From: "Jan Beulich" <jbeulich@novell.com>
To: "Kristen Accardi" <kristen.c.accardi@intel.com>
Cc: <pcihpd-discuss@lists.sourceforge.net>, <linux-kernel@vger.kernel.org>
Subject: Re: [Pcihpd-discuss] [PATCH] correct pciehp init recovery
Date: Tue, 02 May 2006 12:32:20 +0200 [thread overview]
Message-ID: <44575154.76E4.0078.0@novell.com> (raw)
In-Reply-To: <1146245903.25490.10.camel@whizzy>
>>> Kristen Accardi <kristen.c.accardi@intel.com> 28.04.06 19:38 >>>
>On Fri, 2006-04-28 at 16:59 +0200, Jan Beulich wrote:
>> Clean up the recovery path from errors during pcie_init().
>>
>It's possible that this driver never actually requested an irq if was in
>poll mode. Then you will call free_irq, when what you really want to do
>is kill the timer that may have been started.
Thanks for pointing this out, here's the updated patch:
Clean up the recovery path from errors during pcie_init().
Signed-off-by: Jan Beulich <jbeulich@novell.com>
--- /home/jbeulich/tmp/linux-2.6.17-rc3/drivers/pci/hotplug/pciehp_hpc.c 2006-04-27 17:49:41.000000000 +0200
+++ 2.6.17-rc3-pciehp-init-recovery/drivers/pci/hotplug/pciehp_hpc.c 2006-04-28 09:20:55.000000000 +0200
@@ -1474,7 +1474,7 @@ int pcie_init(struct controller * ctrl,
rc = hp_register_read_word(pdev, SLOT_CTRL(ctrl->cap_base), temp_word);
if (rc) {
err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
- goto abort_free_ctlr;
+ goto abort_free_irq;
}
intr_enable = intr_enable | PRSN_DETECT_ENABLE;
@@ -1500,19 +1500,19 @@ int pcie_init(struct controller * ctrl,
rc = hp_register_write_word(pdev, SLOT_CTRL(ctrl->cap_base), temp_word);
if (rc) {
err("%s : hp_register_write_word SLOT_CTRL failed\n", __FUNCTION__);
- goto abort_free_ctlr;
+ goto abort_free_irq;
}
rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), slot_status);
if (rc) {
err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__);
- goto abort_free_ctlr;
+ goto abort_disable_intr;
}
temp_word = 0x1F; /* Clear all events */
rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), temp_word);
if (rc) {
err("%s : hp_register_write_word SLOT_STATUS failed\n", __FUNCTION__);
- goto abort_free_ctlr;
+ goto abort_disable_intr;
}
if (pciehp_force) {
@@ -1521,7 +1521,7 @@ int pcie_init(struct controller * ctrl,
} else {
rc = pciehp_get_hp_hw_control_from_firmware(ctrl->pci_dev);
if (rc)
- goto abort_free_ctlr;
+ goto abort_disable_intr;
}
/* Add this HPC instance into the HPC list */
@@ -1548,6 +1548,21 @@ int pcie_init(struct controller * ctrl,
return 0;
/* We end up here for the many possible ways to fail this API. */
+abort_disable_intr:
+ rc = hp_register_read_word(pdev, SLOT_CTRL(ctrl->cap_base), temp_word);
+ if (!rc) {
+ temp_word &= ~(intr_enable | HP_INTR_ENABLE);
+ rc = hp_register_write_word(pdev, SLOT_CTRL(ctrl->cap_base), temp_word);
+ }
+ if (rc)
+ err("%s : disabling interrupts failed\n", __FUNCTION__);
+
+abort_free_irq:
+ if (pciehp_poll_mode)
+ del_timer_sync(&php_ctlr->int_poll_timer);
+ else
+ free_irq(php_ctlr->irq, ctrl);
+
abort_free_ctlr:
pcie_cap_base = saved_cap_base;
kfree(php_ctlr);
next prev parent reply other threads:[~2006-05-02 10:31 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-04-28 14:59 [PATCH] correct pciehp init recovery Jan Beulich
2006-04-28 17:38 ` [Pcihpd-discuss] " Kristen Accardi
2006-05-02 10:32 ` Jan Beulich [this message]
2006-05-09 7:49 ` Andrew Morton
2006-05-09 8:29 ` Jan Beulich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44575154.76E4.0078.0@novell.com \
--to=jbeulich@novell.com \
--cc=kristen.c.accardi@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=pcihpd-discuss@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox