* Need pci=conf1 to have my PCI slots working
@ 2006-06-07 19:55 Marcelo Feitoza Parisi
2006-06-07 22:45 ` Greg KH
0 siblings, 1 reply; 2+ messages in thread
From: Marcelo Feitoza Parisi @ 2006-06-07 19:55 UTC (permalink / raw)
To: linux-kernel
Motherboard: Asus P5VDC-MX
Northbridge: VIA P4M800 PRO
Southbridge: VIA VT8251
Kernel Version: 2.6.15-23-386 (Ubuntu Dapper Drake original kernel)
My PCI cards where not being showed on lspci and lshw. Tried to change
cards, change slots, nothing worked. So someone told me to try pci=conf1
in my boot, and it worked.He then told me that you people might be
interested in hearing that was necessary and then cowardly ran off.
Best regards
--
Marcelo Feitoza Parisi
marcelo@feitoza.com.br
http://marcelo.feitoza.com.br/
Key ID: 0x42A42C9A
Key fingerprint: ADDE EEE7 57D9 FB45 2605 5A03 54DA 3079 42A4 2C9A
Key: http://marcelo.feitoza.com.br/GnuPG/chave_publica.asc
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Need pci=conf1 to have my PCI slots working
2006-06-07 19:55 Need pci=conf1 to have my PCI slots working Marcelo Feitoza Parisi
@ 2006-06-07 22:45 ` Greg KH
0 siblings, 0 replies; 2+ messages in thread
From: Greg KH @ 2006-06-07 22:45 UTC (permalink / raw)
To: Marcelo Feitoza Parisi; +Cc: linux-kernel
On Wed, Jun 07, 2006 at 04:55:31PM -0300, Marcelo Feitoza Parisi wrote:
> Motherboard: Asus P5VDC-MX
> Northbridge: VIA P4M800 PRO
> Southbridge: VIA VT8251
> Kernel Version: 2.6.15-23-386 (Ubuntu Dapper Drake original kernel)
>
> My PCI cards where not being showed on lspci and lshw. Tried to change
> cards, change slots, nothing worked. So someone told me to try pci=conf1
> in my boot, and it worked.He then told me that you people might be
> interested in hearing that was necessary and then cowardly ran off.
Can you try the latest 2.6.17-rc6 kernel? This should hopefully "just
work" there.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2006-06-07 22:48 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-06-07 19:55 Need pci=conf1 to have my PCI slots working Marcelo Feitoza Parisi
2006-06-07 22:45 ` Greg KH
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox