Virtual Serial Port

Virtual Serial Port

[Mikado]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

My machine has only one serial port. Now I want to add more *software*
(virtual) serial ports. I also want to make a virtual serial cable
between a real serial port and a virtual one OR between virtual ports.
Is there any way to solve that problem in our universe?

Thanks,
Mikado.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2.2 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFEJYK3NWc9T2Wr2JcRAro+AKCMMf5So3sPJ+gXzSN+eYk0RXBxsQCg2V6I
UK2pvLjQIECVc3e1//7d0WE=
=GroY
-----END PGP SIGNATURE-----

Re: Virtual Serial Port

[Jan Engelhardt]

>My machine has only one serial port. Now I want to add more *software*
>(virtual) serial ports. I also want to make a virtual serial cable
>between a real serial port and a virtual one OR between virtual ports.
>Is there any way to solve that problem in our universe?

You could write a device driver implementing virtual serial ports. Then you 
just add an ioctl that connects/disconnects virtual ports to real ports if 
desired.
I do not quite see what this would be good for, but I am sure it's 
good for learning or for fun. :)



Jan Engelhardt
-- 

Re: Virtual Serial Port

[Mikado]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

> You could write a device driver implementing virtual serial ports. Then you 
> just add an ioctl that connects/disconnects virtual ports to real ports if 
> desired.
> I do not quite see what this would be good for, but I am sure it's 
> good for learning or for fun. :)

Hi Jan Engelhardt,

My purpose is to provide serial interfaces for debugging. My real box
acts as remote host connecting to VMWare box by a *virtual* serial cable
so that I can set up a debugging environment.

There are several solutions for this problem but they could only run on
Windows. Eg:
- - http://www.mks.zp.ua/vspdxp.php
- - http://www.virtual-serial-port.com/virtual-serial-port-kit.html

I'll buy an USB-to-Serial cable and a Serial-Serial cable to solve this
problem but it's also interesting for me to write such device driver.
I'll try it later.

Mikado
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2.2 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFEJfshNWc9T2Wr2JcRAhPwAJ9d/eifASrLPvJwOy6A4sSxgzMc0gCcChrG
rSL3gqaTWernckeKhfc+wqY=
=wIb+
-----END PGP SIGNATURE-----

Re: Virtual Serial Port

[Anderson Lizardo]

On 3/25/06, Mikado <mikado4vn@gmail.com> wrote:
> My purpose is to provide serial interfaces for debugging. My real box
> acts as remote host connecting to VMWare box by a *virtual* serial cable
> so that I can set up a debugging environment.

Have you tried using software-based serial snoopers? See e.g.
http://freshmeat.net/snooper and
http://packages.debian.org/unstable/comm/snooper. Haven't tried any of
these but they seem to do what you describe.

Regards,
--
Anderson Lizardo
Embedded Linux Lab - 10LE
Nokia Institute of Technology - INdT
Manaus - Brazil

Re: Virtual Serial Port

[Joshua Hudson]

>
> My purpose is to provide serial interfaces for debugging. My real box
> acts as remote host connecting to VMWare box by a *virtual* serial cable
> so that I can set up a debugging environment.
>
[snip]
>
> Mikado

I wonder if either ptyp/ttyp or pts/ interfaces would suit your
purpose. They are
supposed to appear on one side to be virtual serial ports.

Re: Virtual Serial Port

[Jan Engelhardt]

>> You could write a device driver implementing virtual serial ports. Then you 
>> just add an ioctl that connects/disconnects virtual ports to real ports if 
>> desired.
>> I do not quite see what this would be good for, but I am sure it's 
>> good for learning or for fun. :)
>
>My purpose is to provide serial interfaces for debugging. My real box
>acts as remote host connecting to VMWare box by a *virtual* serial cable
>so that I can set up a debugging environment.
>
Ah! You don't want to have the X11 overhead of VMware. Quite an idea.
If I get it right, your setup looks like:

  guest writes to /dev/ttyS0
  vmware connects its virtual S0 to the host's ttyFakeS0
  minicom on the host to ttyFakeS0
or even
  vmware S0 to host's ttyS0
  other remote machine do minicom to ttyS0

The reason for FakeS0 is that vmware does not know about ptys, 
unfortunately.


Jan Engelhardt
-- 

Re: Virtual Serial Port

[Mikado]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

>   guest writes to /dev/ttyS0
>   vmware connects its virtual S0 to the host's ttyFakeS0
>   minicom on the host to ttyFakeS0
> or even
>   vmware S0 to host's ttyS0
>   other remote machine do minicom to ttyS0
> 
> The reason for FakeS0 is that vmware does not know about ptys, 
> unfortunately.

Yes, VMWare doesn't support serial port using host's ttys any more. My
idea is:

[host - application] <- read/write -> [virtual serial port
/dev/ttyFakeS0] <- read/write over virtual null-modem serial cable ->
[host - real serial port /dev/ttyS0] <- read/write -> [VMWare - application]

But today I've just bought an USB-to-Serial converter and made for
myself a null-modem serial cable. I use this null-modem cable to connect
/dev/ttyS0 (native serial port) to /dev/tts/USB0 (USB-based serial
port). My VMWare now can use one of those devices and the host use
another one. Now above figure can be re-drawn like this:

[host - application] <- read/write -> [/dev/tts/USB0] <- read/write over
physical null-modem cable -> [/dev/ttyS0] <- read/write -> [VMWare -
application]

Anyway, later I'll try to write a device drivers act as virtual serial
ports and virtual null-modem cables.

Best regards,
Mikado.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2.2 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFEJsrfNWc9T2Wr2JcRAl05AJ9Ee8zqagf0yjDk71mFAxwSskFltQCg0aM8
mELZ8uxHPaSYzLiZLM7Cxy4=
=zI/+
-----END PGP SIGNATURE-----

Re: Virtual Serial Port

[Petr Vandrovec]

Mikado wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> 
> 
>>  guest writes to /dev/ttyS0
>>  vmware connects its virtual S0 to the host's ttyFakeS0
>>  minicom on the host to ttyFakeS0
>>or even
>>  vmware S0 to host's ttyS0
>>  other remote machine do minicom to ttyS0
>>
>>The reason for FakeS0 is that vmware does not know about ptys, 
>>unfortunately.
> 
> 
> Yes, VMWare doesn't support serial port using host's ttys any more. My
> idea is:
> 
> [host - application] <- read/write -> [virtual serial port
> /dev/ttyFakeS0] <- read/write over virtual null-modem serial cable ->
> [host - real serial port /dev/ttyS0] <- read/write -> [VMWare - application]

Although it is quite irrelevant to LKML (you may want to visit 
www.vmware.com/community/index.jspa and ask there...), you can connect guest's 
serial port also to Unix socket - and in such situation you need virtual serial 
port driver only if 'host - application' does not know how to use /dev/tty* (for 
unix socket <-> /dev/ptyp* app look at 
http://platan.vc.cvut.cz/ftp/pub/vmware/serpipe.tar.gz).
								Petr

Re: Virtual Serial Port

[Mikado]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Petr Vandrovec wrote:
> Although it is quite irrelevant to LKML (you may want to visit
> www.vmware.com/community/index.jspa and ask there...), you can connect
> guest's serial port also to Unix socket - and in such situation you need
> virtual serial port driver only if 'host - application' does not know
> how to use /dev/tty* (for unix socket <-> /dev/ptyp* app look at
> http://platan.vc.cvut.cz/ftp/pub/vmware/serpipe.tar.gz).
>                                 Petr


Thank Petr. It also works well. That program acts as a data proxy
between unix socket and /dev/ptyp*. Yesterday I wrote a similar program
that read/write vmware's server unix sock then forward/backward data
to/from /dev/ptyp0 but it didn't work. Maybe my program has problem.
Thanks again.

Mikado
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2.2 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFEJ1wsNWc9T2Wr2JcRArmmAJ483BmLFrY+aIR71u/BQH+XCs8tIQCfZGs1
uTwfbeYTsFg0Iq9/FL/82I4=
=dgch
-----END PGP SIGNATURE-----

Re: Virtual Serial Port

[Holy Aavu]

On 3/25/06, Mikado <mikado4vn@gmail.com> wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> My machine has only one serial port. Now I want to add more *software*
> (virtual) serial ports. I also want to make a virtual serial cable
> between a real serial port and a virtual one OR between virtual ports.
> Is there any way to solve that problem in our universe?

I have a doubt... I am not sure if you can have a full working
solution to make all programs run using the virtual serial ports.
Because, there *might* be some programs which actually use the 'in'
and 'out' instructions of the processor directly from a user space
program. (After calling iopl/ioperm etc to elevate their I/O
privileges to directly use the IO ports) I dont think even a kernel
change can help in that case...

Is my understanding correct or am I missing something?

>
> Thanks,
> Mikado.
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.2.2 (GNU/Linux)
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
>
> iD8DBQFEJYK3NWc9T2Wr2JcRAro+AKCMMf5So3sPJ+gXzSN+eYk0RXBxsQCg2V6I
> UK2pvLjQIECVc3e1//7d0WE=
> =GroY
> -----END PGP SIGNATURE-----
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>