From: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
To: Greg KH <greg@kroah.com>
Cc: Linux Kernel list <linux-kernel@vger.kernel.org>,
linux-ia64@vger.kernel.org, linux-pci@atrey.karlin.mff.cuni.cz
Subject: [PATCH 4/6] PCIERR : interfaces for synchronous I/O error detection on driver (mcadrv)
Date: Fri, 24 Mar 2006 16:50:12 +0900 [thread overview]
Message-ID: <4423A4B4.4080408@jp.fujitsu.com> (raw)
In-Reply-To: <20060322210157.GH12335@kroah.com>
This patch is 3/4 of PCIERR implementation for IA64.
This part describes modifies in mca_drv.
If MCA happens and the error address was in resource of registered
RAS-aware driver, mca_drv notify the error to the driver and
restart the system. Soon notified driver will do its recovery.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
-----
arch/ia64/kernel/mca_drv.c | 81 +++++++++++++++++++++++++++++++++++++++++++
arch/ia64/lib/pcierr_check.c | 1
2 files changed, 82 insertions(+)
Index: linux-2.6.16_WORK/arch/ia64/kernel/mca_drv.c
===================================================================
--- linux-2.6.16_WORK.orig/arch/ia64/kernel/mca_drv.c
+++ linux-2.6.16_WORK/arch/ia64/kernel/mca_drv.c
@@ -37,6 +37,11 @@
#include "mca_drv.h"
+#ifdef CONFIG_PCIERR_CHECK
+#include <linux/pci.h>
+extern struct list_head pcierr_list;
+#endif
+
/* max size of SAL error record (default) */
static int sal_rec_max = 10000;
@@ -399,6 +404,76 @@
return MCA_IS_GLOBAL;
}
+#ifdef CONFIG_PCIERR_CHECK
+
+/**
+ * get_target_identifier - get address of target_identifier
+ * @peidx: pointer of index of processor error section
+ *
+ * Return value:
+ * addr if valid / 0 if not valid
+ */
+static u64 get_target_identifier(peidx_table_t *peidx)
+{
+ sal_log_mod_error_info_t *smei;
+
+ smei = peidx_bus_check(peidx, 0);
+ if (smei->valid.target_identifier)
+ return (smei->target_identifier);
+ return 0;
+}
+
+#define isMEM64(resource) \
+(((resource).flags & (PCI_BASE_ADDRESS_SPACE|PCI_BASE_ADDRESS_MEM_TYPE_MASK)) \
+ == (PCI_BASE_ADDRESS_SPACE_MEMORY|PCI_BASE_ADDRESS_MEM_TYPE_64))
+
+/**
+ * pcierr_recovery - Check if MCA occur on transaction in pcierr_list.
+ * @peidx: pointer of index of processor error section
+ *
+ * Return value:
+ * 1 if error could be caught in driver / 0 if not
+ */
+static int pcierr_recovery(peidx_table_t *peidx)
+{
+ u64 addr;
+ int i, loop = 0;
+ struct pci_dev *tdev;
+ iocookie *cookie;
+
+ if (list_empty(&pcierr_list))
+ return 0;
+
+ addr = get_target_identifier(peidx);
+ if (!addr)
+ return 0;
+
+ list_for_each_entry(cookie, &pcierr_list, list) {
+ /* MCA is non-maskable, be careful */
+ if (loop++ > 1024 || !cookie)
+ break;
+ /* double check */
+ if (pcierr_list.next == cookie->list.next)
+ break;
+ tdev = cookie->dev;
+ if (!tdev)
+ continue;
+ for (i = 0; i < PCI_ROM_RESOURCE; i++) {
+ if (tdev->resource[i].start <= addr
+ && addr <= tdev->resource[i].end) {
+ cookie->error = 1;
+ return 1;
+ }
+ if (isMEM64(tdev->resource[i]))
+ i++;
+ }
+ }
+
+ return 0;
+}
+
+#endif /* CONFIG_PCIERR_CHECK */
+
/**
* recover_from_read_error - Try to recover the errors which type are "read"s.
* @slidx: pointer of index of SAL error record
@@ -473,6 +548,12 @@
}
+#ifdef CONFIG_PCIERR_CHECK
+ /* Are there any RAS-aware drivers? */
+ if (pcierr_recovery(peidx))
+ return 1;
+#endif
+
return 0;
}
Index: linux-2.6.16_WORK/arch/ia64/lib/pcierr_check.c
===================================================================
--- linux-2.6.16_WORK.orig/arch/ia64/lib/pcierr_check.c
+++ linux-2.6.16_WORK/arch/ia64/lib/pcierr_check.c
@@ -68,5 +68,6 @@
return 0;
}
+EXPORT_SYMBOL(pcierr_list); /* for MCA driver */
EXPORT_SYMBOL(pcierr_read);
EXPORT_SYMBOL(pcierr_clear);
next prev parent reply other threads:[~2006-03-24 7:52 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-03-22 8:38 [PATCH] PCIERR : interfaces for synchronous I/O error detection on driver Hidetoshi Seto
2006-03-22 21:01 ` Greg KH
2006-03-24 7:47 ` [PATCH 1/6] " Hidetoshi Seto
2006-03-24 23:43 ` Linas Vepstas
2006-03-27 2:37 ` Hidetoshi Seto
2006-03-31 22:01 ` Linas Vepstas
2006-04-03 4:54 ` Hidetoshi Seto
2006-03-24 7:48 ` [PATCH 2/6] PCIERR : interfaces for synchronous I/O error detection on driver (config) Hidetoshi Seto
2006-03-24 7:49 ` [PATCH 3/6] PCIERR : interfaces for synchronous I/O error detection on driver (base) Hidetoshi Seto
2006-03-24 7:50 ` Hidetoshi Seto [this message]
2006-03-24 7:51 ` [PATCH 5/6] PCIERR : interfaces for synchronous I/O error detection on driver (poison) Hidetoshi Seto
2006-03-24 7:52 ` [PATCH 6/6] PCIERR : interfaces for synchronous I/O error detection on driver (sample: Fusion MPT) Hidetoshi Seto
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4423A4B4.4080408@jp.fujitsu.com \
--to=seto.hidetoshi@jp.fujitsu.com \
--cc=greg@kroah.com \
--cc=linux-ia64@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@atrey.karlin.mff.cuni.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox