* Re: [OOPS] amrestore dies in kmem_cache_free 2.6.16.18 - cannot restore backups!
@ 2006-05-26 4:27 Chuck Ebbert
2006-05-27 15:22 ` Mike Christie
0 siblings, 1 reply; 8+ messages in thread
From: Chuck Ebbert @ 2006-05-26 4:27 UTC (permalink / raw)
To: James Lamanna; +Cc: linux-kernel, Pekka Enberg, James Bottomley, Mike Christie
In-Reply-To: <aa4c40ff0605231824j55c998c3oe427dec2404afba0@mail.gmail.com>
On Tue, 23 May 2006 18:24:14 -0700, James Lamanna wrote:
> So I was able to recreate this problem on a vanilla 2.6.16.18 with the
> following oops..
> I'd say this is a serious regression since I cannot restore backups
> anymore (I could with 2.6.14.x, but that kernel series had other
> issues...)
> Unable to handle kernel paging request at ffff82bc81000030 RIP: <ffffffff801657d9>{kmem_cache_free+82}
> PGD 0
> Oops: 0000 [1] SMP
> CPU 1
> Modules linked in:
> Pid: 5814, comm: amrestore Not tainted 2.6.16.18 #2
> RIP: 0010:[<ffffffff801657d9>] <ffffffff801657d9>{kmem_cache_free+82}
> RSP: 0018:ffff81007d4afcd8 EFLAGS: 00010086
> RAX: ffff82bc81000000 RBX: ffff81004119d800 RCX: 000000000000001e
> RDX: ffff81000000c000 RSI: 0000000000000000 RDI: 00000007f0000000
> RBP: ffff81007ff0c800 R08: 0000000000000000 R09: 0000000000000400
> R10: 0000000000000000 R11: ffffffff8014b3d6 R12: ffff810041311480
> R13: 0000000000000400 R14: 0000000000000400 R15: ffff81007e676748
> FS: 00002b7f39708020(0000) GS:ffff810041173bc0(0000) knlGS:0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> CR2: ffff82bc81000030 CR3: 000000007de09000 CR4: 00000000000006e0
> Process amrestore (pid: 5814, threadinfo ffff81007d4ae000, task ffff81007e2f8ae0)
> Stack: 0000000000000000 0000000000000246 ffff8100413c9bc0 ffff81007ff0c800
> ffff8100413c9bc0 ffffffff8016dfdc ffff8100413c9bc0 ffff81007fe25408
> 00000000ffffffea ffffffff803187e7
> Call Trace: <ffffffff8016dfdc>{bio_free+48} <ffffffff803187e7>{scsi_execute_async+640}
> <ffffffff8035d8d2>{st_do_scsi+422} <ffffffff8035d6e2>{st_sleep_done+0}
> <ffffffff80362950>{st_read+855} <ffffffff8013e1ca>{autoremove_wake_function+0}
> <ffffffff80169d7c>{vfs_read+171} <ffffffff8016a0af>{sys_read+69}
> <ffffffff8010a93e>{system_call+126}
>
> Code: 48 8b 48 30 0f b7 51 28 65 8b 04 25 30 00 00 00 39 c2 0f 84
> RIP <ffffffff801657d9>{kmem_cache_free+82} RSP <ffff81007d4afcd8>
> CR2: ffff82bc81000030
First of all, to really see what is happening you need to recompile your kernel
after adding some debug options:
Kernel Hacking --->
[*] Kernel debugging
[*] Debug memory allocations
[*] Compile the kernel with frame pointers
(Frame pointers won't give an exact trace but they'll prevent the tail merging
that makes it so hard to follow.)
Then reproduce the error and send the oops and any new error messages you see.
Don't send the whole boot log and .config again -- we have them already.
The bug is happening here, in __cache_free, in code that's only included
on NUMA machines:
static inline void __cache_free(struct kmem_cache *cachep, void *objp)
{
struct array_cache *ac = cpu_cache_get(cachep);
check_irq_off();
objp = cache_free_debugcheck(cachep, objp, __builtin_return_address(0));
/* Make sure we are not freeing a object from another
* node to the array cache on this cpu.
*/
#ifdef CONFIG_NUMA
{
struct slab *slabp;
slabp = virt_to_slab(objp); <==== OOPS
if (unlikely(slabp->nodeid != numa_node_id())) {
struct array_cache *alien = NULL;
int nodeid = slabp->nodeid;
Tracing through the nested inline functions, we have:
static inline struct slab *virt_to_slab(const void *obj)
{
struct page *page = virt_to_page(obj);
return page_get_slab(page); <==== OOPS
}
static inline struct slab *page_get_slab(struct page *page)
{
return (struct slab *)page->lru.prev; <==== OOPS
}
virt_to_page() returned a struct page * that pointed to unmapped memory.
This all came from scsi_execute_async, possibly through this path:
scsi_execute_async
scsi_rq_map_sg: some kind of error occurred?
bio_endio
bio->bi_end_io ==> scsi_bi_end_io
bio_put
bio->bi_destructor ==> bio_fs_destructor
bio_free
mempool_free
kmem_cache_free
scsi_execute_async and scsi_rq_map_sg were rewritten last December, so may have
new bugs.
--
Chuck
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [OOPS] amrestore dies in kmem_cache_free 2.6.16.18 - cannot restore backups!
2006-05-26 4:27 [OOPS] amrestore dies in kmem_cache_free 2.6.16.18 - cannot restore backups! Chuck Ebbert
@ 2006-05-27 15:22 ` Mike Christie
0 siblings, 0 replies; 8+ messages in thread
From: Mike Christie @ 2006-05-27 15:22 UTC (permalink / raw)
To: Chuck Ebbert; +Cc: James Lamanna, linux-kernel, Pekka Enberg, James Bottomley
Chuck Ebbert wrote:
> In-Reply-To: <aa4c40ff0605231824j55c998c3oe427dec2404afba0@mail.gmail.com>
>
> On Tue, 23 May 2006 18:24:14 -0700, James Lamanna wrote:
>
>> So I was able to recreate this problem on a vanilla 2.6.16.18 with the
>> following oops..
>> I'd say this is a serious regression since I cannot restore backups
>> anymore (I could with 2.6.14.x, but that kernel series had other
>> issues...)
>
>> Unable to handle kernel paging request at ffff82bc81000030 RIP: <ffffffff801657d9>{kmem_cache_free+82}
>> PGD 0
>> Oops: 0000 [1] SMP
>> CPU 1
>> Modules linked in:
>> Pid: 5814, comm: amrestore Not tainted 2.6.16.18 #2
>> RIP: 0010:[<ffffffff801657d9>] <ffffffff801657d9>{kmem_cache_free+82}
>> RSP: 0018:ffff81007d4afcd8 EFLAGS: 00010086
>> RAX: ffff82bc81000000 RBX: ffff81004119d800 RCX: 000000000000001e
>> RDX: ffff81000000c000 RSI: 0000000000000000 RDI: 00000007f0000000
>> RBP: ffff81007ff0c800 R08: 0000000000000000 R09: 0000000000000400
>> R10: 0000000000000000 R11: ffffffff8014b3d6 R12: ffff810041311480
>> R13: 0000000000000400 R14: 0000000000000400 R15: ffff81007e676748
>> FS: 00002b7f39708020(0000) GS:ffff810041173bc0(0000) knlGS:0000000000000000
>> CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
>> CR2: ffff82bc81000030 CR3: 000000007de09000 CR4: 00000000000006e0
>> Process amrestore (pid: 5814, threadinfo ffff81007d4ae000, task ffff81007e2f8ae0)
>> Stack: 0000000000000000 0000000000000246 ffff8100413c9bc0 ffff81007ff0c800
>> ffff8100413c9bc0 ffffffff8016dfdc ffff8100413c9bc0 ffff81007fe25408
>> 00000000ffffffea ffffffff803187e7
>> Call Trace: <ffffffff8016dfdc>{bio_free+48} <ffffffff803187e7>{scsi_execute_async+640}
>> <ffffffff8035d8d2>{st_do_scsi+422} <ffffffff8035d6e2>{st_sleep_done+0}
>> <ffffffff80362950>{st_read+855} <ffffffff8013e1ca>{autoremove_wake_function+0}
>> <ffffffff80169d7c>{vfs_read+171} <ffffffff8016a0af>{sys_read+69}
>> <ffffffff8010a93e>{system_call+126}
>>
>> Code: 48 8b 48 30 0f b7 51 28 65 8b 04 25 30 00 00 00 39 c2 0f 84
>> RIP <ffffffff801657d9>{kmem_cache_free+82} RSP <ffff81007d4afcd8>
>> CR2: ffff82bc81000030
>
> First of all, to really see what is happening you need to recompile your kernel
> after adding some debug options:
>
> Kernel Hacking --->
> [*] Kernel debugging
> [*] Debug memory allocations
> [*] Compile the kernel with frame pointers
>
> (Frame pointers won't give an exact trace but they'll prevent the tail merging
> that makes it so hard to follow.)
>
> Then reproduce the error and send the oops and any new error messages you see.
> Don't send the whole boot log and .config again -- we have them already.
>
> The bug is happening here, in __cache_free, in code that's only included
> on NUMA machines:
>
> static inline void __cache_free(struct kmem_cache *cachep, void *objp)
> {
> struct array_cache *ac = cpu_cache_get(cachep);
>
> check_irq_off();
> objp = cache_free_debugcheck(cachep, objp, __builtin_return_address(0));
>
> /* Make sure we are not freeing a object from another
> * node to the array cache on this cpu.
> */
> #ifdef CONFIG_NUMA
> {
> struct slab *slabp;
> slabp = virt_to_slab(objp); <==== OOPS
> if (unlikely(slabp->nodeid != numa_node_id())) {
> struct array_cache *alien = NULL;
> int nodeid = slabp->nodeid;
>
>
> Tracing through the nested inline functions, we have:
>
> static inline struct slab *virt_to_slab(const void *obj)
> {
> struct page *page = virt_to_page(obj);
> return page_get_slab(page); <==== OOPS
> }
>
> static inline struct slab *page_get_slab(struct page *page)
> {
> return (struct slab *)page->lru.prev; <==== OOPS
> }
>
>
> virt_to_page() returned a struct page * that pointed to unmapped memory.
>
>
> This all came from scsi_execute_async, possibly through this path:
>
> scsi_execute_async
> scsi_rq_map_sg: some kind of error occurred?
> bio_endio
> bio->bi_end_io ==> scsi_bi_end_io
> bio_put
> bio->bi_destructor ==> bio_fs_destructor
> bio_free
> mempool_free
> kmem_cache_free
>
> scsi_execute_async and scsi_rq_map_sg were rewritten last December, so may have
> new bugs.
>
>
Sorry for the late reply. I have been traveling.
Maybe I messed up on the bounce code usage. Are you using st's direct IO
feature?
^ permalink raw reply [flat|nested] 8+ messages in thread
* [OOPS] amrestore dies in kmem_cache_free 2.6.16.18 - cannot restore backups!
@ 2006-05-24 1:24 James Lamanna
2006-05-24 7:38 ` Pekka Enberg
2006-05-25 20:02 ` Kai Makisara
0 siblings, 2 replies; 8+ messages in thread
From: James Lamanna @ 2006-05-24 1:24 UTC (permalink / raw)
To: linux-kernel
So I was able to recreate this problem on a vanilla 2.6.16.18 with the
following oops..
I'd say this is a serious regression since I cannot restore backups
anymore (I could with 2.6.14.x, but that kernel series had other
issues...)
amrestore does manage to read 1 32k block from tape before dying.
Any help would be greatly appreciated.
-- James Lamanna
Unable to handle kernel paging request at ffff82bc81000030 RIP:
<ffffffff801657d9>{kmem_cache_free+82}
PGD 0
Oops: 0000 [1] SMP
CPU 1
Modules linked in:
Pid: 5814, comm: amrestore Not tainted 2.6.16.18 #2
RIP: 0010:[<ffffffff801657d9>] <ffffffff801657d9>{kmem_cache_free+82}
RSP: 0018:ffff81007d4afcd8 EFLAGS: 00010086
RAX: ffff82bc81000000 RBX: ffff81004119d800 RCX: 000000000000001e
RDX: ffff81000000c000 RSI: 0000000000000000 RDI: 00000007f0000000
RBP: ffff81007ff0c800 R08: 0000000000000000 R09: 0000000000000400
R10: 0000000000000000 R11: ffffffff8014b3d6 R12: ffff810041311480
R13: 0000000000000400 R14: 0000000000000400 R15: ffff81007e676748
FS: 00002b7f39708020(0000) GS:ffff810041173bc0(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffff82bc81000030 CR3: 000000007de09000 CR4: 00000000000006e0
Process amrestore (pid: 5814, threadinfo ffff81007d4ae000, task
ffff81007e2f8ae0)
Stack: 0000000000000000 0000000000000246 ffff8100413c9bc0 ffff81007ff0c800
ffff8100413c9bc0 ffffffff8016dfdc ffff8100413c9bc0 ffff81007fe25408
00000000ffffffea ffffffff803187e7
Call Trace: <ffffffff8016dfdc>{bio_free+48}
<ffffffff803187e7>{scsi_execute_async+640}
<ffffffff8035d8d2>{st_do_scsi+422} <ffffffff8035d6e2>{st_sleep_done+0}
<ffffffff80362950>{st_read+855}
<ffffffff8013e1ca>{autoremove_wake_function+0}
<ffffffff80169d7c>{vfs_read+171} <ffffffff8016a0af>{sys_read+69}
<ffffffff8010a93e>{system_call+126}
Code: 48 8b 48 30 0f b7 51 28 65 8b 04 25 30 00 00 00 39 c2 0f 84
RIP <ffffffff801657d9>{kmem_cache_free+82} RSP <ffff81007d4afcd8>
CR2: ffff82bc81000030
dmesg:
Bootdata ok (command line is root=/dev/sda3
netconsole=@10.20.2.30/eth1,10001@10.20.2.15/)
Linux version 2.6.16.18 (root@fs0) (gcc version 3.4.3 20041125 (Gentoo
3.4.3-r1, ssp-3.4.3-0, pie-8.7.7)) #2 SMP Tue May 23 18:12:01 PDT 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000099000 (usable)
BIOS-e820: 0000000000099000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000c2000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007ff20000 (usable)
BIOS-e820: 000000007ff20000 - 000000007ff2f000 (ACPI data)
BIOS-e820: 000000007ff2f000 - 000000007ff80000 (ACPI NVS)
BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
ACPI: RSDP (v000 PTLTD ) @ 0x00000000000f6f80
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @
0x000000007ff2af87
ACPI: FADT (v001 NVIDIA CK8S 0x06040000 PTL_ 0x000f4240) @
0x000000007ff2ec9e
ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @
0x000000007ff2ed12
ACPI: SRAT (v001 AMD HAMMER 0x06040000 AMD 0x00000001) @
0x000000007ff2ee9a
ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @
0x000000007ff2ef62
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @
0x000000007ff2efd8
ACPI: DSDT (v001 NVIDIA CK8 0x06040000 MSFT 0x0100000e) @
0x0000000000000000
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 1 -> APIC 1 -> Node 1
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 0-40000000
SRAT: Node 1 PXM 1 40000000-80000000
NUMA: Using 30 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000040000000
Bootmem setup node 1 0000000040000000-000000007ff20000
On node 0 totalpages: 257138
DMA zone: 2618 pages, LIFO batch:0
DMA32 zone: 254520 pages, LIFO batch:31
Normal zone: 0 pages, LIFO batch:0
HighMem zone: 0 pages, LIFO batch:0
On node 1 totalpages: 258340
DMA zone: 0 pages, LIFO batch:0
DMA32 zone: 258340 pages, LIFO batch:31
Normal zone: 0 pages, LIFO batch:0
HighMem zone: 0 pages, LIFO batch:0
Nvidia board detected. Ignoring ACPI timer override.
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:5 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:5 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xdf200000] gsi_base[24])
IOAPIC[1]: apic_id 3, version 17, address 0xdf200000, GSI 24-27
ACPI: IOAPIC (id[0x04] address[0xdf201000] gsi_base[28])
IOAPIC[2]: apic_id 4, version 17, address 0xdf201000, GSI 28-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ9 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
Checking aperture...
CPU 0: aperture @ 0 size 32 MB
No AGP bridge found
Built 2 zonelists
Kernel command line: root=/dev/sda3
netconsole=@10.20.2.30/eth1,10001@10.20.2.15/
netconsole: local port 6665
netconsole: local IP 10.20.2.30
netconsole: interface eth1
netconsole: remote port 10001
netconsole: remote IP 10.20.2.15
netconsole: remote ethernet address ff:ff:ff:ff:ff:ff
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
Disabling vsyscall due to use of PM timer
time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
time.c: Detected 2009.275 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Memory: 2058556k/2096256k available (3359k kernel code, 37288k
reserved, 1256k data, 228k init)
Calibrating delay using timer specific routine.. 4025.03 BogoMIPS (lpj=8050070)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0(1) -> Node 0 -> Core 0
Using local APIC timer interrupts.
result 12557984
Detected 12.557 MHz APIC timer.
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 4018.81 BogoMIPS (lpj=8037638)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1(1) -> Node 1 -> Core 0
AMD Opteron(tm) Processor 246 stepping 0a
CPU 1: Syncing TSC to CPU 0.
CPU 1: synchronized TSC with CPU 0 (last diff -9 cycles, maxerr 1085 cycles)
Brought up 2 CPUs
testing NMI watchdog ... OK.
migration_cost=566
DMI present.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Boot video device is 0000:01:06.0
PCI: Transparent bridge - 0000:00:09.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19) *0
ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19) *0
ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19) *0
ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19) *0
ACPI: PCI Interrupt Link [LNK5] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [LSI1] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Root Bridge [PCI2] (0000:08)
PCI: Probing PCI hardware (bus 08)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.G0PA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.G0PB._PRT]
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI-DMA: Disabling IOMMU.
PCI: Bridge: 0000:00:09.0
IO window: 2000-2fff
MEM window: dd100000-deffffff
PREFETCH window: 88000000-880fffff
PCI: Bridge: 0000:00:0d.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0e.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
PCI: Failed to allocate mem resource #6:100000@e0000000 for 0000:09:02.0
PCI: Failed to allocate mem resource #6:100000@e0000000 for 0000:09:02.1
PCI: Bridge: 0000:08:0a.0
IO window: 3000-3fff
MEM window: df300000-df3fffff
PREFETCH window: df800000-dfffffff
PCI: Bridge: 0000:08:0b.0
IO window: 4000-4fff
MEM window: df400000-df4fffff
PREFETCH window: 88100000-881fffff
Simple Boot Flag at 0x36 set to 0x1
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
SGI XFS with ACLs, security attributes, large block/inode numbers, no
debug enabled
SGI XFS Quota Management subsystem
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
PCI: MSI quirk detected. pci_msi_quirk set.
PCI: MSI quirk detected. pci_msi_quirk set.
PCI: Setting latency timer of device 0000:00:0d.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
PCI: MSI quirk detected. MSI disabled.
Allocate Port Service[0000:00:0d.0:pcie00]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
isa bounce pool size: 16 pages
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 19
GSI 16 sharing vector 0xB1 and IRQ 16
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNK3] -> GSI 19 (level,
high) -> IRQ 177
e100: eth0: e100_probe: addr 0xdd101000, irq 177, MAC addr 00:E0:81:30:33:CE
tg3.c:v3.49 (Feb 2, 2006)
GSI 17 sharing vector 0xB9 and IRQ 17
ACPI: PCI Interrupt 0000:0a:09.0[A] -> GSI 28 (level, low) -> IRQ 185
eth1: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)]
(PCI:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:30:d7:f8
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[763f0000] dma_mask[64-bit]
GSI 18 sharing vector 0xC1 and IRQ 18
ACPI: PCI Interrupt 0000:0a:09.1[B] -> GSI 29 (level, low) -> IRQ 193
eth2: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)]
(PCI:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:30:d7:f9
eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth2: dma_rwctrl[763f0000] dma_mask[64-bit]
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
netconsole: device eth1 not up yet, forcing it
tg3: eth1: Link is up at 1000 Mbps, full duplex.
tg3: eth1: Flow control is off for TX and off for RX.
netconsole: network logging started
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 162
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0x1400-0x1407, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1408-0x140f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: SONY CD-ROM CDU5225, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
hda: ATAPI 52X CD-ROM drive, 96kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
GSI 19 sharing vector 0xC9 and IRQ 19
ACPI: PCI Interrupt 0000:0a:03.0[A] -> GSI 30 (level, low) -> IRQ 201
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
<Adaptec 3960D Ultra160 SCSI adapter>
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
Vendor: DELL Model: PV-132T Rev: 308D
Type: Medium Changer ANSI SCSI revision: 02
target0:0:0: Beginning Domain Validation
target0:0:0: Ending Domain Validation
Vendor: IBM Model: ULTRIUM-TD2 Rev: 53Y3
Type: Sequential-Access ANSI SCSI revision: 03
target0:0:1: Beginning Domain Validation
target0:0:1: wide asynchronous
target0:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
target0:0:1: Ending Domain Validation
GSI 20 sharing vector 0xD1 and IRQ 20
ACPI: PCI Interrupt 0000:0a:03.1[B] -> GSI 31 (level, low) -> IRQ 209
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
<Adaptec 3960D Ultra160 SCSI adapter>
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
3ware Storage Controller device driver for Linux v1.26.02.001.
3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
GSI 21 sharing vector 0xD9 and IRQ 21
ACPI: PCI Interrupt 0000:09:03.0[A] -> GSI 27 (level, low) -> IRQ 217
scsi2 : 3ware 9000 Storage Controller
3w-9xxx: scsi2: Found a 3ware 9000 Storage Controller at 0xdf340000, IRQ: 217.
3w-9xxx: scsi2: Firmware FE9X 2.06.00.009, BIOS BE9X 2.03.01.051, Ports: 8.
Vendor: AMCC Model: 9500S-8 DISK Rev: 2.06
Type: Direct-Access ANSI SCSI revision: 03
libata version 1.20 loaded.
st: Version 20050830, fixed bufsize 32768, s/g segs 256
st 0:0:1:0: Attached scsi tape st0<4>st0: try direct i/o: yes (alignment 512 B)
SCSI device sda: 1757749248 512-byte hdwr sectors (899968 MB)
sda: Write Protect is off
sda: Mode Sense: 23 00 00 00
SCSI device sda: drive cache: write back, no read (daft)
SCSI device sda: 1757749248 512-byte hdwr sectors (899968 MB)
sda: Write Protect is off
sda: Mode Sense: 23 00 00 00
SCSI device sda: drive cache: write back, no read (daft)
sda: sda1 sda2 sda3 sda4 < sda5 >
sd 2:0:0:0: Attached scsi disk sda
0:0:0:0: Attached scsi generic sg0 type 8
st 0:0:1:0: Attached scsi generic sg1 type 1
sd 2:0:0:0: Attached scsi generic sg2 type 0
SCSI Media Changer driver v0.25
ch0: type #1 (mt): 0x1+1 [medium transport]
ch0: type #2 (st): 0x1000+23 [storage]
ch0: type #3 (ie): 0x10+1 [import/export]
ch0: type #4 (dt): 0x100+1 [data transfer]
ch0: dt 0x100: ID 1, LUN 0, name: IBM ULTRIUM-TD2 53Y3
ch0: INITIALIZE ELEMENT STATUS, may take some time ...
ch0: ... finished
ch 0:0:0:0: Attached scsi changer ch0
Fusion MPT base driver 3.03.07
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT FC Host driver 3.03.07
GSI 22 sharing vector 0xE1 and IRQ 22
ACPI: PCI Interrupt 0000:09:02.0[A] -> GSI 26 (level, low) -> IRQ 225
mptbase: Initiating ioc0 bringup
ioc0: FC929XL: Capabilities={Initiator,Target,LAN}
scsi3 : ioc0: LSIFC929XL, FwRev=01020b00h, Ports=1, MaxQ=1023, IRQ=225
ACPI: PCI Interrupt 0000:09:02.1[B] -> GSI 27 (level, low) -> IRQ 217
mptbase: Initiating ioc1 bringup
ioc1: FC929XL: Capabilities={Initiator,Target,LAN}
Vendor: APPLE Model: Xse<6>scsi4 : ioc1: LSIFC929XL,
FwRev=01020b00h, Ports=1, MaxQ=1023, IRQ=217
rve RAID Rev: 1.50
Type: Direct-Access ANSI SCSI revision:
05<5>usbmon: debugfs is not available
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 23
GSI 23 sharing vector 0xE9 and IRQ 23
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 23 (level,
high) -> IRQ 233
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: irq 233, io mem 0xdd001000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Vendor: AP<6>usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
PLE Model: Xserve RAID Rev: 1.50
Type: Direct-Access ANSI SCSI revision: 05
sdb : very big device. try to use READ CAPACITY(16).
sdc : very big device. try to use READ CAPACITY(16).
SCSI device sdb: 5860573184 512-byte hdwr sectors (3000613 MB)
SCSI device sdc: 5860573184 512-byte hdwr sectors (3000613 MB)
sdb: Write Protect is off
sdb: Mode Sense: ad 00 00 08
sdc: Write Protect is off
sdc: Mode Sense: ad 00 00 08
SCSI device sdb: drive cache: write back
SCSI device sdc: drive cache: write back
sdb : very big device. try to use READ CAPACITY(16).
sdc : very big device. try to use READ CAPACITY(16).
SCSI device sdb: 5860573184 512-byte hdwr sectors (3000613 MB)
SCSI device sdc: 5860573184 512-byte hdwr sectors (3000613 MB)
sdb: Write Protect is off
sdb: Mode Sense: ad 00 00 08
sdc: Write Protect is off
sdc: Mode Sense: ad 00 00 08
SCSI device sdb: drive cache: write back
sdb:<5>SCSI device sdc: drive cache: write back
sdc: unknown partition table
sd 3:0:0:0: Attached scsi disk sdb
unknown partition table
sd 4:0:0:0: Attached scsi disk sdc
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 4:0:0:0: Attached scsi generic sg4 type 0
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
GSI 24 sharing vector 0x32 and IRQ 24
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 22 (level,
high) -> IRQ 50
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 50, io mem 0xdd000000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
USB Universal Host Controller Interface driver v2.3
usb 2-3: new low speed USB device using ohci_hcd and address 2
usb 2-3: configuration #1 chosen from 1 choice
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
input: BTC USB Multimedia Keyboard as /class/input/input0
input: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on
usb-0000:00:02.0-3
input: BTC USB Multimedia Keyboard as /class/input/input1
input: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:02.0-3
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: automatically using best checksumming function: generic_sse
generic_sse: 6155.000 MB/sec
raid5: using function: generic_sse (6155.000 MB/sec)
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.60.0)
powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x2 (1500 mV)
powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x6 (1400 mV)
powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0xe (1200 mV)
cpu_init done, current fid 0xc, vid 0x2
powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x2 (1500 mV)
powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x6 (1400 mV)
powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0xe (1200 mV)
cpu_init done, current fid 0xc, vid 0x2
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
ReiserFS: sda3: found reiserfs format "3.6" with standard journal
input: AT Translated Set 2 keyboard as /class/input/input2
ReiserFS: sda3: using ordered data mode
ReiserFS: sda3: journal params: device sda3, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: sda3: checking transaction log (sda3)
ReiserFS: sda3: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 228k freed
Adding 3911816k swap on /dev/sda2. Priority:-1 extents:1 across:3911816k
md: md0 stopped.
md: md0 stopped.
md: bind<sdc>
md: bind<sdb>
md0: setting max_sectors to 128, segment boundary to 32767
raid0: looking at sdb
raid0: comparing sdb(2930286528) with sdb(2930286528)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at sdc
raid0: comparing sdc(2930286528) with sdb(2930286528)
raid0: EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 5860573056 blocks.
raid0 : conf->hash_spacing is 5860573056 blocks.
raid0 : nb_zone is 2.
raid0 : Allocating 16 bytes for hash.
XFS: osyncisdsync is now the default, option is deprecated.
XFS mounting filesystem dm-1
Ending clean XFS mount for filesystem: dm-1
XFS: osyncisdsync is now the default, option is deprecated.
XFS mounting filesystem dm-0
Ending clean XFS mount for filesystem: dm-0
XFS: osyncisdsync is now the default, option is deprecated.
XFS mounting filesystem md0
Ending clean XFS mount for filesystem: md0
eth1: no IPv6 routers present
st0: Block limits 1 - 16777215 bytes.
.config:
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.16.18
# Tue May 23 18:09:27 2006
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_UID16=y
CONFIG_VM86=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
CONFIG_STOP_MACHINE=y
#
# Block layer
#
CONFIG_LBD=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VSMP is not set
CONFIG_MK8=y
# CONFIG_MPSC is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
CONFIG_SMP=y
CONFIG_SCHED_SMT=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_BKL=y
CONFIG_NUMA=y
CONFIG_K8_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
# CONFIG_NUMA_EMU is not set
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_DISCONTIGMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_NR_CPUS=32
# CONFIG_HOTPLUG_CPU is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_GART_IOMMU=y
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x100000
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
CONFIG_GENERIC_PENDING_IRQ=y
#
# Power management options
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
# CONFIG_ACPI_HOTKEY is not set
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
CONFIG_ACPI_TOSHIBA=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_POWERNOW_K8_ACPI=y
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_ACPI_CPUFREQ=y
#
# shared options
#
CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y
# CONFIG_X86_SPEEDSTEP_LIB is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_UNORDERED_IO is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY_PROC is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
CONFIG_BLK_DEV_PDC202XX_NEW=y
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=y
CONFIG_SCSI_3W_9XXX=y
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=4000
# CONFIG_AIC79XX_ENABLE_RD_STRM is not set
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
CONFIG_SCSI_ATA_PIIX=y
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
# CONFIG_SCSI_SATA_SIL24 is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
CONFIG_SCSI_SATA_VIA=y
# CONFIG_SCSI_SATA_VITESSE is not set
CONFIG_SCSI_SATA_INTEL_COMBINED=y
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID5=y
# CONFIG_MD_RAID6 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
#
# Fusion MPT device support
#
CONFIG_FUSION=y
# CONFIG_FUSION_SPI is not set
CONFIG_FUSION_FC=y
# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LAN is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
CONFIG_S2IO=m
# CONFIG_S2IO_NAPI is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_NET_FC=y
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
CONFIG_VIDEO_SELECT=y
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
# CONFIG_EDAC is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
# CONFIG_REISERFS_FS_SECURITY is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
CONFIG_XFS_EXPORT=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=y
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=15
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
lspci -vvv:
00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
Subsystem: Tyan Computer Unknown device 2892
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [44] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC-
TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut-
LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+
TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut-
LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
Revision ID: 1.03
Link Frequency 0: 800MHz
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+
500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz-
500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE-
CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [e0] HyperTransport: MSI Mapping
00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3)
Subsystem: Tyan Computer Unknown device 2892
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: I/O ports at 8c00 [size=128]
00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
Subsystem: Tyan Computer Unknown device 2892
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 0
Region 0: I/O ports at 1000 [size=32]
Region 4: I/O ports at 5000 [size=64]
Region 5: I/O ports at 5040 [size=64]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev
a2) (prog-if 10 [OHCI])
Subsystem: Tyan Computer Unknown device 2892
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 50
Region 0: Memory at dd000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev
a3) (prog-if 20 [EHCI])
Subsystem: Tyan Computer Unknown device 2892
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 233
Region 0: Memory at dd001000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a2) (prog-if
8a [Master SecP PriP])
Subsystem: Tyan Computer Unknown device 2892
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Region 4: I/O ports at 1400 [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller
(rev a3) (prog-if 85 [Master SecO PriO])
Subsystem: Tyan Computer Unknown device 2892
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 1440 [size=8]
Region 1: I/O ports at 1434 [size=4]
Region 2: I/O ports at 1438 [size=8]
Region 3: I/O ports at 1430 [size=4]
Region 4: I/O ports at 1410 [size=16]
Region 5: Memory at dd002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller
(rev a3) (prog-if 85 [Master SecO PriO])
Subsystem: Tyan Computer Unknown device 2892
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 1458 [size=8]
Region 1: I/O ports at 144c [size=4]
Region 2: I/O ports at 1450 [size=8]
Region 3: I/O ports at 1448 [size=4]
Region 4: I/O ports at 1420 [size=16]
Region 5: Memory at dd003000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2)
(prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00002000-00002fff
Memory behind bridge: dd100000-deffffff
Prefetchable memory behind bridge: 88000000-880fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size 10
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: 64bit+
Queue=0/1 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [58] HyperTransport: MSI Mapping
Capabilities: [80] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <512ns, L1 <4us
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 1
Link: Latency L0s <512ns, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
Slot: Number 2, PowerLimit 25.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Off, PwrInd On, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size 10
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: 64bit+
Queue=0/1 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [58] HyperTransport: MSI Mapping
Capabilities: [80] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <512ns, L1 <4us
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s, Port 0
Link: Latency L0s <512ns, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x16
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
Slot: Number 1, PowerLimit 75.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Off, PwrInd On, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Capabilities: [80] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
Capabilities: [a0] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
Capabilities: [c0] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00:19.0 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Capabilities: [80] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=N/C LWO=N/C
Revision ID: 1.02
Capabilities: [a0] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
Capabilities: [c0] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=N/C LWO=N/C
Revision ID: 1.02
00:19.1 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00:19.2 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00:19.3 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
01:06.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev
27) (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc Rage XL
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 66 (2000ns min), Cache Line Size 10
Interrupt: pin A routed to IRQ 10
Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at 2000 [size=256]
Region 2: Memory at dd100000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 88000000 [disabled] [size=128K]
Capabilities: [5c] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:08.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro
100] (rev 10)
Subsystem: Intel Corporation EtherExpress PRO/100 S Server Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 66 (2000ns min, 14000ns max), Cache Line Size 10
Interrupt: pin A routed to IRQ 177
Region 0: Memory at dd101000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 2400 [size=64]
Region 2: Memory at dd120000 (32-bit, non-prefetchable) [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
08:0a.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge
(rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=08, secondary=09, subordinate=09, sec-latency=96
I/O behind bridge: 00003000-00003fff
Memory behind bridge: df300000-df3fffff
Prefetchable memory behind bridge: 00000000df800000-00000000dff00000
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [a0] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv
Status: Dev=08:0a.0 64bit+ 133MHz+ SCD- USC- SCO- SRD-
Upstream: Capacity=14 CommitmentLimit=65535
Downstream: Capacity=2 CommitmentLimit=65535
Capabilities: [b8] HyperTransport: Interrupt Discovery and Configuration
Capabilities: [c0] HyperTransport: Slave or Primary Interface
!!! Possibly incomplete decoding
Command: BaseUnitID=10 UnitCnt=2 MastHost- DefDir-
Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC-
TXO- <CRCErr=0
Link Config 0: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+
TXO+ <CRCErr=0
Link Config 1: MLWI=8bit MLWO=8bit LWI=N/C LWO=N/C
Revision ID: 1.02
08:0a.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev
01) (prog-if 10 [IO-APIC])
Subsystem: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at df200000 (64-bit, non-prefetchable) [size=4K]
08:0b.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge
(rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=08, secondary=0a, subordinate=0a, sec-latency=96
I/O behind bridge: 00004000-00004fff
Memory behind bridge: df400000-df4fffff
Prefetchable memory behind bridge: 0000000088100000-0000000088100000
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [a0] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv
Status: Dev=08:0b.0 64bit+ 133MHz+ SCD- USC- SCO- SRD-
Upstream: Capacity=14 CommitmentLimit=65535
Downstream: Capacity=2 CommitmentLimit=65535
Capabilities: [b8] HyperTransport: Interrupt Discovery and Configuration
08:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev
01) (prog-if 10 [IO-APIC])
Subsystem: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at df201000 (64-bit, non-prefetchable) [size=4K]
09:02.0 Fibre Channel: LSI Logic / Symbios Logic FC929X Fibre Channel
Adapter (rev 81)
Subsystem: LSI Logic / Symbios Logic Unknown device 10d0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 72 (16000ns min, 2500ns max), Cache Line Size 10
Interrupt: pin A routed to IRQ 225
Region 0: I/O ports at 3000 [size=256]
Region 1: Memory at df310000 (64-bit, non-prefetchable) [size=64K]
Region 3: Memory at df300000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [68] PCI-X non-bridge device
Command: DPERE- ERO- RBC=2048 OST=8
Status: Dev=ff:1f.0 64bit+ 133MHz+ SCD- USC- DC=simple
DMMRBC=2048 DMOST=8 DMCRS=64 RSCEM- 266MHz- 533MHz-
09:02.1 Fibre Channel: LSI Logic / Symbios Logic FC929X Fibre Channel
Adapter (rev 81)
Subsystem: LSI Logic / Symbios Logic Unknown device 10d0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 72 (16000ns min, 2500ns max), Cache Line Size 10
Interrupt: pin B routed to IRQ 217
Region 0: I/O ports at 3400 [size=256]
Region 1: Memory at df330000 (64-bit, non-prefetchable) [size=64K]
Region 3: Memory at df320000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [68] PCI-X non-bridge device
Command: DPERE- ERO- RBC=2048 OST=8
Status: Dev=ff:1f.1 64bit+ 133MHz+ SCD- USC- DC=simple
DMMRBC=2048 DMOST=8 DMCRS=64 RSCEM- 266MHz- 533MHz-
09:03.0 RAID bus controller: 3ware Inc 9xxx-series SATA-RAID
Subsystem: 3ware Inc 9xxx-series SATA-RAID
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 72 (2250ns min), Cache Line Size 10
Interrupt: pin A routed to IRQ 217
Region 0: I/O ports at 3800 [size=256]
Region 1: Memory at df340000 (64-bit, non-prefetchable) [size=256]
Region 3: Memory at df800000 (64-bit, prefetchable) [size=8M]
[virtual] Expansion ROM at df350000 [disabled] [size=64K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0+,D1+,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0a:03.0 SCSI storage controller: Adaptec AHA-3960D / AIC-7899A U160/m (rev 01)
Subsystem: Adaptec AHA-3960D U160/m
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 72 (10000ns min, 6250ns max), Cache Line Size 10
Interrupt: pin A routed to IRQ 201
BIST result: 00
Region 0: I/O ports at 4000 [disabled] [size=256]
Region 1: Memory at df400000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 88100000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0a:03.1 SCSI storage controller: Adaptec AHA-3960D / AIC-7899A U160/m (rev 01)
Subsystem: Adaptec AHA-3960D U160/m
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 72 (10000ns min, 6250ns max), Cache Line Size 10
Interrupt: pin B routed to IRQ 209
BIST result: 00
Region 0: I/O ports at 4400 [disabled] [size=256]
Region 1: Memory at df401000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 88120000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0a:09.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704
Gigabit Ethernet (rev 03)
Subsystem: Broadcom Corporation Unknown device 1644
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (16000ns min), Cache Line Size 10
Interrupt: pin A routed to IRQ 185
Region 0: Memory at df420000 (64-bit, non-prefetchable) [size=64K]
Region 2: Memory at df410000 (64-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at 88140000 [disabled] [size=64K]
Capabilities: [40] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=1
Status: Dev=ff:1f.0 64bit+ 133MHz+ SCD- USC- DC=simple
DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+
Queue=0/3 Enable-
Address: 1a72e12521540314 Data: 0128
0a:09.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704
Gigabit Ethernet (rev 03)
Subsystem: Broadcom Corporation Unknown device 1644
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (16000ns min), Cache Line Size 10
Interrupt: pin B routed to IRQ 193
Region 0: Memory at df440000 (64-bit, non-prefetchable) [size=64K]
Region 2: Memory at df430000 (64-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at 88150000 [disabled] [size=64K]
Capabilities: [40] PCI-X non-bridge device
Command: DPERE- ERO+ RBC=2048 OST=1
Status: Dev=ff:1f.1 64bit+ 133MHz+ SCD- USC- DC=simple
DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+
Queue=0/3 Enable-
Address: 2000274248c02928 Data: 0006
/proc/cpuinfo:
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 5
model name : AMD Opteron(tm) Processor 246
stepping : 10
cpu MHz : 2000.000
cache size : 1024 KB
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext lm
3dnowext 3dnow
bogomips : 4025.03
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp
processor : 1
vendor_id : AuthenticAMD
cpu family : 15
model : 5
model name : AMD Opteron(tm) Processor 246
stepping : 10
cpu MHz : 2000.000
cache size : 1024 KB
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext lm
3dnowext 3dnow
bogomips : 4018.81
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [OOPS] amrestore dies in kmem_cache_free 2.6.16.18 - cannot restore backups!
2006-05-24 1:24 James Lamanna
@ 2006-05-24 7:38 ` Pekka Enberg
2006-05-25 20:02 ` Kai Makisara
1 sibling, 0 replies; 8+ messages in thread
From: Pekka Enberg @ 2006-05-24 7:38 UTC (permalink / raw)
To: James Lamanna; +Cc: linux-kernel
On 5/24/06, James Lamanna <jlamanna@gmail.com> wrote:
> So I was able to recreate this problem on a vanilla 2.6.16.18 with the
> following oops..
> I'd say this is a serious regression since I cannot restore backups
> anymore (I could with 2.6.14.x, but that kernel series had other
> issues...)
>
> amrestore does manage to read 1 32k block from tape before dying.
>
> Any help would be greatly appreciated.
You could try with CONFIG_DEBUG_SLAB enabled to see if it catches anything.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [OOPS] amrestore dies in kmem_cache_free 2.6.16.18 - cannot restore backups!
2006-05-24 1:24 James Lamanna
2006-05-24 7:38 ` Pekka Enberg
@ 2006-05-25 20:02 ` Kai Makisara
2006-05-27 9:34 ` Kai Makisara
1 sibling, 1 reply; 8+ messages in thread
From: Kai Makisara @ 2006-05-25 20:02 UTC (permalink / raw)
To: James Lamanna; +Cc: linux-kernel, linux-scsi
I am adding linux-scsi to recipients (and quoting the whole message for
readers of that list).
On Tue, 23 May 2006, James Lamanna wrote:
> So I was able to recreate this problem on a vanilla 2.6.16.18 with the
> following oops..
> I'd say this is a serious regression since I cannot restore backups
> anymore (I could with 2.6.14.x, but that kernel series had other
> issues...)
>
> amrestore does manage to read 1 32k block from tape before dying.
>
> Any help would be greatly appreciated.
>
I have tried 'amrestore' on my machine with 2.6.16.18 but was not able to
reproduce the problem. However, there are many differences in our setups:
- mine is uniprocessor Athlon64, yours dual Opteron
- my SCSI HBA sym53c1010, yours Adaptec 39160D (aic7899)
- different tape drives (should not matter)
- my compiler gcc version 4.0.2 20050901 (prerelease) (SUSE Linux), yours
gcc version 3.4.3 20041125 (Gentoo 3.4.3-r1, ssp-3.4.3-0, pie-8.7.7)
> -- James Lamanna
>
>
> Unable to handle kernel paging request at ffff82bc81000030 RIP:
> <ffffffff801657d9>{kmem_cache_free+82}
> PGD 0
> Oops: 0000 [1] SMP
> CPU 1
> Modules linked in:
> Pid: 5814, comm: amrestore Not tainted 2.6.16.18 #2
> RIP: 0010:[<ffffffff801657d9>] <ffffffff801657d9>{kmem_cache_free+82}
> RSP: 0018:ffff81007d4afcd8 EFLAGS: 00010086
> RAX: ffff82bc81000000 RBX: ffff81004119d800 RCX: 000000000000001e
> RDX: ffff81000000c000 RSI: 0000000000000000 RDI: 00000007f0000000
> RBP: ffff81007ff0c800 R08: 0000000000000000 R09: 0000000000000400
> R10: 0000000000000000 R11: ffffffff8014b3d6 R12: ffff810041311480
> R13: 0000000000000400 R14: 0000000000000400 R15: ffff81007e676748
> FS: 00002b7f39708020(0000) GS:ffff810041173bc0(0000) knlGS:0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> CR2: ffff82bc81000030 CR3: 000000007de09000 CR4: 00000000000006e0
> Process amrestore (pid: 5814, threadinfo ffff81007d4ae000, task
> ffff81007e2f8ae0)
> Stack: 0000000000000000 0000000000000246 ffff8100413c9bc0 ffff81007ff0c800
> ffff8100413c9bc0 ffffffff8016dfdc ffff8100413c9bc0 ffff81007fe25408
> 00000000ffffffea ffffffff803187e7
> Call Trace: <ffffffff8016dfdc>{bio_free+48}
> <ffffffff803187e7>{scsi_execute_async+640}
> <ffffffff8035d8d2>{st_do_scsi+422} <ffffffff8035d6e2>{st_sleep_done+0}
> <ffffffff80362950>{st_read+855}
> <ffffffff8013e1ca>{autoremove_wake_function+0}
> <ffffffff80169d7c>{vfs_read+171} <ffffffff8016a0af>{sys_read+69}
> <ffffffff8010a93e>{system_call+126}
This stack trace does not easily tell what is happening:-( Starting from
the bottom, up to scsi_execute_async it looks like a tape read (st_sleep_done
is in the trace because it is parameter to scsi_execute_async). Above that
I can't visualize what is happening. scsi_execute_async does not call
either bio_free or kmem_cache_free.
> Code: 48 8b 48 30 0f b7 51 28 65 8b 04 25 30 00 00 00 39 c2 0f 84
> RIP <ffffffff801657d9>{kmem_cache_free+82} RSP <ffff81007d4afcd8>
> CR2: ffff82bc81000030
>
> dmesg:
> Bootdata ok (command line is root=/dev/sda3
> netconsole=@10.20.2.30/eth1,10001@10.20.2.15/)
> Linux version 2.6.16.18 (root@fs0) (gcc version 3.4.3 20041125 (Gentoo
> 3.4.3-r1, ssp-3.4.3-0, pie-8.7.7)) #2 SMP Tue May 23 18:12:01 PDT 2006
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 0000000000099000 (usable)
> BIOS-e820: 0000000000099000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000c2000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ff20000 (usable)
> BIOS-e820: 000000007ff20000 - 000000007ff2f000 (ACPI data)
> BIOS-e820: 000000007ff2f000 - 000000007ff80000 (ACPI NVS)
> BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
> ACPI: RSDP (v000 PTLTD ) @ 0x00000000000f6f80
> ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @
> 0x000000007ff2af87
> ACPI: FADT (v001 NVIDIA CK8S 0x06040000 PTL_ 0x000f4240) @
> 0x000000007ff2ec9e
> ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @
> 0x000000007ff2ed12
> ACPI: SRAT (v001 AMD HAMMER 0x06040000 AMD 0x00000001) @
> 0x000000007ff2ee9a
> ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @
> 0x000000007ff2ef62
> ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @
> 0x000000007ff2efd8
> ACPI: DSDT (v001 NVIDIA CK8 0x06040000 MSFT 0x0100000e) @
> 0x0000000000000000
> SRAT: PXM 0 -> APIC 0 -> Node 0
> SRAT: PXM 1 -> APIC 1 -> Node 1
> SRAT: Node 0 PXM 0 0-a0000
> SRAT: Node 0 PXM 0 0-40000000
> SRAT: Node 1 PXM 1 40000000-80000000
> NUMA: Using 30 for the hash shift.
> Bootmem setup node 0 0000000000000000-0000000040000000
> Bootmem setup node 1 0000000040000000-000000007ff20000
> On node 0 totalpages: 257138
> DMA zone: 2618 pages, LIFO batch:0
> DMA32 zone: 254520 pages, LIFO batch:31
> Normal zone: 0 pages, LIFO batch:0
> HighMem zone: 0 pages, LIFO batch:0
> On node 1 totalpages: 258340
> DMA zone: 0 pages, LIFO batch:0
> DMA32 zone: 258340 pages, LIFO batch:31
> Normal zone: 0 pages, LIFO batch:0
> HighMem zone: 0 pages, LIFO batch:0
> Nvidia board detected. Ignoring ACPI timer override.
> ACPI: PM-Timer IO Port: 0x8008
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> Processor #0 15:5 APIC version 16
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> Processor #1 15:5 APIC version 16
> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
> ACPI: IOAPIC (id[0x03] address[0xdf200000] gsi_base[24])
> IOAPIC[1]: apic_id 3, version 17, address 0xdf200000, GSI 24-27
> ACPI: IOAPIC (id[0x04] address[0xdf201000] gsi_base[28])
> IOAPIC[2]: apic_id 4, version 17, address 0xdf201000, GSI 28-31
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> ACPI: IRQ9 used by override.
> Setting APIC routing to flat
> Using ACPI (MADT) for SMP configuration information
> Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
> Checking aperture...
> CPU 0: aperture @ 0 size 32 MB
> No AGP bridge found
> Built 2 zonelists
> Kernel command line: root=/dev/sda3
> netconsole=@10.20.2.30/eth1,10001@10.20.2.15/
> netconsole: local port 6665
> netconsole: local IP 10.20.2.30
> netconsole: interface eth1
> netconsole: remote port 10001
> netconsole: remote IP 10.20.2.15
> netconsole: remote ethernet address ff:ff:ff:ff:ff:ff
> Initializing CPU#0
> PID hash table entries: 4096 (order: 12, 131072 bytes)
> Disabling vsyscall due to use of PM timer
> time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
> time.c: Detected 2009.275 MHz processor.
> Console: colour VGA+ 80x25
> Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
> Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
> Memory: 2058556k/2096256k available (3359k kernel code, 37288k
> reserved, 1256k data, 228k init)
> Calibrating delay using timer specific routine.. 4025.03 BogoMIPS
> (lpj=8050070)
> Mount-cache hash table entries: 256
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 1024K (64 bytes/line)
> CPU 0(1) -> Node 0 -> Core 0
> Using local APIC timer interrupts.
> result 12557984
> Detected 12.557 MHz APIC timer.
> Booting processor 1/2 APIC 0x1
> Initializing CPU#1
> Calibrating delay using timer specific routine.. 4018.81 BogoMIPS
> (lpj=8037638)
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 1024K (64 bytes/line)
> CPU 1(1) -> Node 1 -> Core 0
> AMD Opteron(tm) Processor 246 stepping 0a
> CPU 1: Syncing TSC to CPU 0.
> CPU 1: synchronized TSC with CPU 0 (last diff -9 cycles, maxerr 1085 cycles)
> Brought up 2 CPUs
> testing NMI watchdog ... OK.
> migration_cost=566
> DMI present.
> NET: Registered protocol family 16
> ACPI: bus type pci registered
> PCI: Using configuration type 1
> ACPI: Subsystem revision 20060127
> ACPI: Interpreter enabled
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> PCI: Probing PCI hardware (bus 00)
> ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
> Boot video device is 0000:01:06.0
> PCI: Transparent bridge - 0000:00:09.0
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
> ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19) *0
> ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19) *0
> ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19) *0
> ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19) *0
> ACPI: PCI Interrupt Link [LNK5] (IRQs 16 17 18 19) *0, disabled.
> ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *0, disabled.
> ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *0
> ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *0
> ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
> ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
> ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22 23) *0, disabled.
> ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled.
> ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22 23) *0
> ACPI: PCI Interrupt Link [LSI1] (IRQs 20 21 22 23) *0, disabled.
> ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
> ACPI: PCI Root Bridge [PCI2] (0000:08)
> PCI: Probing PCI hardware (bus 08)
> ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.G0PA._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.G0PB._PRT]
> SCSI subsystem initialized
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
> PCI-DMA: Disabling IOMMU.
> PCI: Bridge: 0000:00:09.0
> IO window: 2000-2fff
> MEM window: dd100000-deffffff
> PREFETCH window: 88000000-880fffff
> PCI: Bridge: 0000:00:0d.0
> IO window: disabled.
> MEM window: disabled.
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:0e.0
> IO window: disabled.
> MEM window: disabled.
> PREFETCH window: disabled.
> PCI: Setting latency timer of device 0000:00:09.0 to 64
> PCI: Setting latency timer of device 0000:00:0d.0 to 64
> PCI: Setting latency timer of device 0000:00:0e.0 to 64
> PCI: Failed to allocate mem resource #6:100000@e0000000 for 0000:09:02.0
> PCI: Failed to allocate mem resource #6:100000@e0000000 for 0000:09:02.1
> PCI: Bridge: 0000:08:0a.0
> IO window: 3000-3fff
> MEM window: df300000-df3fffff
> PREFETCH window: df800000-dfffffff
> PCI: Bridge: 0000:08:0b.0
> IO window: 4000-4fff
> MEM window: df400000-df4fffff
> PREFETCH window: 88100000-881fffff
> Simple Boot Flag at 0x36 set to 0x1
> IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
> Total HugeTLB memory allocated, 0
> Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
> SGI XFS with ACLs, security attributes, large block/inode numbers, no
> debug enabled
> SGI XFS Quota Management subsystem
> io scheduler noop registered
> io scheduler deadline registered (default)
> io scheduler cfq registered
> PCI: MSI quirk detected. pci_msi_quirk set.
> PCI: MSI quirk detected. pci_msi_quirk set.
> PCI: Setting latency timer of device 0000:00:0d.0 to 64
> pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
> assign_interrupt_mode Found MSI capability
> PCI: MSI quirk detected. MSI disabled.
> Allocate Port Service[0000:00:0d.0:pcie00]
> PCI: Setting latency timer of device 0000:00:0e.0 to 64
> pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:0e.0:pcie00]
> ACPI: Power Button (FF) [PWRF]
> ACPI: Power Button (CM) [PWRB]
> Real Time Clock Driver v1.12ac
> Linux agpgart interface v0.101 (c) Dave Jones
> serio: i8042 AUX port at 0x60,0x64 irq 12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
> serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> isa bounce pool size: 16 pages
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
> loop: loaded (max 8 devices)
> e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
> e100: Copyright(c) 1999-2005 Intel Corporation
> ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 19
> GSI 16 sharing vector 0xB1 and IRQ 16
> ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNK3] -> GSI 19 (level,
> high) -> IRQ 177
> e100: eth0: e100_probe: addr 0xdd101000, irq 177, MAC addr 00:E0:81:30:33:CE
> tg3.c:v3.49 (Feb 2, 2006)
> GSI 17 sharing vector 0xB9 and IRQ 17
> ACPI: PCI Interrupt 0000:0a:09.0[A] -> GSI 28 (level, low) -> IRQ 185
> eth1: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)]
> (PCI:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:30:d7:f8
> eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
> eth1: dma_rwctrl[763f0000] dma_mask[64-bit]
> GSI 18 sharing vector 0xC1 and IRQ 18
> ACPI: PCI Interrupt 0000:0a:09.1[B] -> GSI 29 (level, low) -> IRQ 193
> eth2: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)]
> (PCI:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:30:d7:f9
> eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
> eth2: dma_rwctrl[763f0000] dma_mask[64-bit]
> tun: Universal TUN/TAP device driver, 1.6
> tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
> netconsole: device eth1 not up yet, forcing it
> tg3: eth1: Link is up at 1000 Mbps, full duplex.
> tg3: eth1: Flow control is off for TX and off for RX.
> netconsole: network logging started
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
> NFORCE-CK804: chipset revision 162
> NFORCE-CK804: not 100% native mode: will probe irqs later
> NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller
> ide0: BM-DMA at 0x1400-0x1407, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0x1408-0x140f, BIOS settings: hdc:pio, hdd:pio
> Probing IDE interface ide0...
> hda: SONY CD-ROM CDU5225, ATAPI CD/DVD-ROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> Probing IDE interface ide1...
> Probing IDE interface ide1...
> hda: ATAPI 52X CD-ROM drive, 96kB Cache, UDMA(33)
> Uniform CD-ROM driver Revision: 3.20
> GSI 19 sharing vector 0xC9 and IRQ 19
> ACPI: PCI Interrupt 0000:0a:03.0[A] -> GSI 30 (level, low) -> IRQ 201
> scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
> <Adaptec 3960D Ultra160 SCSI adapter>
> aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
>
> Vendor: DELL Model: PV-132T Rev: 308D
> Type: Medium Changer ANSI SCSI revision: 02
> target0:0:0: Beginning Domain Validation
> target0:0:0: Ending Domain Validation
> Vendor: IBM Model: ULTRIUM-TD2 Rev: 53Y3
> Type: Sequential-Access ANSI SCSI revision: 03
> target0:0:1: Beginning Domain Validation
> target0:0:1: wide asynchronous
> target0:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
> target0:0:1: Ending Domain Validation
> GSI 20 sharing vector 0xD1 and IRQ 20
> ACPI: PCI Interrupt 0000:0a:03.1[B] -> GSI 31 (level, low) -> IRQ 209
> scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
> <Adaptec 3960D Ultra160 SCSI adapter>
> aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
>
> 3ware Storage Controller device driver for Linux v1.26.02.001.
> 3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
> GSI 21 sharing vector 0xD9 and IRQ 21
> ACPI: PCI Interrupt 0000:09:03.0[A] -> GSI 27 (level, low) -> IRQ 217
> scsi2 : 3ware 9000 Storage Controller
> 3w-9xxx: scsi2: Found a 3ware 9000 Storage Controller at 0xdf340000, IRQ: 217.
> 3w-9xxx: scsi2: Firmware FE9X 2.06.00.009, BIOS BE9X 2.03.01.051, Ports: 8.
> Vendor: AMCC Model: 9500S-8 DISK Rev: 2.06
> Type: Direct-Access ANSI SCSI revision: 03
> libata version 1.20 loaded.
> st: Version 20050830, fixed bufsize 32768, s/g segs 256
> st 0:0:1:0: Attached scsi tape st0<4>st0: try direct i/o: yes (alignment 512
> B)
> SCSI device sda: 1757749248 512-byte hdwr sectors (899968 MB)
> sda: Write Protect is off
> sda: Mode Sense: 23 00 00 00
> SCSI device sda: drive cache: write back, no read (daft)
> SCSI device sda: 1757749248 512-byte hdwr sectors (899968 MB)
> sda: Write Protect is off
> sda: Mode Sense: 23 00 00 00
> SCSI device sda: drive cache: write back, no read (daft)
> sda: sda1 sda2 sda3 sda4 < sda5 >
> sd 2:0:0:0: Attached scsi disk sda
> 0:0:0:0: Attached scsi generic sg0 type 8
> st 0:0:1:0: Attached scsi generic sg1 type 1
> sd 2:0:0:0: Attached scsi generic sg2 type 0
> SCSI Media Changer driver v0.25
> ch0: type #1 (mt): 0x1+1 [medium transport]
> ch0: type #2 (st): 0x1000+23 [storage]
> ch0: type #3 (ie): 0x10+1 [import/export]
> ch0: type #4 (dt): 0x100+1 [data transfer]
> ch0: dt 0x100: ID 1, LUN 0, name: IBM ULTRIUM-TD2 53Y3
> ch0: INITIALIZE ELEMENT STATUS, may take some time ...
> ch0: ... finished
> ch 0:0:0:0: Attached scsi changer ch0
> Fusion MPT base driver 3.03.07
> Copyright (c) 1999-2005 LSI Logic Corporation
> Fusion MPT FC Host driver 3.03.07
> GSI 22 sharing vector 0xE1 and IRQ 22
> ACPI: PCI Interrupt 0000:09:02.0[A] -> GSI 26 (level, low) -> IRQ 225
> mptbase: Initiating ioc0 bringup
> ioc0: FC929XL: Capabilities={Initiator,Target,LAN}
> scsi3 : ioc0: LSIFC929XL, FwRev=01020b00h, Ports=1, MaxQ=1023, IRQ=225
> ACPI: PCI Interrupt 0000:09:02.1[B] -> GSI 27 (level, low) -> IRQ 217
> mptbase: Initiating ioc1 bringup
> ioc1: FC929XL: Capabilities={Initiator,Target,LAN}
> Vendor: APPLE Model: Xse<6>scsi4 : ioc1: LSIFC929XL,
> FwRev=01020b00h, Ports=1, MaxQ=1023, IRQ=217
> rve RAID Rev: 1.50
> Type: Direct-Access ANSI SCSI revision:
> 05<5>usbmon: debugfs is not available
>
> ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 23
> GSI 23 sharing vector 0xE9 and IRQ 23
> ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 23 (level,
> high) -> IRQ 233
> PCI: Setting latency timer of device 0000:00:02.1 to 64
> ehci_hcd 0000:00:02.1: EHCI Host Controller
> ehci_hcd 0000:00:02.1: debug port 1
> PCI: cache line size of 64 is not supported by device 0000:00:02.1
> ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
> ehci_hcd 0000:00:02.1: irq 233, io mem 0xdd001000
> ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> Vendor: AP<6>usb usb1: configuration #1 chosen from 1 choice
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 10 ports detected
> PLE Model: Xserve RAID Rev: 1.50
> Type: Direct-Access ANSI SCSI revision: 05
> sdb : very big device. try to use READ CAPACITY(16).
> sdc : very big device. try to use READ CAPACITY(16).
> SCSI device sdb: 5860573184 512-byte hdwr sectors (3000613 MB)
> SCSI device sdc: 5860573184 512-byte hdwr sectors (3000613 MB)
> sdb: Write Protect is off
> sdb: Mode Sense: ad 00 00 08
> sdc: Write Protect is off
> sdc: Mode Sense: ad 00 00 08
> SCSI device sdb: drive cache: write back
> SCSI device sdc: drive cache: write back
> sdb : very big device. try to use READ CAPACITY(16).
> sdc : very big device. try to use READ CAPACITY(16).
> SCSI device sdb: 5860573184 512-byte hdwr sectors (3000613 MB)
> SCSI device sdc: 5860573184 512-byte hdwr sectors (3000613 MB)
> sdb: Write Protect is off
> sdb: Mode Sense: ad 00 00 08
> sdc: Write Protect is off
> sdc: Mode Sense: ad 00 00 08
> SCSI device sdb: drive cache: write back
> sdb:<5>SCSI device sdc: drive cache: write back
> sdc: unknown partition table
> sd 3:0:0:0: Attached scsi disk sdb
> unknown partition table
> sd 4:0:0:0: Attached scsi disk sdc
> sd 3:0:0:0: Attached scsi generic sg3 type 0
> sd 4:0:0:0: Attached scsi generic sg4 type 0
> ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
> ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
> GSI 24 sharing vector 0x32 and IRQ 24
> ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 22 (level,
> high) -> IRQ 50
> PCI: Setting latency timer of device 0000:00:02.0 to 64
> ohci_hcd 0000:00:02.0: OHCI Host Controller
> ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
> ohci_hcd 0000:00:02.0: irq 50, io mem 0xdd000000
> usb usb2: configuration #1 chosen from 1 choice
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 10 ports detected
> USB Universal Host Controller Interface driver v2.3
> usb 2-3: new low speed USB device using ohci_hcd and address 2
> usb 2-3: configuration #1 chosen from 1 choice
> usbcore: registered new driver usblp
> drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
> Initializing USB Mass Storage driver...
> usbcore: registered new driver usb-storage
> USB Mass Storage support registered.
> input: BTC USB Multimedia Keyboard as /class/input/input0
> input: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on
> usb-0000:00:02.0-3
> input: BTC USB Multimedia Keyboard as /class/input/input1
> input: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on
> input: usb-0000:00:02.0-3
> usbcore: registered new driver usbhid
> drivers/usb/input/hid-core.c: v2.6:USB HID core driver
> mice: PS/2 mouse device common for all mice
> md: linear personality registered for level -1
> md: raid0 personality registered for level 0
> md: raid1 personality registered for level 1
> md: raid5 personality registered for level 5
> md: raid4 personality registered for level 4
> raid5: automatically using best checksumming function: generic_sse
> generic_sse: 6155.000 MB/sec
> raid5: using function: generic_sse (6155.000 MB/sec)
> md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
> md: bitmap version 4.39
> device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
> NET: Registered protocol family 2
> IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
> TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> TCP: Hash tables configured (established 262144 bind 65536)
> TCP reno registered
> TCP bic registered
> NET: Registered protocol family 1
> NET: Registered protocol family 10
> IPv6 over IPv4 tunneling driver
> NET: Registered protocol family 17
> powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.60.0)
> powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x2 (1500 mV)
> powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x6 (1400 mV)
> powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0xe (1200 mV)
> cpu_init done, current fid 0xc, vid 0x2
> powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x2 (1500 mV)
> powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x6 (1400 mV)
> powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0xe (1200 mV)
> cpu_init done, current fid 0xc, vid 0x2
> md: Autodetecting RAID arrays.
> md: autorun ...
> md: ... autorun DONE.
> ReiserFS: sda3: found reiserfs format "3.6" with standard journal
> input: AT Translated Set 2 keyboard as /class/input/input2
> ReiserFS: sda3: using ordered data mode
> ReiserFS: sda3: journal params: device sda3, size 8192, journal first
> block 18, max trans len 1024, max batch 900, max commit age 30, max
> trans age 30
> ReiserFS: sda3: checking transaction log (sda3)
> ReiserFS: sda3: Using r5 hash to sort names
> VFS: Mounted root (reiserfs filesystem) readonly.
> Freeing unused kernel memory: 228k freed
> Adding 3911816k swap on /dev/sda2. Priority:-1 extents:1 across:3911816k
> md: md0 stopped.
> md: md0 stopped.
> md: bind<sdc>
> md: bind<sdb>
> md0: setting max_sectors to 128, segment boundary to 32767
> raid0: looking at sdb
> raid0: comparing sdb(2930286528) with sdb(2930286528)
> raid0: END
> raid0: ==> UNIQUE
> raid0: 1 zones
> raid0: looking at sdc
> raid0: comparing sdc(2930286528) with sdb(2930286528)
> raid0: EQUAL
> raid0: FINAL 1 zones
> raid0: done.
> raid0 : md_size is 5860573056 blocks.
> raid0 : conf->hash_spacing is 5860573056 blocks.
> raid0 : nb_zone is 2.
> raid0 : Allocating 16 bytes for hash.
> XFS: osyncisdsync is now the default, option is deprecated.
> XFS mounting filesystem dm-1
> Ending clean XFS mount for filesystem: dm-1
> XFS: osyncisdsync is now the default, option is deprecated.
> XFS mounting filesystem dm-0
> Ending clean XFS mount for filesystem: dm-0
> XFS: osyncisdsync is now the default, option is deprecated.
> XFS mounting filesystem md0
> Ending clean XFS mount for filesystem: md0
> eth1: no IPv6 routers present
> st0: Block limits 1 - 16777215 bytes.
>
>
> .config:
> #
> # Automatically generated make config: don't edit
> # Linux kernel version: 2.6.16.18
> # Tue May 23 18:09:27 2006
> #
> CONFIG_X86_64=y
> CONFIG_64BIT=y
> CONFIG_X86=y
> CONFIG_SEMAPHORE_SLEEPERS=y
> CONFIG_MMU=y
> CONFIG_RWSEM_GENERIC_SPINLOCK=y
> CONFIG_GENERIC_CALIBRATE_DELAY=y
> CONFIG_X86_CMPXCHG=y
> CONFIG_EARLY_PRINTK=y
> CONFIG_GENERIC_ISA_DMA=y
> CONFIG_GENERIC_IOMAP=y
> CONFIG_ARCH_MAY_HAVE_PC_FDC=y
> CONFIG_DMI=y
>
> #
> # Code maturity level options
> #
> CONFIG_EXPERIMENTAL=y
> CONFIG_LOCK_KERNEL=y
> CONFIG_INIT_ENV_ARG_LIMIT=32
>
> #
> # General setup
> #
> CONFIG_LOCALVERSION=""
> CONFIG_LOCALVERSION_AUTO=y
> CONFIG_SWAP=y
> CONFIG_SYSVIPC=y
> # CONFIG_POSIX_MQUEUE is not set
> # CONFIG_BSD_PROCESS_ACCT is not set
> CONFIG_SYSCTL=y
> # CONFIG_AUDIT is not set
> CONFIG_IKCONFIG=y
> CONFIG_IKCONFIG_PROC=y
> # CONFIG_CPUSETS is not set
> CONFIG_INITRAMFS_SOURCE=""
> CONFIG_UID16=y
> CONFIG_VM86=y
> CONFIG_CC_OPTIMIZE_FOR_SIZE=y
> # CONFIG_EMBEDDED is not set
> CONFIG_KALLSYMS=y
> # CONFIG_KALLSYMS_EXTRA_PASS is not set
> CONFIG_HOTPLUG=y
> CONFIG_PRINTK=y
> CONFIG_BUG=y
> CONFIG_ELF_CORE=y
> CONFIG_BASE_FULL=y
> CONFIG_FUTEX=y
> CONFIG_EPOLL=y
> CONFIG_SHMEM=y
> CONFIG_CC_ALIGN_FUNCTIONS=0
> CONFIG_CC_ALIGN_LABELS=0
> CONFIG_CC_ALIGN_LOOPS=0
> CONFIG_CC_ALIGN_JUMPS=0
> CONFIG_SLAB=y
> # CONFIG_TINY_SHMEM is not set
> CONFIG_BASE_SMALL=0
> # CONFIG_SLOB is not set
>
> #
> # Loadable module support
> #
> CONFIG_MODULES=y
> CONFIG_MODULE_UNLOAD=y
> # CONFIG_MODULE_FORCE_UNLOAD is not set
> CONFIG_OBSOLETE_MODPARM=y
> # CONFIG_MODVERSIONS is not set
> # CONFIG_MODULE_SRCVERSION_ALL is not set
> # CONFIG_KMOD is not set
> CONFIG_STOP_MACHINE=y
>
> #
> # Block layer
> #
> CONFIG_LBD=y
>
> #
> # IO Schedulers
> #
> CONFIG_IOSCHED_NOOP=y
> # CONFIG_IOSCHED_AS is not set
> CONFIG_IOSCHED_DEADLINE=y
> CONFIG_IOSCHED_CFQ=y
> # CONFIG_DEFAULT_AS is not set
> CONFIG_DEFAULT_DEADLINE=y
> # CONFIG_DEFAULT_CFQ is not set
> # CONFIG_DEFAULT_NOOP is not set
> CONFIG_DEFAULT_IOSCHED="deadline"
>
> #
> # Processor type and features
> #
> CONFIG_X86_PC=y
> # CONFIG_X86_VSMP is not set
> CONFIG_MK8=y
> # CONFIG_MPSC is not set
> # CONFIG_GENERIC_CPU is not set
> CONFIG_X86_L1_CACHE_BYTES=64
> CONFIG_X86_L1_CACHE_SHIFT=6
> CONFIG_X86_TSC=y
> CONFIG_X86_GOOD_APIC=y
> # CONFIG_MICROCODE is not set
> CONFIG_X86_MSR=y
> CONFIG_X86_CPUID=y
> CONFIG_X86_IO_APIC=y
> CONFIG_X86_LOCAL_APIC=y
> CONFIG_MTRR=y
> CONFIG_SMP=y
> CONFIG_SCHED_SMT=y
> CONFIG_PREEMPT_NONE=y
> # CONFIG_PREEMPT_VOLUNTARY is not set
> # CONFIG_PREEMPT is not set
> CONFIG_PREEMPT_BKL=y
> CONFIG_NUMA=y
> CONFIG_K8_NUMA=y
> CONFIG_X86_64_ACPI_NUMA=y
> # CONFIG_NUMA_EMU is not set
> CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
> CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
> CONFIG_ARCH_SPARSEMEM_ENABLE=y
> CONFIG_SELECT_MEMORY_MODEL=y
> # CONFIG_FLATMEM_MANUAL is not set
> CONFIG_DISCONTIGMEM_MANUAL=y
> # CONFIG_SPARSEMEM_MANUAL is not set
> CONFIG_DISCONTIGMEM=y
> CONFIG_FLAT_NODE_MEM_MAP=y
> CONFIG_NEED_MULTIPLE_NODES=y
> # CONFIG_SPARSEMEM_STATIC is not set
> CONFIG_SPLIT_PTLOCK_CPUS=4
>
>
>
> CONFIG_MIGRATION=y
> CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
> CONFIG_NR_CPUS=32
> # CONFIG_HOTPLUG_CPU is not set
> CONFIG_HPET_TIMER=y
> CONFIG_HPET_EMULATE_RTC=y
> CONFIG_GART_IOMMU=y
> CONFIG_SWIOTLB=y
> CONFIG_X86_MCE=y
> CONFIG_X86_MCE_INTEL=y
> CONFIG_X86_MCE_AMD=y
> # CONFIG_KEXEC is not set
> # CONFIG_CRASH_DUMP is not set
> CONFIG_PHYSICAL_START=0x100000
> CONFIG_SECCOMP=y
> # CONFIG_HZ_100 is not set
> CONFIG_HZ_250=y
> # CONFIG_HZ_1000 is not set
> CONFIG_HZ=250
> CONFIG_GENERIC_HARDIRQS=y
> CONFIG_GENERIC_IRQ_PROBE=y
> CONFIG_ISA_DMA_API=y
> CONFIG_GENERIC_PENDING_IRQ=y
>
> #
> # Power management options
> #
> CONFIG_PM=y
> CONFIG_PM_LEGACY=y
> # CONFIG_PM_DEBUG is not set
>
> #
> # ACPI (Advanced Configuration and Power Interface) Support
> #
> CONFIG_ACPI=y
> CONFIG_ACPI_AC=y
> CONFIG_ACPI_BATTERY=y
> CONFIG_ACPI_BUTTON=y
> # CONFIG_ACPI_VIDEO is not set
> # CONFIG_ACPI_HOTKEY is not set
> CONFIG_ACPI_FAN=y
> CONFIG_ACPI_PROCESSOR=y
> CONFIG_ACPI_THERMAL=y
> CONFIG_ACPI_NUMA=y
> # CONFIG_ACPI_ASUS is not set
> # CONFIG_ACPI_IBM is not set
> CONFIG_ACPI_TOSHIBA=y
> CONFIG_ACPI_BLACKLIST_YEAR=0
> # CONFIG_ACPI_DEBUG is not set
> CONFIG_ACPI_EC=y
> CONFIG_ACPI_POWER=y
> CONFIG_ACPI_SYSTEM=y
> CONFIG_X86_PM_TIMER=y
> # CONFIG_ACPI_CONTAINER is not set
>
> #
> # CPU Frequency scaling
> #
> CONFIG_CPU_FREQ=y
> CONFIG_CPU_FREQ_TABLE=y
> # CONFIG_CPU_FREQ_DEBUG is not set
> CONFIG_CPU_FREQ_STAT=y
> # CONFIG_CPU_FREQ_STAT_DETAILS is not set
> CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
> # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
> CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
> # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
> CONFIG_CPU_FREQ_GOV_USERSPACE=y
> CONFIG_CPU_FREQ_GOV_ONDEMAND=y
> # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
>
> #
> # CPUFreq processor drivers
> #
> CONFIG_X86_POWERNOW_K8=y
> CONFIG_X86_POWERNOW_K8_ACPI=y
> # CONFIG_X86_SPEEDSTEP_CENTRINO is not set
> CONFIG_X86_ACPI_CPUFREQ=y
>
> #
> # shared options
> #
> CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y
> # CONFIG_X86_SPEEDSTEP_LIB is not set
>
> #
> # Bus options (PCI etc.)
> #
> CONFIG_PCI=y
> CONFIG_PCI_DIRECT=y
> CONFIG_PCI_MMCONFIG=y
> # CONFIG_UNORDERED_IO is not set
> CONFIG_PCIEPORTBUS=y
> CONFIG_PCI_MSI=y
> # CONFIG_PCI_LEGACY_PROC is not set
>
> #
> # PCCARD (PCMCIA/CardBus) support
> #
> #CONFIG_PCCARD is not set
>
> #
> # PCI Hotplug Support
> #
> #CONFIG_HOTPLUG_PCI is not set
>
> #
> # Executable file formats / Emulations
> #
> CONFIG_BINFMT_ELF=y
> # CONFIG_BINFMT_MISC is not set
> CONFIG_IA32_EMULATION=y
> CONFIG_IA32_AOUT=y
> CONFIG_COMPAT=y
> CONFIG_SYSVIPC_COMPAT=y
>
> #
> # Networking
> #
> CONFIG_NET=y
>
> #
> # Networking options
> #
> #CONFIG_NETDEBUG is not set
> CONFIG_PACKET=y
> # CONFIG_PACKET_MMAP is not set
> CONFIG_UNIX=y
> # CONFIG_NET_KEY is not set
> CONFIG_INET=y
> CONFIG_IP_MULTICAST=y
> # CONFIG_IP_ADVANCED_ROUTER is not set
> CONFIG_IP_FIB_HASH=y
> CONFIG_IP_PNP=y
> CONFIG_IP_PNP_DHCP=y
> # CONFIG_IP_PNP_BOOTP is not set
> # CONFIG_IP_PNP_RARP is not set
> # CONFIG_NET_IPIP is not set
> # CONFIG_NET_IPGRE is not set
> # CONFIG_IP_MROUTE is not set
> # CONFIG_ARPD is not set
> # CONFIG_SYN_COOKIES is not set
> # CONFIG_INET_AH is not set
> # CONFIG_INET_ESP is not set
> # CONFIG_INET_IPCOMP is not set
> # CONFIG_INET_TUNNEL is not set
> CONFIG_INET_DIAG=y
> CONFIG_INET_TCP_DIAG=y
> # CONFIG_TCP_CONG_ADVANCED is not set
> CONFIG_TCP_CONG_BIC=y
> CONFIG_IPV6=y
> # CONFIG_IPV6_PRIVACY is not set
> # CONFIG_INET6_AH is not set
> # CONFIG_INET6_ESP is not set
> # CONFIG_INET6_IPCOMP is not set
> # CONFIG_INET6_TUNNEL is not set
> # CONFIG_IPV6_TUNNEL is not set
> # CONFIG_NETFILTER is not set
>
> #
> # DCCP Configuration (EXPERIMENTAL)
> #
> #CONFIG_IP_DCCP is not set
>
> #
> # SCTP Configuration (EXPERIMENTAL)
> #
> #CONFIG_IP_SCTP is not set
>
> #
> # TIPC Configuration (EXPERIMENTAL)
> #
> # CONFIG_TIPC is not set
> # CONFIG_ATM is not set
> # CONFIG_BRIDGE is not set
> # CONFIG_VLAN_8021Q is not set
> # CONFIG_DECNET is not set
> # CONFIG_LLC2 is not set
> # CONFIG_IPX is not set
> # CONFIG_ATALK is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_NET_DIVERT is not set
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
>
> #
> # QoS and/or fair queueing
> #
> #CONFIG_NET_SCHED is not set
>
> #
> # Network testing
> #
> # CONFIG_NET_PKTGEN is not set
> # CONFIG_HAMRADIO is not set
> # CONFIG_IRDA is not set
> # CONFIG_BT is not set
> # CONFIG_IEEE80211 is not set
>
> #
> # Device Drivers
> #
>
> #
> # Generic Driver Options
> #
> CONFIG_STANDALONE=y
> CONFIG_PREVENT_FIRMWARE_BUILD=y
> # CONFIG_FW_LOADER is not set
>
> #
> # Connector - unified userspace <-> kernelspace linker
> #
> #CONFIG_CONNECTOR is not set
>
> #
> # Memory Technology Devices (MTD)
> #
> #CONFIG_MTD is not set
>
> #
> # Parallel port support
> #
> #CONFIG_PARPORT is not set
>
> #
> # Plug and Play support
> #
> #CONFIG_PNP is not set
>
> #
> # Block devices
> #
> CONFIG_BLK_DEV_FD=y
> # CONFIG_BLK_CPQ_DA is not set
> # CONFIG_BLK_CPQ_CISS_DA is not set
> # CONFIG_BLK_DEV_DAC960 is not set
> # CONFIG_BLK_DEV_UMEM is not set
> # CONFIG_BLK_DEV_COW_COMMON is not set
> CONFIG_BLK_DEV_LOOP=y
> # CONFIG_BLK_DEV_CRYPTOLOOP is not set
> # CONFIG_BLK_DEV_NBD is not set
> # CONFIG_BLK_DEV_SX8 is not set
> # CONFIG_BLK_DEV_UB is not set
> CONFIG_BLK_DEV_RAM=y
> CONFIG_BLK_DEV_RAM_COUNT=16
> CONFIG_BLK_DEV_RAM_SIZE=4096
> CONFIG_BLK_DEV_INITRD=y
> # CONFIG_CDROM_PKTCDVD is not set
> # CONFIG_ATA_OVER_ETH is not set
>
> #
> # ATA/ATAPI/MFM/RLL support
> #
> CONFIG_IDE=y
> CONFIG_BLK_DEV_IDE=y
>
> #
> # Please see Documentation/ide.txt for help/info on IDE drives
> #
> # CONFIG_BLK_DEV_IDE_SATA is not set
> # CONFIG_BLK_DEV_HD_IDE is not set
> CONFIG_BLK_DEV_IDEDISK=y
> CONFIG_IDEDISK_MULTI_MODE=y
> CONFIG_BLK_DEV_IDECD=y
> # CONFIG_BLK_DEV_IDETAPE is not set
> # CONFIG_BLK_DEV_IDEFLOPPY is not set
> # CONFIG_BLK_DEV_IDESCSI is not set
> # CONFIG_IDE_TASK_IOCTL is not set
>
> #
> # IDE chipset support/bugfixes
> #
> CONFIG_IDE_GENERIC=y
> # CONFIG_BLK_DEV_CMD640 is not set
> CONFIG_BLK_DEV_IDEPCI=y
> # CONFIG_IDEPCI_SHARE_IRQ is not set
> # CONFIG_BLK_DEV_OFFBOARD is not set
> # CONFIG_BLK_DEV_GENERIC is not set
> # CONFIG_BLK_DEV_OPTI621 is not set
> # CONFIG_BLK_DEV_RZ1000 is not set
> CONFIG_BLK_DEV_IDEDMA_PCI=y
> # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
> CONFIG_IDEDMA_PCI_AUTO=y
> # CONFIG_IDEDMA_ONLYDISK is not set
> # CONFIG_BLK_DEV_AEC62XX is not set
> # CONFIG_BLK_DEV_ALI15X3 is not set
> CONFIG_BLK_DEV_AMD74XX=y
> # CONFIG_BLK_DEV_ATIIXP is not set
> # CONFIG_BLK_DEV_CMD64X is not set
> # CONFIG_BLK_DEV_TRIFLEX is not set
> # CONFIG_BLK_DEV_CY82C693 is not set
> # CONFIG_BLK_DEV_CS5520 is not set
> # CONFIG_BLK_DEV_CS5530 is not set
> # CONFIG_BLK_DEV_HPT34X is not set
> # CONFIG_BLK_DEV_HPT366 is not set
> # CONFIG_BLK_DEV_SC1200 is not set
> CONFIG_BLK_DEV_PIIX=y
> # CONFIG_BLK_DEV_IT821X is not set
> # CONFIG_BLK_DEV_NS87415 is not set
> # CONFIG_BLK_DEV_PDC202XX_OLD is not set
> CONFIG_BLK_DEV_PDC202XX_NEW=y
> # CONFIG_BLK_DEV_SVWKS is not set
> # CONFIG_BLK_DEV_SIIMAGE is not set
> # CONFIG_BLK_DEV_SIS5513 is not set
> # CONFIG_BLK_DEV_SLC90E66 is not set
> # CONFIG_BLK_DEV_TRM290 is not set
> # CONFIG_BLK_DEV_VIA82CXXX is not set
> # CONFIG_IDE_ARM is not set
> CONFIG_BLK_DEV_IDEDMA=y
> # CONFIG_IDEDMA_IVB is not set
> CONFIG_IDEDMA_AUTO=y
> # CONFIG_BLK_DEV_HD is not set
>
> #
> # SCSI device support
> #
> CONFIG_RAID_ATTRS=y
> CONFIG_SCSI=y
> # CONFIG_SCSI_PROC_FS is not set
>
> #
> # SCSI support type (disk, tape, CD-ROM)
> #
> CONFIG_BLK_DEV_SD=y
> CONFIG_CHR_DEV_ST=y
> # CONFIG_CHR_DEV_OSST is not set
> # CONFIG_BLK_DEV_SR is not set
> CONFIG_CHR_DEV_SG=y
> CONFIG_CHR_DEV_SCH=y
>
> #
> # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
> #
> # CONFIG_SCSI_MULTI_LUN is not set
> # CONFIG_SCSI_CONSTANTS is not set
> # CONFIG_SCSI_LOGGING is not set
>
> #
> # SCSI Transport Attributes
> #
> CONFIG_SCSI_SPI_ATTRS=y
> CONFIG_SCSI_FC_ATTRS=y
> # CONFIG_SCSI_ISCSI_ATTRS is not set
> # CONFIG_SCSI_SAS_ATTRS is not set
>
> #
> # SCSI low-level drivers
> #
> #CONFIG_ISCSI_TCP is not set
> CONFIG_BLK_DEV_3W_XXXX_RAID=y
> CONFIG_SCSI_3W_9XXX=y
> # CONFIG_SCSI_ACARD is not set
> # CONFIG_SCSI_AACRAID is not set
> CONFIG_SCSI_AIC7XXX=y
> CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
> CONFIG_AIC7XXX_RESET_DELAY_MS=15000
> CONFIG_AIC7XXX_DEBUG_ENABLE=y
> CONFIG_AIC7XXX_DEBUG_MASK=0
> CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
> # CONFIG_SCSI_AIC7XXX_OLD is not set
> CONFIG_SCSI_AIC79XX=y
> CONFIG_AIC79XX_CMDS_PER_DEVICE=32
> CONFIG_AIC79XX_RESET_DELAY_MS=4000
> # CONFIG_AIC79XX_ENABLE_RD_STRM is not set
> # CONFIG_AIC79XX_DEBUG_ENABLE is not set
> CONFIG_AIC79XX_DEBUG_MASK=0
> # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
> # CONFIG_MEGARAID_NEWGEN is not set
> # CONFIG_MEGARAID_LEGACY is not set
> # CONFIG_MEGARAID_SAS is not set
> CONFIG_SCSI_SATA=y
> # CONFIG_SCSI_SATA_AHCI is not set
> # CONFIG_SCSI_SATA_SVW is not set
> CONFIG_SCSI_ATA_PIIX=y
> # CONFIG_SCSI_SATA_MV is not set
> # CONFIG_SCSI_SATA_NV is not set
> # CONFIG_SCSI_PDC_ADMA is not set
> # CONFIG_SCSI_SATA_QSTOR is not set
> # CONFIG_SCSI_SATA_PROMISE is not set
> # CONFIG_SCSI_SATA_SX4 is not set
> # CONFIG_SCSI_SATA_SIL is not set
> # CONFIG_SCSI_SATA_SIL24 is not set
> # CONFIG_SCSI_SATA_SIS is not set
> # CONFIG_SCSI_SATA_ULI is not set
> CONFIG_SCSI_SATA_VIA=y
> # CONFIG_SCSI_SATA_VITESSE is not set
> CONFIG_SCSI_SATA_INTEL_COMBINED=y
> # CONFIG_SCSI_BUSLOGIC is not set
> # CONFIG_SCSI_DMX3191D is not set
> # CONFIG_SCSI_EATA is not set
> # CONFIG_SCSI_FUTURE_DOMAIN is not set
> # CONFIG_SCSI_GDTH is not set
> # CONFIG_SCSI_IPS is not set
> # CONFIG_SCSI_INITIO is not set
> # CONFIG_SCSI_INIA100 is not set
> # CONFIG_SCSI_SYM53C8XX_2 is not set
> # CONFIG_SCSI_IPR is not set
> # CONFIG_SCSI_QLOGIC_FC is not set
> # CONFIG_SCSI_QLOGIC_1280 is not set
> # CONFIG_SCSI_QLA_FC is not set
> # CONFIG_SCSI_LPFC is not set
> # CONFIG_SCSI_DC395x is not set
> # CONFIG_SCSI_DC390T is not set
> # CONFIG_SCSI_DEBUG is not set
>
> #
> # Multi-device support (RAID and LVM)
> #
> CONFIG_MD=y
> CONFIG_BLK_DEV_MD=y
> CONFIG_MD_LINEAR=y
> CONFIG_MD_RAID0=y
> CONFIG_MD_RAID1=y
> # CONFIG_MD_RAID10 is not set
> CONFIG_MD_RAID5=y
> # CONFIG_MD_RAID6 is not set
> # CONFIG_MD_MULTIPATH is not set
> # CONFIG_MD_FAULTY is not set
> CONFIG_BLK_DEV_DM=y
> # CONFIG_DM_CRYPT is not set
> # CONFIG_DM_SNAPSHOT is not set
> # CONFIG_DM_MIRROR is not set
> # CONFIG_DM_ZERO is not set
> # CONFIG_DM_MULTIPATH is not set
>
> #
> # Fusion MPT device support
> #
> CONFIG_FUSION=y
> # CONFIG_FUSION_SPI is not set
> CONFIG_FUSION_FC=y
> # CONFIG_FUSION_SAS is not set
> CONFIG_FUSION_MAX_SGE=128
> # CONFIG_FUSION_CTL is not set
> # CONFIG_FUSION_LAN is not set
>
> #
> # IEEE 1394 (FireWire) support
> #
> #CONFIG_IEEE1394 is not set
>
> #
> # I2O device support
> #
> #CONFIG_I2O is not set
>
> #
> # Network device support
> #
> CONFIG_NETDEVICES=y
> # CONFIG_DUMMY is not set
> # CONFIG_BONDING is not set
> # CONFIG_EQUALIZER is not set
> CONFIG_TUN=y
>
> #
> # ARCnet devices
> #
> #CONFIG_ARCNET is not set
>
> #
> # PHY device support
> #
> #CONFIG_PHYLIB is not set
>
> #
> # Ethernet (10 or 100Mbit)
> #
> CONFIG_NET_ETHERNET=y
> CONFIG_MII=y
> # CONFIG_HAPPYMEAL is not set
> # CONFIG_SUNGEM is not set
> # CONFIG_CASSINI is not set
> # CONFIG_NET_VENDOR_3COM is not set
>
> #
> # Tulip family network device support
> #
> # CONFIG_NET_TULIP is not set
> # CONFIG_HP100 is not set
> CONFIG_NET_PCI=y
> # CONFIG_PCNET32 is not set
> # CONFIG_AMD8111_ETH is not set
> # CONFIG_ADAPTEC_STARFIRE is not set
> # CONFIG_B44 is not set
> # CONFIG_FORCEDETH is not set
> # CONFIG_DGRS is not set
> # CONFIG_EEPRO100 is not set
> CONFIG_E100=y
> # CONFIG_FEALNX is not set
> # CONFIG_NATSEMI is not set
> # CONFIG_NE2K_PCI is not set
> # CONFIG_8139CP is not set
> # CONFIG_8139TOO is not set
> # CONFIG_SIS900 is not set
> # CONFIG_EPIC100 is not set
> # CONFIG_SUNDANCE is not set
> # CONFIG_VIA_RHINE is not set
>
> #
> # Ethernet (1000 Mbit)
> #
> # CONFIG_ACENIC is not set
> # CONFIG_DL2K is not set
> # CONFIG_E1000 is not set
> # CONFIG_NS83820 is not set
> # CONFIG_HAMACHI is not set
> # CONFIG_YELLOWFIN is not set
> # CONFIG_R8169 is not set
> # CONFIG_SIS190 is not set
> # CONFIG_SKGE is not set
> # CONFIG_SKY2 is not set
> # CONFIG_SK98LIN is not set
> # CONFIG_VIA_VELOCITY is not set
> CONFIG_TIGON3=y
> # CONFIG_BNX2 is not set
>
> #
> # Ethernet (10000 Mbit)
> #
> # CONFIG_CHELSIO_T1 is not set
> # CONFIG_IXGB is not set
> CONFIG_S2IO=m
> # CONFIG_S2IO_NAPI is not set
>
> #
> # Token Ring devices
> #
> #CONFIG_TR is not set
>
> #
> # Wireless LAN (non-hamradio)
> #
> #CONFIG_NET_RADIO is not set
>
> #
> # Wan interfaces
> #
> # CONFIG_WAN is not set
> # CONFIG_FDDI is not set
> # CONFIG_HIPPI is not set
> # CONFIG_PPP is not set
> # CONFIG_SLIP is not set
> CONFIG_NET_FC=y
> # CONFIG_SHAPER is not set
> CONFIG_NETCONSOLE=y
> CONFIG_NETPOLL=y
> # CONFIG_NETPOLL_RX is not set
> # CONFIG_NETPOLL_TRAP is not set
> CONFIG_NET_POLL_CONTROLLER=y
>
> #
> # ISDN subsystem
> #
> #CONFIG_ISDN is not set
>
> #
> # Telephony Support
> #
> #CONFIG_PHONE is not set
>
> #
> # Input device support
> #
> CONFIG_INPUT=y
>
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=y
> CONFIG_INPUT_MOUSEDEV_PSAUX=y
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> # CONFIG_INPUT_JOYDEV is not set
> # CONFIG_INPUT_TSDEV is not set
> CONFIG_INPUT_EVDEV=y
> # CONFIG_INPUT_EVBUG is not set
>
> #
> # Input Device Drivers
> #
> CONFIG_INPUT_KEYBOARD=y
> CONFIG_KEYBOARD_ATKBD=y
> # CONFIG_KEYBOARD_SUNKBD is not set
> # CONFIG_KEYBOARD_LKKBD is not set
> # CONFIG_KEYBOARD_XTKBD is not set
> # CONFIG_KEYBOARD_NEWTON is not set
> CONFIG_INPUT_MOUSE=y
> CONFIG_MOUSE_PS2=y
> # CONFIG_MOUSE_SERIAL is not set
> # CONFIG_MOUSE_VSXXXAA is not set
> # CONFIG_INPUT_JOYSTICK is not set
> # CONFIG_INPUT_TOUCHSCREEN is not set
> # CONFIG_INPUT_MISC is not set
>
> #
> # Hardware I/O ports
> #
> CONFIG_SERIO=y
> CONFIG_SERIO_I8042=y
> # CONFIG_SERIO_SERPORT is not set
> # CONFIG_SERIO_CT82C710 is not set
> # CONFIG_SERIO_PCIPS2 is not set
> CONFIG_SERIO_LIBPS2=y
> # CONFIG_SERIO_RAW is not set
> # CONFIG_GAMEPORT is not set
>
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_VT_CONSOLE=y
> CONFIG_HW_CONSOLE=y
> # CONFIG_SERIAL_NONSTANDARD is not set
>
> #
> # Serial drivers
> #
> CONFIG_SERIAL_8250=y
> CONFIG_SERIAL_8250_CONSOLE=y
> # CONFIG_SERIAL_8250_ACPI is not set
> CONFIG_SERIAL_8250_NR_UARTS=4
> CONFIG_SERIAL_8250_RUNTIME_UARTS=4
> # CONFIG_SERIAL_8250_EXTENDED is not set
>
> #
> # Non-8250 serial port support
> #
> CONFIG_SERIAL_CORE=y
> CONFIG_SERIAL_CORE_CONSOLE=y
> # CONFIG_SERIAL_JSM is not set
> CONFIG_UNIX98_PTYS=y
> CONFIG_LEGACY_PTYS=y
> CONFIG_LEGACY_PTY_COUNT=256
>
> #
> # IPMI
> #
> #CONFIG_IPMI_HANDLER is not set
>
> #
> # Watchdog Cards
> #
> #CONFIG_WATCHDOG is not set
> CONFIG_HW_RANDOM=y
> # CONFIG_NVRAM is not set
> CONFIG_RTC=y
> # CONFIG_DTLK is not set
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
>
> #
> # Ftape, the floppy tape device driver
> #
> CONFIG_AGP=y
> CONFIG_AGP_AMD64=y
> CONFIG_AGP_INTEL=y
> # CONFIG_DRM is not set
> # CONFIG_MWAVE is not set
> CONFIG_RAW_DRIVER=y
> CONFIG_MAX_RAW_DEVS=256
> CONFIG_HPET=y
> # CONFIG_HPET_RTC_IRQ is not set
> CONFIG_HPET_MMAP=y
> # CONFIG_HANGCHECK_TIMER is not set
>
> #
> # TPM devices
> #
> # CONFIG_TCG_TPM is not set
> # CONFIG_TELCLOCK is not set
>
> #
> # I2C support
> #
> #CONFIG_I2C is not set
>
> #
> # SPI support
> #
> # CONFIG_SPI is not set
> # CONFIG_SPI_MASTER is not set
>
> #
> # Dallas's 1-wire bus
> #
> #CONFIG_W1 is not set
>
> #
> # Hardware Monitoring support
> #
> CONFIG_HWMON=y
> # CONFIG_HWMON_VID is not set
> # CONFIG_SENSORS_F71805F is not set
> # CONFIG_SENSORS_HDAPS is not set
> # CONFIG_HWMON_DEBUG_CHIP is not set
>
> #
> # Misc devices
> #
> #CONFIG_IBM_ASM is not set
>
> #
> # Multimedia Capabilities Port drivers
> #
>
> #
> # Multimedia devices
> #
> #CONFIG_VIDEO_DEV is not set
>
> #
> # Digital Video Broadcasting Devices
> #
> #CONFIG_DVB is not set
>
> #
> # Graphics support
> #
> #CONFIG_FB is not set
> CONFIG_VIDEO_SELECT=y
>
> #
> # Console display driver support
> #
> CONFIG_VGA_CONSOLE=y
> CONFIG_DUMMY_CONSOLE=y
>
> #
> # Sound
> #
> #CONFIG_SOUND is not set
>
> #
> # USB support
> #
> CONFIG_USB_ARCH_HAS_HCD=y
> CONFIG_USB_ARCH_HAS_OHCI=y
> CONFIG_USB=y
> # CONFIG_USB_DEBUG is not set
>
> #
> # Miscellaneous USB options
> #
> CONFIG_USB_DEVICEFS=y
> # CONFIG_USB_BANDWIDTH is not set
> # CONFIG_USB_DYNAMIC_MINORS is not set
> # CONFIG_USB_SUSPEND is not set
> # CONFIG_USB_OTG is not set
>
> #
> # USB Host Controller Drivers
> #
> CONFIG_USB_EHCI_HCD=y
> # CONFIG_USB_EHCI_SPLIT_ISO is not set
> # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
> # CONFIG_USB_ISP116X_HCD is not set
> CONFIG_USB_OHCI_HCD=y
> # CONFIG_USB_OHCI_BIG_ENDIAN is not set
> CONFIG_USB_OHCI_LITTLE_ENDIAN=y
> CONFIG_USB_UHCI_HCD=y
> # CONFIG_USB_SL811_HCD is not set
>
> #
> # USB Device Class drivers
> #
> #CONFIG_USB_ACM is not set
> CONFIG_USB_PRINTER=y
>
> #
> #NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
> #
>
> #
> # may also be needed; see USB_STORAGE Help for more information
> #
> CONFIG_USB_STORAGE=y
> # CONFIG_USB_STORAGE_DEBUG is not set
> # CONFIG_USB_STORAGE_DATAFAB is not set
> # CONFIG_USB_STORAGE_FREECOM is not set
> # CONFIG_USB_STORAGE_ISD200 is not set
> # CONFIG_USB_STORAGE_DPCM is not set
> # CONFIG_USB_STORAGE_USBAT is not set
> # CONFIG_USB_STORAGE_SDDR09 is not set
> # CONFIG_USB_STORAGE_SDDR55 is not set
> # CONFIG_USB_STORAGE_JUMPSHOT is not set
> # CONFIG_USB_STORAGE_ALAUDA is not set
> # CONFIG_USB_LIBUSUAL is not set
>
> #
> # USB Input Devices
> #
> CONFIG_USB_HID=y
> CONFIG_USB_HIDINPUT=y
> # CONFIG_USB_HIDINPUT_POWERBOOK is not set
> # CONFIG_HID_FF is not set
> # CONFIG_USB_HIDDEV is not set
> # CONFIG_USB_AIPTEK is not set
> # CONFIG_USB_WACOM is not set
> # CONFIG_USB_ACECAD is not set
> # CONFIG_USB_KBTAB is not set
> # CONFIG_USB_POWERMATE is not set
> # CONFIG_USB_MTOUCH is not set
> # CONFIG_USB_ITMTOUCH is not set
> # CONFIG_USB_EGALAX is not set
> # CONFIG_USB_YEALINK is not set
> # CONFIG_USB_XPAD is not set
> # CONFIG_USB_ATI_REMOTE is not set
> # CONFIG_USB_ATI_REMOTE2 is not set
> # CONFIG_USB_KEYSPAN_REMOTE is not set
> # CONFIG_USB_APPLETOUCH is not set
>
> #
> # USB Imaging devices
> #
> # CONFIG_USB_MDC800 is not set
> # CONFIG_USB_MICROTEK is not set
>
> #
> # USB Multimedia devices
> #
> #CONFIG_USB_DABUSB is not set
>
> #
> # Video4Linux support is needed for USB Multimedia device support
> #
>
> #
> # USB Network Adapters
> #
> # CONFIG_USB_CATC is not set
> # CONFIG_USB_KAWETH is not set
> # CONFIG_USB_PEGASUS is not set
> # CONFIG_USB_RTL8150 is not set
> # CONFIG_USB_USBNET is not set
> CONFIG_USB_MON=y
>
> #
> # USB port drivers
> #
>
> #
> # USB Serial Converter support
> #
> #CONFIG_USB_SERIAL is not set
>
> #
> # USB Miscellaneous drivers
> #
> # CONFIG_USB_EMI62 is not set
> # CONFIG_USB_EMI26 is not set
> # CONFIG_USB_AUERSWALD is not set
> # CONFIG_USB_RIO500 is not set
> # CONFIG_USB_LEGOTOWER is not set
> # CONFIG_USB_LCD is not set
> # CONFIG_USB_LED is not set
> # CONFIG_USB_CYTHERM is not set
> # CONFIG_USB_PHIDGETKIT is not set
> # CONFIG_USB_PHIDGETSERVO is not set
> # CONFIG_USB_IDMOUSE is not set
> # CONFIG_USB_SISUSBVGA is not set
> # CONFIG_USB_LD is not set
> # CONFIG_USB_TEST is not set
>
> #
> # USB DSL modem support
> #
>
> #
> # USB Gadget Support
> #
> #CONFIG_USB_GADGET is not set
>
> #
> # MMC/SD Card support
> #
> #CONFIG_MMC is not set
>
> #
> # InfiniBand support
> #
> #CONFIG_INFINIBAND is not set
>
> #
> # EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
> #
> #CONFIG_EDAC is not set
>
> #
> # Firmware Drivers
> #
> # CONFIG_EDD is not set
> # CONFIG_DELL_RBU is not set
> # CONFIG_DCDBAS is not set
>
> #
> # File systems
> #
> CONFIG_EXT2_FS=y
> CONFIG_EXT2_FS_XATTR=y
> CONFIG_EXT2_FS_POSIX_ACL=y
> # CONFIG_EXT2_FS_SECURITY is not set
> # CONFIG_EXT2_FS_XIP is not set
> CONFIG_EXT3_FS=y
> CONFIG_EXT3_FS_XATTR=y
> CONFIG_EXT3_FS_POSIX_ACL=y
> # CONFIG_EXT3_FS_SECURITY is not set
> CONFIG_JBD=y
> # CONFIG_JBD_DEBUG is not set
> CONFIG_FS_MBCACHE=y
> CONFIG_REISERFS_FS=y
> # CONFIG_REISERFS_CHECK is not set
> # CONFIG_REISERFS_PROC_INFO is not set
> CONFIG_REISERFS_FS_XATTR=y
> CONFIG_REISERFS_FS_POSIX_ACL=y
> # CONFIG_REISERFS_FS_SECURITY is not set
> # CONFIG_JFS_FS is not set
> CONFIG_FS_POSIX_ACL=y
> CONFIG_XFS_FS=y
> CONFIG_XFS_EXPORT=y
> CONFIG_XFS_QUOTA=y
> CONFIG_XFS_SECURITY=y
> CONFIG_XFS_POSIX_ACL=y
> # CONFIG_XFS_RT is not set
> # CONFIG_OCFS2_FS is not set
> # CONFIG_MINIX_FS is not set
> # CONFIG_ROMFS_FS is not set
> CONFIG_INOTIFY=y
> # CONFIG_QUOTA is not set
> CONFIG_QUOTACTL=y
> CONFIG_DNOTIFY=y
> CONFIG_AUTOFS_FS=y
> # CONFIG_AUTOFS4_FS is not set
> # CONFIG_FUSE_FS is not set
>
> #
> # CD-ROM/DVD Filesystems
> #
> CONFIG_ISO9660_FS=y
> CONFIG_JOLIET=y
> # CONFIG_ZISOFS is not set
> # CONFIG_UDF_FS is not set
>
> #
> # DOS/FAT/NT Filesystems
> #
> CONFIG_FAT_FS=y
> CONFIG_MSDOS_FS=y
> CONFIG_VFAT_FS=y
> CONFIG_FAT_DEFAULT_CODEPAGE=437
> CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
> CONFIG_NTFS_FS=m
> # CONFIG_NTFS_DEBUG is not set
> # CONFIG_NTFS_RW is not set
>
> #
> # Pseudo filesystems
> #
> CONFIG_PROC_FS=y
> CONFIG_PROC_KCORE=y
> CONFIG_SYSFS=y
> CONFIG_TMPFS=y
> CONFIG_HUGETLBFS=y
> CONFIG_HUGETLB_PAGE=y
> CONFIG_RAMFS=y
> # CONFIG_RELAYFS_FS is not set
> # CONFIG_CONFIGFS_FS is not set
>
> #
> # Miscellaneous filesystems
> #
> # CONFIG_ADFS_FS is not set
> # CONFIG_AFFS_FS is not set
> # CONFIG_HFS_FS is not set
> # CONFIG_HFSPLUS_FS is not set
> # CONFIG_BEFS_FS is not set
> # CONFIG_BFS_FS is not set
> # CONFIG_EFS_FS is not set
> # CONFIG_CRAMFS is not set
> # CONFIG_VXFS_FS is not set
> # CONFIG_HPFS_FS is not set
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_SYSV_FS is not set
> # CONFIG_UFS_FS is not set
>
> #
> # Network File Systems
> #
> CONFIG_NFS_FS=y
> CONFIG_NFS_V3=y
> # CONFIG_NFS_V3_ACL is not set
> # CONFIG_NFS_V4 is not set
> # CONFIG_NFS_DIRECTIO is not set
> CONFIG_NFSD=y
> CONFIG_NFSD_V3=y
> # CONFIG_NFSD_V3_ACL is not set
> # CONFIG_NFSD_V4 is not set
> CONFIG_NFSD_TCP=y
> CONFIG_ROOT_NFS=y
> CONFIG_LOCKD=y
> CONFIG_LOCKD_V4=y
> CONFIG_EXPORTFS=y
> CONFIG_NFS_COMMON=y
> CONFIG_SUNRPC=y
> # CONFIG_RPCSEC_GSS_KRB5 is not set
> # CONFIG_RPCSEC_GSS_SPKM3 is not set
> CONFIG_SMB_FS=y
> # CONFIG_SMB_NLS_DEFAULT is not set
> # CONFIG_CIFS is not set
> # CONFIG_NCP_FS is not set
> # CONFIG_CODA_FS is not set
> # CONFIG_AFS_FS is not set
> # CONFIG_9P_FS is not set
>
> #
> # Partition Types
> #
> #CONFIG_PARTITION_ADVANCED is not set
> CONFIG_MSDOS_PARTITION=y
>
> #
> # Native Language Support
> #
> CONFIG_NLS=y
> CONFIG_NLS_DEFAULT="iso8859-1"
> CONFIG_NLS_CODEPAGE_437=y
> # CONFIG_NLS_CODEPAGE_737 is not set
> # CONFIG_NLS_CODEPAGE_775 is not set
> # CONFIG_NLS_CODEPAGE_850 is not set
> # CONFIG_NLS_CODEPAGE_852 is not set
> # CONFIG_NLS_CODEPAGE_855 is not set
> # CONFIG_NLS_CODEPAGE_857 is not set
> # CONFIG_NLS_CODEPAGE_860 is not set
> # CONFIG_NLS_CODEPAGE_861 is not set
> # CONFIG_NLS_CODEPAGE_862 is not set
> # CONFIG_NLS_CODEPAGE_863 is not set
> # CONFIG_NLS_CODEPAGE_864 is not set
> # CONFIG_NLS_CODEPAGE_865 is not set
> # CONFIG_NLS_CODEPAGE_866 is not set
> # CONFIG_NLS_CODEPAGE_869 is not set
> # CONFIG_NLS_CODEPAGE_936 is not set
> # CONFIG_NLS_CODEPAGE_950 is not set
> # CONFIG_NLS_CODEPAGE_932 is not set
> # CONFIG_NLS_CODEPAGE_949 is not set
> # CONFIG_NLS_CODEPAGE_874 is not set
> # CONFIG_NLS_ISO8859_8 is not set
> # CONFIG_NLS_CODEPAGE_1250 is not set
> # CONFIG_NLS_CODEPAGE_1251 is not set
> CONFIG_NLS_ASCII=y
> CONFIG_NLS_ISO8859_1=y
> # CONFIG_NLS_ISO8859_2 is not set
> # CONFIG_NLS_ISO8859_3 is not set
> # CONFIG_NLS_ISO8859_4 is not set
> # CONFIG_NLS_ISO8859_5 is not set
> # CONFIG_NLS_ISO8859_6 is not set
> # CONFIG_NLS_ISO8859_7 is not set
> # CONFIG_NLS_ISO8859_9 is not set
> # CONFIG_NLS_ISO8859_13 is not set
> # CONFIG_NLS_ISO8859_14 is not set
> CONFIG_NLS_ISO8859_15=y
> # CONFIG_NLS_KOI8_R is not set
> # CONFIG_NLS_KOI8_U is not set
> CONFIG_NLS_UTF8=y
>
> #
> # Instrumentation Support
> #
> # CONFIG_PROFILING is not set
> # CONFIG_KPROBES is not set
>
> #
> # Kernel hacking
> #
> #CONFIG_PRINTK_TIME is not set
> CONFIG_MAGIC_SYSRQ=y
> # CONFIG_DEBUG_KERNEL is not set
> CONFIG_LOG_BUF_SHIFT=15
>
> #
> # Security options
> #
> # CONFIG_KEYS is not set
> # CONFIG_SECURITY is not set
>
> #
> # Cryptographic options
> #
> #CONFIG_CRYPTO is not set
>
> #
> # Hardware crypto devices
> #
>
> #
> # Library routines
> #
> # CONFIG_CRC_CCITT is not set
> # CONFIG_CRC16 is not set
> CONFIG_CRC32=y
> # CONFIG_LIBCRC32C is not set
>
> lspci -vvv:
> 00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
> Subsystem: Tyan Computer Unknown device 2892
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Capabilities: [44] HyperTransport: Slave or Primary Interface
> Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
> Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC-
> TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
> Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut-
> LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
> Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+
> TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
> Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut-
> LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
> Revision ID: 1.03
> Link Frequency 0: 800MHz
> Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
> Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+
> 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
> Link Frequency 1: 200MHz
> Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
> Link Frequency Capability 1: 200MHz- 300MHz- 400MHz-
> 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE-
> CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
> Prefetchable memory behind bridge Upper: 00-00
> Bus Number: 00
> Capabilities: [e0] HyperTransport: MSI Mapping
>
> 00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3)
> Subsystem: Tyan Computer Unknown device 2892
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Region 0: I/O ports at 8c00 [size=128]
>
> 00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
> Subsystem: Tyan Computer Unknown device 2892
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Interrupt: pin A routed to IRQ 0
> Region 0: I/O ports at 1000 [size=32]
> Region 4: I/O ports at 5000 [size=64]
> Region 5: I/O ports at 5040 [size=64]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev
> a2) (prog-if 10 [OHCI])
> Subsystem: Tyan Computer Unknown device 2892
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0 (750ns min, 250ns max)
> Interrupt: pin A routed to IRQ 50
> Region 0: Memory at dd000000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev
> a3) (prog-if 20 [EHCI])
> Subsystem: Tyan Computer Unknown device 2892
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0 (750ns min, 250ns max)
> Interrupt: pin B routed to IRQ 233
> Region 0: Memory at dd001000 (32-bit, non-prefetchable) [size=256]
> Capabilities: [44] Debug port
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a2) (prog-if
> 8a [Master SecP PriP])
> Subsystem: Tyan Computer Unknown device 2892
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0 (750ns min, 250ns max)
> Region 4: I/O ports at 1400 [size=16]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller
> (rev a3) (prog-if 85 [Master SecO PriO])
> Subsystem: Tyan Computer Unknown device 2892
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0 (750ns min, 250ns max)
> Interrupt: pin A routed to IRQ 10
> Region 0: I/O ports at 1440 [size=8]
> Region 1: I/O ports at 1434 [size=4]
> Region 2: I/O ports at 1438 [size=8]
> Region 3: I/O ports at 1430 [size=4]
> Region 4: I/O ports at 1410 [size=16]
> Region 5: Memory at dd002000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller
> (rev a3) (prog-if 85 [Master SecO PriO])
> Subsystem: Tyan Computer Unknown device 2892
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0 (750ns min, 250ns max)
> Interrupt: pin A routed to IRQ 11
> Region 0: I/O ports at 1458 [size=8]
> Region 1: I/O ports at 144c [size=4]
> Region 2: I/O ports at 1450 [size=8]
> Region 3: I/O ports at 1448 [size=4]
> Region 4: I/O ports at 1420 [size=16]
> Region 5: Memory at dd003000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2)
> (prog-if 01 [Subtractive decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
> I/O behind bridge: 00002000-00002fff
> Memory behind bridge: dd100000-deffffff
> Prefetchable memory behind bridge: 88000000-880fffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
>
> 00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
> (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0, Cache Line Size 10
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: fff00000-000fffff
> Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> Capabilities: [40] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [48] Message Signalled Interrupts: 64bit+
> Queue=0/1 Enable-
> Address: 0000000000000000 Data: 0000
> Capabilities: [58] HyperTransport: MSI Mapping
> Capabilities: [80] Express Root Port (Slot+) IRQ 0
> Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
> Device: Latency L0s <512ns, L1 <4us
> Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
> Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
> Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 1
> Link: Latency L0s <512ns, L1 <4us
> Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
> Link: Speed 2.5Gb/s, Width x4
> Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
> Slot: Number 2, PowerLimit 25.000000
> Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
> Slot: AttnInd Off, PwrInd On, Power-
> Root: Correctable- Non-Fatal- Fatal- PME-
>
> 00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
> (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0, Cache Line Size 10
> Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: fff00000-000fffff
> Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> Capabilities: [40] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [48] Message Signalled Interrupts: 64bit+
> Queue=0/1 Enable-
> Address: 0000000000000000 Data: 0000
> Capabilities: [58] HyperTransport: MSI Mapping
> Capabilities: [80] Express Root Port (Slot+) IRQ 0
> Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
> Device: Latency L0s <512ns, L1 <4us
> Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
> Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
> Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s, Port 0
> Link: Latency L0s <512ns, L1 <4us
> Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
> Link: Speed 2.5Gb/s, Width x16
> Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
> Slot: Number 1, PowerLimit 75.000000
> Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
> Slot: AttnInd Off, PwrInd On, Power-
> Root: Correctable- Non-Fatal- Fatal- PME-
>
> 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8
> [Athlon64/Opteron] HyperTransport Technology Configuration
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Capabilities: [80] HyperTransport: Host or Secondary Interface
> !!! Possibly incomplete decoding
> Command: WarmRst+ DblEnd-
> Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
> <CRCErr=0
> Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
> Revision ID: 1.02
> Capabilities: [a0] HyperTransport: Host or Secondary Interface
> !!! Possibly incomplete decoding
> Command: WarmRst+ DblEnd-
> Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
> <CRCErr=0
> Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
> Revision ID: 1.02
> Capabilities: [c0] HyperTransport: Host or Secondary Interface
> !!! Possibly incomplete decoding
> Command: WarmRst+ DblEnd-
> Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
> <CRCErr=0
> Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
> Revision ID: 1.02
>
> 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8
> [Athlon64/Opteron] Address Map
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>
> 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8
> [Athlon64/Opteron] DRAM Controller
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>
> 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8
> [Athlon64/Opteron] Miscellaneous Control
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>
> 00:19.0 Host bridge: Advanced Micro Devices [AMD] K8
> [Athlon64/Opteron] HyperTransport Technology Configuration
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Capabilities: [80] HyperTransport: Host or Secondary Interface
> !!! Possibly incomplete decoding
> Command: WarmRst+ DblEnd-
> Link Control: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+
> <CRCErr=0
> Link Config: MLWI=16bit MLWO=16bit LWI=N/C LWO=N/C
> Revision ID: 1.02
> Capabilities: [a0] HyperTransport: Host or Secondary Interface
> !!! Possibly incomplete decoding
> Command: WarmRst+ DblEnd-
> Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
> <CRCErr=0
> Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
> Revision ID: 1.02
> Capabilities: [c0] HyperTransport: Host or Secondary Interface
> !!! Possibly incomplete decoding
> Command: WarmRst+ DblEnd-
> Link Control: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+
> <CRCErr=0
> Link Config: MLWI=16bit MLWO=16bit LWI=N/C LWO=N/C
> Revision ID: 1.02
>
> 00:19.1 Host bridge: Advanced Micro Devices [AMD] K8
> [Athlon64/Opteron] Address Map
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>
> 00:19.2 Host bridge: Advanced Micro Devices [AMD] K8
> [Athlon64/Opteron] DRAM Controller
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>
> 00:19.3 Host bridge: Advanced Micro Devices [AMD] K8
> [Athlon64/Opteron] Miscellaneous Control
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>
> 01:06.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev
> 27) (prog-if 00 [VGA])
> Subsystem: ATI Technologies Inc Rage XL
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping+ SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 66 (2000ns min), Cache Line Size 10
> Interrupt: pin A routed to IRQ 10
> Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=16M]
> Region 1: I/O ports at 2000 [size=256]
> Region 2: Memory at dd100000 (32-bit, non-prefetchable) [size=4K]
> [virtual] Expansion ROM at 88000000 [disabled] [size=128K]
> Capabilities: [5c] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 01:08.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro
> 100] (rev 10)
> Subsystem: Intel Corporation EtherExpress PRO/100 S Server Adapter
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 66 (2000ns min, 14000ns max), Cache Line Size 10
> Interrupt: pin A routed to IRQ 177
> Region 0: Memory at dd101000 (32-bit, non-prefetchable) [size=4K]
> Region 1: I/O ports at 2400 [size=64]
> Region 2: Memory at dd120000 (32-bit, non-prefetchable) [size=128K]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>
> 08:0a.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge
> (rev 12) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64
> Bus: primary=08, secondary=09, subordinate=09, sec-latency=96
> I/O behind bridge: 00003000-00003fff
> Memory behind bridge: df300000-df3fffff
> Prefetchable memory behind bridge: 00000000df800000-00000000dff00000
> Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> Capabilities: [a0] PCI-X bridge device
> Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv
> Status: Dev=08:0a.0 64bit+ 133MHz+ SCD- USC- SCO- SRD-
> Upstream: Capacity=14 CommitmentLimit=65535
> Downstream: Capacity=2 CommitmentLimit=65535
> Capabilities: [b8] HyperTransport: Interrupt Discovery and
> Capabilities: Configuration
> Capabilities: [c0] HyperTransport: Slave or Primary Interface
> !!! Possibly incomplete decoding
> Command: BaseUnitID=10 UnitCnt=2 MastHost- DefDir-
> Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC-
> TXO- <CRCErr=0
> Link Config 0: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
> Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+
> TXO+ <CRCErr=0
> Link Config 1: MLWI=8bit MLWO=8bit LWI=N/C LWO=N/C
> Revision ID: 1.02
>
> 08:0a.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev
> 01) (prog-if 10 [IO-APIC])
> Subsystem: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Region 0: Memory at df200000 (64-bit, non-prefetchable) [size=4K]
>
> 08:0b.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge
> (rev 12) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64
> Bus: primary=08, secondary=0a, subordinate=0a, sec-latency=96
> I/O behind bridge: 00004000-00004fff
> Memory behind bridge: df400000-df4fffff
> Prefetchable memory behind bridge: 0000000088100000-0000000088100000
> Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> Capabilities: [a0] PCI-X bridge device
> Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv
> Status: Dev=08:0b.0 64bit+ 133MHz+ SCD- USC- SCO- SRD-
> Upstream: Capacity=14 CommitmentLimit=65535
> Downstream: Capacity=2 CommitmentLimit=65535
> Capabilities: [b8] HyperTransport: Interrupt Discovery and
> Configuration
>
> 08:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev
> 01) (prog-if 10 [IO-APIC])
> Subsystem: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Region 0: Memory at df201000 (64-bit, non-prefetchable) [size=4K]
>
> 09:02.0 Fibre Channel: LSI Logic / Symbios Logic FC929X Fibre Channel
> Adapter (rev 81)
> Subsystem: LSI Logic / Symbios Logic Unknown device 10d0
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 72 (16000ns min, 2500ns max), Cache Line Size 10
> Interrupt: pin A routed to IRQ 225
> Region 0: I/O ports at 3000 [size=256]
> Region 1: Memory at df310000 (64-bit, non-prefetchable) [size=64K]
> Region 3: Memory at df300000 (64-bit, non-prefetchable) [size=64K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [58] Message Signalled Interrupts: 64bit+
> Queue=0/0 Enable-
> Address: 0000000000000000 Data: 0000
> Capabilities: [68] PCI-X non-bridge device
> Command: DPERE- ERO- RBC=2048 OST=8
> Status: Dev=ff:1f.0 64bit+ 133MHz+ SCD- USC- DC=simple
> DMMRBC=2048 DMOST=8 DMCRS=64 RSCEM- 266MHz- 533MHz-
>
> 09:02.1 Fibre Channel: LSI Logic / Symbios Logic FC929X Fibre Channel
> Adapter (rev 81)
> Subsystem: LSI Logic / Symbios Logic Unknown device 10d0
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 72 (16000ns min, 2500ns max), Cache Line Size 10
> Interrupt: pin B routed to IRQ 217
> Region 0: I/O ports at 3400 [size=256]
> Region 1: Memory at df330000 (64-bit, non-prefetchable) [size=64K]
> Region 3: Memory at df320000 (64-bit, non-prefetchable) [size=64K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [58] Message Signalled Interrupts: 64bit+
> Queue=0/0 Enable-
> Address: 0000000000000000 Data: 0000
> Capabilities: [68] PCI-X non-bridge device
> Command: DPERE- ERO- RBC=2048 OST=8
> Status: Dev=ff:1f.1 64bit+ 133MHz+ SCD- USC- DC=simple
> DMMRBC=2048 DMOST=8 DMCRS=64 RSCEM- 266MHz- 533MHz-
>
> 09:03.0 RAID bus controller: 3ware Inc 9xxx-series SATA-RAID
> Subsystem: 3ware Inc 9xxx-series SATA-RAID
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 72 (2250ns min), Cache Line Size 10
> Interrupt: pin A routed to IRQ 217
> Region 0: I/O ports at 3800 [size=256]
> Region 1: Memory at df340000 (64-bit, non-prefetchable) [size=256]
> Region 3: Memory at df800000 (64-bit, prefetchable) [size=8M]
> [virtual] Expansion ROM at df350000 [disabled] [size=64K]
> Capabilities: [48] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
> PME(D0+,D1+,D2-,D3hot+,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 0a:03.0 SCSI storage controller: Adaptec AHA-3960D / AIC-7899A U160/m (rev 01)
> Subsystem: Adaptec AHA-3960D U160/m
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 72 (10000ns min, 6250ns max), Cache Line Size 10
> Interrupt: pin A routed to IRQ 201
> BIST result: 00
> Region 0: I/O ports at 4000 [disabled] [size=256]
> Region 1: Memory at df400000 (64-bit, non-prefetchable) [size=4K]
> [virtual] Expansion ROM at 88100000 [disabled] [size=128K]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 0a:03.1 SCSI storage controller: Adaptec AHA-3960D / AIC-7899A U160/m (rev 01)
> Subsystem: Adaptec AHA-3960D U160/m
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 72 (10000ns min, 6250ns max), Cache Line Size 10
> Interrupt: pin B routed to IRQ 209
> BIST result: 00
> Region 0: I/O ports at 4400 [disabled] [size=256]
> Region 1: Memory at df401000 (64-bit, non-prefetchable) [size=4K]
> [virtual] Expansion ROM at 88120000 [disabled] [size=128K]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 0a:09.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704
> Gigabit Ethernet (rev 03)
> Subsystem: Broadcom Corporation Unknown device 1644
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (16000ns min), Cache Line Size 10
> Interrupt: pin A routed to IRQ 185
> Region 0: Memory at df420000 (64-bit, non-prefetchable) [size=64K]
> Region 2: Memory at df410000 (64-bit, non-prefetchable) [size=64K]
> [virtual] Expansion ROM at 88140000 [disabled] [size=64K]
> Capabilities: [40] PCI-X non-bridge device
> Command: DPERE- ERO- RBC=512 OST=1
> Status: Dev=ff:1f.0 64bit+ 133MHz+ SCD- USC- DC=simple
> DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
> Capabilities: [48] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable+ DSel=0 DScale=1 PME-
> Capabilities: [50] Vital Product Data
> Capabilities: [58] Message Signalled Interrupts: 64bit+
> Queue=0/3 Enable-
> Address: 1a72e12521540314 Data: 0128
>
> 0a:09.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704
> Gigabit Ethernet (rev 03)
> Subsystem: Broadcom Corporation Unknown device 1644
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (16000ns min), Cache Line Size 10
> Interrupt: pin B routed to IRQ 193
> Region 0: Memory at df440000 (64-bit, non-prefetchable) [size=64K]
> Region 2: Memory at df430000 (64-bit, non-prefetchable) [size=64K]
> [virtual] Expansion ROM at 88150000 [disabled] [size=64K]
> Capabilities: [40] PCI-X non-bridge device
> Command: DPERE- ERO+ RBC=2048 OST=1
> Status: Dev=ff:1f.1 64bit+ 133MHz+ SCD- USC- DC=simple
> DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
> Capabilities: [48] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=1 PME-
> Capabilities: [50] Vital Product Data
> Capabilities: [58] Message Signalled Interrupts: 64bit+
> Queue=0/3 Enable-
> Address: 2000274248c02928 Data: 0006
>
> /proc/cpuinfo:
>
> processor : 0
> vendor_id : AuthenticAMD
> cpu family : 15
> model : 5
> model name : AMD Opteron(tm) Processor 246
> stepping : 10
> cpu MHz : 2000.000
> cache size : 1024 KB
> fpu : yes
> fpu_exception : yes
> cpuid level : 1
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
> mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext lm
> 3dnowext 3dnow
> bogomips : 4025.03
> TLB size : 1024 4K pages
> clflush size : 64
> cache_alignment : 64
> address sizes : 40 bits physical, 48 bits virtual
> power management: ts fid vid ttp
>
> processor : 1
> vendor_id : AuthenticAMD
> cpu family : 15
> model : 5
> model name : AMD Opteron(tm) Processor 246
> stepping : 10
> cpu MHz : 2000.000
> cache size : 1024 KB
> fpu : yes
> fpu_exception : yes
> cpuid level : 1
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
> mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext lm
> 3dnowext 3dnow
> bogomips : 4018.81
> TLB size : 1024 4K pages
> clflush size : 64
> cache_alignment : 64
> address sizes : 40 bits physical, 48 bits virtual
> power management: ts fid vid ttp
> -
--
Kai
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [OOPS] amrestore dies in kmem_cache_free 2.6.16.18 - cannot restore backups!
2006-05-25 20:02 ` Kai Makisara
@ 2006-05-27 9:34 ` Kai Makisara
2006-05-28 22:04 ` James Lamanna
2006-05-30 15:17 ` James Lamanna
0 siblings, 2 replies; 8+ messages in thread
From: Kai Makisara @ 2006-05-27 9:34 UTC (permalink / raw)
To: James Lamanna; +Cc: linux-kernel, linux-scsi, Mike Christie, Bryan Holty
On Thu, 25 May 2006, Kai Makisara wrote:
> I am adding linux-scsi to recipients (and quoting the whole message for
> readers of that list).
>
> On Tue, 23 May 2006, James Lamanna wrote:
>
> > So I was able to recreate this problem on a vanilla 2.6.16.18 with the
> > following oops..
> > I'd say this is a serious regression since I cannot restore backups
> > anymore (I could with 2.6.14.x, but that kernel series had other
> > issues...)
> >
> > amrestore does manage to read 1 32k block from tape before dying.
> >
> > Any help would be greatly appreciated.
> >
> I have tried 'amrestore' on my machine with 2.6.16.18 but was not able to
> reproduce the problem.
OK. Now I think I have found something, thanks to Mike Christie's reminder
yesterday in another thread that the patch at the end of this message has
not been merged into 2.6.16 (and 2.6.17-rcx) ;-)
I did strace amrestore here and found out that the tape buffer addresses
were not aligned at 512 byte boundaries:
read(0x3, 0x523380, 0x8000) = 0x8000
read(0x3, 0x51b370, 0x8000) = 0x8000
This meant that st used the internal driver buffer aligned at page
boundary as input to scsi_execute_async and the problem fixed by the patch
did not occur.
(BTW, I hate this. The SCSI HBA would be perfectly capable to do direct
transfers from/to these addresses but the default alignment restrictions
prevent this and the HBA driver does not modify the defaults.)
Next I made a test program reading to a buffer with start address I could
control. When the offset from page boundary was 0 or not a multiple of
512, no errors occurred. When I set the offset to 512, I got the following
OOPS (this is from 2.6.17-rc5 with CONFIG_DEBUG_SLAB set but the
similarity is obvious):
kfree_debugcheck: out of range ptr fffffffffffffff8h.
----------- [cut here ] --------- [please bite here ] ---------
Kernel BUG at mm/slab.c:2590
invalid opcode: 0000 [1]
CPU 0
Modules linked in: st snd_seq snd_pcm_oss snd_mixer_oss w83627hf hwmon_vid
i2c_isa snd_via82xx snd_ac97_codec snd_ac97_bus snd_pcm snd_timer
snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device snd i2c_viapro
i2c_core ohci1394 ieee1394
Pid: 11174, comm: talign Not tainted 2.6.17-rc5-g705af309 #7
RIP: 0010:[<ffffffff8025dd2a>] <ffffffff8025dd2a>{kfree_debugcheck+70}
RSP: 0018:ffff810011057c68 EFLAGS: 00010096
RAX: 0000000000000039 RBX: fffffffffffffff8 RCX: ffffffff80558f98
RDX: ffff810039dbae60 RSI: 0000000000000046 RDI: ffffffff80558f80
RBP: ffff81003ff991c0 R08: ffffffff80558f98 R09: 0000000000000020
R10: 0000000000000010 R11: 0000000000000010 R12: fffffffffffffff8
R13: 0000000000000246 R14: ffffffff80266d70 R15: ffff8100390f28e0
FS: 00002ba29f0aeb00(0000) GS:ffffffff806c8000(0000)
knlGS:00000000563b80c0
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00002ba29eed407b CR3: 000000000cdbb000 CR4: 00000000000006e0
Process talign (pid: 11174, threadinfo ffff810011056000, task
ffff810039dbae60)
Stack: 0000000000000000 ffffffff8025e634 0000000000000000 ffff81003ff991c0
ffff810001fee098 0000000000000246 0000000000000200 ffffffff8025f2a8
ffff81003ff991c0 ffff81000b94e8b0
Call Trace: <ffffffff8025e634>{cache_free_debugcheck+35}
<ffffffff8025f2a8>{kmem_cache_free+41}
<ffffffff80266d70>{bio_free+48}
<ffffffff803fa0e5>{scsi_execute_async+374}
<ffffffff880edec7>{:st:st_do_scsi+504}
<ffffffff880ed045>{:st:st_sleep_done+0}
<ffffffff880ed89e>{:st:setup_buffering+516}
<ffffffff880f17cd>{:st:st_read+845}
<ffffffff8022381d>{__wake_up+54}
<ffffffff80262af3>{vfs_read+168} <ffffffff802634b0>{sys_read+69}
<ffffffff802095de>{system_call+126}
Code: 0f 0b 68 37 bd 4e 80 c2 1e 0a 48 b8 ff ff ff 7f ff ff ff ff
RIP <ffffffff8025dd2a>{kfree_debugcheck+70} RSP <ffff810011057c68>
Next thing was to patch 2.6.16.18 with the patch at the end: No more
oopses with any alignment.
James, does this fix your problem ?
Kai
--------------------------------8<------------------------------------------
Excerpt from a message from Brian Holty to linux-scsi and linux-kernel on
Wed, 22 Mar 2006 06:35:39:
...
Based on above, I think the most intuitive fix would be the offset addition of
the first entry to the initialization of nr_pages.
Without this change, for instance, with 4K io's every sg io that is
dma_aligned for direct io, but not page aligned will cause slab corruption
and an oops
I am able to run a number of tests with sg that cause the boundary to be
crossed, and with this fix there is no slab corruption or data corruption.
Thanks Dan, I had been hunting for this for a couple of days!!
Thoughts??
Signed-off-by: Bryan Holty <lgeek@frontiernet.net>
--- a/drivers/scsi/scsi_lib.c 2006-03-03 13:17:22.000000000 -0600
+++ b/drivers/scsi/scsi_lib.c 2006-03-22 06:09:09.669599539 -0600
@@ -368,7 +368,7 @@
int nsegs, unsigned bufflen, gfp_t gfp)
{
struct request_queue *q = rq->q;
- int nr_pages = (bufflen + PAGE_SIZE - 1) >> PAGE_SHIFT;
+ int nr_pages = (bufflen + sgl[0].offset + PAGE_SIZE - 1) >> PAGE_SHIFT;
unsigned int data_len = 0, len, bytes, off;
struct page *page;
struct bio *bio = NULL;
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [OOPS] amrestore dies in kmem_cache_free 2.6.16.18 - cannot restore backups!
2006-05-27 9:34 ` Kai Makisara
@ 2006-05-28 22:04 ` James Lamanna
2006-05-30 15:17 ` James Lamanna
1 sibling, 0 replies; 8+ messages in thread
From: James Lamanna @ 2006-05-28 22:04 UTC (permalink / raw)
To: Kai Makisara; +Cc: linux-kernel, linux-scsi, Mike Christie, Bryan Holty
On 5/27/06, Kai Makisara <Kai.Makisara@kolumbus.fi> wrote:
[SNIP]
>
>
> Next thing was to patch 2.6.16.18 with the patch at the end: No more
> oopses with any alignment.
>
> James, does this fix your problem ?
Kai-
I'll try and see if I can test this on Tuesday.
I've been traveling for the last few days.
Thanks for your help!
-- James
>
> Kai
>
> --------------------------------8<------------------------------------------
>
> Excerpt from a message from Brian Holty to linux-scsi and linux-kernel on
> Wed, 22 Mar 2006 06:35:39:
>
> ...
> Based on above, I think the most intuitive fix would be the offset addition of
> the first entry to the initialization of nr_pages.
>
> Without this change, for instance, with 4K io's every sg io that is
> dma_aligned for direct io, but not page aligned will cause slab corruption
> and an oops
>
> I am able to run a number of tests with sg that cause the boundary to be
> crossed, and with this fix there is no slab corruption or data corruption.
>
> Thanks Dan, I had been hunting for this for a couple of days!!
>
> Thoughts??
>
> Signed-off-by: Bryan Holty <lgeek@frontiernet.net>
>
> --- a/drivers/scsi/scsi_lib.c 2006-03-03 13:17:22.000000000 -0600
> +++ b/drivers/scsi/scsi_lib.c 2006-03-22 06:09:09.669599539 -0600
> @@ -368,7 +368,7 @@
> int nsegs, unsigned bufflen, gfp_t gfp)
> {
> struct request_queue *q = rq->q;
> - int nr_pages = (bufflen + PAGE_SIZE - 1) >> PAGE_SHIFT;
> + int nr_pages = (bufflen + sgl[0].offset + PAGE_SIZE - 1) >> PAGE_SHIFT;
> unsigned int data_len = 0, len, bytes, off;
> struct page *page;
> struct bio *bio = NULL;
>
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [OOPS] amrestore dies in kmem_cache_free 2.6.16.18 - cannot restore backups!
2006-05-27 9:34 ` Kai Makisara
2006-05-28 22:04 ` James Lamanna
@ 2006-05-30 15:17 ` James Lamanna
1 sibling, 0 replies; 8+ messages in thread
From: James Lamanna @ 2006-05-30 15:17 UTC (permalink / raw)
To: Kai Makisara; +Cc: linux-kernel, linux-scsi, Mike Christie, Bryan Holty
On 5/27/06, Kai Makisara <Kai.Makisara@kolumbus.fi> wrote:
> On Thu, 25 May 2006, Kai Makisara wrote:
>
> > I am adding linux-scsi to recipients (and quoting the whole message for
> > readers of that list).
> >
> > On Tue, 23 May 2006, James Lamanna wrote:
> >
> > > So I was able to recreate this problem on a vanilla 2.6.16.18 with the
> > > following oops..
> > > I'd say this is a serious regression since I cannot restore backups
> > > anymore (I could with 2.6.14.x, but that kernel series had other
> > > issues...)
> > >
> > > amrestore does manage to read 1 32k block from tape before dying.
> > >
> > > Any help would be greatly appreciated.
> > >
> > I have tried 'amrestore' on my machine with 2.6.16.18 but was not able to
> > reproduce the problem.
>
> OK. Now I think I have found something, thanks to Mike Christie's reminder
> yesterday in another thread that the patch at the end of this message has
> not been merged into 2.6.16 (and 2.6.17-rcx) ;-)
[SNIP]
>
> Next thing was to patch 2.6.16.18 with the patch at the end: No more
> oopses with any alignment.
>
> James, does this fix your problem ?
Kai-
Yes, the patch below does fix my problem and lets amrestore run.
Of course I still have the sense data problem, but I think I'm going
to replace some cables and terminators :)
So I would say that this should be included in 2.6.17, and perhaps a
2.6.16.19? :)
Thanks again!
>
> Kai
-- James
>
> --------------------------------8<------------------------------------------
>
> Excerpt from a message from Brian Holty to linux-scsi and linux-kernel on
> Wed, 22 Mar 2006 06:35:39:
>
> ...
> Based on above, I think the most intuitive fix would be the offset addition of
> the first entry to the initialization of nr_pages.
>
> Without this change, for instance, with 4K io's every sg io that is
> dma_aligned for direct io, but not page aligned will cause slab corruption
> and an oops
>
> I am able to run a number of tests with sg that cause the boundary to be
> crossed, and with this fix there is no slab corruption or data corruption.
>
> Thanks Dan, I had been hunting for this for a couple of days!!
>
> Thoughts??
>
> Signed-off-by: Bryan Holty <lgeek@frontiernet.net>
>
> --- a/drivers/scsi/scsi_lib.c 2006-03-03 13:17:22.000000000 -0600
> +++ b/drivers/scsi/scsi_lib.c 2006-03-22 06:09:09.669599539 -0600
> @@ -368,7 +368,7 @@
> int nsegs, unsigned bufflen, gfp_t gfp)
> {
> struct request_queue *q = rq->q;
> - int nr_pages = (bufflen + PAGE_SIZE - 1) >> PAGE_SHIFT;
> + int nr_pages = (bufflen + sgl[0].offset + PAGE_SIZE - 1) >> PAGE_SHIFT;
> unsigned int data_len = 0, len, bytes, off;
> struct page *page;
> struct bio *bio = NULL;
>
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2006-05-30 15:17 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-05-26 4:27 [OOPS] amrestore dies in kmem_cache_free 2.6.16.18 - cannot restore backups! Chuck Ebbert
2006-05-27 15:22 ` Mike Christie
-- strict thread matches above, loose matches on Subject: below --
2006-05-24 1:24 James Lamanna
2006-05-24 7:38 ` Pekka Enberg
2006-05-25 20:02 ` Kai Makisara
2006-05-27 9:34 ` Kai Makisara
2006-05-28 22:04 ` James Lamanna
2006-05-30 15:17 ` James Lamanna
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox