From: Kalin KOZHUHAROV <kalin@thinrope.net>
To: linux-kernel@vger.kernel.org
Cc: Greg KH <greg@kroah.com>, Folkert van Heusden <folkert@vanheusden.com>
Subject: [2.6 PATCH] add support for Papouch TMU (USB thermometer)
Date: Tue, 28 Mar 2006 20:41:26 +0900 [thread overview]
Message-ID: <442920E6.3020603@thinrope.net> (raw)
In-Reply-To: <20060326180309.GD3569@vanheusden.com>
Hello Greg,
As the time flies by, I think it is better to have this patch in for now
and leave the "big mess" for later and another thread...
(the "big mess" refers as UTF-8 and other soup of encodings in kernel
code + tab and space usage).
The patch below applies (with fuzz 2, which I hope is OK) to 2.6.16 and
2.6.16.1 vanilla. The original submitter to LKML was Folkert van Heusden
and that is why I have included his name in the code. I have just
cleaned his code and fixed the style. Not sure of the order of
Signed-off-by lines, change it if you need.
The patch as submitted below was tested with the actual device by
Folkert and reported working.
This patch adds support for new vendor (papouch) and one of their
devices - TMU (a USB thermometer).
More information:
vendor homepage:
http://www.papouch.com/en/
product homepage (Polish):
http://www.papouch.com/shop/scripts/_detail.asp?katcislo=0188
This patch is based on the submission from Folkert van Heusden [1].
Then reviseted by Kalin KOZHUHAROV [2] and retested by Folkert.
[1] http://article.gmane.org/gmane.linux.kernel/392970
[2] http://article.gmane.org/gmane.linux.kernel/393386
Signed-off-by: Folkert van Heusden <folkert@vanheusden.com>
Signed-off-by: Kalin KOZHUHAROV <kalin@thinrope.net>
diff -pruN linux-2.6.16-K01/drivers/usb/serial/ftdi_sio.c linux-2.6.16-tmp/drivers/usb/serial/ftdi_sio.c
--- linux-2.6.16-K01/drivers/usb/serial/ftdi_sio.c 2006-03-20 14:53:29.000000000 +0900
+++ linux-2.6.16-tmp/drivers/usb/serial/ftdi_sio.c 2006-03-27 00:52:20.000000000 +0900
@@ -492,6 +492,7 @@ static struct usb_device_id id_table_com
{ USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_777_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_8900F_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) },
+ { USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
diff -pruN linux-2.6.16-K01/drivers/usb/serial/ftdi_sio.h linux-2.6.16-tmp/drivers/usb/serial/ftdi_sio.h
--- linux-2.6.16-K01/drivers/usb/serial/ftdi_sio.h 2006-03-27 00:49:43.000000000 +0900
+++ linux-2.6.16-tmp/drivers/usb/serial/ftdi_sio.h 2006-03-27 00:46:55.000000000 +0900
@@ -392,6 +392,15 @@
#define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */
#define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */
+/*
+ * Papouch products (http://www.papouch.com/)
+ * Submitted by Folkert van Heusden
+ */
+
+#define PAPOUCH_VID 0x5050 /* Vendor ID */
+#define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */
+
+
/* Commands */
#define FTDI_SIO_RESET 0 /* Reset the port */
#define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */
--
|[ ~~~~~~~~~~~~~~~~~~~~~~ ]|
+-> http://ThinRope.net/ <-+
|[ ______________________ ]|
next prev parent reply other threads:[~2006-03-28 11:41 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-03-26 16:11 [2.6 PATCH 0/2]: Cleanup/Update FTDI_SIO Kalin KOZHUHAROV
2006-03-26 16:30 ` [2.6 PATCH 2/2]: add support for Papouch TMU (USB thermometer) Kalin KOZHUHAROV
2006-03-26 18:03 ` Folkert van Heusden
2006-03-28 11:41 ` Kalin KOZHUHAROV [this message]
2006-03-26 18:04 ` [2.6 PATCH 0/2]: Cleanup/Update FTDI_SIO Kalin KOZHUHAROV
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=442920E6.3020603@thinrope.net \
--to=kalin@thinrope.net \
--cc=folkert@vanheusden.com \
--cc=greg@kroah.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox