Linux v2.6.16

Linux v2.6.16

[Linus Torvalds]

[-- Attachment #1: Type: TEXT/PLAIN, Size: 6722 bytes --]


Ok, it's being mirrored out right now, the git tree should already be all 
there, the tar-file and patches are still uploading.

Not a lot of changes since -rc6, but there's various random one-liners 
here and there (a number of Coverity bugs found, for example), and there 
are small MIPS and PowerPC updates.

Appended is the shortlog from 2.6.16-rc6, the full log (from 2.6.15) is on 
the web/ftp-sites. 

It looks like both Fedora and SuSE end up using a kernel that is pretty 
close to this 2.6.16 release, so let's all hope it's good. Give it a good 
testing, please,

		Linus

---
Adrian Bunk:
      [TG3] tg3_bus_string(): remove dead code
      SUNRPC: fix a NULL pointer dereference in net/sunrpc/clnt.c
      fs/namespace.c:dup_namespace(): fix a use after free

Al Viro:
      Fix ext2 readdir f_pos re-validation logic

Albrecht Dreß:
      [ARM] 3358/1: [S3C2410] add missing SPI DMA resources

Alessandro Zummo:
      [ARM] 3354/1: NAS100d: fix power led handling
      [ARM] 3355/1: NSLU2: remove propmt depends
      [ARM] 3350/1: Enable 1-wire on ARM

Alexey Kuznetsov:
      [NET]: Fix race condition in sk_wait_event().

Andi Kleen:
      x86-64: Fix up handling of non canonical user RIPs

Andrea Arcangeli:
      Remove obsolete CREDITS address

Andreas Herrmann:
      [SCSI] zfcp: correctly set this_id for hosts
      [SCSI] scsi_transport_fc: fix FC_HOST_NUM_ATTRS
      [SCSI] zfcp: fix device registration issues

Atsushi Nemoto:
      [MIPS] local_r4k_flush_cache_page fix

Ben Dooks:
      [ARM] 3363/1: [cleanup] process.c - fix warnings
      [ARM] 3364/1: [cleanup] warning fix - definitions for enable_hlt and disable_hlt
      [ARM] 3365/1: [cleanup] header for compat.c exported functions
      [ARM] 3362/1: [cleanup] - duplicate decleration of mem_fclk_21285

Benjamin Herrenschmidt:
      macintosh: correct AC Power info in /proc/pmu/info
      powerpc: enable NAP only on cpus who support it to avoid memory corruption

Brian Haley:
      [IPV6]: fix ipv6_saddr_score struct element

Catalin Marinas:
      [ARM] 3356/1: Workaround for the ARM1136 I-cache invalidation problem

Christoph Lameter:
      page migration: fail if page is in a vma flagged VM_LOCKED
      Page migration documentation update
      Consistent capabilites associated with MPOL_MOVE_ALL
      page migration: Fail with error if swap not setup
      time_interpolator: add __read_mostly
      fix race in pagevec_strip?

Dave Jones:
      [TUN]: Fix leak in tun_get_user()

Dave Kleikamp:
      JFS: Take logsync lock before testing mp->lsn

Dave Peterson:
      EDAC: disable sysfs interface

David Brownell:
      mtd_dataflash, fix block vs page erase

David S. Miller:
      [TCP]: Fix tcp_tso_should_defer() when limit>=65536
      e1000 endianness bugs

Dominik Brodowski:
      [SCSI] scsi: aha152x pcmcia driver needs spi transport

Eric Van Hensbergen:
      v9fs: fix overzealous dropping of dentry which breaks dcache

Eric W. Biederman:
      unshare: Use rcu_assign_pointer when setting sighand

GOTO Masanori:
      Fix sigaltstack corruption among cloned threads

Greg Smith:
      "s390: multiple subchannel sets support" fix

Gregor Maier:
      [NETFILTER]: Fix wrong option spelling in Makefile for CONFIG_BRIDGE_EBT_ULOG

Herbert Xu:
      [TCP]: Fix zero port problem in IPv6

Hong Liu:
      ieee80211: Fix QoS is not active problem

Hugh Dickins:
      fix free swap cache latency

Jesse Brandeburg:
      e100: fix eeh on pseries during ethtool -t

John Rose:
      powerpc: properly configure DDR/P5IOC children devs

Kevin Corry:
      dm stripe: Fix bounds

Linus Torvalds:
      Revert "x86-64: Fix up handling of non canonical user RIPs"
      Linux 2.6.16

Maneesh Soni:
      Plug kdump shutdown race window

Markus Rechberger:
      Fixed em28xx based system lockup

Matej Kupljen:
      [MIPS] Simple patch to power off DBAU1200

Matthew Wilcox:
      [SCSI] Add Brownie to blacklist

Michael Chan:
      [TG3]: 40-bit DMA workaround part 2

Michael Ellerman:
      powerpc: Clarify wording for CRASH_DUMP Kconfig option

Michael Hunold:
      Restore tuning capabilities in V4L2 MXB driver

Michael Krufky:
      Kconfig: swap VIDEO_CX88_ALSA and VIDEO_CX88_DVB

Michael Neuling:
      powerpc: RTC memory corruption

Nathan Scott:
      Fix a direct I/O locking issue revealed by the new mutex code.

Olaf Hering:
      powerpc: correct cacheflush loop in zImage
      powerpc/64: enable CONFIG_BLK_DEV_SL82C105
      powerpc: remove duplicate EXPORT_SYMBOLS

Oleg Nesterov:
      disable unshare(CLONE_VM) for now

Patrick McHardy:
      [NETFILTER]: nfnetlink_queue: fix possible NULL-ptr dereference
      [NET_SCHED]: act_api: fix skb leak in error path
      [XFRM]: Fix leak in ah6_input
      [NETLINK]: Fix use-after-free in netlink_recvmsg
      [TCP]: tcp_highspeed: fix AIMD table out-of-bounds access
      [IPV4/6]: Fix UFO error propagation
      [NETFILTER]: arp_tables: fix NULL pointer dereference

Paul Mackerras:
      powerpc: Disallow lparcfg being a module
      powerpc: Fix problem with time going backwards
      powerpc: update defconfigs

Pavel Machek:
      [ARM] 3357/1: enable frontlight on collie

Peter Staubach:
      nfsservctl(): remove user-triggerable printk

Ralf Baechle:
      Update MAINTAINERS entry for MIPS.
      [MIPS] Get rid of the IP22-specific code in arclib.
      [MIPS] SB1: Fix interrupt disable hazard.
      [MIPS] Work around bad code generation for <asm/io.h>.
      [MIPS] Protect more of timer_interrupt() by xtime_lock.
      [MIPS] Sibyte: Fix M_SCD_TIMER_INIT and M_SCD_TIMER_CNT wrong field width.
      [MIPS] Sibyte: Fix interrupt timer off by one bug.
      [MIPS] Sibyte: Fix race in sb1250_gettimeoffset().
      [MIPS] SB1: Check for -mno-sched-prolog if building corelis debug kernel.

Ralf Baechle DL5RB:
      [AX.25]: Fix potencial memory hole.

Roman Zippel:
      posix-timers: fix requeue accounting when signal is ignored

Russell King:
      [ARM] Fix muldi3.S
      [ARM] iwmmxt thread state alignment
      [ARM] Fix "thead" typo

Sam Ravnborg:
      kbuild: fix buffer overflow in modpost

Scott Bardone:
      [netdrvr] fix array overflows in Chelsio driver

Sergei Shtylylov:
      [MIPS] Fix DBAu1550 software power off.

Srivatsa Vaddagiri:
      x86: check for online cpus before bringing them up

Tejun Heo:
      ahci: fix NULL pointer dereference detected by Coverity

Trond Myklebust:
      NFS: Fix a potential panic in O_DIRECT
      NFSv4: fix mount segfault on errors returned that are < -1000
      SUNRPC: Fix potential deadlock in RPC code
      NLM: Ensure we do not Oops in the case of an unlock

Zhu Yi:
      ieee80211: Fix CCMP decryption problem when QoS is enabled

2.6.16.x will be a long-living kernel series

[Adrian Bunk]

As proposed some time ago [1], I'll continue the 2.6.16.x series after 
2.6.17 will be released.

A short FAQ is below.

cu
Adrian

[1] http://lkml.org/lkml/2005/12/3/55


Q:
What will be the rules for patch inclusion in the 2.6.16.x series?

A:
There will be more relaxed rules similar to the rules in kernel 2.4 
after the release of kernel 2.6.0 (e.g. driver updates will be allowed).


Q:
Why not start with the more relaxed rules before the release of 2.6.17?

A:
After 2.6.16.y following the usual stable rules, the kernel should be 
relatively stable and well-tested giving the best possible basis for a 
long-living series.


Q:
How long will this 2.6.16 series be maintained?

A:
That depends on how long people use it and contribute patches.


Q:
Stable API/ABI for external modules?

A:
No.

Re: 2.6.16.x will be a long-living kernel series

[Arjan van de Ven]

On Mon, 2006-03-20 at 13:02 +0100, Adrian Bunk wrote:
> As proposed some time ago [1], I'll continue the 2.6.16.x series after 
> 2.6.17 will be released.


ehh are you doing this as part of the regular stable effort ? Or in
parallel to that?

Re: 2.6.16.x will be a long-living kernel series

[Adrian Bunk]

On Mon, Mar 20, 2006 at 01:05:22PM +0100, Arjan van de Ven wrote:
> On Mon, 2006-03-20 at 13:02 +0100, Adrian Bunk wrote:
> > As proposed some time ago [1], I'll continue the 2.6.16.x series after 
> > 2.6.17 will be released.
> 
> 
> ehh are you doing this as part of the regular stable effort ? Or in
> parallel to that?

This seems to be the point I never manage to communicate correctly...

After 2.6.17 will be released, there will be the last regular 2.6.16.x 
kernel by Greg and Chris.

I'll continue the 2.6.16.x series _after_ this last regular stable 
kernel.

cu
Adrian

-- 

       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed

Re: 2.6.16.x will be a long-living kernel series

[Arjan van de Ven]

On Mon, 2006-03-20 at 13:12 +0100, Adrian Bunk wrote:
> On Mon, Mar 20, 2006 at 01:05:22PM +0100, Arjan van de Ven wrote:
> > On Mon, 2006-03-20 at 13:02 +0100, Adrian Bunk wrote:
> > > As proposed some time ago [1], I'll continue the 2.6.16.x series after 
> > > 2.6.17 will be released.
> > 
> > 
> > ehh are you doing this as part of the regular stable effort ? Or in
> > parallel to that?
> 
> This seems to be the point I never manage to communicate correctly...
> 
> After 2.6.17 will be released, there will be the last regular 2.6.16.x 
> kernel by Greg and Chris.

more like after 2.6.18, since they do 2 releases back nowadays

> 
> I'll continue the 2.6.16.x series _after_ this last regular stable 
> kernel.

ok

btw I don't really agree with your criteria, I would strongly suggest
that you keep using the "stable" criteria.

Re: 2.6.16.x will be a long-living kernel series

[Adrian Bunk]

On Mon, Mar 20, 2006 at 02:03:42PM +0100, Arjan van de Ven wrote:
> On Mon, 2006-03-20 at 13:12 +0100, Adrian Bunk wrote:
> > On Mon, Mar 20, 2006 at 01:05:22PM +0100, Arjan van de Ven wrote:
> > > On Mon, 2006-03-20 at 13:02 +0100, Adrian Bunk wrote:
> > > > As proposed some time ago [1], I'll continue the 2.6.16.x series after 
> > > > 2.6.17 will be released.
> > > 
> > > 
> > > ehh are you doing this as part of the regular stable effort ? Or in
> > > parallel to that?
> > 
> > This seems to be the point I never manage to communicate correctly...
> > 
> > After 2.6.17 will be released, there will be the last regular 2.6.16.x 
> > kernel by Greg and Chris.
> 
> more like after 2.6.18, since they do 2 releases back nowadays

Unless I've misunderstood it, this isn't completely true.

They would do more releases if there are patches sent for them, but in 
practice there is only one release back really done.

> > I'll continue the 2.6.16.x series _after_ this last regular stable 
> > kernel.
> 
> ok
> 
> btw I don't really agree with your criteria, I would strongly suggest
> that you keep using the "stable" criteria.

Simple patches adding support for aditional hardware might be nice.
For stuff in a flux like SATA updates might be nice.

Time will tell.

cu
Adrian

-- 

       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed

Re: 2.6.16.x will be a long-living kernel series

[Jan Engelhardt]

>> > As proposed some time ago [1], I'll continue the 2.6.16.x series after 
>> > 2.6.17 will be released.
>> 
>> ehh are you doing this as part of the regular stable effort ? Or in
>> parallel to that?
>
>This seems to be the point I never manage to communicate correctly...
>
>After 2.6.17 will be released, there will be the last regular 2.6.16.x 
>kernel by Greg and Chris.
>
>I'll continue the 2.6.16.x series _after_ this last regular stable 
>kernel.
>

No one's gonna stop you.
Let's see how it turns out -- it will surely be worth the experience ;-)


Jan Engelhardt
-- 

Re: Linux v2.6.16

[Joe Korty]

Git patch 52dfa9a64cfb3dd01fa1ee1150d589481e54e28e

	[PATCH] move rtc_interrupt() prototype to rtc.h

broke strace(1) builds.  The below moves the kernel-only additions lower,
under the already provided #ifdef __KERNEL__ statement.


 2.6.16-jak/include/linux/rtc.h |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff -puNa include/linux/rtc.h~patch include/linux/rtc.h
--- 2.6.16/include/linux/rtc.h~patch	2006-03-20 12:07:07.000000000 -0500
+++ 2.6.16-jak/include/linux/rtc.h	2006-03-20 12:07:07.000000000 -0500
@@ -11,8 +11,6 @@
 #ifndef _LINUX_RTC_H_
 #define _LINUX_RTC_H_
 
-#include <linux/interrupt.h>
-
 /*
  * The struct used to pass data via the following ioctl. Similar to the
  * struct tm in <time.h>, but it needs to be here so that the kernel 
@@ -95,6 +93,8 @@ struct rtc_pll_info {
 
 #ifdef __KERNEL__
 
+#include <linux/interrupt.h>
+
 typedef struct rtc_task {
 	void (*func)(void *private_data);
 	void *private_data;

_

Re: Linux v2.6.16

[Jeff Garzik]

Joe Korty wrote:
> Git patch 52dfa9a64cfb3dd01fa1ee1150d589481e54e28e
> 
> 	[PATCH] move rtc_interrupt() prototype to rtc.h
> 
> broke strace(1) builds.  The below moves the kernel-only additions lower,
> under the already provided #ifdef __KERNEL__ statement.
> 
> 
>  2.6.16-jak/include/linux/rtc.h |    4 ++--
>  1 files changed, 2 insertions(+), 2 deletions(-)

strace should be using sanitized versions of the kernel headers, not 
directly including them verbatim...

	Jeff

Re: Linux v2.6.16

[Jan Engelhardt]

>
> strace should be using sanitized versions of the kernel headers, not directly
> including them verbatim...
>
Now, would not it be good for everyone if the in-kernel headers get
every bit of sanitation? Especially those who are stuck with outdated 
versions of sanitized headers (thinking of FC3 and FC4) often do the
magic symlinking (/usr/include/linux -> /usr/src/linux/include/linux).


Jan Engelhardt
-- 

Re: Linux v2.6.16

[Joe Korty]

On Mon, Mar 20, 2006 at 08:25:21PM +0100, Jan Engelhardt wrote:
> >
> > strace should be using sanitized versions of the kernel headers, not directly
> > including them verbatim...
> >
> Now, would not it be good for everyone if the in-kernel headers get
> every bit of sanitation? Especially those who are stuck with outdated 
> versions of sanitized headers (thinking of FC3 and FC4) often do the
> magic symlinking (/usr/include/linux -> /usr/src/linux/include/linux).

Also, if the policy is that only kernel code can reference the kernel
headers, this intent should be more strongly enforced by removing all
occurances of #ifdef __KERNEL__ in said headers.

Joe

Re: Linux v2.6.16

[Linus Torvalds]

On Mon, 20 Mar 2006, Jan Engelhardt wrote:
> >
> > strace should be using sanitized versions of the kernel headers, not directly
> > including them verbatim...
> >
> Now, would not it be good for everyone if the in-kernel headers get
> every bit of sanitation?

Yes, we should strive for fairly sanitized headers. That said, Jeff is 
also right - people really generally shouldn't use the kernel headers 
directly.

So the rigt answer is to do both: make sure that people don't use kernel 
headers, but also try to keep them reasonably clean.

		Linus

Re: Linux v2.6.16

[Andreas Schwab]

Linus Torvalds <torvalds@osdl.org> writes:

> So the rigt answer is to do both: make sure that people don't use kernel 
> headers, but also try to keep them reasonably clean.

strace is kind of special, since it needs to operate very close to the
kernel (interpreting syscall arguments below all libc wrappers).

Andreas.

-- 
Andreas Schwab, SuSE Labs, schwab@suse.de
SuSE Linux Products GmbH, Maxfeldstraße 5, 90409 Nürnberg, Germany
PGP key fingerprint = 58CA 54C7 6D53 942B 1756  01D3 44D5 214B 8276 4ED5
"And now for something completely different."

Re: Linux v2.6.16

[Matthias Andree]

On Mon, 20 Mar 2006, Linus Torvalds wrote:

> 
> 
> On Mon, 20 Mar 2006, Jan Engelhardt wrote:
> > >
> > > strace should be using sanitized versions of the kernel headers, not directly
> > > including them verbatim...
> > >
> > Now, would not it be good for everyone if the in-kernel headers get
> > every bit of sanitation?
> 
> Yes, we should strive for fairly sanitized headers. That said, Jeff is 
> also right - people really generally shouldn't use the kernel headers 
> directly.

It appears this message hasn't spread wide enough yet. When reporting an
inotify-related build failure, I heard back from the GNOMES I shouldn't
be using outdated glibc headers but kernel headers instead... apparently
there's more need for discussion.

(Not that I'd find gamin particularly sensible, since it's undocumented,
and attracted WAY too much attention because of its flaws like SIGSEGV
in applications, 100% CPU loops and other shortcomings not only in Linux
environments, but also on FreeBSD.)

-- 
Matthias Andree

Re: Linux v2.6.16

[Peter Williams]

Linus Torvalds wrote:
> Ok, it's being mirrored out right now, the git tree should already be all 
> there, the tar-file and patches are still uploading.
> 
> Not a lot of changes since -rc6, but there's various random one-liners 
> here and there (a number of Coverity bugs found, for example), and there 
> are small MIPS and PowerPC updates.
> 
> Appended is the shortlog from 2.6.16-rc6, the full log (from 2.6.15) is on 
> the web/ftp-sites. 
> 
> It looks like both Fedora and SuSE end up using a kernel that is pretty 
> close to this 2.6.16 release, so let's all hope it's good. Give it a good 
> testing, please,

I've just noticed some strange error messages that were printed during 
boot but don't seem to have any adverse effects when running.

Mar 22 16:10:31 heathwren kernel: ACPI: PM-Timer IO Port: 0x1008
Mar 22 16:10:31 heathwren kernel: ACPI: LAPIC (acpi_id[0x00] 
lapic_id[0x00] enabled)
Mar 22 16:10:31 heathwren kernel: Processor #0 15:3 APIC version 20

### First CPU seen.

Mar 22 16:10:31 heathwren kernel: ACPI: LAPIC (acpi_id[0x01] 
lapic_id[0x01] enabled)
Mar 22 16:10:31 heathwren kernel: Processor #1 15:3 APIC version 20

### Second CPU seen.

Mar 22 16:10:31 heathwren kernel: ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl 
lint[0x1])
Mar 22 16:10:31 heathwren kernel: ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl 
lint[0x1])
Mar 22 16:10:31 heathwren kernel: ACPI: IOAPIC (id[0x02] 
address[0xfec00000] gsi_base[0])
Mar 22 16:10:31 heathwren kernel: IOAPIC[0]: apic_id 2, version 20, 
address 0xfec00000, GSI 0-23
Mar 22 16:10:31 heathwren kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 
global_irq 2 dfl dfl)
Mar 22 16:10:31 heathwren kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 
global_irq 9 dfl dfl)
Mar 22 16:10:31 heathwren kernel: Enabling APIC mode:  Flat.  Using 1 
I/O APICs
Mar 22 16:10:31 heathwren kernel: More than 8 CPUs detected and 
CONFIG_X86_PC cannot handle it.

### No more CPUs seen but something in there thinks there's more than 8 
of them.

Mar 22 16:10:31 heathwren kernel: Use CONFIG_X86_GENERICARCH or 
CONFIG_X86_BIGSMP.
Mar 22 16:10:31 heathwren kernel: Using ACPI (MADT) for SMP 
configuration information

Peter
-- 
Peter Williams                                   pwil3058@bigpond.net.au

"Learning, n. The kind of ignorance distinguishing the studious."
  -- Ambrose Bierce

Re: Linux v2.6.16

[Ashok Raj]

On Tue, Mar 21, 2006 at 09:22:41PM -0800, Peter Williams wrote:
> 
>    I/O APICs
>    Mar 22 16:10:31 heathwren kernel: More than 8 CPUs detected and
>    CONFIG_X86_PC cannot handle it.
> 
>    ###  No more CPUs seen but something in there thinks there's more than
>    8
>    of them.
> 
>    Mar 22 16:10:31 heathwren kernel: Use CONFIG_X86_GENERICARCH or
>    CONFIG_X86_BIGSMP.
> 


This was disussed here,  

http://marc.theaimsgroup.com/?l=linux-kernel&m=114228068804099&w=2

but we didnt yet close out on it, Andrew didnt feel comfortable
making CONFIG_HOTPLUG_CPU depend on !X86_PC, and making it depend on CONFIG_GENERICARCH
or CONFIG_BIGSMP this late in the process.

The warning is bogus, when BIGSMP was first introduced it was solely to handle >8 CPUS
using custer mode configuration. We switched bigsmp to use flat physical mode just like 
what we do for x86_64, because some chipsets have ill effects with cpu hotplug.
when we wakeup a new cpu. Details here

http://marc.theaimsgroup.com/?l=linux-kernel&m=113261865814107&w=2

Hence we switched to bigsmp, but the error message was not reworked, better yet is
to have the right config depends so we dont run into any race and instability issues.


-- 
Cheers,
Ashok Raj
- Open Source Technology Center

Re: Linux v2.6.16

[Ashok Raj]

On Tue, Mar 21, 2006 at 10:31:20PM -0800, Ashok Raj wrote:
> On Tue, Mar 21, 2006 at 09:22:41PM -0800, Peter Williams wrote:
> > 
> >    I/O APICs
> >    Mar 22 16:10:31 heathwren kernel: More than 8 CPUs detected and
> >    CONFIG_X86_PC cannot handle it.
> > 
> >    ###  No more CPUs seen but something in there thinks there's more than
> >    8
> >    of them.
> > 
> >    Mar 22 16:10:31 heathwren kernel: Use CONFIG_X86_GENERICARCH or
> >    CONFIG_X86_BIGSMP.
> > 
> 
> 

Hi Andrew

Please consider for inclusion... resending with changelog per Andrew.


-- 
Cheers,
Ashok Raj
- Open Source Technology Center


This patch makes CONFIG_HOTPLUG_CPU depend on !X86_PC, so we need to turn on 
either CONFIG_GENERICARCH, CONFIG_BIGSMP or any other subarch except X86_PC when
CONFIG_HOTPLUG_CPU=y

With 2.6.15+ kernels when CONFIG_HOTPLUG_CPU is turned on we switch to bigsmp mode for
sending IPI's and ioapic configurations that caused the following error message.

>> More than 8 CPUs detected and CONFIG_X86_PC cannot handle it.
>> Use CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.

Originally bigsmp was added just to handle >8 cpus, but now with hotplug cpu support
we need to use bigsmp mode (why? see below), that cause the above error message even 
if there were less than 8 cpus in the system.

The message is bogus, but we are cannot use logical flat mode due to issues with
broadcast IPI can confuse a CPU just comming up. We use flat physical mode just like x86_64
case. More details on why bigsmp now uses flat physical mode (vs. cluster mode)
in following link.

http://marc.theaimsgroup.com/?l=linux-kernel&m=113261865814107&w=2


Signed-off-by: Ashok Raj <ashok.raj@intel.com>
---------------------------------------------------------

 arch/i386/Kconfig |    2 +-
 1 files changed, 1 insertion(+), 1 deletion(-)

Index: linux-2.6.16-rc6-mm1/arch/i386/Kconfig
===================================================================
--- linux-2.6.16-rc6-mm1.orig/arch/i386/Kconfig
+++ linux-2.6.16-rc6-mm1/arch/i386/Kconfig
@@ -760,7 +760,7 @@ config PHYSICAL_START
 
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
-	depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER
+	depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER && !X86_PC
 	---help---
 	  Say Y here to experiment with turning CPUs off and on.  CPUs
 	  can be controlled through /sys/devices/system/cpu.

Re: Linux v2.6.16

[Michal Piotrowski]

Hi,

On 22/03/06, Ashok Raj <ashok.raj@intel.com> wrote:
> On Tue, Mar 21, 2006 at 10:31:20PM -0800, Ashok Raj wrote:
> > On Tue, Mar 21, 2006 at 09:22:41PM -0800, Peter Williams wrote:
> > >
> > >    I/O APICs
> > >    Mar 22 16:10:31 heathwren kernel: More than 8 CPUs detected and
> > >    CONFIG_X86_PC cannot handle it.
> > >
> > >    ###  No more CPUs seen but something in there thinks there's more than
> > >    8
> > >    of them.
> > >
> > >    Mar 22 16:10:31 heathwren kernel: Use CONFIG_X86_GENERICARCH or
> > >    CONFIG_X86_BIGSMP.
> > >
> >
> >
>
> Hi Andrew
>
> Please consider for inclusion... resending with changelog per Andrew.
>

SOFTWARE_SUSPEND depends on HOTPLUG_CPU.

It maybe useful for modern laptops, dual core desktops etc.

Regards,
Michal

--
Michal K. K. Piotrowski
LTG - Linux Testers Group
(http://www.stardust.webpages.pl/ltg/wiki/)

Re: Linux v2.6.16

[Rafael J. Wysocki]

On Wednesday 22 March 2006 14:08, Ashok Raj wrote:
> On Tue, Mar 21, 2006 at 10:31:20PM -0800, Ashok Raj wrote:
> > On Tue, Mar 21, 2006 at 09:22:41PM -0800, Peter Williams wrote:
> > > 
> > >    I/O APICs
> > >    Mar 22 16:10:31 heathwren kernel: More than 8 CPUs detected and
> > >    CONFIG_X86_PC cannot handle it.
> > > 
> > >    ###  No more CPUs seen but something in there thinks there's more than
> > >    8
> > >    of them.
> > > 
> > >    Mar 22 16:10:31 heathwren kernel: Use CONFIG_X86_GENERICARCH or
> > >    CONFIG_X86_BIGSMP.
> > > 
> > 
> > 
> 
> Hi Andrew
> 
> Please consider for inclusion... resending with changelog per Andrew.

Please don't apply this patch.

CPU hotplug is used by swsusp for disabling the nonboot CPUs.  Software
suspend won't work on SMP without CPU hotplugging.

Greetings,
Rafael

Re: Linux v2.6.16

[Ashok Raj]

On Wed, Mar 22, 2006 at 06:39:41PM +0100, Rafael J. Wysocki wrote:
> > 
> > Please consider for inclusion... resending with changelog per Andrew.
> 
> Please don't apply this patch.
> 
> CPU hotplug is used by swsusp for disabling the nonboot CPUs.  Software
> suspend won't work on SMP without CPU hotplugging.
> 

Hi Rafael,

what part of this is not suitable for swsusp? All we do is just use flat physical mode
for IPI processing. The only difference is moving from logical flat mode to using
flat physical mode.

Have you tested swsusp with CONFIG_GENERICARCH and CONFIG_HOTPLUG_CPU=y ?

It might help to explain why this would break your swsusp with SMP work?

-- 
Cheers,
Ashok Raj
- Open Source Technology Center

Re: Linux v2.6.16

[Rafael J. Wysocki]

Hi,

On Wednesday 22 March 2006 18:54, Ashok Raj wrote:
> On Wed, Mar 22, 2006 at 06:39:41PM +0100, Rafael J. Wysocki wrote:
> > > 
> > > Please consider for inclusion... resending with changelog per Andrew.
> > 
> > Please don't apply this patch.
> > 
> > CPU hotplug is used by swsusp for disabling the nonboot CPUs.  Software
> > suspend won't work on SMP without CPU hotplugging.
> > 
> 
> Hi Rafael,
> 
> what part of this is not suitable for swsusp? All we do is just use flat physical mode
> for IPI processing. The only difference is moving from logical flat mode to using
> flat physical mode.
> 
> Have you tested swsusp with CONFIG_GENERICARCH and CONFIG_HOTPLUG_CPU=y ?
> 
> It might help to explain why this would break your swsusp with SMP work?

On SMP systems swsusp (suspend in general, AFAICT) uses the disable_nonboot_cpus()
function defined in kernel/power/smp.c, which calls cpu_down() that is only
defined if CONFIG_HOTPLUG_CPU is set.  We can't suspend and resume SMP systems
reliably without it.

Greetings,
Rafael

Re: Linux v2.6.16

[Ashok Raj]

On Wed, Mar 22, 2006 at 07:11:05PM +0100, Rafael J. Wysocki wrote:
> > It might help to explain why this would break your swsusp with SMP work?
> 
> On SMP systems swsusp (suspend in general, AFAICT) uses the disable_nonboot_cpus()
> function defined in kernel/power/smp.c, which calls cpu_down() that is only
> defined if CONFIG_HOTPLUG_CPU is set.  We can't suspend and resume SMP systems
> reliably without it.
> 
I understand the needs of swsusp, but no one took away CONFIG_HOTPLUG_CPU away... 
just that you need to also enable CONFIG_GENERICARCH to get it to work reliably, and
not see that printk... nothing else..

Iam still confused why you think swsusp wont work...

with that patch, try

CONFIG_X86_PC=n
CONFIG_GENERICARCH=y
CONFIG_HOTPLUG_CPU=y
...

<whatever swssusp needs>=y

and see if thinks work out for you?

-- 
Cheers,
Ashok Raj
- Open Source Technology Center

Re: Linux v2.6.16

[Rafael J. Wysocki]

On Wednesday 22 March 2006 19:27, Ashok Raj wrote:
> On Wed, Mar 22, 2006 at 07:11:05PM +0100, Rafael J. Wysocki wrote:
> > > It might help to explain why this would break your swsusp with SMP work?
> > 
> > On SMP systems swsusp (suspend in general, AFAICT) uses the disable_nonboot_cpus()
> > function defined in kernel/power/smp.c, which calls cpu_down() that is only
> > defined if CONFIG_HOTPLUG_CPU is set.  We can't suspend and resume SMP systems
> > reliably without it.
> > 
> I understand the needs of swsusp, but no one took away CONFIG_HOTPLUG_CPU away... 
> just that you need to also enable CONFIG_GENERICARCH to get it to work reliably, and
> not see that printk... nothing else..
> 
> Iam still confused why you think swsusp wont work...
> 
> with that patch, try
> 
> CONFIG_X86_PC=n
> CONFIG_GENERICARCH=y
> CONFIG_HOTPLUG_CPU=y

Well, there's nothing like CONFIG_GENERICARCH on x86_64 or I'm obviously
missing something. :-)

On x86_64 I can choose between X86_PC and X86_VSMP and I'm not sure I'd like
to set X86_VSMP just in order to be able to suspend a box with a dual-core CPU.
IMHO that would be over the top.

Greetings,
Rafael

Re: Linux v2.6.16

[Ashok Raj]

On Wed, Mar 22, 2006 at 09:40:00PM +0100, Rafael J. Wysocki wrote:
> > 
> > with that patch, try
> > 
> > CONFIG_X86_PC=n
> > CONFIG_GENERICARCH=y
> > CONFIG_HOTPLUG_CPU=y
> 
> Well, there's nothing like CONFIG_GENERICARCH on x86_64 or I'm obviously
> missing something. :-)
> 
> On x86_64 I can choose between X86_PC and X86_VSMP and I'm not sure I'd like
> to set X86_VSMP just in order to be able to suspend a box with a dual-core CPU.
> IMHO that would be over the top.
> 

This change is only for i386.. check the patch, its introduced only for arch/i386/Kconfig

There is no change to x86_64, we anyway choose physflat mode in x86_64 which is exactly 
same as bigsmp in i386.

We didnt change anything in x86_64...Why this speculation :(

Iam attaching that patch for your reference here... in case you lost it and looking at 
some other patch. :-)

Could you _please_ really check this and tell me if there is real concern... its pretty
simple patch... no other arch is affected...


This patch makes CONFIG_HOTPLUG_CPU depend on !X86_PC, so we need to turn on 
either CONFIG_GENERICARCH, CONFIG_BIGSMP or any other subarch except X86_PC

With 2.6.15+ kernels when CONFIG_HOTPLUG_CPU is turned on we switch to bigsmp mode for
sending IPI's and ioapic configurations that caused the following error message.

>> More than 8 CPUs detected and CONFIG_X86_PC cannot handle it.
>> Use CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.

Originally bigsmp was added just to handle >8 cpus, but now with hotplug cpu support
we need to use bigsmp mode (why? see below), that cause the above error message even 
if there were less than 8 cpus in the system.

The message is bogus, but we are cannot use logical flat mode due to issues with
broadcast IPI can confuse a CPU just comming up. We use flat physical mode just like x86_64
case. More details on why bigsmp now uses flat physical mode (vs. cluster mode)
in following link.

http://marc.theaimsgroup.com/?l=linux-kernel&m=113261865814107&w=2


Signed-off-by: Ashok Raj <ashok.raj@intel.com>
---------------------------------------------------------

 arch/i386/Kconfig |    2 +-
 1 files changed, 1 insertion(+), 1 deletion(-)

Index: linux-2.6.16-rc6-mm1/arch/i386/Kconfig
===================================================================
--- linux-2.6.16-rc6-mm1.orig/arch/i386/Kconfig
+++ linux-2.6.16-rc6-mm1/arch/i386/Kconfig
@@ -760,7 +760,7 @@ config PHYSICAL_START
 
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
-	depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER
+	depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER && !X86_PC
 	---help---
 	  Say Y here to experiment with turning CPUs off and on.  CPUs
 	  can be controlled through /sys/devices/system/cpu.

Re: Linux v2.6.16

[Rafael J. Wysocki]

On Wednesday 22 March 2006 22:00, Ashok Raj wrote:
> On Wed, Mar 22, 2006 at 09:40:00PM +0100, Rafael J. Wysocki wrote:
> > > 
> > > with that patch, try
> > > 
> > > CONFIG_X86_PC=n
> > > CONFIG_GENERICARCH=y
> > > CONFIG_HOTPLUG_CPU=y
> > 
> > Well, there's nothing like CONFIG_GENERICARCH on x86_64 or I'm obviously
> > missing something. :-)
> > 
> > On x86_64 I can choose between X86_PC and X86_VSMP and I'm not sure I'd like
> > to set X86_VSMP just in order to be able to suspend a box with a dual-core CPU.
> > IMHO that would be over the top.
> > 
> 
> This change is only for i386.. check the patch, its introduced only for arch/i386/Kconfig

Of course you're right, sorry.

> There is no change to x86_64, we anyway choose physflat mode in x86_64 which is exactly 
> same as bigsmp in i386.
> 
> We didnt change anything in x86_64...Why this speculation :(
> 
> Iam attaching that patch for your reference here... in case you lost it and looking at 
> some other patch. :-)
> 
> Could you _please_ really check this and tell me if there is real concern... 

No, there's not.  [Except I think we'll need to document that CONFIG_GENERICARCH
is needed for suspend on i386 SMP machines.]

> its pretty simple patch... no other arch is affected...

OK

Rafael

Re: Linux v2.6.16

[Peter Williams]

Ashok Raj wrote:
> On Tue, Mar 21, 2006 at 09:22:41PM -0800, Peter Williams wrote:
> 
>>   I/O APICs
>>   Mar 22 16:10:31 heathwren kernel: More than 8 CPUs detected and
>>   CONFIG_X86_PC cannot handle it.
>>
>>   ###  No more CPUs seen but something in there thinks there's more than
>>   8
>>   of them.
>>
>>   Mar 22 16:10:31 heathwren kernel: Use CONFIG_X86_GENERICARCH or
>>   CONFIG_X86_BIGSMP.
>>
> 
> 
> 
> This was disussed here,  
> 
> http://marc.theaimsgroup.com/?l=linux-kernel&m=114228068804099&w=2
> 
> but we didnt yet close out on it, Andrew didnt feel comfortable
> making CONFIG_HOTPLUG_CPU depend on !X86_PC, and making it depend on CONFIG_GENERICARCH
> or CONFIG_BIGSMP this late in the process.
> 
> The warning is bogus,

That's what I thought but I thought I should still report it as bogus 
messages can cause people to become inured and ignore real ones.

> when BIGSMP was first introduced it was solely to handle >8 CPUS
> using custer mode configuration. We switched bigsmp to use flat physical mode just like 
> what we do for x86_64, because some chipsets have ill effects with cpu hotplug.
> when we wakeup a new cpu. Details here
> 
> http://marc.theaimsgroup.com/?l=linux-kernel&m=113261865814107&w=2
> 
> Hence we switched to bigsmp, but the error message was not reworked, better yet is
> to have the right config depends so we dont run into any race and instability issues.
> 
> 

Peter
-- 
Peter Williams                                   pwil3058@bigpond.net.au

"Learning, n. The kind of ignorance distinguishing the studious."
  -- Ambrose Bierce

Re: Linux v2.6.16(.1) - compile failure

[Athanasius]

[-- Attachment #1: Type: text/plain, Size: 50444 bytes --]

  I thought I'd give 2.6.16 a go, and whilst I was at it also add in the
2.6.16.1 patch.  Unfortunately after:

1) untar
2) copy in 2.6.15 working config
3) make oldconfig
4) nice make -l5 -j5 bzImage && nice make -j5 -l5 modules

I have the following errors:

...
  LD      net/ipv4/netfilter/built-in.o
  CC      net/ipv4/xfrm4_output.o
  CC      net/ipv4/xfrm4_input.o
  LD      net/ipv4/built-in.o
  LD      net/built-in.o
  GEN     .version
  CHK     include/linux/compile.h
  UPD     include/linux/compile.h
  CC      init/version.o
  LD      init/built-in.o
  LD      .tmp_vmlinux1
net/built-in.o(.text+0x7c990): In function `ctnetlink_parse_nat_proto':
: undefined reference to `ip_nat_proto_find_get'
net/built-in.o(.text+0x7c9b2): In function `ctnetlink_parse_nat_proto':
: undefined reference to `ip_nat_proto_put'
net/built-in.o(.text+0x7d695): In function `ctnetlink_change_conntrack':
: undefined reference to `ip_nat_setup_info'
net/built-in.o(.text+0x7da9f): In function `ctnetlink_create_conntrack':
: undefined reference to `ip_nat_setup_info'
make: *** [.tmp_vmlinux1] Error 1

A quick check shows no mention of ip_nat_proto_find_get in the 2.6.16.1
diff so I assume this is a problem with vanilla 2.6.16.

Config:

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.16.1
# Tue Mar 28 17:21:40 2006
#
CONFIG_X86_32=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_UID16=y
CONFIG_VM86=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y

#
# Block layer
#
# CONFIG_LBD is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
CONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
# CONFIG_SMP is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y

#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_DELL_RBU is not set
CONFIG_DCDBAS=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
# CONFIG_REGPARM is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x100000
CONFIG_DOUBLEFAULT=y

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SOFTWARE_SUSPEND is not set

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
# CONFIG_ACPI_SLEEP is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_VIDEO is not set
# CONFIG_ACPI_HOTKEY is not set
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set
# CONFIG_ACPI_CONTAINER is not set

#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m

#
# CPUFreq processor drivers
#
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_POWERNOW_K8_ACPI=y
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set

#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY_PROC is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_NET_KEY=m
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
CONFIG_INET6_TUNNEL=y
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=y
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CONNTRACK_MARK=y
CONFIG_IP_NF_CONNTRACK_EVENTS=y
CONFIG_IP_NF_CONNTRACK_NETLINK=y
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_NETBIOS_NS=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_PPTP=m
CONFIG_IP_NF_QUEUE=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_IPRANGE=y
CONFIG_IP_NF_MATCH_MULTIPORT=y
CONFIG_IP_NF_MATCH_TOS=y
CONFIG_IP_NF_MATCH_RECENT=y
CONFIG_IP_NF_MATCH_ECN=y
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_MATCH_POLICY=m
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_NAT_PPTP=m
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_TOS=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=y
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_RT=y
CONFIG_IP6_NF_MATCH_OPTS=y
CONFIG_IP6_NF_MATCH_FRAG=y
CONFIG_IP6_NF_MATCH_HL=y
CONFIG_IP6_NF_MATCH_MULTIPORT=y
CONFIG_IP6_NF_MATCH_OWNER=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_MATCH_AHESP=y
CONFIG_IP6_NF_MATCH_EUI64=y
CONFIG_IP6_NF_MATCH_POLICY=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_LOG=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_MANGLE=y
CONFIG_IP6_NF_TARGET_HL=y
CONFIG_IP6_NF_RAW=y

#
# DCCP Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m

#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID3=m
CONFIG_IP_DCCP_TFRC_LIB=m

#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_IP_DCCP_UNLOAD_HACK is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
CONFIG_SCTP_HMAC_SHA1=y
# CONFIG_SCTP_HMAC_MD5 is not set

#
# TIPC Configuration (EXPERIMENTAL)
#
CONFIG_TIPC=m
CONFIG_TIPC_ADVANCED=y
CONFIG_TIPC_ZONES=3
CONFIG_TIPC_CLUSTERS=1
CONFIG_TIPC_NODES=255
CONFIG_TIPC_SLAVE_NODES=0
CONFIG_TIPC_PORTS=8191
CONFIG_TIPC_LOG=0
# CONFIG_TIPC_DEBUG is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
CONFIG_LLC2=m
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
CONFIG_NET_SCH_HTB=y
CONFIG_NET_SCH_HFSC=y
CONFIG_NET_SCH_PRIO=y
CONFIG_NET_SCH_RED=y
CONFIG_NET_SCH_SFQ=y
CONFIG_NET_SCH_TEQL=y
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=y

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=y
CONFIG_NET_CLS_RSVP6=y
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_ESTIMATOR=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set

#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=m

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_1284 is not set

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_ISAPNP=y
# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_IDEDMA_ONLYDISK=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y

#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_SATA=m
# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_SATA_QSTOR is not set
CONFIG_SCSI_SATA_PROMISE=m
CONFIG_SCSI_SATA_SX4=m
# CONFIG_SCSI_SATA_SIL is not set
# CONFIG_SCSI_SATA_SIL24 is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
CONFIG_SCSI_SATA_VIA=m
# CONFIG_SCSI_SATA_VITESSE is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_IEEE1394_OUI_DB=y
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
# CONFIG_IEEE1394_EXPORT_FULL_API is not set

#
# Device Drivers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=m

#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_NET_SB1000 is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# PHY device support
#
CONFIG_PHYLIB=m

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
CONFIG_SK98LIN=m
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=m
CONFIG_NETPOLL=y
CONFIG_NETPOLL_RX=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
CONFIG_JOYSTICK_JOYDUMP=m
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_WISTRON_BTNS is not set
CONFIG_INPUT_UINPUT=m

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=m
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set

#
# IPMI
#
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m

#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_I8XX_TCO is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set

#
# ISA-based Watchdog Cards
#
# CONFIG_PCWATCHDOG is not set
# CONFIG_MIXCOMWD is not set
# CONFIG_WDT is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=y
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_MWAVE is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
CONFIG_HANGCHECK_TIMER=m

#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set

#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_ISA=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# SPI support
#
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=m
CONFIG_SPI_BUTTERFLY=m

#
# SPI Protocol Masters
#

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Hardware Monitoring support
#
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_LM63 is not set
CONFIG_SENSORS_LM75=m
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
CONFIG_SENSORS_VIA686A=m
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
CONFIG_SENSORS_W83627HF=m
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia Capabilities Port drivers
#

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m

#
# Video For Linux
#

#
# Video Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
CONFIG_VIDEO_CQCAM=m
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
# CONFIG_VIDEO_AUDIO_DECODER is not set
# CONFIG_VIDEO_DECODER is not set

#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_SF16FMR2 is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
# CONFIG_FB is not set
CONFIG_VIDEO_SELECT=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_AC97_BUS=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m

#
# ISA devices
#
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
# CONFIG_SND_WAVEFRONT is not set

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set

#
# Open Sound System
#
CONFIG_SOUND_PRIME=m
# CONFIG_OBSOLETE_OSS_DRIVER is not set
# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_ICH is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
CONFIG_SOUND_OSS=m
CONFIG_SOUND_TRACEINIT=y
# CONFIG_SOUND_DMAP is not set
# CONFIG_SOUND_AD1816 is not set
# CONFIG_SOUND_AD1889 is not set
# CONFIG_SOUND_ADLIB is not set
# CONFIG_SOUND_ACI_MIXER is not set
# CONFIG_SOUND_VMIDI is not set
# CONFIG_SOUND_TRIX is not set
# CONFIG_SOUND_MSS is not set
CONFIG_SOUND_MPU401=m
# CONFIG_SOUND_PAS is not set
# CONFIG_SOUND_PSS is not set
# CONFIG_SOUND_SB is not set
# CONFIG_SOUND_OPL3SA2 is not set
# CONFIG_SOUND_UART6850 is not set
# CONFIG_SOUND_AEDSP16 is not set
# CONFIG_SOUND_TVMIXER is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
CONFIG_HID_FF=y
# CONFIG_HID_PID is not set
# CONFIG_LOGITECH_FF is not set
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_PWC is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ANYDATA is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set

#
# USB DSL modem support
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
# CONFIG_EDAC is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_MINIX_FS=m
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
CONFIG_CONFIGFS_FS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_EXPERIMENTAL=y
# CONFIG_CIFS_UPCALL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp850"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set

#
# Kernel hacking
#
CONFIG_PRINTK_TIME=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_4KSTACKS is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m

#
# Hardware crypto devices
#
CONFIG_CRYPTO_DEV_PADLOCK=y
CONFIG_CRYPTO_DEV_PADLOCK_AES=y

#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC32=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_KTIME_SCALAR=y
-- 
- Athanasius = Athanasius(at)miggy.org / http://www.miggy.org/
                  Finger athan(at)fysh.org for PGP key
	   "And it's me who is my enemy. Me who beats me up.
Me who makes the monsters. Me who strips my confidence." Paula Cole - ME

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

'make oldconfig' sub-optimal 2.6.15 -> 2.6.16(.1) (was Re: Linux v2.6.16(.1) - compile failure)

[Athanasius]

[-- Attachment #1: Type: text/plain, Size: 1685 bytes --]

On Tue, Mar 28, 2006 at 05:39:32PM +0100, Athanasius wrote:
>   CC      init/version.o
>   LD      init/built-in.o
>   LD      .tmp_vmlinux1
> net/built-in.o(.text+0x7c990): In function `ctnetlink_parse_nat_proto':
> : undefined reference to `ip_nat_proto_find_get'
> net/built-in.o(.text+0x7c9b2): In function `ctnetlink_parse_nat_proto':
> : undefined reference to `ip_nat_proto_put'
> net/built-in.o(.text+0x7d695): In function `ctnetlink_change_conntrack':
> : undefined reference to `ip_nat_setup_info'
> net/built-in.o(.text+0x7da9f): In function `ctnetlink_create_conntrack':
> : undefined reference to `ip_nat_setup_info'
> make: *** [.tmp_vmlinux1] Error 1
...
> CONFIG_IP_NF_TARGET_TCPMSS=m
> CONFIG_IP_NF_NAT=m
> CONFIG_IP_NF_NAT_NEEDED=y
> CONFIG_IP_NF_TARGET_MASQUERADE=m

...

  It looks like the problem was that "CONFIG_IP_NF_NAT=m".  I changed
this to 'y' and things look to be compiling fine now.

  I do now note that despite using 'make oldconfig' on my 2.6.15 .config
file I had to reselect a load of Netfilter options, and it would seem I
decided this time around to have 'm' instead of 'y' there (this is for
my desktop machine where I'll only really use NAT if experimenting
before making changes to the router/firewall machine).

  Basically it's a failure with 'make oldconfig' in some way, but if we
can select 'm' for CONFIG_IP_NF_NAT then surely it should work.

-Ath
-- 
- Athanasius = Athanasius(at)miggy.org / http://www.miggy.org/
                  Finger athan(at)fysh.org for PGP key
	   "And it's me who is my enemy. Me who beats me up.
Me who makes the monsters. Me who strips my confidence." Paula Cole - ME

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

netfilter: IP_NF_CONNTRACK_NETLINK=y, IP_NF_NAT=m compile error

[Adrian Bunk]

On Fri, Mar 31, 2006 at 06:09:16PM +0100, Athanasius wrote:
> On Tue, Mar 28, 2006 at 05:39:32PM +0100, Athanasius wrote:
> >   CC      init/version.o
> >   LD      init/built-in.o
> >   LD      .tmp_vmlinux1
> > net/built-in.o(.text+0x7c990): In function `ctnetlink_parse_nat_proto':
> > : undefined reference to `ip_nat_proto_find_get'
> > net/built-in.o(.text+0x7c9b2): In function `ctnetlink_parse_nat_proto':
> > : undefined reference to `ip_nat_proto_put'
> > net/built-in.o(.text+0x7d695): In function `ctnetlink_change_conntrack':
> > : undefined reference to `ip_nat_setup_info'
> > net/built-in.o(.text+0x7da9f): In function `ctnetlink_create_conntrack':
> > : undefined reference to `ip_nat_setup_info'
> > make: *** [.tmp_vmlinux1] Error 1
> ...
> > CONFIG_IP_NF_TARGET_TCPMSS=m
> > CONFIG_IP_NF_NAT=m
> > CONFIG_IP_NF_NAT_NEEDED=y
> > CONFIG_IP_NF_TARGET_MASQUERADE=m
> 
> ...
> 
>   It looks like the problem was that "CONFIG_IP_NF_NAT=m".  I changed
> this to 'y' and things look to be compiling fine now.
>...

First of all thanks for your report.

More exactly, it's the combination CONFIG_IP_NF_CONNTRACK_NETLINK=y, 
CONFIG_IP_NF_NAT=m.

Can someone who understands the netfilter dependencies please look into 
this bug?

It's present in both 2.6.16.1 and 2.6.16-mm2.
 
> -Ath

cu
Adrian

-- 

       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed

Re: Linux v2.6.16

[Bodo Eggert]

Ashok Raj <ashok.raj@intel.com> wrote:
> On Tue, Mar 21, 2006 at 10:31:20PM -0800, Ashok Raj wrote:
>> On Tue, Mar 21, 2006 at 09:22:41PM -0800, Peter Williams wrote:

>> >    I/O APICs
>> >    Mar 22 16:10:31 heathwren kernel: More than 8 CPUs detected and
>> >    CONFIG_X86_PC cannot handle it.
>> > 
>> >    ###  No more CPUs seen but something in there thinks there's more than
>> >    8
>> >    of them.
>> > 
>> >    Mar 22 16:10:31 heathwren kernel: Use CONFIG_X86_GENERICARCH or
>> >    CONFIG_X86_BIGSMP.

> Please consider for inclusion... resending with changelog per Andrew.

You should rather change the message, since AFAIR from the thread
HOTPLUG_CPU is required for suspending.

Something like:
"CONFIG_X86_PC (PC-compatible) can handle up to 8 CPUs. Reconfigure and
 recompile your kernel if you intend to use more CPUs."


BTW: The help text is confusing: If (CONFIG_X86_BIGSMP)
"This option is needed for the systems that have more than 8 CPUs
 and if the system is not of any sub-arch type above.",
no option allowing more than 8 CPUs should follow, but CONFIG_X86_GENERICARCH
does follow and it's suggested for that case. Maybe BIGSMP should be moved
down to the end, only CONFIG_X86_GENERICARCH being below with the help text
changed to "Supports all Subarchitectures above".

-- 
Ich danke GMX dafür, die Verwendung meiner Adressen mittels per SPF
verbreiteten Lügen zu sabotieren.