Re: Dual via-rhine on EPIA PD6000E

[Wojciech Kromer <wojciech.kromer@dgt.com.pl>]

> There is a difference between ioports and iomem.
>
>   
Of course I know, but look at this:

# cat /proc/ioports
d000-d0ff : 0000:00:0f.0
  d000-d0ff : via-rhine
e400-e4ff : 0000:00:12.0
  e400-e4ff : via-rhine

# cat /proc/iomem  
de000000-de0000ff : 0000:00:0f.0
  de000000-de0000ff : via-rhine
de002000-de0020ff : 0000:00:12.0
  de002000-de0020ff : via-rhine

from ifoconfig:
eth0: Interrupt:10 Base address: *0xe000*
eth1: Interrupt:11 Base address: *0x4000* <<is it I/O or mem ???


> "Not working" is vague. No packet transmission even though the link is 
> active?
>
>   
#mii-tool
eth0: negotiated 100baseTx-FD flow-control, link ok
eth1: negotiated 100baseTx-FD flow-control, link ok

Huh! Now it started. But it's first time from four days. Before it i had 
no frames received.