From: Jeff Garzik <jeff@garzik.org>
To: Ed Sweetman <safemode@comcast.net>
Cc: linux-kernel@vger.kernel.org
Subject: Re: libata ignores non-dma disks?
Date: Tue, 21 Mar 2006 22:56:04 -0500 [thread overview]
Message-ID: <4420CAD4.60700@garzik.org> (raw)
In-Reply-To: <4420B7D6.4020706@comcast.net>
Ed Sweetman wrote:
> I'm using 2.6.16-rc6-ide1 (alan's patchset) and using the sata_nv and
> pata_amd drivers. I have all UDMA drives except a CF disk -> IDE
> interface, which should be running in PIO mode4. Libata detects the
> device, but spits out a message about "no dma" and then says it's not
> supported and is ignoring it. Is this device not supported because
> it's not using dma or for some other reason?
> It's the only device on it's channel (secondary pata)
>
> ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xF008 irq 15
> ata6: dev 0 cfg 49:0e00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000
> 88:0000
> ata6: no dma
> ata6: dev 0 not supported, ignoring
> scsi5 : pata_amd
Delete the "no dma" check, and debug from there... PIO support is in
there, just needs a few final fixes.
Jeff
next prev parent reply other threads:[~2006-03-22 3:56 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-03-22 2:35 libata ignores non-dma disks? Ed Sweetman
2006-03-22 3:56 ` Jeff Garzik [this message]
2006-03-22 21:22 ` Ed Sweetman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4420CAD4.60700@garzik.org \
--to=jeff@garzik.org \
--cc=linux-kernel@vger.kernel.org \
--cc=safemode@comcast.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox