Re: 2.6.18-rc4-mm1: eth0: trigger_send() called with the transmitter busy

[Laurent Riffard <laurent.riffard@free.fr>]

Le 14.08.2006 23:25, Rafael J. Wysocki a écrit :
> On Monday 14 August 2006 22:06, Laurent Riffard wrote:
>> Le 14.08.2006 19:47, Laurent Riffard a écrit :
>>> Le 14.08.2006 18:50, Andrew Morton a écrit :
>>>> On Mon, 14 Aug 2006 16:38:47 +0200
>>>> Laurent Riffard <laurent.riffard@free.fr> wrote:
>>>>
>>>>> Le 13.08.2006 10:24, Andrew Morton a __crit :
>>>>>> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.18-rc4/2.6.18-rc4-mm1/
>>>>> Hello,
>>>>>
>>>>> This morning, while trying to suspend to disk, my box started to loop 
>>>>> displaying the following message:
>>>>> eth0: trigger_send() called with the transmitter busy.
>>>>>
>>>>> Here is the scenario. I booted 2.6.18-rc4-mm1 with this command line:
>>>>> root=/dev/vglinux1/lvroot video=vesafb:ywrap,mtrr splash=silent resume=/dev/hdb7 netconsole=@192.163.0.3/,@192.168.0.1/00:0E:9B:91:ED:72 init 1
>>>>>
>>>>> Then I issued:
>>>>> # echo 6 > /proc/sys/kernel/printk
>>>>> # echo disk > /sys/power/state
>>>> ne2k isn't <ahem> the most actively-maintained driver.
>>>>
>>>> But most (I think all) net drivers have problems during suspend when
>>>> netconsole is active.  Does disabling netconsole help?
>>> Yes it does. 
>>>  
>>>> Did this operation work OK in earlier kernels, with netconsole enabled?
>>> It's the first time I see such a message. I can't speak for 2.6.18-rc3-mm2 
>>> because it could not suspend at all (did hang right after 
>>> "echo disk > /sys/power/state"), but it worked in earlier kernels.
>>>
>>> I'll try with plain 2.6.18-rc4.
>> Same problem with 2.6.18-rc4.
> 
> I think something like this will help (untested):

Well, sort of: it sometimes works, which is better than not. I tried
about 10 times and it sometimes hangs after 'shrinking memory' or whilst 
writing to the swap device. The message "eth0: trigger_send() called 
with the transmitter busy" didn't appear anymore.

Note that I always have had a warning sowhere in acpi_pci_link_set during suspend:
 BUG: sleeping function called from invalid context at include/asm/semaphore.h:99

I'm under the impression your patch is a workaround for my network problem. 
Or must really netconsole be stopped during device_suspend ?

>  kernel/power/disk.c |    7 +++++++
>  1 files changed, 7 insertions(+)
> 
> Index: linux-2.6.18-rc4-mm1/kernel/power/disk.c
> ===================================================================
> --- linux-2.6.18-rc4-mm1.orig/kernel/power/disk.c
> +++ linux-2.6.18-rc4-mm1/kernel/power/disk.c
> @@ -119,8 +119,10 @@ int pm_suspend_disk(void)
>  	if (error)
>  		return error;
>  
> +	suspend_console();
>  	error = device_suspend(PMSG_FREEZE);
>  	if (error) {
> +		resume_console();
>  		printk("Some devices failed to suspend\n");
>  		unprepare_processes();
>  		return error;
> @@ -133,6 +135,7 @@ int pm_suspend_disk(void)
>  
>  	if (in_suspend) {
>  		device_resume();
> +		resume_console();
>  		pr_debug("PM: writing image.\n");
>  		error = swsusp_write();
>  		if (!error)
> @@ -148,6 +151,7 @@ int pm_suspend_disk(void)
>  	swsusp_free();
>   Done:
>  	device_resume();
> +	resume_console();
>  	unprepare_processes();
>  	return error;
>  }
> @@ -212,7 +216,9 @@ static int software_resume(void)
>  
>  	pr_debug("PM: Preparing devices for restore.\n");
>  
> +	suspend_console();
>  	if ((error = device_suspend(PMSG_PRETHAW))) {
> +		resume_console();
>  		printk("Some devices failed to suspend\n");
>  		swsusp_free();
>  		goto Thaw;
> @@ -224,6 +230,7 @@ static int software_resume(void)
>  	swsusp_resume();
>  	pr_debug("PM: Restore failed, recovering.n");
>  	device_resume();
> +	resume_console();
>   Thaw:
>  	unprepare_processes();
>   Done:

BTW, it doesn't apply cleanly:

  CC      kernel/power/disk.o
kernel/power/disk.c: In function 'pm_suspend_disk':
kernel/power/disk.c:122: warning: implicit declaration of function 'suspend_console'
kernel/power/disk.c:125: warning: implicit declaration of function 'resume_console'
-- 
laurent