From: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
To: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Cc: Andrew Morton <akpm@osdl.org>,
James Bottomley <James.Bottomley@steeleye.com>,
linux-scsi@vger.kernel.org, LKML <linux-kernel@vger.kernel.org>,
GOTO Masanori <gotom@debian.or.jp>
Subject: Re: [RFC] [PATCH 7/9] drivers/scsi/nsp32.c Removal of old scsi code
Date: Sat, 12 Aug 2006 23:03:06 +0200 [thread overview]
Message-ID: <44DE420A.4050008@gmail.com> (raw)
In-Reply-To: <44DE3E5E.3020605@gmail.com>
Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
diff -uprN -X linux-work/Documentation/dontdiff linux-work-clean/drivers/scsi/nsp32.c linux-work/drivers/scsi/nsp32.c
--- linux-work-clean/drivers/scsi/nsp32.c 2006-08-12 02:15:32.000000000 +0200
+++ linux-work/drivers/scsi/nsp32.c 2006-08-12 20:43:46.000000000 +0200
@@ -50,10 +50,6 @@
#include <scsi/scsi_host.h>
#include <scsi/scsi_ioctl.h>
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0))
-# include <linux/blk.h>
-#endif
-
#include "nsp32.h"
@@ -200,17 +196,9 @@ static int __init init_nsp32 (void)
static void __exit exit_nsp32 (void);
/* struct struct scsi_host_template */
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
static int nsp32_proc_info (struct Scsi_Host *, char *, char **, off_t, int, int);
-#else
-static int nsp32_proc_info (char *, char **, off_t, int, int, int);
-#endif
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
static int nsp32_detect (struct pci_dev *pdev);
-#else
-static int nsp32_detect (struct scsi_host_template *);
-#endif
static int nsp32_queuecommand(struct scsi_cmnd *,
void (*done)(struct scsi_cmnd *));
static const char *nsp32_info (struct Scsi_Host *);
@@ -297,15 +285,7 @@ static struct scsi_host_template nsp32_t
.eh_abort_handler = nsp32_eh_abort,
.eh_bus_reset_handler = nsp32_eh_bus_reset,
.eh_host_reset_handler = nsp32_eh_host_reset,
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,74))
- .detect = nsp32_detect,
- .release = nsp32_release,
-#endif
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,2))
- .use_new_eh_code = 1,
-#else
/* .highmem_io = 1, */
-#endif
};
#include "nsp32_io.h"
@@ -1212,12 +1192,8 @@ static irqreturn_t do_nsp32_isr(int irq,
int ret;
int handled = 0;
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
struct Scsi_Host *host = data->Host;
spin_lock_irqsave(host->host_lock, flags);
-#else
- spin_lock_irqsave(&io_request_lock, flags);
-#endif
/*
* IRQ check, then enable IRQ mask
@@ -1481,11 +1457,7 @@ static irqreturn_t do_nsp32_isr(int irq,
nsp32_write2(base, IRQ_CONTROL, 0);
out2:
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
spin_unlock_irqrestore(host->host_lock, flags);
-#else
- spin_unlock_irqrestore(&io_request_lock, flags);
-#endif
nsp32_dbg(NSP32_DEBUG_INTR, "exit");
@@ -1501,27 +1473,18 @@ static irqreturn_t do_nsp32_isr(int irq,
} \
} while(0)
static int nsp32_proc_info(
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
struct Scsi_Host *host,
-#endif
char *buffer,
char **start,
off_t offset,
int length,
-#if !(LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
- int hostno,
-#endif
int inout)
{
char *pos = buffer;
int thislength;
unsigned long flags;
nsp32_hw_data *data;
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
int hostno;
-#else
- struct Scsi_Host *host;
-#endif
unsigned int base;
unsigned char mode_reg;
int id, speed;
@@ -1532,15 +1495,7 @@ static int nsp32_proc_info(
return -EINVAL;
}
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
hostno = host->host_no;
-#else
- /* search this HBA host */
- host = scsi_host_hn_get(hostno);
- if (host == NULL) {
- return -ESRCH;
- }
-#endif
data = (nsp32_hw_data *)host->hostdata;
base = host->io_port;
@@ -2675,17 +2630,11 @@ static void nsp32_sack_negate(nsp32_hw_d
* 0x900-0xbff: (map same 0x800-0x8ff I/O port image repeatedly)
* 0xc00-0xfff: CardBus status registers
*/
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
+
#define DETECT_OK 0
#define DETECT_NG 1
#define PCIDEV pdev
static int nsp32_detect(struct pci_dev *pdev)
-#else
-#define DETECT_OK 1
-#define DETECT_NG 0
-#define PCIDEV (data->Pci)
-static int nsp32_detect(struct scsi_host_template *sht)
-#endif
{
struct Scsi_Host *host; /* registered host structure */
struct resource *res;
@@ -2698,11 +2647,8 @@ static int nsp32_detect(struct scsi_host
/*
* register this HBA as SCSI device
*/
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
host = scsi_host_alloc(&nsp32_template, sizeof(nsp32_hw_data));
-#else
- host = scsi_register(sht, sizeof(nsp32_hw_data));
-#endif
+
if (host == NULL) {
nsp32_msg (KERN_ERR, "failed to scsi register");
goto err;
@@ -2720,9 +2666,6 @@ static int nsp32_detect(struct scsi_host
host->unique_id = data->BaseAddress;
host->n_io_port = data->NumAddress;
host->base = (unsigned long)data->MmioAddress;
-#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2,5,63))
- scsi_set_pci_device(host, PCIDEV);
-#endif
data->Host = host;
spin_lock_init(&(data->Lock));
@@ -2884,14 +2827,13 @@ static int nsp32_detect(struct scsi_host
goto free_irq;
}
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
ret = scsi_add_host(host, &PCIDEV->dev);
if (ret) {
nsp32_msg(KERN_ERR, "failed to add scsi host");
goto free_region;
}
scsi_scan_host(host);
-#endif
+
pci_set_drvdata(PCIDEV, host);
return DETECT_OK;
@@ -3525,12 +3467,7 @@ static int __devinit nsp32_probe(struct
data->MmioLength = pci_resource_len (pdev, 1);
pci_set_master(pdev);
-
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
ret = nsp32_detect(pdev);
-#else
- ret = scsi_register_host(&nsp32_template);
-#endif
nsp32_msg(KERN_INFO, "irq: %i mmio: %p+0x%lx slot: %s model: %s",
pdev->irq,
@@ -3545,21 +3482,15 @@ static int __devinit nsp32_probe(struct
static void __devexit nsp32_remove(struct pci_dev *pdev)
{
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
struct Scsi_Host *host = pci_get_drvdata(pdev);
-#endif
nsp32_dbg(NSP32_DEBUG_REGISTER, "enter");
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
scsi_remove_host(host);
nsp32_release(host);
scsi_host_put(host);
-#else
- scsi_unregister_host(&nsp32_template);
-#endif
}
next prev parent reply other threads:[~2006-08-12 21:02 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <44DE3E5E.3020605@gmail.com>
2006-08-12 21:01 ` [RFC] [PATCH 1/9] drivers/scsi/dpt/dpti_i2o.h Removal of old scsi code Michal Piotrowski
2006-08-12 21:02 ` [RFC] [PATCH 2/9] drivers/scsi/gdth.c " Michal Piotrowski
2006-08-12 21:02 ` [RFC] [PATCH 3/9] drivers/scsi/gdth.h " Michal Piotrowski
2006-08-12 21:02 ` [RFC] [PATCH 4/9] drivers/scsi/gdth_proc.c " Michal Piotrowski
2006-08-12 21:02 ` [RFC] [PATCH 5/9] drivers/scsi/ips.c " Michal Piotrowski
2006-08-12 21:02 ` [RFC] [PATCH 6/9] drivers/scsi/ips.h " Michal Piotrowski
2006-08-12 21:03 ` Michal Piotrowski [this message]
2006-08-12 21:03 ` [RFC] [PATCH 8/9] drivers/scsi/nsp32.h " Michal Piotrowski
2006-08-12 21:03 ` [RFC] [PATCH 9/9] drivers/scsi/pcmcia/nsp_cs.h " Michal Piotrowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44DE420A.4050008@gmail.com \
--to=michal.k.k.piotrowski@gmail.com \
--cc=James.Bottomley@steeleye.com \
--cc=akpm@osdl.org \
--cc=gotom@debian.or.jp \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox