From: Johnny Strom <johnny.strom@osp.fi>
To: linux-kernel@vger.kernel.org
Subject: Patch to make VIA sata board bootable again.
Date: Fri, 01 Sep 2006 11:15:17 +0300 [thread overview]
Message-ID: <44F7EC15.8040800@osp.fi> (raw)
Hello
The quirks.c update that went into 2.6.16.17 made an VIA machine here
non bootable from an sata drive (via_sata), the error is:
"ATA1 qc timout"
"Failed to set xfermode".
And later kernel panic becouse no sata disk was found.
I tracked it down to the quirk update in 2.6.16.17. Below is a patch
against 2.6.17.11 that reverses the uppdate and makse the system
bootable again.
Another option is to find out the PCI_DEVICE_ID_VIA for the motherboard
in question but I could not get that info. Dose someone have an idea how
to find that info? then I can provide an patch that adds the right
PCI_DEVICE_ID_VIA for my motherboard.
diff -ur linux-2.6.17.11-org/drivers/pci/quirks.c
linux-2.6.17.11/drivers/pci/quirks.c
--- linux-2.6.17.11-org/drivers/pci/quirks.c 2006-09-01
10:38:31.135747500 +0300
+++ linux-2.6.17.11/drivers/pci/quirks.c 2006-09-01 10:42:28.870605000 +0300
@@ -652,13 +652,7 @@
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
}
}
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0,
quirk_via_irq);
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1,
quirk_via_irq);
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2,
quirk_via_irq);
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3,
quirk_via_irq);
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686,
quirk_via_irq);
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4,
quirk_via_irq);
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5,
quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
/*
* VIA VT82C598 has its device ID settable and many BIOSes
Signed-off-by: johnny.strom@osp.fi
next reply other threads:[~2006-09-01 8:15 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-09-01 8:15 Johnny Strom [this message]
2006-09-01 8:47 ` Patch to make VIA sata board bootable again Andrew Morton
2006-09-01 10:48 ` Johnny Strom
2006-09-01 15:55 ` Chris Wedgwood
2006-09-04 12:04 ` Johnny Strom
2006-09-01 11:49 ` Sergio Monteiro Basto
2006-09-01 12:43 ` Johnny Strom
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44F7EC15.8040800@osp.fi \
--to=johnny.strom@osp.fi \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox