   edi: 00000000   ebp: 00000000   esp: c6f83ca8
ds: 007b   es: 007b   ss: 0068
Process insmod (pid: 382, threadinfo=c6f83000 task=c6165a30)
Stack: <0>00000044 c618f1f0 000200d0 c02a8680 00000010 c10a9fa0 c6f83000 c7926204 
       c618f1f0 c7926204 c792620c c01d0226 c79261a0 00000000 00000246 c618f1f0 
       c618f000 c618f028 c618f280 c01d02e8 c618f0d0 c790edcd c618f280 00000000 
Call Trace:
 [<c01d0226>] class_device_del+0x86/0x140
 [<c01d02e8>] class_device_unregister+0x8/0x10
 [<c790edcd>] scsi_remove_host+0x7d/0xc0 [scsi_mod]
 [<c78fb99e>] ata_host_remove+0xe/0x20 [libata]
 [<c78ff40d>] ata_device_add+0x2fd/0xb80 [libata]
 [<c021a02f>] pci_read+0x1f/0x30
 [<c02188f9>] pcibios_set_master+0x19/0xa0
 [<c78fffe4>] ata_pci_init_one+0x354/0x390 [libata]
 [<c01cf860>] __driver_attach+0x0/0x60
 [<c01cf860>] __driver_attach+0x0/0x60
 [<c78ef688>] via_init_one+0x138/0x2a0 [pata_via]
 [<c018995b>] pci_device_probe+0x4b/0x70
 [<c01cf778>] driver_probe_device+0x38/0xb0
 [<c01cf8ba>] __driver_attach+0x5a/0x60
 [<c01ceda8>] bus_for_each_dev+0x38/0x70
 [<c01cf651>] driver_attach+0x11/0x20
 [<c01cf860>] __driver_attach+0x0/0x60
 [<c01cf0da>] bus_add_driver+0x6a/0x130
 [<c01cfbd0>] klist_devices_get+0x0/0x10
 [<c018953e>] __pci_register_driver+0x4e/0x90
 [<c01292df>] sys_init_module+0x12f/0x1690
 [<c0138e0e>] __handle_mm_fault+0x3ce/0x570
 [<c010e2c0>] do_page_fault+0x210/0x5fa
 [<c0102889>] syscall_call+0x7/0xb
Code: 1c 89 44 24 04 8b 40 3c 8b 10 31 ed bb ff ff ff ff 89 d9 89 d7 89 e8 f2 ae f7 d1 49 89 ce 8b 44 24 04 8b 50 08 89 d9 89 d7 89 e8 <f2> ae f7 d1 49 8d 44 0e 02 ba d0 00 00 00 e8 cc f5 f6 ff 89 04

Of course additional details are available on request.

Thanks,
-- 
Krzysztof Halasa

Re: libata PATA patch for 2.6.16-rc5

[Alan Cox]

On Maw, 2006-02-28 at 13:12 +0100, Krzysztof Halasa wrote:
> "rmmod pata_via" and then "modprobe pata_via" is still there:
> 
> ata3: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xE000 irq 14
> Unable to handle kernel NULL pointer dereference at virtual address 00000000


This appears to be a bug in the libata core code. I can duplicate it
with a NULL driver that simply fakes no devices attached. It definitely
needs looking at but I don't think its PATA caused at this moment. Of
course I may yet be wrong 8)

Alan

Re: libata PATA patch for 2.6.16-rc5

[Alan Cox]

On Maw, 2006-02-28 at 13:12 +0100, Krzysztof Halasa wrote:
> BTW: with rc5 and patch-2.6.16-rc5-ide1.gz I get MWDMA2 (VIA EPIA-M,
> I've sent you details with rc2-ide2 report):

Fixed in my tree. Thanks for noticing that.

Alan

Re: libata PATA patch for 2.6.16-rc5

[Francesco Biscani]

On Monday 27 February 2006 16:32, Alan Cox wrote:
> This is at
> 	http://zeniv.linux.org.uk/~alan/IDE
>
> Some more fixes, and the ALi driver should now work although I've yet to
> finish the MWDMA work or finish chasing down the slow performance.
>

Hello Alan,

  on ALi here devices are now recognized successfully. Some excerpts from the 
logs:

libata version 1.20 loaded.
ACPI: PCI Interrupt 0000:00:10.0[A]: no GSI
ata1: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x2040 irq 14
ata1: dev 0 cfg 49:0f00 82:746b 83:7fe8 84:4023 85:f469 86:3e48 87:4023 
88:203f
ata1: dev 0 ATA-6, max UDMA/100, 78140160 sectors: LBA48
ata1: dev 0 configured for UDMA/100
scsi0 : ali
  Vendor: ATA       Model: IC25N040ATMR04-0  Rev: MO2O
  Type:   Direct-Access                      ANSI SCSI revision: 05
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2048 irq 15
ata2: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 
88:0000
ata2: dev 0 ATAPI, max MWDMA2
ata2: dev 0 configured for PIO4
scsi1 : ali
  Vendor: HL-DT-ST  Model: RW/DVD GCC-4241N  Rev: 0C29
  Type:   CD-ROM                             ANSI SCSI revision: 05
SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3 < sda5 sda6 > sda4
sd 0:0:0:0: Attached scsi disk sda
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0

The improvement from the previous patch is that the cdrom is seen as "sr0" now 
(instead of "sdb") and the bogus warnings have disappeared. Performances are 
still low, as expected. Please tell me if I can do something else.

Thanks and regards,

  Francesco

-- 
Dr. Francesco Biscani
Dipartimento di Astronomia
Università di Padova
biscani@pd.astro.it

Re: libata PATA patch for 2.6.16-rc5

[Francesco Biscani]

I don't know if this is to be expected, but blanking of a cdrw fails here. 
Output of cdrecord is:

Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 J�g Schilling
cdrecord: Warning: Running on Linux-2.6.16-rc5-morph1
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   :
Vendor_info    : 'HL-DT-ST'
Identifikation : 'RW/DVD GCC-4241N'
Revision       : '0C29'
Device seems to be: Generic mmc2 DVD-ROM.
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
cdrecord: Input/output error. test unit ready: scsi sendcmd: no error
CDB:  00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.008s timeout 40s
cdrecord: No disk / Wrong disk

Regards,

  Francesco

-- 
Dr. Francesco Biscani
Dipartimento di Astronomia
Università di Padova
biscani@pd.astro.it

libata PATA patch for 2.6.16-rc5

[Chris Boot]

Hi Alan,

2.6.16-rc4-ide2 correctly identified my HP Colorado tape drive (which  
I haven't had a chance to use yet...), but 2.6.16-rc5-ide1 doesn't at  
all:

[4294687.689000] pata_via 0000:00:0f.1: version 0.1.4
[4294687.689000] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] - 
 > GSI 20 (level, low) -> IRQ 177
[4294687.689000] PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 1
[4294687.689000] ata5: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma  
0xD000 irq 14
[4294687.841000] via_do_set_mode: Mode=8 ast broken=Y udma=133 mul=4
[4294688.021000] ata5: dev 0 cfg 49:0f00 82:0218 83:4000 84:4000  
85:0218 86:0000 87:4000 88:101f
[4294688.021000] ata5: dev 0 ATAPI, max UDMA/66
[4294688.021000] via_do_set_mode: Mode=8 ast broken=Y udma=133 mul=4
[4294688.021000] via_do_set_mode: Mode=12 ast broken=Y udma=133 mul=4
[4294688.021000] via_do_set_mode: Mode=68 ast broken=Y udma=133 mul=4
[4294688.021000] ata5: dev 0 configured for UDMA/66
[4294688.021000] scsi4 : pata_via
[4294688.027000]   Vendor: PIONEER   Model: DVD-RW  DVR-110D  Rev: 1.39
[4294688.027000]   Type:   CD-ROM                             ANSI  
SCSI revision: 05
[4294688.127000] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2  
cdda tray
[4294688.127000] Uniform CD-ROM driver Revision: 3.20
[4294688.128000] sr 4:0:0:0: Attached scsi CD-ROM sr0
[4294688.128000] sr 4:0:0:0: Attached scsi generic sg4 type 5
[4294688.128000] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma  
0xD008 irq 15
[4294688.588000] via_do_set_mode: Mode=8 ast broken=Y udma=133 mul=4
[4294688.745000] ata6: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000  
85:0000 86:0000 87:0000 88:0000
[4294688.745000] ata6: dev 0 ATAPI, max MWDMA2
[4294688.745000] via_do_set_mode: Mode=8 ast broken=Y udma=133 mul=4
[4294688.785000] usb 1-1: new low speed USB device using uhci_hcd and  
address 4
[4294688.896000] ata6: PIO error
[4294688.896000] via_do_set_mode: Mode=12 ast broken=Y udma=133 mul=4
[4294688.896000] via_do_set_mode: Mode=34 ast broken=Y udma=133 mul=4
[4294688.896000] ata6: dev 0 configured for MWDMA2
[4294688.896000] scsi5 : pata_via

I'm guessing it's the PIO error, but I really don't have a clue.

HTH,
Chris

-- 
Chris Boot
bootc@bootc.net
http://www.bootc.net/

Re: libata PATA patch for 2.6.16-rc5

[matthieu castet]

[-- Attachment #1: Type: text/plain, Size: 650 bytes --]

Hi Alan,

Alan Cox wrote:
> On Llu, 2006-02-27 at 21:46 +0100, Matthieu CASTET wrote:
> 
>>Is there some hardware that need more testing than others ?
>>
>>I have machines with 
>> VIA + SIL680
>> PIIX + CMD648
>> PIXX
> 
> 
> Pretty sure the VIA is solid and the PIIX. SIL680 likewise now.
> 
I tried the PIIX and it seems there some problem with ATAPI.
My configuration is :
  - PM = ATA disk
  - PS = ATAPI drive
  - SM = nothing
  - SS = ATAPI drive

The problem is that pata core seems to detect and configure PS but PS 
doesn't seem present in the scsi layer.

I attach the dmesg log.
I also attach a hdparm -I of the failling drive.

Matthieu

[-- Attachment #2: pata_cd --]
[-- Type: text/plain, Size: 468 bytes --]


/dev/hdb:

ATAPI CD-ROM, with removable media
	Model Number:       CD-RW  CRX100E                          
	Firmware Revision:  1.0n    
Standards:
	Likely used CD-ROM ATAPI-1
Configuration:
	DRQ response: 50us.
	Packet size: 12 bytes
Capabilities:
	LBA, IORDY(can be disabled)
	DMA: sdma0 sdma1 sdma2 mdma0 mdma1 *mdma2 
	     Cycle time: min=120ns recommended=120ns
	PIO: pio0 pio1 pio2 pio3 pio4 
	     Cycle time: no flow control=180ns  IORDY flow control=120ns

[-- Attachment #3: pata_log --]
[-- Type: text/plain, Size: 7170 bytes --]

Linux version 2.6.16-rc5 (root@mat-pc) (gcc version 4.1.0 20060219 (prerelease) (Debian 4.1-0exp9)) #10 PREEMPT Sun Mar 5 18:58:38 CET 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003fffc000 (usable)
 BIOS-e820: 000000003fffc000 - 000000003ffff000 (ACPI data)
 BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 262140
  DMA zone: 4096 pages, LIFO batch:0
  DMA32 zone: 0 pages, LIFO batch:0
  Normal zone: 225280 pages, LIFO batch:31
  HighMem zone: 32764 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP (v000 ASUS                                  ) @ 0x000f58a0
ACPI: RSDT (v001 ASUS   P3B_F    0x30303031 MSFT 0x31313031) @ 0x3fffc000
ACPI: FADT (v001 ASUS   P3B_F    0x30303031 MSFT 0x31313031) @ 0x3fffc080
ACPI: BOOT (v001 ASUS   P3B_F    0x30303031 MSFT 0x31313031) @ 0x3fffc040
ACPI: DSDT (v001   ASUS P3B_F    0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: PM-Timer IO Port: 0xe408
Allocating PCI resources starting at 50000000 (gap: 40000000:bfff0000)
Built 1 zonelists
Kernel command line: root=/dev/sda1 ro init=/bin/sh lang=fr
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01803000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 601.447 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1036496k/1048560k available (1559k kernel code, 11484k reserved, 532k data, 136k init, 131056k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1204.57 BogoMIPS (lpj=2409158)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium III (Katmai) stepping 03
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0c20)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf08b0, last bus=1
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:04.1
PCI quirk: region e400-e43f claimed by PIIX4 ACPI
PCI quirk: region e800-e80f claimed by PIIX4 SMB
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
pnp: 00:03: ioport range 0xe400-0xe43f could not be reserved
pnp: 00:03: ioport range 0xe800-0xe80f has been reserved
PCI: Bridge: 0000:00:01.0
  IO window: disabled.
  MEM window: c6000000-c7dfffff
  PREFETCH window: c7f00000-cfffffff
Simple Boot Flag at 0x3a set to 0x1
Machine check exception polling timer started.
highmem bounce pool size: 64 pages
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Limiting direct PCI/PCI transfers.
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
libata version 1.20 loaded.
ata_piix 0000:00:04.1: version 1.05-ac7
ata1: PATA max UDMA/33 cmd 0x1F0 ctl 0x3F6 bmdma 0xD800 irq 14
ata1: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3c01 87:4003 88:043f
ata1: dev 0 ATA-7, max UDMA/100, 156368016 sectors: LBA48
ata1: dev 1 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0000
ata1: dev 1 ATAPI, max MWDMA2
ata1: dev 0 configured for UDMA/33
ata1: dev 1 configured for MWDMA2
scsi0 : ata_piix
  Vendor: ATA       Model: SAMSUNG SP0802N   Rev: TK10
  Type:   Direct-Access                      ANSI SCSI revision: 05
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xD808 irq 15
ata2: dev 1 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0000
ata2: dev 1 ATAPI, max MWDMA2
ata2: dev 1 configured for MWDMA2
scsi1 : ata_piix
  Vendor: SAMSUNG   Model: DVD-ROM SD-606F   Rev: 1.2 
  Type:   CD-ROM                             ANSI SCSI revision: 05
SCSI device sda: 156368016 512-byte hdwr sectors (80060 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 156368016 512-byte hdwr sectors (80060 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: Attached scsi disk sda
sr0: scsi3-mmc drive: 4x/32x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:1:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:1:0: Attached scsi generic sg1 type 5
usbmon: debugfs is not available
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
input: PC Speaker as /class/input/input1
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
TCP established hash table entries: 262144 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ACPI wakeup devices: 
PCI0 UAR1 UAR2 PS2K PS2M USB0 
ACPI: (supports S0 S1 S4 S5)
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 136k freed
kjournald starting.  Commit interval 5 seconds
input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
EXT3 FS on sda1, internal journal

Re: libata PATA patch for 2.6.16-rc5

[matthieu castet]

Hi,

matthieu castet wrote:
> Hi Alan
> 
> Alan Cox wrote:
> 
>> On Maw, 2006-02-28 at 23:36 +0100, matthieu castet wrote:
>>
>>> for the SIL680 I have a 100Mhz clock instead of a 133Mhz with ide/pci 
>>> driver [1]
>>
>>
>>
>> Fixed (missing break in switch)
>>
>>
>>> The ATAPI doesn't seem to work fine with VIA.
>>
>>
>>
>> Still investigating
>>
> If it can help you, I attach a log with debug enabled.
> 
Ok, I think I have a hint.

The drive that is failling is the secondary slave [1].
When I try to change xfermode with hdparm -X, it take some times (10 s) 
and I found an error in the kernel log.
But even with that error, it seem the xfermode is changed.

What happen with libata if we lose an interrupt ?


Matthieu




[1]
/dev/hdd:

ATAPI CD-ROM, with removable media
         Model Number:       CD-RW   CDR-6S48
         Serial Number:
         Firmware Revision:  SSG5
Standards:
         Used: ATAPI for CD-ROMs, SFF-8020i, r2.5
         Supported: CD-ROM ATAPI-2
Configuration:
         DRQ response: 50us.
         Packet size: 12 bytes
Capabilities:
         LBA, IORDY(cannot be disabled)
         DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2
              Cycle time: min=120ns recommended=120ns
         PIO: pio0 pio1 pio2 pio3 pio4
              Cycle time: no flow control=227ns  IORDY flow control=120ns

[2]
hdd: lost interrupt
hdd: CHECK for good STATUS

Re: [PATCH] Add pata_pdc_2ß27x to Kconfig and Makefile

[Tejun Heo]

Christian Trefzer wrote:
> It appears to me that some part of drive detection is done twice - at
> least the output is generated redundantly. If this is a bug and not a
> feature, maybe one issue of the output could be trimmed in the end.

That was a long standing bug (or feature in some twisted sense) of
SCSI midlayer.  I think it's gone now.

> There have been rumours about some Promise controller having trouble
> with UDMA6 and the Linux drivers, but I am running this configuration
> for quite some time now and never had the slightest problem.

Looks like you're running quite old kernel.

-- 
tejun

Re: [PATCH] Add pata_pdc_2ß27x to Kconfig and Makefile

[Christian Trefzer]

Hi Tejun,

On Tue, Oct 14, 2008 at 10:28:20AM +0900, Tejun Heo wrote:
> Looks like you're running quite old kernel.

Not for some time now, it appears some ancient email might have popped
up on top. My outbox archive says it went out on
Tue, 28 Feb 2006 11:41:23 +0100.

--
Kind regards,
Chris

Re: [PATCH] Add pata_pdc_2ß27x to Kconfig and Makefile

[Tejun Heo]

Christian Trefzer wrote:
> Hi Tejun,
> 
> On Tue, Oct 14, 2008 at 10:28:20AM +0900, Tejun Heo wrote:
>> Looks like you're running quite old kernel.
> 
> Not for some time now, it appears some ancient email might have popped
> up on top. My outbox archive says it went out on
> Tue, 28 Feb 2006 11:41:23 +0100.

Aieee... I just rebuilt the INBOX index and thunderbird thought it would
be fun to mark a mail from 2006.  Sorry about the noise.  :-)

-- 
tejun