* Seg Fault loading 2.4.33.2
@ 2006-08-26 23:18 Noel
2006-08-26 23:39 ` Adrian Bunk
0 siblings, 1 reply; 3+ messages in thread
From: Noel @ 2006-08-26 23:18 UTC (permalink / raw)
To: linux-kernel
System does not boot with latest 2.4.33.2 kernel
The same kernel options ( a cp .config ) from 2.4.32 to new kernel
2.4.33.2 tree
make menuconfig and saved (no changes made)
This is Slackware 10.2
all makes and installs succeed without a glitch
ver_linux output:
Linux valhalla 2.4.32.s #2 SMP Fri Jun 16 17:58:07 EST 2006 i686 unknown
unknown GNU/Linux
Gnu C 3.3.6
Gnu make 3.80
binutils 2.15.92.0.2
util-linux 2.12p
mount 2.12p
modutils 2.4.27
e2fsprogs 1.38
jfsutils 1.1.8
xfsprogs 2.6.13
pcmcia-cs 3.2.8
quota-tools 3.12.
Linux C Library 2.3.5
Dynamic linker (ldd) 2.3.5
Linux C++ Library 5.0.7
Procps 3.2.5
Net-tools 1.60
Kbd 1.12
Sh-utils 5.2.1
Modules Loaded ipt_state ip_conntrack ipt_REJECT iptable_mangle
iptable_filter ip_tables i810_rng pcmcia_core ide-scsi agpgart
# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Pentium(R) 4 CPU 2.60GHz
stepping : 9
cpu MHz : 2593.521
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid
bogomips : 5177.34
processor : 1
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Pentium(R) 4 CPU 2.60GHz
stepping : 9
cpu MHz : 2593.521
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid
bogomips : 5177.34
# cat /proc/meminfo
total: used: free: shared: buffers: cached:
Mem: 1056575488 417181696 639393792 0 5332992 75481088
Swap: 954122240 0 954122240
# capture file:
>
> LILO 22.7.1
>
> Welcome to the LILO Boot Loader!
>
> Please enter the name of the partition you would like to boot
>
> at the prompt below. The choices are:
>
> Linux - (Linux partition)
>
> boot:
>
> Loading Linux........................
>
> BIOS data check successful
>
> Linux version 2.4.33.2 (root@valhalla) (gcc version 3.3.6) #2 SMP Sun
> Aug 27 07:56:31 EST 2006
>
> BIOS-provided physical RAM map:
>
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>
> BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
>
> BIOS-e820: 0000000000100000 - 000000003fe30000 (usable)
>
> BIOS-e820: 000000003fe30000 - 000000003fe3e05e (ACPI NVS)
>
> BIOS-e820: 000000003fe3e05e - 000000003ff30000 (usable)
>
> BIOS-e820: 000000003ff30000 - 000000003ff40000 (ACPI data)
>
> BIOS-e820: 000000003ff40000 - 000000003fff0000 (ACPI NVS)
>
> BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
>
> BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)
>
> BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
>
> 127MB HIGHMEM available.
>
> 896MB LOWMEM available.
>
> found SMP MP-table at 000ff780
>
> hm, page 000ff000 reserved twice.
>
> hm, page 00100000 reserved twice.
>
> hm, page 000fc000 reserved twice.
>
> hm, page 000fd000 reserved twice.
>
> On node 0 totalpages: 261936
>
> zone(0): 4096 pages.
>
> zone(1): 225280 pages.
>
> zone(2): 32560 pages.
>
> ACPI: RSDP (v000 ACPIAM ) @ 0x000f63b0
>
> ACPI: RSDT (v001 INTEL D865PERL 0x20040122 MSFT 0x00000097) @ 0x3ff30000
>
> ACPI: FADT (v002 INTEL D865PERL 0x20040122 MSFT 0x00000097) @ 0x3ff30200
>
> ACPI: MADT (v001 INTEL D865PERL 0x20040122 MSFT 0x00000097) @ 0x3ff30300
>
> ACPI: ASF! (v016 LEGEND I865PASF 0x00000001 MSFT 0x0100000d) @ 0x3ff344e0
>
> ACPI: WDDT (v001 INTEL OEMWDDT 0x00000001 MSFT 0x0100000d) @ 0x3ff34579
>
> ACPI: DSDT (v001 INTEL D865PERL 0x00000006 MSFT 0x0100000d) @ 0x00000000
>
> ACPI: Local APIC address 0xfee00000
>
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>
> Processor #0 Pentium 4(tm) XEON(tm) APIC version 20
>
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>
> Processor #1 Pentium 4(tm) XEON(tm) APIC version 20
>
> ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>
> ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>
> Using ACPI for processor (LAPIC) configuration information
>
> Intel MultiProcessor Specification v1.4
>
> Virtual Wire compatibility mode.
>
> OEM ID: Product ID: Springdale-G APIC at: 0xFEE00000
>
> I/O APIC #2 Version 32 at 0xFEC00000.
>
> Enabling APIC mode: Flat. Using 1 I/O APICs
>
> Processors: 2
>
> Kernel command line: auto BOOT_IMAGE=Linux ro root=301 apm=power-off
> console=ttyS0,9600n8
>
> Initializing CPU#0
>
> Detected 2593.562 MHz processor.
>
> Console: colour VGA+ 80x25
>
> Calibrating delay loop... 5177.34 BogoMIPS
>
> Memory: 1031640k/1047744k available (1812k kernel code, 15656k
> reserved, 682k data, 172k init, 130180k highmem)
>
> Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>
> Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
>
> Mount cache hash table entries: 512 (order: 0, 4096 bytes)
>
> Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
>
> Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
>
> CPU: Trace cache: 12K uops, L1 D cache: 8K
>
> CPU: L2 cache: 512K
>
> CPU: Physical Processor ID: 0
>
> Intel machine check architecture supported.
>
> Intel machine check reporting enabled on CPU#0.
>
> Enabling fast FPU save and restore... done.
>
> Enabling unmasked SIMD FPU exception support... done.
>
> Checking 'hlt' instruction... OK.
>
> POSIX conformance testing by UNIFIX
>
> mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
>
> mtrr: detected mtrr type: Intel
>
> CPU: Trace cache: 12K uops, L1 D cache: 8K
>
> CPU: L2 cache: 512K
>
> CPU: Physical Processor ID: 0
>
> Intel machine check reporting enabled on CPU#0.
>
> CPU0: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09
>
> per-CPU timeslice cutoff: 1462.72 usecs.
>
> enabled ExtINT on CPU#0
>
> ESR value before enabling vector: 00000000
>
> ESR value after enabling vector: 00000000
>
> Booting processor 1/1 eip 2000
>
> Initializing CPU#1
>
> masked ExtINT on CPU#1
>
> ESR value before enabling vector: 00000000
>
> ESR value after enabling vector: 00000000
>
> Calibrating delay loop... 5177.34 BogoMIPS
>
> CPU: Trace cache: 12K uops, L1 D cache: 8K
>
> CPU: L2 cache: 512K
>
> CPU: Physical Processor ID: 0
>
> Intel machine check reporting enabled on CPU#1.
>
> CPU1: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09
>
> Total of 2 processors activated (10354.68 BogoMIPS).
>
> cpu_sibling_map[0] = 1
>
> cpu_sibling_map[1] = 0
>
> ENABLING IO-APIC IRQs
>
> Setting 2 in the phys_id_present_map
>
> ...changing IO-APIC physical APIC ID to 2 ... ok.
>
> ..TIMER: vector=0x31 pin1=2 pin2=0
>
> testing the IO APIC.......................
>
> .................................... done.
>
> Using local APIC timer interrupts.
>
> calibrating APIC timer ...
>
> ..... CPU clock speed is 2593.4920 MHz.
>
> ..... host bus clock speed is 199.4992 MHz.
>
> cpu: 0, clocks: 1994992, slice: 664997
>
> CPU0<T0:1994992,T1:1329984,D:11,S:664997,C:1994992>
>
> cpu: 1, clocks: 1994992, slice: 664997
>
> CPU1<T0:1994992,T1:664992,D:6,S:664997,C:1994992>
>
> checking TSC synchronization across CPUs: passed.
>
> Waiting on wait_init_idle (map = 0x2)
>
> All processors have done init_idle
>
> PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
>
> PCI: Using configuration type 1
>
> PCI: Probing PCI hardware
>
> PCI: Probing PCI hardware (bus 00)
>
> PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
>
> Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
>
> PCI: Using IRQ router PIIX/ICH [8086/24d0] at 00:1f.0
>
> PCI->APIC IRQ transform: (B0,I29,P0) -> 16
>
> PCI->APIC IRQ transform: (B0,I29,P1) -> 19
>
> PCI->APIC IRQ transform: (B0,I29,P2) -> 18
>
> PCI->APIC IRQ transform: (B0,I29,P0) -> 16
>
> PCI->APIC IRQ transform: (B0,I29,P3) -> 23
>
> PCI->APIC IRQ transform: (B0,I31,P0) -> 18
>
> PCI->APIC IRQ transform: (B0,I31,P0) -> 18
>
> PCI->APIC IRQ transform: (B0,I31,P1) -> 17
>
> PCI->APIC IRQ transform: (B0,I31,P1) -> 17
>
> PCI->APIC IRQ transform: (B2,I0,P0) -> 21
>
> PCI->APIC IRQ transform: (B2,I2,P0) -> 17
>
> isapnp: Scanning for PnP cards...
>
> isapnp: No Plug & Play device found
>
> Linux NET4.0 for Linux 2.4
>
> Based upon Swansea University Computer Society NET3.039
>
> Initializing RT netlink socket
>
> apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
>
> apm: disabled - APM is not SMP safe (power off active).
>
> Starting kswapd
>
> allocated 32 pages and 32 bhs reserved for the highmem bounces
>
> VFS: Disk quotas vdquot_6.5.1
>
> Journalled Block Device driver loaded
>
> Detected PS/2 Mouse Port.
>
> pty: 2048 Unix98 ptys configured
>
> keyboard: Timeout - AT keyboard not present?(ed)
>
> keyboard: Timeout - AT keyboard not present?(f4)
>
> Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT
> SHARE_IRQ SERIAL_PCI ISAPNP enabled
>
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
>
> Real Time Clock Driver v1.10f
>
> Floppy drive(s): fd0 is 1.44M
>
> FDC 0 is a post-1991 82077
>
> NET4: Frame Diverter 0.46
>
> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
>
> Intel(R) PRO/100 Network Driver - version 2.3.43-k1
>
> Copyright (c) 2004 Intel Corporation
>
> e100: eth0: Intel(R) PRO/100 Network Connection
>
> Hardware receive checksums enabled
>
> cpu cycle saver enabled
>
> Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
>
> ide: Assuming 33MHz system bus speed for PIO modes; override with
> idebus=xx
>
> ICH5: IDE controller at PCI slot 00:1f.1
>
> PCI: Enabling device 00:1f.1 (0005 -> 0007)
>
> ICH5: chipset revision 2
>
> ICH5: not 100% native mode: will probe irqs later
>
> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
>
> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
>
> hda: Maxtor 6Y080L0, ATA DISK drive
>
> hdb: ST3300622A, ATA DISK drive
>
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>
> hda: attached ide-disk driver.
>
> hda: host protected area => 1
>
> hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=158816/16/63,
> UDMA(33)
>
> hdb: attached ide-disk driver.
>
> hdb: host protected area => 1
>
> hdb: 586072368 sectors (300069 MB) w/16384KiB Cache, CHS=36481/255/63,
> UDMA(33)
>
> Partition check:
>
> hda: [PTBL] [9964/255/63] hda1 hda2
>
> hdb: hdb1
>
> ide: late registration of driver.
>
> SCSI subsystem driver Revision: 1.00
>
> sym53c416.c: Version 1.0.0-ac
>
> DC390: 0 adapters found
>
> kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
>
> kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
>
> kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
>
> kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
>
> md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>
> md: Autodetecting RAID arrays.
>
> md: autorun ...
>
> md: ... autorun DONE.
>
> NET4: Linux TCP/IP 1.0 for NET4.0
>
> IP Protocols: ICMP, UDP, TCP, IGMP
>
> IP: routing cache hash table of 8192 buckets, 64Kbytes
>
> TCP: Hash tables configured (established 262144 bind 65536)
>
> Linux IP multicast router 0.06 plus PIM-SM
>
> NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
>
> VFS: Mounted root (ext2 filesystem) readonly.
>
> Freeing unused kernel memory: 172k freed
>
> INIT: version 2.84 booting
>
> sh: ../nptl/sysdeps/unix/sysv/linux/fork.c:138: __libc_fork: Assertion
> `({ __typeof (self->tid) __value; if (sizeof (__value) == 1) asm
> volatile ("movb %%gs:%P2,%b0" : "=q" (__value) : "0" (0), "i"
> (((size_t) &((struct pthread *)0)->tid))); else if (sizeof (__value)
> == 4) asm volatile ("movl %%gs:%P1,%0" : "=r" (__value) : "i"
> (((size_t) &((struct pthread *)0)->tid))); else { if (sizeof (__value)
> != 8) abort (); asm volatile ("movl %%gs:%P1,%%eax\n\t" "movl
> %%gs:%P2,%%edx" : "=A" (__value) : "i" (((size_t) &((struct pthread
> *)0)->tid)), "i" (((size_t) &((struct pthread *)0)->tid) + 4)); }
> __value; }) != ppid' failed.
>
> /etc/rc.d/rc.S: line 11: 17 Segmentation fault /sbin/mount -v
> proc /proc -n -t proc
>
> sh: ../nptl/sysdeps/unix/sysv/linux/fork.c:138: __libc_fork: Assertion
> `({ __typeof (self->tid) __value; if (sizeof (__value) == 1) asm
> volatile ("movb %%gs:%P2,%b0" : "=q" (__value) : "0" (0), "i"
> (((size_t) &((struct pthread *)0)->tid))); else if (sizeof (__value)
> == 4) asm volatile ("movl %%gs:%P1,%0" : "=r" (__value) : "i"
> (((size_t) &((struct pthread *)0)->tid))); else { if (sizeof (__value)
> != 8) abort (); asm volatile ("movl %%gs:%P1,%%eax\n\t" "movl
> %%gs:%P2,%%edx" : "=A" (__value) : "i" (((size_t) &((struct pthread
> *)0)->tid)), "i" (((size_t) &((struct pthread *)0)->tid) + 4)); }
> __value; }) != ppid' failed.
>
> sh: ../nptl/sysdeps/unix/sysv/linux/fork.c:138: __libc_fork: Assertion
> `({ __typeof (self->tid) __value; if (sizeof (__value) == 1) asm
> volatile ("movb %%gs:%P2,%b0" : "=q" (__value) : "0" (0), "i"
> (((size_t) &((struct pthread *)0)->tid))); else if (sizeof (__value)
> == 4) asm volatile ("movl %%gs:%P1,%0" : "=r" (__value) : "i"
> (((size_t) &((struct pthread *)0)->tid))); else { if (sizeof (__value)
> != 8) abort (); asm volatile ("movl %%gs:%P1,%%eax\n\t" "movl
> %%gs:%P2,%%edx" : "=A" (__value) : "i" (((size_t) &((struct pthread
> *)0)->tid)), "i" (((size_t) &((struct pthread *)0)->tid) + 4)); }
> __value; }) != ppid' failed.
>
> /etc/rc.d/rc.S: line 36: 18 Segmentation fault cat
> /proc/filesystems
>
> 19 | grep -w sysfs >/dev/null 2>/dev/null
>
> sh: ../nptl/sysdeps/unix/sysv/linux/fork.c:138: __libc_fork: Assertion
> `({ __typeof (self->tid) __value; if (sizeof (__value) == 1) asm
> volatile ("movb %%gs:%P2,%b0" : "=q" (__value) : "0" (0), "i"
> (((size_t) &((struct pthread *)0)->tid))); else if (sizeof (__value)
> == 4) asm volatile ("movl %%gs:%P1,%0" : "=r" (__value) : "i"
> (((size_t) &((struct pthread *)0)->tid))); else { if (sizeof (__value)
> != 8) abort (); asm volatile ("movl %%gs:%P1,%%eax\n\t" "movl
> %%gs:%P2,%%edx" : "=A" (__value) : "i" (((size_t) &((struct pthread
> *)0)->tid)), "i" (((size_t) &((struct pthread *)0)->tid) + 4)); }
> __value; }) != ppid' failed.
>
> /etc/rc.d/rc.S: line 46: 20 Segmentation fault /sbin/swapon -a
>
> sh: ../nptl/sysdeps/unix/sysv/linux/fork.c:138: __libc_fork: Assertion
> `({ __typeof (self->tid) __value; if (sizeof (__value) == 1) asm
> volatile ("movb %%gs:%P2,%b0" : "=q" (__value) : "0" (0), "i"
> (((size_t) &((struct pthread *)0)->tid))); else if (sizeof (__value)
> == 4) asm volatile ("movl %%gs:%P1,%0" : "=r" (__value) : "i"
> (((size_t) &((struct pthread *)0)->tid))); else { if (sizeof (__value)
> != 8) abort (); asm volatile ("movl %%gs:%P1,%%eax\n\t" "movl
> %%gs:%P2,%%edx" : "=A" (__value) : "i" (((size_t) &((struct pthread
> *)0)->tid)), "i" (((size_t) &((struct pthread *)0)->tid) + 4)); }
> __value; }) != ppid' failed.
>
> /etc/rc.d/rc.S: line 55: 21 Segmentation fault touch
> /fsrwtestfile 2>/dev/null
>
> Testing root filesystem status: read-only filesystem
>
> Checking root filesystem:
>
> sh: ../nptl/sysdeps/unix/sysv/linux/fork.c:138: __libc_fork: Assertion
> `({ __typeof (self->tid) __value; if (sizeof (__value) == 1) asm
> volatile ("movb %%gs:%P2,%b0" : "=q" (__value) : "0" (0), "i"
> (((size_t) &((struct pthread *)0)->tid))); else if (sizeof (__value)
> == 4) asm volatile ("movl %%gs:%P1,%0" : "=r" (__value) : "i"
> (((size_t) &((struct pthread *)0)->tid))); else { if (sizeof (__value)
> != 8) abort (); asm volatile ("movl %%gs:%P1,%%eax\n\t" "movl
> %%gs:%P2,%%edx" : "=A" (__value) : "i" (((size_t) &((struct pthread
> *)0)->tid)), "i" (((size_t) &((struct pthread *)0)->tid) + 4)); }
> __value; }) != ppid' failed.
>
> /etc/rc.d/rc.S: line 159: 22 Segmentation fault /sbin/fsck
> $FORCEFSCK -C -a /
>
> ***********************************************************
>
> *** An error occurred during the root filesystem check. ***
>
> *** You will now be given a chance to log into the ***
>
> *** system in single-user mode to fix the problem. ***
>
> *** ***
>
> *** If you are using the ext2 filesystem, running ***
>
> *** 'e2fsck -v -y <partition>' might help. ***
>
> ***********************************************************
>
> Once you exit the single-user shell, the system will reboot.
>
> sh: ../nptl/sysdeps/unix/sysv/linux/fork.c:138: __libc_fork: Assertion
> `({ __typeof (self->tid) __value; if (sizeof (__value) == 1) asm
> volatile ("movb %%gs:%P2,%b0" : "=q" (__value) : "0" (0), "i"
> (((size_t) &((struct pthread *)0)->tid))); else if (sizeof (__value)
> == 4) asm volatile ("movl %%gs:%P1,%0" : "=r" (__value) : "i"
> (((size_t) &((struct pthread *)0)->tid))); else { if (sizeof (__value)
> != 8) abort (); asm volatile ("movl %%gs:%P1,%%eax\n\t" "movl
> %%gs:%P2,%%edx" : "=A" (__value) : "i" (((size_t) &((struct pthread
> *)0)->tid)), "i" (((size_t) &((struct pthread *)0)->tid) + 4)); }
> __value; }) != ppid' failed.
>
> /etc/rc.d/rc.S: line 159: 23 Segmentation fault sulogin
>
> Unmounting file systems.
>
> sh: ../nptl/sysdeps/unix/sysv/linux/fork.c:138: __libc_fork: Assertion
> `({ __typeof (self->tid) __value; if (sizeof (__value) == 1) asm
> volatile ("movb %%gs:%P2,%b0" : "=q" (__value) : "0" (0), "i"
> (((size_t) &((struct pthread *)0)->tid))); else if (sizeof (__value)
> == 4) asm volatile ("movl %%gs:%P1,%0" : "=r" (__value) : "i"
> (((size_t) &((struct pthread *)0)->tid))); else { if (sizeof (__value)
> != 8) abort (); asm volatile ("movl %%gs:%P1,%%eax\n\t" "movl
> %%gs:%P2,%%edx" : "=A" (__value) : "i" (((size_t) &((struct pthread
> *)0)->tid)), "i" (((size_t) &((struct pthread *)0)->tid) + 4)); }
> __value; }) != ppid' failed.
>
> /etc/rc.d/rc.S: line 159: 24 Segmentation fault /sbin/umount -a -r
>
> sh: ../nptl/sysdeps/unix/sysv/linux/fork.c:138: __libc_fork: Assertion
> `({ __typeof (self->tid) __value; if (sizeof (__value) == 1) asm
> volatile ("movb %%gs:%P2,%b0" : "=q" (__value) : "0" (0), "i"
> (((size_t) &((struct pthread *)0)->tid))); else if (sizeof (__value)
> == 4) asm volatile ("movl %%gs:%P1,%0" : "=r" (__value) : "i"
> (((size_t) &((struct pthread *)0)->tid))); else { if (sizeof (__value)
> != 8) abort (); asm volatile ("movl %%gs:%P1,%%eax\n\t" "movl
> %%gs:%P2,%%edx" : "=A" (__value) : "i" (((size_t) &((struct pthread
> *)0)->tid)), "i" (((size_t) &((struct pthread *)0)->tid) + 4)); }
> __value; }) != ppid' failed.
>
> /etc/rc.d/rc.S: line 159: 25 Segmentation fault /sbin/mount -n
> -o remount,ro /
>
> Rebooting system.
>
> sh: ../nptl/sysdeps/unix/sysv/linux/fork.c:138: __libc_fork: Assertion
> `({ __typeof (self->tid) __value; if (sizeof (__value) == 1) asm
> volatile ("movb %%gs:%P2,%b0" : "=q" (__value) : "0" (0), "i"
> (((size_t) &((struct pthread *)0)->tid))); else if (sizeof (__value)
> == 4) asm volatile ("movl %%gs:%P1,%0" : "=r" (__value) : "i"
> (((size_t) &((struct pthread *)0)->tid))); else { if (sizeof (__value)
> != 8) abort (); asm volatile ("movl %%gs:%P1,%%eax\n\t" "movl
> %%gs:%P2,%%edx" : "=A" (__value) : "i" (((size_t) &((struct pthread
> *)0)->tid)), "i" (((size_t) &((struct pthread *)0)->tid) + 4)); }
> __value; }) != ppid' failed.
>
> /etc/rc.d/rc.S: line 159: 26 Segmentation fault sleep 2
>
> sh: ../nptl/sysdeps/unix/sysv/linux/fork.c:138: __libc_fork: Assertion
> `({ __typeof (self->tid) __value; if (sizeof (__value) == 1) asm
> volatile ("movb %%gs:%P2,%b0" : "=q" (__value) : "0" (0), "i"
> (((size_t) &((struct pthread *)0)->tid))); else if (sizeof (__value)
> == 4) asm volatile ("movl %%gs:%P1,%0" : "=r" (__value) : "i"
> (((size_t) &((struct pthread *)0)->tid))); else { if (sizeof (__value)
> != 8) abort (); asm volatile ("movl %%gs:%P1,%%eax\n\t" "movl
> %%gs:%P2,%%edx" : "=A" (__value) : "i" (((size_t) &((struct pthread
> *)0)->tid)), "i" (((size_t) &((struct pthread *)0)->tid) + 4)); }
> __value; }) != ppid' failed.
>
> /etc/rc.d/rc.S: line 159: 27 Segmentation fault reboot -f
>
> Remounting root device with read-write enabled.
>
> sh: ../nptl/sysdeps/unix/sysv/linux/fork.c:138: __libc_fork: Assertion
> `({ __typeof (self->tid) __value; if (sizeof (__value) == 1) asm
> volatile ("movb %%gs:%P2,%b0" : "=q" (__value) : "0" (0), "i"
> (((size_t) &((struct pthread *)0)->tid))); else if (sizeof (__value)
> == 4) asm volatile ("movl %%gs:%P1,%0" : "=r" (__value) : "i"
> (((size_t) &((struct pthread *)0)->tid))); else { if (sizeof (__value)
> != 8) abort (); asm volatile ("movl %%gs:%P1,%%eax\n\t" "movl
> %%gs:%P2,%%edx" : "=A" (__value) : "i" (((size_t) &((struct pthread
> *)0)->tid)), "i" (((size_t) &((struct pthread *)0)->tid) + 4)); }
> __value; }) != ppid' failed.
>
> /etc/rc.d/rc.S: line 159: 28 Segmentation fault /sbin/mount -w
> -v -n -o remount /
>
> Attempt to remount root device as read-write failed! This is going to
>
> cause serious problems.
>
> If you're using the UMSDOS filesystem, you **MUST** mount the root
> partition
>
> read-write! You can make sure the root filesystem is getting mounted
>
> read-write with the 'rw' flag to Loadlin:
>
> loadlin vmlinuz root=/dev/hda1 rw (replace /dev/hda1 with your root
> device)
>
> Normal bootdisks can be made to mount a system read-write with the
> rdev command:
>
> rdev -R /dev/fd0 0
>
> You can also get into your system by using a boot disk with a command
> like this
>
> on the LILO prompt line: (change the root partition name as needed)
>
> LILO: mount root=/dev/hda1 rw
>
> Please press ENTER to continue, then reboot and use one of the above
> methods to
>
> get into your
>
..at this time I power cycled and reloaded to kern 2.4.32 and it remains
active
Hope you can offer some suggestions.
Thanks.
Res
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Seg Fault loading 2.4.33.2
2006-08-26 23:18 Seg Fault loading 2.4.33.2 Noel
@ 2006-08-26 23:39 ` Adrian Bunk
2006-08-27 0:07 ` Noel
0 siblings, 1 reply; 3+ messages in thread
From: Adrian Bunk @ 2006-08-26 23:39 UTC (permalink / raw)
To: Noel; +Cc: linux-kernel
http://lkml.org/lkml/2006/8/22/288
cu
Adrian
--
Gentoo kernels are 42 times more popular than SUSE kernels among
KLive users (a service by SUSE contractor Andrea Arcangeli that
gathers data about kernels from many users worldwide).
There are three kinds of lies: Lies, Damn Lies, and Statistics.
Benjamin Disraeli
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Seg Fault loading 2.4.33.2
2006-08-26 23:39 ` Adrian Bunk
@ 2006-08-27 0:07 ` Noel
0 siblings, 0 replies; 3+ messages in thread
From: Noel @ 2006-08-27 0:07 UTC (permalink / raw)
To: Adrian Bunk; +Cc: linux-kernel
Adrian Bunk wrote:
> http://lkml.org/lkml/2006/8/22/288
>
> cu
> Adrian
>
>
Hi,
Thanks!
Res
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2006-08-27 0:07 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-08-26 23:18 Seg Fault loading 2.4.33.2 Noel
2006-08-26 23:39 ` Adrian Bunk
2006-08-27 0:07 ` Noel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox