From: Gaurav Kohli <gkohli@codeaurora.org>
To: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
linux-kernel@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH v2] nvmem: core: Set no-read-write provider to avoid userspace read/write
Date: Fri, 22 Mar 2019 23:42:43 +0530 [thread overview]
Message-ID: <4451d4f2-d651-9db6-99af-e07870fc699a@codeaurora.org> (raw)
In-Reply-To: <cfa22512-2abe-f0db-0576-e6d0cd1eee9c@linaro.org>
Hi Srinivas,
Thanks for the patch, Something like this only i have tested in the
morning, instead of unused, i have put dev group inside config as well.
We will test the exact patch and update the same.
Regards
Gaurav
On 3/22/2019 8:32 PM, Srinivas Kandagatla wrote:
>
>
> On 20/03/2019 17:50, Gaurav Kohli wrote:
>>
>>> Is root only option not helping you in this case?
>> Yes we want to protect at root level as well, i mean it is better if
>> we can avoid exposing to userspace at all.
> Can you try below patch!
>
>>>
>>> We could go down the route of adding new config option something
>>> like CONFIG_NVMEM_NO_SYSFS_ENTRY to prevent adding nvmem entry in
>>> userspace.
>>>
>>> Let me know if you are happy to create a patch for this change?
>>
>> I am happy with either way config option or dt binding(seems easy),
>> please let me know we will post new patch for the same.
> DT way is totally NAK.
>
>
> --------------------------->cut<-----------------------------------
>
> From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> Date: Wed, 20 Mar 2019 16:15:21 +0000
> Subject: [PATCH] nvmem: core: add support to NVMEM_NO_SYSFS_ENTRY
>
> Some users might not want to expose nvmem entry to sysfs and
> only intend to use kernel interface so add such provision.
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
> Documentation/ABI/stable/sysfs-bus-nvmem | 2 ++
> drivers/nvmem/Kconfig | 5 +++++
> drivers/nvmem/core.c | 11 ++++++-----
> 3 files changed, 13 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/ABI/stable/sysfs-bus-nvmem
> b/Documentation/ABI/stable/sysfs-bus-nvmem
> index 5923ab4620c5..12aab0a85fea 100644
> --- a/Documentation/ABI/stable/sysfs-bus-nvmem
> +++ b/Documentation/ABI/stable/sysfs-bus-nvmem
> @@ -6,6 +6,8 @@ Description:
> This file allows user to read/write the raw NVMEM contents.
> Permissions for write to this file depends on the nvmem
> provider configuration.
> + Note: This file is not present if CONFIG_NVMEM_NO_SYSFS_ENTRY
> + is enabled
>
> ex:
> hexdump /sys/bus/nvmem/devices/qfprom0/nvmem
> diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
> index 0a7a470ee859..6ab3276d287c 100644
> --- a/drivers/nvmem/Kconfig
> +++ b/drivers/nvmem/Kconfig
> @@ -192,4 +192,9 @@ config SC27XX_EFUSE
> This driver can also be built as a module. If so, the module
> will be called nvmem-sc27xx-efuse.
>
> +config NVMEM_NO_SYSFS_ENTRY
> + bool "No nvmem sysfs entry"
> +
> + help
> + Say Yes if you do not want to add nvmem entry to sysfs.
> endif
> diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
> index b9a0270883a0..c70f183fe379 100644
> --- a/drivers/nvmem/core.c
> +++ b/drivers/nvmem/core.c
> @@ -216,7 +216,7 @@ static const struct attribute_group
> nvmem_bin_rw_group = {
> .attrs = nvmem_attrs,
> };
>
> -static const struct attribute_group *nvmem_rw_dev_groups[] = {
> +static const __maybe_unused struct attribute_group
> *nvmem_rw_dev_groups[] = {
> &nvmem_bin_rw_group,
> NULL,
> };
> @@ -240,7 +240,7 @@ static const struct attribute_group
> nvmem_bin_ro_group = {
> .attrs = nvmem_attrs,
> };
>
> -static const struct attribute_group *nvmem_ro_dev_groups[] = {
> +static const __maybe_unused struct attribute_group
> *nvmem_ro_dev_groups[] = {
> &nvmem_bin_ro_group,
> NULL,
> };
> @@ -265,7 +265,7 @@ static const struct attribute_group
> nvmem_bin_rw_root_group = {
> .attrs = nvmem_attrs,
> };
>
> -static const struct attribute_group *nvmem_rw_root_dev_groups[] = {
> +static const __maybe_unused struct attribute_group
> *nvmem_rw_root_dev_groups[] = {
> &nvmem_bin_rw_root_group,
> NULL,
> };
> @@ -289,7 +289,7 @@ static const struct attribute_group
> nvmem_bin_ro_root_group = {
> .attrs = nvmem_attrs,
> };
>
> -static const struct attribute_group *nvmem_ro_root_dev_groups[] = {
> +static const __maybe_unused struct attribute_group
> *nvmem_ro_root_dev_groups[] = {
> &nvmem_bin_ro_root_group,
> NULL,
> };
> @@ -688,6 +688,7 @@ struct nvmem_device *nvmem_register(const struct
> nvmem_config *config)
> nvmem->read_only = device_property_present(config->dev,
> "read-only") |
> config->read_only;
>
> +#if !defined(CONFIG_NVMEM_NO_SYSFS_ENTRY)
> if (config->root_only)
> nvmem->dev.groups = nvmem->read_only ?
> nvmem_ro_root_dev_groups :
> @@ -696,7 +697,7 @@ struct nvmem_device *nvmem_register(const struct
> nvmem_config *config)
> nvmem->dev.groups = nvmem->read_only ?
> nvmem_ro_dev_groups :
> nvmem_rw_dev_groups;
> -
> +#endif
> device_initialize(&nvmem->dev);
>
> dev_dbg(&nvmem->dev, "Registering nvmem device %s\n", config->name);
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center,
Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project.
next prev parent reply other threads:[~2019-03-22 18:12 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-17 14:12 [PATCH v2] nvmem: core: Set no-read-write provider to avoid userspace read/write Gaurav Kohli
2019-03-20 14:34 ` Srinivas Kandagatla
2019-03-20 15:50 ` Gaurav Kohli
2019-03-20 16:26 ` Srinivas Kandagatla
2019-03-20 17:50 ` Gaurav Kohli
2019-03-21 13:14 ` Marc Gonzalez
2019-03-22 15:02 ` Srinivas Kandagatla
2019-03-22 18:12 ` Gaurav Kohli [this message]
2019-03-25 6:15 ` Gaurav Kohli
2019-04-01 4:52 ` Gaurav Kohli
2019-04-02 7:35 ` Niklas Cassel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4451d4f2-d651-9db6-99af-e07870fc699a@codeaurora.org \
--to=gkohli@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=srinivas.kandagatla@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox