public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
To: Greg KH <greg@kroah.com>
Cc: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>,
	Andrew Morton <akpm@osdl.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	linux-pci@atrey.karlin.mff.cuni.cz
Subject: [PATCH 2.6.16-mm1 1/4] PCI legacy I/O port free driver (take 6) - Changes to generic PCI code
Date: Fri, 24 Mar 2006 14:31:16 +0900	[thread overview]
Message-ID: <44238424.3080500@jp.fujitsu.com> (raw)
In-Reply-To: <442382F1.2050300@jp.fujitsu.com>

This patch adds the following changes into generic PCI code especially
for PCI legacy free drivers.

    - Moved the following two things from pci_enable_device() into
      pci_enable_device_bars(). By this change, we can use
      pci_enable_device_bars() to enable only the specific regions.

          o Call pci_fixup_device() on the device
          o Set dev->is_enabled

    - Added new field 'bars_enabled' into struct pci_device to
      remember which BARs already enabled. This new field is
      initialized at pci_enable_device_bars() time and cleared
      at pci_disable_device() time.
 
    - Changed pci_request_regions()/pci_release_regions() to
      request/release only the regions which have already been
      enabled.

    - Added helper routine pci_select_bars() which makes proper mask
      of BARs from the specified resource type. This would be very
      helpful for users of pci_enable_device_bars().

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>

---
 drivers/pci/pci-driver.c |    3 ++-
 drivers/pci/pci.c        |   30 +++++++++++++++++++++++-------
 include/linux/pci.h      |   12 ++++++++++++
 3 files changed, 37 insertions(+), 8 deletions(-)

Index: linux-2.6.16-mm1/drivers/pci/pci-driver.c
===================================================================
--- linux-2.6.16-mm1.orig/drivers/pci/pci-driver.c	2006-03-23 20:04:06.000000000 +0900
+++ linux-2.6.16-mm1/drivers/pci/pci-driver.c	2006-03-23 20:04:11.000000000 +0900
@@ -293,7 +293,8 @@
 	pci_restore_state(pci_dev);
 	/* if the device was enabled before suspend, reenable */
 	if (pci_dev->is_enabled)
-		retval = pci_enable_device(pci_dev);
+		retval = pci_enable_device_bars(pci_dev,
+						pci_dev->bars_enabled);
 	/* if the device was busmaster before the suspend, make it busmaster again */
 	if (pci_dev->is_busmaster)
 		pci_set_master(pci_dev);
Index: linux-2.6.16-mm1/drivers/pci/pci.c
===================================================================
--- linux-2.6.16-mm1.orig/drivers/pci/pci.c	2006-03-23 20:04:06.000000000 +0900
+++ linux-2.6.16-mm1/drivers/pci/pci.c	2006-03-23 20:04:11.000000000 +0900
@@ -493,6 +493,9 @@
 	err = pcibios_enable_device(dev, bars);
 	if (err < 0)
 		return err;
+	pci_fixup_device(pci_fixup_enable, dev);
+	dev->is_enabled = 1;
+	dev->bars_enabled = bars;
 	return 0;
 }
 
@@ -510,8 +513,6 @@
 	int err = pci_enable_device_bars(dev, (1 << PCI_NUM_RESOURCES) - 1);
 	if (err)
 		return err;
-	pci_fixup_device(pci_fixup_enable, dev);
-	dev->is_enabled = 1;
 	return 0;
 }
 
@@ -546,6 +547,7 @@
 
 	pcibios_disable_device(dev);
 	dev->is_enabled = 0;
+	dev->bars_enabled = 0;
 }
 
 /**
@@ -628,6 +630,12 @@
 {
 	if (pci_resource_len(pdev, bar) == 0)
 		return;
+	if (!(pdev->bars_enabled & (1 << bar))) {
+		dev_warn(&pdev->dev,
+			 "Trying to release region #%d that is not enabled\n",
+			 bar + 1);
+		return;
+	}
 	if (pci_resource_flags(pdev, bar) & IORESOURCE_IO)
 		release_region(pci_resource_start(pdev, bar),
 				pci_resource_len(pdev, bar));
@@ -654,7 +662,12 @@
 {
 	if (pci_resource_len(pdev, bar) == 0)
 		return 0;
-		
+	if (!(pdev->bars_enabled & (1 << bar))) {
+		dev_warn(&pdev->dev,
+			 "Trying to request region #%d that is not enabled\n",
+			 bar + 1);
+		goto err_out;
+	}
 	if (pci_resource_flags(pdev, bar) & IORESOURCE_IO) {
 		if (!request_region(pci_resource_start(pdev, bar),
 			    pci_resource_len(pdev, bar), res_name))
@@ -692,7 +705,8 @@
 	int i;
 	
 	for (i = 0; i < 6; i++)
-		pci_release_region(pdev, i);
+		if (pdev->bars_enabled & (1 << i))
+			pci_release_region(pdev, i);
 }
 
 /**
@@ -713,13 +727,15 @@
 	int i;
 	
 	for (i = 0; i < 6; i++)
-		if(pci_request_region(pdev, i, res_name))
-			goto err_out;
+		if (pdev->bars_enabled & (1 << i))
+			if(pci_request_region(pdev, i, res_name))
+				goto err_out;
 	return 0;
 
 err_out:
 	while(--i >= 0)
-		pci_release_region(pdev, i);
+		if (pdev->bars_enabled & (1 << i))
+			pci_release_region(pdev, i);
 		
 	return -EBUSY;
 }
Index: linux-2.6.16-mm1/include/linux/pci.h
===================================================================
--- linux-2.6.16-mm1.orig/include/linux/pci.h	2006-03-23 20:04:06.000000000 +0900
+++ linux-2.6.16-mm1/include/linux/pci.h	2006-03-23 20:04:11.000000000 +0900
@@ -169,6 +169,7 @@
 	struct bin_attribute *rom_attr; /* attribute descriptor for sysfs ROM entry */
 	int rom_attr_enabled;		/* has display of the rom attribute been enabled? */
 	struct bin_attribute *res_attr[DEVICE_COUNT_RESOURCE]; /* sysfs file for resources */
+	int	bars_enabled;		/* BARs enabled */
 };
 
 #define pci_dev_g(n) list_entry(n, struct pci_dev, global_list)
@@ -732,6 +733,17 @@
 }
 #endif /* HAVE_ARCH_PCI_RESOURCE_TO_USER */
 
+/*
+ * This helper routine makes bar mask from the type of resource.
+ */
+static inline int pci_select_bars(struct pci_dev *dev, unsigned long flags)
+{
+	int i, bars = 0;
+	for (i = 0; i < PCI_NUM_RESOURCES; i++)
+		if (pci_resource_flags(dev, i) & flags)
+			bars |= (1 << i);
+	return bars;
+}
 
 /*
  *  The world is not perfect and supplies us with broken PCI devices.


  reply	other threads:[~2006-03-24  5:39 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-03-24  5:26 [PATCH 2.6.16-mm1 0/4] PCI legacy I/O port free driver (take 6) Kenji Kaneshige
2006-03-24  5:31 ` Kenji Kaneshige [this message]
2006-03-24  9:36   ` [PATCH 2.6.16-mm1 1/4] PCI legacy I/O port free driver (take 6) - Changes to generic PCI code Andrew Morton
2006-03-27  5:35     ` Kenji Kaneshige
2006-03-24  5:32 ` [PATCH 2.6.16-mm1 2/4] PCI legacy I/O port free driver (take 6) - Update Documentation/pci.txt Kenji Kaneshige
2006-03-24 16:24   ` Grant Grundler
2006-03-24  5:34 ` [PATCH 2.6.16-mm1 3/4] PCI legacy I/O port free driver (take 6) - Make Intel e1000 driver legacy I/O port free Kenji Kaneshige
2006-03-24  5:36 ` [PATCH 2.6.16-mm1 4/4] PCI legacy I/O port free driver (take 6) - Make Emulex lpfc " Kenji Kaneshige

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=44238424.3080500@jp.fujitsu.com \
    --to=kaneshige.kenji@jp.fujitsu.com \
    --cc=akpm@osdl.org \
    --cc=greg@kroah.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@atrey.karlin.mff.cuni.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox