* ds.o: init_module: Operation not permitted (no socket drivers loaded)
@ 2006-05-27 5:30 George Nychis
2006-05-27 6:59 ` George Nychis
0 siblings, 1 reply; 3+ messages in thread
From: George Nychis @ 2006-05-27 5:30 UTC (permalink / raw)
To: lkml
Hey guys,
I have a prism card that I would like to get working with my 2.4.32
kernel. I installed pcmcia-cs and removed pcmcia support from the
kernel, i am not sure if this was the right decision, if not please tell me.
So after installing pcmcia_cs, i boot and modprobe pcmcia_core and
hostap, then i try to modprobe hostap_cs and i get:
[root@emu-5 hostap-driver-0.4.9]# modprobe hostap_cs
/lib/modules/2.4.32/pcmcia/ds.o: init_module: Operation not permitted
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
So of course I dmesg:
ds: no socket drivers loaded!
I can successfully get the card to work in my 2.6.9 kernel, here is my
lsmod... the only thing i see different is the yenta_socket which I am
not sure of:
[root@emu-5 ~]# lsmod
Module Size Used by
parport_pc 24705 1
lp 11565 0
parport 41737 2 parport_pc,lp
autofs4 24005 0
i2c_dev 10433 0
i2c_core 22081 1 i2c_dev
sunrpc 160421 1
hostap_cs 62656 3
hostap 117132 1 hostap_cs
ds 16965 3 hostap_cs
button 6481 0
battery 8517 0
ac 4805 0
md5 4033 1
ipv6 232577 10
yenta_socket 18753 1
pcmcia_core 59913 3 hostap_cs,ds,yenta_socket
uhci_hcd 31449 0
ehci_hcd 31557 0
snd_intel8x0 34829 0
snd_ac97_codec 64401 1 snd_intel8x0
snd_pcm_oss 47609 0
snd_mixer_oss 17217 1 snd_pcm_oss
snd_pcm 97993 2 snd_intel8x0,snd_pcm_oss
snd_timer 29765 1 snd_pcm
snd_page_alloc 9673 2 snd_intel8x0,snd_pcm
gameport 4801 1 snd_intel8x0
snd_mpu401_uart 8769 1 snd_intel8x0
snd_rawmidi 26725 1 snd_mpu401_uart
snd_seq_device 8137 1 snd_rawmidi
snd 54053 9
snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 9889 1 snd
tg3 85445 0
dm_snapshot 17029 0
dm_zero 2369 0
dm_mirror 23341 2
ext3 116809 2
jbd 74969 1 ext3
dm_mod 54741 6 dm_snapshot,dm_zero,dm_mirror
ata_piix 8389 2
libata 40005 1 ata_piix
sd_mod 16961 3
scsi_mod 118417 2 libata,sd_mod
I'd greatly appreciate any help!
Thanks!
George
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: ds.o: init_module: Operation not permitted (no socket drivers loaded)
2006-05-27 5:30 ds.o: init_module: Operation not permitted (no socket drivers loaded) George Nychis
@ 2006-05-27 6:59 ` George Nychis
2006-05-27 8:14 ` George Nychis
0 siblings, 1 reply; 3+ messages in thread
From: George Nychis @ 2006-05-27 6:59 UTC (permalink / raw)
To: George Nychis; +Cc: lkml
George Nychis wrote:
> Hey guys,
>
> I have a prism card that I would like to get working with my 2.4.32
> kernel. I installed pcmcia-cs and removed pcmcia support from the
> kernel, i am not sure if this was the right decision, if not please tell me.
>
> So after installing pcmcia_cs, i boot and modprobe pcmcia_core and
> hostap, then i try to modprobe hostap_cs and i get:
>
> [root@emu-5 hostap-driver-0.4.9]# modprobe hostap_cs
> /lib/modules/2.4.32/pcmcia/ds.o: init_module: Operation not permitted
> Hint: insmod errors can be caused by incorrect module parameters,
> including invalid IO or IRQ parameters.
> You may find more information in syslog or the output from dmesg
>
> So of course I dmesg:
> ds: no socket drivers loaded!
>
> I can successfully get the card to work in my 2.6.9 kernel, here is my
> lsmod... the only thing i see different is the yenta_socket which I am
> not sure of:
> [root@emu-5 ~]# lsmod
> Module Size Used by
> parport_pc 24705 1
> lp 11565 0
> parport 41737 2 parport_pc,lp
> autofs4 24005 0
> i2c_dev 10433 0
> i2c_core 22081 1 i2c_dev
> sunrpc 160421 1
> hostap_cs 62656 3
> hostap 117132 1 hostap_cs
> ds 16965 3 hostap_cs
> button 6481 0
> battery 8517 0
> ac 4805 0
> md5 4033 1
> ipv6 232577 10
> yenta_socket 18753 1
> pcmcia_core 59913 3 hostap_cs,ds,yenta_socket
> uhci_hcd 31449 0
> ehci_hcd 31557 0
> snd_intel8x0 34829 0
> snd_ac97_codec 64401 1 snd_intel8x0
> snd_pcm_oss 47609 0
> snd_mixer_oss 17217 1 snd_pcm_oss
> snd_pcm 97993 2 snd_intel8x0,snd_pcm_oss
> snd_timer 29765 1 snd_pcm
> snd_page_alloc 9673 2 snd_intel8x0,snd_pcm
> gameport 4801 1 snd_intel8x0
> snd_mpu401_uart 8769 1 snd_intel8x0
> snd_rawmidi 26725 1 snd_mpu401_uart
> snd_seq_device 8137 1 snd_rawmidi
> snd 54053 9
> snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
> soundcore 9889 1 snd
> tg3 85445 0
> dm_snapshot 17029 0
> dm_zero 2369 0
> dm_mirror 23341 2
> ext3 116809 2
> jbd 74969 1 ext3
> dm_mod 54741 6 dm_snapshot,dm_zero,dm_mirror
> ata_piix 8389 2
> libata 40005 1 ata_piix
> sd_mod 16961 3
> scsi_mod 118417 2 libata,sd_mod
>
>
> I'd greatly appreciate any help!
>
> Thanks!
> George
>
Alright i'm going to respond to my own post real quick... I built pcmcia
support into the kernel instead of using pcmcia-cs. I now get the power
light on the card light up. So then I modprobe hostap and hostap_cs
I see this in dmesg:
hostap_crypt: registered algorithm 'NULL'
hostap_cs: 0.4.9 - 2006-05-06 (Jouni Malinen <jkmaline@cc.hut.fi>)
It also seems to be recognizing a card:
[root@emu-5 pcmcia]# cardctl info
PRODID_1="INTERSIL"
PRODID_2="HFA384x/IEEE"
PRODID_3="Version 01.02"
PRODID_4=""
MANFID=0156,0002
FUNCID=6
However i see no wireless interfaces:
[root@emu-5 pcmcia]# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
[root@emu-5 pcmcia]# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:11:43:43:D0:11
inet addr:192.168.1.101 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:705 errors:0 dropped:0 overruns:0 frame:0
TX packets:454 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:65062 (63.5 KiB) TX bytes:81096 (79.1 KiB)
Interrupt:11
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:560 (560.0 b) TX bytes:560 (560.0 b)
Any ideas?
Thanks!
George
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: ds.o: init_module: Operation not permitted (no socket drivers loaded)
2006-05-27 6:59 ` George Nychis
@ 2006-05-27 8:14 ` George Nychis
0 siblings, 0 replies; 3+ messages in thread
From: George Nychis @ 2006-05-27 8:14 UTC (permalink / raw)
To: George Nychis; +Cc: lkml
My final response to myself, so no one wastes time trying to help me, I
got it working by building the regular pcmcia support as modules with
the 2.4.32 kernel, then using the latest hostap drivers, and rebooting.
George Nychis wrote:
>
> George Nychis wrote:
>> Hey guys,
>>
>> I have a prism card that I would like to get working with my 2.4.32
>> kernel. I installed pcmcia-cs and removed pcmcia support from the
>> kernel, i am not sure if this was the right decision, if not please tell me.
>>
>> So after installing pcmcia_cs, i boot and modprobe pcmcia_core and
>> hostap, then i try to modprobe hostap_cs and i get:
>>
>> [root@emu-5 hostap-driver-0.4.9]# modprobe hostap_cs
>> /lib/modules/2.4.32/pcmcia/ds.o: init_module: Operation not permitted
>> Hint: insmod errors can be caused by incorrect module parameters,
>> including invalid IO or IRQ parameters.
>> You may find more information in syslog or the output from dmesg
>>
>> So of course I dmesg:
>> ds: no socket drivers loaded!
>>
>> I can successfully get the card to work in my 2.6.9 kernel, here is my
>> lsmod... the only thing i see different is the yenta_socket which I am
>> not sure of:
>> [root@emu-5 ~]# lsmod
>> Module Size Used by
>> parport_pc 24705 1
>> lp 11565 0
>> parport 41737 2 parport_pc,lp
>> autofs4 24005 0
>> i2c_dev 10433 0
>> i2c_core 22081 1 i2c_dev
>> sunrpc 160421 1
>> hostap_cs 62656 3
>> hostap 117132 1 hostap_cs
>> ds 16965 3 hostap_cs
>> button 6481 0
>> battery 8517 0
>> ac 4805 0
>> md5 4033 1
>> ipv6 232577 10
>> yenta_socket 18753 1
>> pcmcia_core 59913 3 hostap_cs,ds,yenta_socket
>> uhci_hcd 31449 0
>> ehci_hcd 31557 0
>> snd_intel8x0 34829 0
>> snd_ac97_codec 64401 1 snd_intel8x0
>> snd_pcm_oss 47609 0
>> snd_mixer_oss 17217 1 snd_pcm_oss
>> snd_pcm 97993 2 snd_intel8x0,snd_pcm_oss
>> snd_timer 29765 1 snd_pcm
>> snd_page_alloc 9673 2 snd_intel8x0,snd_pcm
>> gameport 4801 1 snd_intel8x0
>> snd_mpu401_uart 8769 1 snd_intel8x0
>> snd_rawmidi 26725 1 snd_mpu401_uart
>> snd_seq_device 8137 1 snd_rawmidi
>> snd 54053 9
>> snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
>> soundcore 9889 1 snd
>> tg3 85445 0
>> dm_snapshot 17029 0
>> dm_zero 2369 0
>> dm_mirror 23341 2
>> ext3 116809 2
>> jbd 74969 1 ext3
>> dm_mod 54741 6 dm_snapshot,dm_zero,dm_mirror
>> ata_piix 8389 2
>> libata 40005 1 ata_piix
>> sd_mod 16961 3
>> scsi_mod 118417 2 libata,sd_mod
>>
>>
>> I'd greatly appreciate any help!
>>
>> Thanks!
>> George
>>
>
> Alright i'm going to respond to my own post real quick... I built pcmcia
> support into the kernel instead of using pcmcia-cs. I now get the power
> light on the card light up. So then I modprobe hostap and hostap_cs
>
> I see this in dmesg:
> hostap_crypt: registered algorithm 'NULL'
> hostap_cs: 0.4.9 - 2006-05-06 (Jouni Malinen <jkmaline@cc.hut.fi>)
>
> It also seems to be recognizing a card:
> [root@emu-5 pcmcia]# cardctl info
> PRODID_1="INTERSIL"
> PRODID_2="HFA384x/IEEE"
> PRODID_3="Version 01.02"
> PRODID_4=""
> MANFID=0156,0002
> FUNCID=6
>
> However i see no wireless interfaces:
> [root@emu-5 pcmcia]# iwconfig
> lo no wireless extensions.
>
> eth0 no wireless extensions.
>
> [root@emu-5 pcmcia]# ifconfig -a
> eth0 Link encap:Ethernet HWaddr 00:11:43:43:D0:11
> inet addr:192.168.1.101 Bcast:192.168.1.255 Mask:255.255.255.0
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:705 errors:0 dropped:0 overruns:0 frame:0
> TX packets:454 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:65062 (63.5 KiB) TX bytes:81096 (79.1 KiB)
> Interrupt:11
>
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> UP LOOPBACK RUNNING MTU:16436 Metric:1
> RX packets:8 errors:0 dropped:0 overruns:0 frame:0
> TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:560 (560.0 b) TX bytes:560 (560.0 b)
>
> Any ideas?
>
> Thanks!
> George
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2006-05-27 8:12 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-05-27 5:30 ds.o: init_module: Operation not permitted (no socket drivers loaded) George Nychis
2006-05-27 6:59 ` George Nychis
2006-05-27 8:14 ` George Nychis
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox