Re: [BUG] 2.6.16.2 (like olders) fails to suspend audio device

[Patrizio Bassi <patrizio.bassi@gmail.com>]

Lee Revell ha scritto:
> It would help if you cc'ed the right list (added)
>
> On Sat, 2006-04-08 at 15:31 +0200, Patrizio Bassi wrote:
>   
>> I've already posted same bug some weeks ago.
>>
>> this is just a reminder and to confirm bug is still there.
>>
>> 00:0b.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI] (rev 01)
>>
>> Alsa driver: 1370
>>
>> 1) if builtin in kernel, on resume it doesn't work any more.
>> 2) if built as module on resume it works with no need to remove/readd 
>> module.
>>
>> in both situations dmesg shows:
>>
>> pnp: Failed to activate device 00:0b.
>>
>>
>> Stopping tasks: ===========================================|
>> Shrinking memory... done (39214 pages freed)
>> pnp: Device 00:0c disabled.
>> pnp: Device 00:08 disabled.
>> swsusp: Need to copy 13752 pages
>> ACPI: PCI Interrupt 0000:00:04.2[D] -> Link [LNKD] -> GSI 9 (level, low) 
>> -> IRQ 9
>> ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKD] -> GSI 9 (level, low) 
>> -> IRQ 9
>> ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKD] -> GSI 9 (level, low) 
>> -> IRQ 9
>> ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 5 (level, low) 
>> -> IRQ 5
>> ACPI: PCI Interrupt 0000:00:0a.1[B] -> Link [LNKD] -> GSI 9 (level, low) 
>> -> IRQ 9
>> ACPI: PCI Interrupt 0000:00:0a.2[C] -> Link [LNKA] -> GSI 11 (level, 
>> low) -> IRQ 11
>> usb usb1: root hub lost power or was reset
>> ehci_hcd 0000:00:0a.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
>> ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 10 (level, 
>> low) -> IRQ 10
>> pnp: Device 00:08 activated.
>> pnp: Failed to activate device 00:0b.
>> pnp: Device 00:0c activated.
>> Restarting tasks... done
>> agpgart: Found an AGP 1.0 compliant device at 0000:00:00.0.
>> agpgart: Putting AGP V2 device at 0000:00:00.0 into 2x mode
>> agpgart: Putting AGP V2 device at 0000:01:00.0 into 2x mode
>>
>> lspci
>> 00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host 
>> bridge (rev 03)
>> 00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP 
>> bridge (rev 03)
>> 00:04.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
>> 00:04.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
>> 00:04.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
>> 00:04.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
>> 00:09.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] 
>> (rev 74)
>> 00:0a.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
>> Controller (rev 50)
>> 00:0a.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
>> Controller (rev 50)
>> 00:0a.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51)
>> 00:0b.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI] (rev 01)
>> 01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 RF/SG AGP
>>
>>
>> dmesg says 00:08 and 00:0c are activated..but i've no idea which devices 
>> they are, lspci -vv shows nothing about that.
>>
>> Ready to give more infos and test patches.
>>
>> Patrizio Bassi
>>
>>     
>   
you're right, sorry, but, having the strange devices in dmesg let me 
think that's a problem
in suspend too.