[PATCH 1/1] Add efi e820 memory mapping on x86 [try #1]

[Edgar Hucek <hostmaster@ed-soft.at>]

This Patch add an efi e820 memory mapping.

Signed-off-by: Edgar Hucek <hostmaster@ed-soft.at>


diff -uNr linux-2.6.18-rc2/arch/i386/kernel/setup.c
linux-2.6.18-rc2.mactel/arch/i386/kernel/setup.c
--- linux-2.6.18-rc2/arch/i386/kernel/setup.c    2006-07-16
10:38:10.000000000 +0200
+++ linux-2.6.18-rc2.mactel/arch/i386/kernel/setup.c    2006-07-16
10:16:12.000000000 +0200
@@ -414,19 +414,17 @@
 {
     int x;
 
-    if (!efi_enabled) {
-               x = e820.nr_map;
+    x = e820.nr_map;
 
-        if (x == E820MAX) {
-            printk(KERN_ERR "Ooops! Too many entries in the memory
map!\n");
-            return;
-        }
-
-        e820.map[x].addr = start;
-        e820.map[x].size = size;
-        e820.map[x].type = type;
-        e820.nr_map++;
+    if (x == E820MAX) {
+        printk(KERN_ERR "Ooops! Too many entries in the memory map!\n");
+        return;
     }
+
+    e820.map[x].addr = start;
+    e820.map[x].size = size;
+    e820.map[x].type = type;
+    e820.nr_map++;
 } /* add_memory_region */
 
 #define E820_DEBUG    1
@@ -1431,6 +1429,59 @@
 #endif
 
 /*
+ * Make a e820 memory map
+ */
+void __init efi_init_e820_map(void)
+{
+    efi_memory_desc_t *md;
+    unsigned long long start = 0;
+    unsigned long long end = 0;
+    unsigned long long size = 0;
+    void *p;
+
+    e820.nr_map = 0;
+
+    for (p = memmap.map; p < memmap.map_end;
+        p += memmap.desc_size) {
+        md = p;
+        switch (md->type) {
+        case EFI_ACPI_RECLAIM_MEMORY:
+            add_memory_region(md->phys_addr, md->num_pages <<
EFI_PAGE_SHIFT, E820_ACPI);
+            break;
+        case EFI_RUNTIME_SERVICES_CODE:
+        case EFI_RUNTIME_SERVICES_DATA:
+        case EFI_RESERVED_TYPE:
+        case EFI_MEMORY_MAPPED_IO:
+        case EFI_MEMORY_MAPPED_IO_PORT_SPACE:
+        case EFI_UNUSABLE_MEMORY:
+            add_memory_region(md->phys_addr, md->num_pages <<
EFI_PAGE_SHIFT, E820_RESERVED);
+            break;
+        case EFI_LOADER_CODE:
+        case EFI_LOADER_DATA:
+        case EFI_BOOT_SERVICES_CODE:
+        case EFI_BOOT_SERVICES_DATA:
+        case EFI_CONVENTIONAL_MEMORY:
+            start = md->phys_addr;
+            size = md->num_pages << EFI_PAGE_SHIFT;
+            end = start + size;
+            if (start < 0x100000ULL && end > 0xA0000ULL) {
+                if (start < 0xA0000ULL)
+                    add_memory_region(start, 0xA0000ULL-start, E820_RAM);
+                if (end <= 0x100000ULL)
+                    continue;
+                start = 0x100000ULL;
+                size = end - start;
+            }
+            add_memory_region(start, size, E820_RAM);
+            break;
+        case EFI_ACPI_MEMORY_NVS:
+            add_memory_region(md->phys_addr, md->num_pages <<
EFI_PAGE_SHIFT, E820_NVS);
+            break;
+        }
+    }
+}
+
+/*
  * Determine if we were loaded by an EFI loader.  If so, then we have
also been
  * passed the efi memmap, systab, etc., so we should use these data
structures
  * for initialization.  Note, the efi init code path is determined by the
@@ -1478,9 +1529,11 @@
     rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0);
 #endif
     ARCH_SETUP
-    if (efi_enabled)
+    if (efi_enabled) {
         efi_init();
-    else {
+        efi_init_e820_map();
+        print_memory_map("BIOS-EFI");
+    } else {
         printk(KERN_INFO "BIOS-provided physical RAM map:\n");
         print_memory_map(machine_specific_memory_setup());
     }