* promise tx2plus SATA controller and ATAPI
@ 2006-03-25 15:41 Hinrich Aue
2006-03-26 0:04 ` Jeff Garzik
0 siblings, 1 reply; 2+ messages in thread
From: Hinrich Aue @ 2006-03-25 15:41 UTC (permalink / raw)
To: linux-kernel
hello there,
I purchased a promise TX2Plus SATA controller.
Works fine so far, but I also bought a SATA DVD writer.
The TX2Plus supports SATA ATAPI, and recognizes my burner correctly.
But in the boot messages it says:
ata2(0): WARNING: ATAPI is not supported with this driver, device ignored.
Is there a way to use the burner with this controller?
If not, are there plans to enable ATAPI for the sata_promise driver?
Thanks in advance,
Hinrich
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: promise tx2plus SATA controller and ATAPI
2006-03-25 15:41 promise tx2plus SATA controller and ATAPI Hinrich Aue
@ 2006-03-26 0:04 ` Jeff Garzik
0 siblings, 0 replies; 2+ messages in thread
From: Jeff Garzik @ 2006-03-26 0:04 UTC (permalink / raw)
To: Hinrich Aue; +Cc: linux-kernel
Hinrich Aue wrote:
> hello there,
>
> I purchased a promise TX2Plus SATA controller.
> Works fine so far, but I also bought a SATA DVD writer.
> The TX2Plus supports SATA ATAPI, and recognizes my burner correctly.
> But in the boot messages it says:
>
> ata2(0): WARNING: ATAPI is not supported with this driver, device ignored.
>
> Is there a way to use the burner with this controller?
In theory, yes. Presently, no.
> If not, are there plans to enable ATAPI for the sata_promise driver?
Eventually, yes.
Jeff
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2006-03-26 0:04 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-03-25 15:41 promise tx2plus SATA controller and ATAPI Hinrich Aue
2006-03-26 0:04 ` Jeff Garzik
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox