From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932723AbWGALIm (ORCPT ); Sat, 1 Jul 2006 07:08:42 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932728AbWGALIm (ORCPT ); Sat, 1 Jul 2006 07:08:42 -0400 Received: from tornado.reub.net ([202.89.145.182]:19933 "EHLO tornado.reub.net") by vger.kernel.org with ESMTP id S932723AbWGALIl convert rfc822-to-8bit (ORCPT ); Sat, 1 Jul 2006 07:08:41 -0400 Message-ID: <44A657B8.7040702@reub.net> Date: Sat, 01 Jul 2006 23:08:40 +1200 From: Reuben Farrelly User-Agent: Thunderbird 3.0a1 (Windows/20060627) MIME-Version: 1.0 To: Andrew Morton CC: linux-kernel@vger.kernel.org Subject: Re: 2.6.17-mm5 References: <20060701033524.3c478698.akpm@osdl.org> In-Reply-To: <20060701033524.3c478698.akpm@osdl.org> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8BIT Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org On 1/07/2006 10:35 p.m., Andrew Morton wrote: > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.17/2.6.17-mm5/ > > > Nothing very exciting here - a few buggy patches were fixed or dropped. Ouch: Bootdata ok (command line is ro root=/dev/md0 panic=60 console=ttyS0,57600 single) Linux version 2.6.17-mm5 (root@tornado.reub.net) (gcc version 4.1.1 20060629 (Red Hat 4.1.1-6)) #1 SMP Sat Jul 1 22:59:00 NZST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f670000 (usable) BIOS-e820: 000000003f670000 - 000000003f6e9000 (ACPI NVS) BIOS-e820: 000000003f6e9000 - 000000003f6ec000 (usable) BIOS-e820: 000000003f6ec000 - 000000003f6ff000 (ACPI data) BIOS-e820: 000000003f6ff000 - 000000003f700000 (usable) DMI 2.3 present. ACPI: PM-Timer IO Port: 0x408 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Setting APIC routing to flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 40000000 (gap: 3f700000:c0900000) Built 1 zonelists. Total pages: 254547 Kernel command line: ro root=/dev/md0 panic=60 console=ttyS0,57600 single Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Checking aperture... Memory: 1015044k/1039360k available (2569k kernel code, 22788k reserved, 1660k data, 216k init) Calibrating delay using timer specific routine.. 6006.40 BogoMIPS (lpj=12012800) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM1) Freeing SMP alternatives: 28k freed ACPI: Core revision 20060623 Using local APIC timer interrupts. result 12500450 Detected 12.500 MHz APIC timer. Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 5999.87 BogoMIPS (lpj=11999755) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU1: Thermal monitoring enabled (TM1) Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03 Brought up 2 CPUs testing NMI watchdog ... OK. time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer. time.c: Detected 3000.123 MHz processor. migration_cost=4 checking if image is initramfs... it is Freeing initrd memory: 877k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *9 10 11 12) Intel 82802 RNG detected SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz PCI-GART: No AMD northbridge found. PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:1c.0 IO window: 2000-2fff MEM window: 48000000-480fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.2 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.3 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.4 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.5 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: 1000-1fff MEM window: disabled. PREFETCH window: disabled. NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) audit(1151751831.012:1): initialized SELinux: Registering netfilter hooks Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered (default) assign_interrupt_mode Found MSI capability assign_interrupt_mode Found MSI capability assign_interrupt_mode Found MSI capability assign_interrupt_mode Found MSI capability assign_interrupt_mode Found MSI capability ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Getting cpuindex for acpiid 0x3 ACPI: Getting cpuindex for acpiid 0x4 Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled ˙serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 19 (level, low) -> IRQ 19 0000:06:03.0: ttyS1 at I/O 0x1000 (irq = 19) is a 16550A 0000:06:03.0: ttyS2 at I/O 0x1008 (irq = 19) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 4 RAM disks of 16384K size 1024 blocksize Intel(R) PRO/1000 Network Driver - version 7.0.38-k4-NAPI Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 e1000: 0000:01:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:13:20:60:b4:23 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH7: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 ICH7: chipset revision 1 ICH7: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x30b0-0x30b7, BIOS settings: hda:DMA, hdb:pio hda: PIONEER DVD-RW DVR-111D, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Unable to handle kernel NULL pointer dereference at 00000000000000ce RIP: [] pci_msi_supported+0x37/0x4b PGD 0 Oops: 0000 [1] SMP last sysfs file: CPU 0 Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.17-mm5 #1 RIP: 0010:[] [] pci_msi_supported+0x37/0x4b RSP: 0000:ffff81003f601b88 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff81003ec659c8 RCX: 00000000481a0000 RDX: 00000000481a03ff RSI: ffff810037f9aa80 RDI: ffff81003ec65800 RBP: ffff81003f601b88 R08: 0000000000000000 R09: 0000000000000000 R10: ffff810037f9aa80 R11: 0000000000000040 R12: ffff81003ec65800 R13: 0000000000000000 R14: ffffffff805a0620 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffffff80685000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00000000000000ce CR3: 0000000000201000 CR4: 00000000000006e0 Process swapper (pid: 1, threadinfo ffff81003f600000, task ffff810001fb8740) Stack: ffff81003f601bf8 ffffffff80364909 ffff81003f601bc8 ffffffff8035dbee 0000000000000000 0000000000000005 ffffffff804c8166 ffff81003ec65800 ffff81003f601bf8 ffff81003ec659c8 ffff81003ec65800 0000000000000000 Call Trace: [] pci_enable_msi+0x19/0x2f2 [] pci_request_region+0xce/0x180 [] ahci_init_one+0x88/0x93a [] wait_for_completion+0xb2/0x112 [] default_wake_function+0x0/0xf [] call_usermodehelper_keys+0xd4/0xe8 [] __call_usermodehelper+0x0/0x64 [] kobject_get+0x1a/0x24 [] pci_device_probe+0x4d/0x78 [] driver_probe_device+0x5c/0xb4 [] __driver_attach+0x67/0xb9 [] __driver_attach+0x0/0xb9 [] bus_for_each_dev+0x4f/0x79 [] driver_attach+0x1c/0x1e [] bus_add_driver+0x7a/0x143 [] driver_register+0x9f/0xa6 [] wake_up_process+0x10/0x12 [] __pci_register_driver+0x59/0x7e [] ahci_init+0x12/0x14 [] init+0x14e/0x2c2 [] schedule_tail+0x37/0x9e [] child_rip+0x8/0x12 [] init+0x0/0x2c2 [] child_rip+0x0/0x12 Code: f6 80 ce 00 00 00 01 75 04 31 c0 eb 05 b8 ff ff ff ff 5d c3 RIP [] pci_msi_supported+0x37/0x4b RSP CR2: 00000000000000ce <0>Kernel panic - not syncing: Attempted to kill init! <0>Rebooting in 60 seconds.. Hardware is listed at http://www.reub.net/files/kernel/system-hardware Reuben