From: Geoff Levand <geoffrey.levand@am.sony.com>
To: Segher Boessenkool <segher@kernel.crashing.org>
Cc: Arnd Bergmann <arnd@arndb.de>,
linuxppc-dev@ozlabs.org, paulus@samba.org,
Arnd Bergmann <arnd.bergmann@de.ibm.com>,
linux-kernel@vger.kernel.org, cbe-oss-dev@ozlabs.org
Subject: Re: [PATCH 11/13] cell: split out board specific files
Date: Mon, 01 May 2006 15:51:35 -0700 [thread overview]
Message-ID: <445690F7.5050605@am.sony.com> (raw)
In-Reply-To: <F989FA67-91B5-493B-9A12-D02C3C14A984@kernel.crashing.org>
Segher Boessenkool wrote:
>> Split the Cell BE support into generic and platform
>> dependant parts.
>>
>> Creates a new config variable CONFIG_PPC_IBM_CELL_BLADE.
>> The existing CONFIG_PPC_CELL is now used to denote the
>> generic Cell processor support. Also renames spu_priv1.c
>> to spu_priv1_mmio.c.
>
>> config CELL_IIC
>> - depends on PPC_CELL
>> + depends on PPC_IBM_CELL_BLADE
>> bool
>> default y
>
> Erm no... Make this
>
> depends on PPC_CELL && !SOME_HYPERVISOR_THING
>
> to reflect the _real_ dependency please? Similar in a few other
> places perhaps.
Seems CELL_IIC is never used. Must be some stale variable,
so I removed it. Arnd, could you ack this.
Segher, a problem with your suggestion is that our
makefiles don't have as rich a set of logical ops as the
config files. Its easy to express 'build A if B', but not
so easy to do 'build A if not C'. To make this work
cleanly I made PPC_CELL denote !SOME_HYPERVISOR_THING,
so I can have constructions like this in the makefile:
obj-$(CONFIG_PPC_CELL) += ...
I also got rid of SPUFS_PRIV1_MMIO, since SPUFS_PRIV1_MMIO
just meant spufs with !SOME_HYPERVISOR_THING.
Updated patch follows.
-Geoff
Split the Cell BPA support into generic and platform
dependant parts.
Creates new config variable CONFIG_PPC_IBM_CELL_BLADE.
Also renames spu_priv1.c to spu_priv1_mmio.c.
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Index: cell--alp--2/arch/powerpc/Kconfig
===================================================================
--- cell--alp--2.orig/arch/powerpc/Kconfig 2006-05-01 15:13:22.000000000 -0700
+++ cell--alp--2/arch/powerpc/Kconfig 2006-05-01 15:16:38.000000000 -0700
@@ -391,15 +391,20 @@
For more informations, refer to <http://www.970eval.com>
config PPC_CELL
- bool " Cell Broadband Processor Architecture"
+ bool
+ default n
+
+config PPC_IBM_CELL_BLADE
+ bool " IBM Cell Blade"
depends on PPC_MULTIPLATFORM && PPC64
+ select PPC_CELL
select PPC_RTAS
select MMIO_NVRAM
select PPC_UDBG_16550
config PPC_SYSTEMSIM
bool " IBM Full System Simulator (systemsim) support"
- depends on PPC_CELL || PPC_PSERIES || PPC_MAPLE
+ depends on PPC_IBM_CELL_BLADE || PPC_PSERIES || PPC_MAPLE
help
Support booting resulting image under IBMs Full System Simulator.
If you enable this option, you are able to select device
@@ -450,11 +455,6 @@
depends on PPC_MAPLE
default y
-config CELL_IIC
- depends on PPC_CELL
- bool
- default y
-
config IBMVIO
depends on PPC_PSERIES || PPC_ISERIES
bool
Index: cell--alp--2/arch/powerpc/configs/cell_defconfig
===================================================================
--- cell--alp--2.orig/arch/powerpc/configs/cell_defconfig 2006-05-01 15:13:22.000000000 -0700
+++ cell--alp--2/arch/powerpc/configs/cell_defconfig 2006-05-01 15:13:23.000000000 -0700
@@ -116,6 +116,7 @@
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
CONFIG_PPC_CELL=y
+CONFIG_PPC_IBM_CELL_BLADE=y
CONFIG_PPC_SYSTEMSIM=y
# CONFIG_U3_DART is not set
CONFIG_PPC_RTAS=y
@@ -123,7 +124,6 @@
CONFIG_RTAS_PROC=y
CONFIG_RTAS_FLASH=y
CONFIG_MMIO_NVRAM=y
-CONFIG_CELL_IIC=y
# CONFIG_PPC_MPC106 is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_WANT_EARLY_SERIAL is not set
@@ -133,6 +133,7 @@
#
CONFIG_BE_DD2=y
CONFIG_SPU_FS=m
+CONFIG_SPU_BASE=y
CONFIG_SPUFS_MMAP=y
#
Index: cell--alp--2/arch/powerpc/configs/systemsim_defconfig
===================================================================
--- cell--alp--2.orig/arch/powerpc/configs/systemsim_defconfig 2006-05-01 15:13:22.000000000 -0700
+++ cell--alp--2/arch/powerpc/configs/systemsim_defconfig 2006-05-01 15:13:23.000000000 -0700
@@ -117,6 +117,7 @@
# CONFIG_PPC_PMAC is not set
CONFIG_PPC_MAPLE=y
CONFIG_PPC_CELL=y
+CONFIG_PPC_IBM_CELL_BLADE=y
CONFIG_PPC_SYSTEMSIM=y
CONFIG_SYSTEMSIM_IDLE=y
CONFIG_XICS=y
@@ -128,7 +129,6 @@
# CONFIG_RTAS_FLASH is not set
CONFIG_MMIO_NVRAM=y
CONFIG_MPIC_BROKEN_U3=y
-CONFIG_CELL_IIC=y
CONFIG_IBMVIO=y
# CONFIG_IBMEBUS is not set
# CONFIG_PPC_MPC106 is not set
@@ -139,6 +139,7 @@
# Cell Broadband Engine options
#
CONFIG_SPU_FS=m
+CONFIG_SPU_BASE=y
#
# Kernel options
Index: cell--alp--2/arch/powerpc/platforms/cell/Kconfig
===================================================================
--- cell--alp--2.orig/arch/powerpc/platforms/cell/Kconfig 2006-05-01 15:13:22.000000000 -0700
+++ cell--alp--2/arch/powerpc/platforms/cell/Kconfig 2006-05-01 15:13:23.000000000 -0700
@@ -11,10 +11,15 @@
or may crash other CPUs.
Say 'n' here unless you expect to run on DD2.0 only.
+config SPU_BASE
+ bool
+ default n
+
config SPU_FS
tristate "SPU file system"
default m
depends on PPC_CELL
+ select SPU_BASE
help
The SPU file system is used to access Synergistic Processing
Units on machines implementing the Broadband Processor
Index: cell--alp--2/arch/powerpc/platforms/cell/Makefile
===================================================================
--- cell--alp--2.orig/arch/powerpc/platforms/cell/Makefile 2006-05-01 15:13:22.000000000 -0700
+++ cell--alp--2/arch/powerpc/platforms/cell/Makefile 2006-05-01 15:17:58.000000000 -0700
@@ -1,14 +1,14 @@
-obj-y += interrupt.o iommu.o setup.o spider-pic.o
-obj-y += pervasive.o pci.o
-
-obj-$(CONFIG_SMP) += smp.o
+obj-$(CONFIG_PPC_CELL) += interrupt.o iommu.o setup.o \
+ spider-pic.o pervasive.o pci.o
+ifeq ($(CONFIG_SMP),y)
+obj-$(CONFIG_PPC_CELL) += smp.o
+endif
# needed only when building loadable spufs.ko
-spufs-modular-$(CONFIG_SPU_FS) += spu_syscalls.o
-obj-y += $(spufs-modular-m)
-
-# always needed in kernel
-spufs-builtin-$(CONFIG_SPU_FS) += spu_callbacks.o spu_base.o spu_priv1.o
-obj-y += $(spufs-builtin-y) $(spufs-builtin-m)
-
-obj-$(CONFIG_SPU_FS) += spufs/
+spufs-modular-$(CONFIG_SPU_FS) += spu_syscalls.o
+obj-$(CONFIG_SPU_BASE) += spu_callbacks.o spu_base.o \
+ $(spufs-modular-m)
+ifdef CONFIG_SPU_FS
+obj-$(CONFIG_PPC_CELL) += spu_priv1_mmio.o
+endif
+obj-$(CONFIG_SPU_FS) += spufs/
Index: cell--alp--2/arch/powerpc/platforms/cell/spu_priv1.c
===================================================================
--- cell--alp--2.orig/arch/powerpc/platforms/cell/spu_priv1.c 2006-05-01 15:13:22.000000000 -0700
+++ cell--alp--2/arch/powerpc/platforms/cell/spu_priv1.c 2006-04-21 13:04:41.284693750 -0700
@@ -1,142 +0,0 @@
-/*
- * access to SPU privileged registers
- */
-#include <linux/module.h>
-
-#include <asm/io.h>
-#include <asm/spu.h>
-
-void spu_int_mask_and(struct spu *spu, int class, u64 mask)
-{
- u64 old_mask;
-
- old_mask = in_be64(&spu->priv1->int_mask_RW[class]);
- out_be64(&spu->priv1->int_mask_RW[class], old_mask & mask);
-}
-EXPORT_SYMBOL_GPL(spu_int_mask_and);
-
-void spu_int_mask_or(struct spu *spu, int class, u64 mask)
-{
- u64 old_mask;
-
- old_mask = in_be64(&spu->priv1->int_mask_RW[class]);
- out_be64(&spu->priv1->int_mask_RW[class], old_mask | mask);
-}
-EXPORT_SYMBOL_GPL(spu_int_mask_or);
-
-void spu_int_mask_set(struct spu *spu, int class, u64 mask)
-{
- out_be64(&spu->priv1->int_mask_RW[class], mask);
-}
-EXPORT_SYMBOL_GPL(spu_int_mask_set);
-
-u64 spu_int_mask_get(struct spu *spu, int class)
-{
- return in_be64(&spu->priv1->int_mask_RW[class]);
-}
-EXPORT_SYMBOL_GPL(spu_int_mask_get);
-
-void spu_int_stat_clear(struct spu *spu, int class, u64 stat)
-{
- out_be64(&spu->priv1->int_stat_RW[class], stat);
-}
-EXPORT_SYMBOL_GPL(spu_int_stat_clear);
-
-u64 spu_int_stat_get(struct spu *spu, int class)
-{
- return in_be64(&spu->priv1->int_stat_RW[class]);
-}
-EXPORT_SYMBOL_GPL(spu_int_stat_get);
-
-void spu_int_route_set(struct spu *spu, u64 route)
-{
- out_be64(&spu->priv1->int_route_RW, route);
-}
-EXPORT_SYMBOL_GPL(spu_int_route_set);
-
-u64 spu_mfc_dar_get(struct spu *spu)
-{
- return in_be64(&spu->priv1->mfc_dar_RW);
-}
-EXPORT_SYMBOL_GPL(spu_mfc_dar_get);
-
-u64 spu_mfc_dsisr_get(struct spu *spu)
-{
- return in_be64(&spu->priv1->mfc_dsisr_RW);
-}
-EXPORT_SYMBOL_GPL(spu_mfc_dsisr_get);
-
-void spu_mfc_dsisr_set(struct spu *spu, u64 dsisr)
-{
- out_be64(&spu->priv1->mfc_dsisr_RW, dsisr);
-}
-EXPORT_SYMBOL_GPL(spu_mfc_dsisr_set);
-
-void spu_mfc_sdr_set(struct spu *spu, u64 sdr)
-{
- out_be64(&spu->priv1->mfc_sdr_RW, sdr);
-}
-EXPORT_SYMBOL_GPL(spu_mfc_sdr_set);
-
-void spu_mfc_sr1_set(struct spu *spu, u64 sr1)
-{
- out_be64(&spu->priv1->mfc_sr1_RW, sr1);
-}
-EXPORT_SYMBOL_GPL(spu_mfc_sr1_set);
-
-u64 spu_mfc_sr1_get(struct spu *spu)
-{
- return in_be64(&spu->priv1->mfc_sr1_RW);
-}
-EXPORT_SYMBOL_GPL(spu_mfc_sr1_get);
-
-void spu_mfc_tclass_id_set(struct spu *spu, u64 tclass_id)
-{
- out_be64(&spu->priv1->mfc_tclass_id_RW, tclass_id);
-}
-EXPORT_SYMBOL_GPL(spu_mfc_tclass_id_set);
-
-u64 spu_mfc_tclass_id_get(struct spu *spu)
-{
- return in_be64(&spu->priv1->mfc_tclass_id_RW);
-}
-EXPORT_SYMBOL_GPL(spu_mfc_tclass_id_get);
-
-void spu_smm_pgsz_set(struct spu *spu, u64 pgsz)
-{
- u64 smm_hid;
- smm_hid = in_be64(&spu->priv1->smm_hid);
- smm_hid &= ~(0xfull << 60);
- smm_hid |= pgsz << 60;
- out_be64(&spu->priv1->smm_hid, smm_hid);
-}
-
-void spu_tlb_invalidate(struct spu *spu)
-{
- out_be64(&spu->priv1->tlb_invalidate_entry_W, 0ul);
-}
-EXPORT_SYMBOL_GPL(spu_tlb_invalidate);
-
-void spu_resource_allocation_groupID_set(struct spu *spu, u64 id)
-{
- out_be64(&spu->priv1->resource_allocation_groupID_RW, id);
-}
-EXPORT_SYMBOL_GPL(spu_resource_allocation_groupID_set);
-
-u64 spu_resource_allocation_groupID_get(struct spu *spu)
-{
- return in_be64(&spu->priv1->resource_allocation_groupID_RW);
-}
-EXPORT_SYMBOL_GPL(spu_resource_allocation_groupID_get);
-
-void spu_resource_allocation_enable_set(struct spu *spu, u64 enable)
-{
- out_be64(&spu->priv1->resource_allocation_enable_RW, enable);
-}
-EXPORT_SYMBOL_GPL(spu_resource_allocation_enable_set);
-
-u64 spu_resource_allocation_enable_get(struct spu *spu)
-{
- return in_be64(&spu->priv1->resource_allocation_enable_RW);
-}
-EXPORT_SYMBOL_GPL(spu_resource_allocation_enable_get);
Index: cell--alp--2/arch/powerpc/platforms/cell/spu_priv1_mmio.c
===================================================================
--- cell--alp--2.orig/arch/powerpc/platforms/cell/spu_priv1_mmio.c 2006-04-21 13:04:41.284693750 -0700
+++ cell--alp--2/arch/powerpc/platforms/cell/spu_priv1_mmio.c 2006-05-01 15:16:49.000000000 -0700
@@ -0,0 +1,142 @@
+/*
+ * access to SPU privileged registers
+ */
+#include <linux/module.h>
+
+#include <asm/io.h>
+#include <asm/spu.h>
+
+void spu_int_mask_and(struct spu *spu, int class, u64 mask)
+{
+ u64 old_mask;
+
+ old_mask = in_be64(&spu->priv1->int_mask_RW[class]);
+ out_be64(&spu->priv1->int_mask_RW[class], old_mask & mask);
+}
+EXPORT_SYMBOL_GPL(spu_int_mask_and);
+
+void spu_int_mask_or(struct spu *spu, int class, u64 mask)
+{
+ u64 old_mask;
+
+ old_mask = in_be64(&spu->priv1->int_mask_RW[class]);
+ out_be64(&spu->priv1->int_mask_RW[class], old_mask | mask);
+}
+EXPORT_SYMBOL_GPL(spu_int_mask_or);
+
+void spu_int_mask_set(struct spu *spu, int class, u64 mask)
+{
+ out_be64(&spu->priv1->int_mask_RW[class], mask);
+}
+EXPORT_SYMBOL_GPL(spu_int_mask_set);
+
+u64 spu_int_mask_get(struct spu *spu, int class)
+{
+ return in_be64(&spu->priv1->int_mask_RW[class]);
+}
+EXPORT_SYMBOL_GPL(spu_int_mask_get);
+
+void spu_int_stat_clear(struct spu *spu, int class, u64 stat)
+{
+ out_be64(&spu->priv1->int_stat_RW[class], stat);
+}
+EXPORT_SYMBOL_GPL(spu_int_stat_clear);
+
+u64 spu_int_stat_get(struct spu *spu, int class)
+{
+ return in_be64(&spu->priv1->int_stat_RW[class]);
+}
+EXPORT_SYMBOL_GPL(spu_int_stat_get);
+
+void spu_int_route_set(struct spu *spu, u64 route)
+{
+ out_be64(&spu->priv1->int_route_RW, route);
+}
+EXPORT_SYMBOL_GPL(spu_int_route_set);
+
+u64 spu_mfc_dar_get(struct spu *spu)
+{
+ return in_be64(&spu->priv1->mfc_dar_RW);
+}
+EXPORT_SYMBOL_GPL(spu_mfc_dar_get);
+
+u64 spu_mfc_dsisr_get(struct spu *spu)
+{
+ return in_be64(&spu->priv1->mfc_dsisr_RW);
+}
+EXPORT_SYMBOL_GPL(spu_mfc_dsisr_get);
+
+void spu_mfc_dsisr_set(struct spu *spu, u64 dsisr)
+{
+ out_be64(&spu->priv1->mfc_dsisr_RW, dsisr);
+}
+EXPORT_SYMBOL_GPL(spu_mfc_dsisr_set);
+
+void spu_mfc_sdr_set(struct spu *spu, u64 sdr)
+{
+ out_be64(&spu->priv1->mfc_sdr_RW, sdr);
+}
+EXPORT_SYMBOL_GPL(spu_mfc_sdr_set);
+
+void spu_mfc_sr1_set(struct spu *spu, u64 sr1)
+{
+ out_be64(&spu->priv1->mfc_sr1_RW, sr1);
+}
+EXPORT_SYMBOL_GPL(spu_mfc_sr1_set);
+
+u64 spu_mfc_sr1_get(struct spu *spu)
+{
+ return in_be64(&spu->priv1->mfc_sr1_RW);
+}
+EXPORT_SYMBOL_GPL(spu_mfc_sr1_get);
+
+void spu_mfc_tclass_id_set(struct spu *spu, u64 tclass_id)
+{
+ out_be64(&spu->priv1->mfc_tclass_id_RW, tclass_id);
+}
+EXPORT_SYMBOL_GPL(spu_mfc_tclass_id_set);
+
+u64 spu_mfc_tclass_id_get(struct spu *spu)
+{
+ return in_be64(&spu->priv1->mfc_tclass_id_RW);
+}
+EXPORT_SYMBOL_GPL(spu_mfc_tclass_id_get);
+
+void spu_smm_pgsz_set(struct spu *spu, u64 pgsz)
+{
+ u64 smm_hid;
+ smm_hid = in_be64(&spu->priv1->smm_hid);
+ smm_hid &= ~(0xfull << 60);
+ smm_hid |= pgsz << 60;
+ out_be64(&spu->priv1->smm_hid, smm_hid);
+}
+
+void spu_tlb_invalidate(struct spu *spu)
+{
+ out_be64(&spu->priv1->tlb_invalidate_entry_W, 0ul);
+}
+EXPORT_SYMBOL_GPL(spu_tlb_invalidate);
+
+void spu_resource_allocation_groupID_set(struct spu *spu, u64 id)
+{
+ out_be64(&spu->priv1->resource_allocation_groupID_RW, id);
+}
+EXPORT_SYMBOL_GPL(spu_resource_allocation_groupID_set);
+
+u64 spu_resource_allocation_groupID_get(struct spu *spu)
+{
+ return in_be64(&spu->priv1->resource_allocation_groupID_RW);
+}
+EXPORT_SYMBOL_GPL(spu_resource_allocation_groupID_get);
+
+void spu_resource_allocation_enable_set(struct spu *spu, u64 enable)
+{
+ out_be64(&spu->priv1->resource_allocation_enable_RW, enable);
+}
+EXPORT_SYMBOL_GPL(spu_resource_allocation_enable_set);
+
+u64 spu_resource_allocation_enable_get(struct spu *spu)
+{
+ return in_be64(&spu->priv1->resource_allocation_enable_RW);
+}
+EXPORT_SYMBOL_GPL(spu_resource_allocation_enable_get);
Index: cell--alp--2/drivers/net/Kconfig
===================================================================
--- cell--alp--2.orig/drivers/net/Kconfig 2006-05-01 15:13:22.000000000 -0700
+++ cell--alp--2/drivers/net/Kconfig 2006-05-01 15:13:23.000000000 -0700
@@ -2179,7 +2179,7 @@
config SPIDER_NET
tristate "Spider Gigabit Ethernet driver"
- depends on PCI && PPC_CELL
+ depends on PCI && PPC_IBM_CELL_BLADE
select FW_LOADER
help
This driver supports the Gigabit Ethernet chips present on the
next prev parent reply other threads:[~2006-05-01 22:52 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-04-29 23:28 [PATCH 00/13] Cell patches for 2.6.18 Arnd Bergmann
2006-04-29 23:28 ` [PATCH 01/13] cell: always build spu base into the kernel Arnd Bergmann
2006-04-29 23:28 ` [PATCH 02/13] spufs: restore mapping of mssync register Arnd Bergmann
2006-04-29 23:28 ` [PATCH 03/13] cell: fix interrupt priority handling Arnd Bergmann
2006-04-29 23:28 ` [PATCH 04/13] cell: remove broken __setup_cpu_be function Arnd Bergmann
2006-05-05 6:03 ` Paul Mackerras
2006-05-06 0:00 ` Geoff Levand
[not found] ` <C26C730943E01145B4F89E37FE0A022002BBC74B@itdsrvmail02.utep.edu>
2006-05-08 20:03 ` Information for setting up SMT related parameters on linux 2.6.16 on POWER5 Will Schmidt
2006-05-08 23:04 ` Segher Boessenkool
2006-04-29 23:28 ` [PATCH 05/13] cell: enable CPU_FTR_CI_LARGE_PAGE Arnd Bergmann
2006-04-29 23:28 ` [PATCH 06/13] powerpc: fix 64k pages on non-hypervisor Arnd Bergmann
2006-04-29 23:28 ` [PATCH 07/13] powerpc: export symbols for page size selection Arnd Bergmann
2006-05-05 5:56 ` Paul Mackerras
2006-05-05 9:12 ` Arnd Bergmann
2006-04-29 23:28 ` [PATCH 08/13] spufs: set up correct SLB entries for 64k pages Arnd Bergmann
2006-04-29 23:28 ` [PATCH 09/13] spufs: add a phys-id attribute to each SPU context Arnd Bergmann
2006-04-29 23:28 ` [PATCH 11/13] cell: split out board specific files Arnd Bergmann
2006-04-30 2:52 ` Segher Boessenkool
2006-05-01 22:51 ` Geoff Levand [this message]
2006-05-01 23:09 ` Segher Boessenkool
2006-05-01 23:49 ` [Cbe-oss-dev] " Arnd Bergmann
2006-05-01 23:50 ` Arnd Bergmann
2006-05-02 0:06 ` Segher Boessenkool
2006-05-02 10:59 ` Arnd Bergmann
2006-05-02 23:38 ` Segher Boessenkool
2006-05-03 0:18 ` Arnd Bergmann
2006-05-03 2:46 ` Paul Mackerras
2006-05-03 6:28 ` Segher Boessenkool
2006-05-04 2:03 ` Benjamin Herrenschmidt
2006-05-02 18:20 ` Geoff Levand
2006-05-02 18:30 ` Arnd Bergmann
2006-05-02 0:13 ` Michael Ellerman
2006-05-02 18:20 ` [Cbe-oss-dev] [PATCH 11/13] cell: split out board specificfil es Geoff Levand
2006-05-02 13:45 ` [PATCH 11/13] cell: split out board specific files Christoph Hellwig
2006-04-29 23:28 ` [PATCH 12/13] cell: abstract priviledge-1 SPU registers for hypervisors Arnd Bergmann
2006-04-29 23:28 ` [PATCH 13/13] cell: set SPU interrupt affinity in spu_priv1 code Arnd Bergmann
2006-04-29 23:42 ` [PATCH 10/13] cell: correctly detect systemsim host Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=445690F7.5050605@am.sony.com \
--to=geoffrey.levand@am.sony.com \
--cc=arnd.bergmann@de.ibm.com \
--cc=arnd@arndb.de \
--cc=cbe-oss-dev@ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=paulus@samba.org \
--cc=segher@kernel.crashing.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox