From: Johnny Strom <johnny.strom@osp.fi>
To: Sergio Monteiro Basto <sergio@sergiomb.no-ip.org>
Cc: linux-kernel@vger.kernel.org
Subject: Re: Patch to make VIA sata board bootable again.
Date: Fri, 01 Sep 2006 15:43:59 +0300 [thread overview]
Message-ID: <44F82B0F.4060901@osp.fi> (raw)
In-Reply-To: <1157111352.3491.1.camel@localhost.localdomain>
Sergio Monteiro Basto wrote:
> Hi, Can you give me the information of interrupts
> cat /proc/interrupts
>
> XT_PIC or IO-APIC-edge/level ?
>
>
Here it is.
cat /proc/interrupts
CPU0
0: 1692278 XT-PIC timer
1: 40 XT-PIC i8042
2: 0 XT-PIC cascade
7: 414568 XT-PIC libata, ohci1394, uhci_hcd:usb2,
uhci_hcd:usb3, radeon@pci:0000:01:00.0
8: 4 XT-PIC rtc
9: 0 XT-PIC acpi
10: 534456 XT-PIC sk98lin, ehci_hcd:usb1, VIA8237, eth0
11: 0 XT-PIC uhci_hcd:usb4, uhci_hcd:usb5
12: 130 XT-PIC i8042
14: 53 XT-PIC ide0
15: 101 XT-PIC ide1
NMI: 0
ERR: 0
Johnny
> On Fri, 2006-09-01 at 11:15 +0300, Johnny Strom wrote:
>
>>Hello
>>
>>The quirks.c update that went into 2.6.16.17 made an VIA machine here
>>non bootable from an sata drive (via_sata), the error is:
>>
>>"ATA1 qc timout"
>>"Failed to set xfermode".
>>
>>And later kernel panic becouse no sata disk was found.
>>I tracked it down to the quirk update in 2.6.16.17. Below is a patch
>>against 2.6.17.11 that reverses the uppdate and makse the system
>>bootable again.
>>
>>Another option is to find out the PCI_DEVICE_ID_VIA for the motherboard
>>in question but I could not get that info. Dose someone have an idea how
>>to find that info? then I can provide an patch that adds the right
>>PCI_DEVICE_ID_VIA for my motherboard.
>>
>>
>>
>>diff -ur linux-2.6.17.11-org/drivers/pci/quirks.c
>>linux-2.6.17.11/drivers/pci/quirks.c
>>--- linux-2.6.17.11-org/drivers/pci/quirks.c 2006-09-01
>>10:38:31.135747500 +0300
>>+++ linux-2.6.17.11/drivers/pci/quirks.c 2006-09-01 10:42:28.870605000 +0300
>>@@ -652,13 +652,7 @@
>> pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
>> }
>> }
>>-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0,
>>quirk_via_irq);
>>-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1,
>>quirk_via_irq);
>>-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2,
>>quirk_via_irq);
>>-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3,
>>quirk_via_irq);
>>-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686,
>>quirk_via_irq);
>>-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4,
>>quirk_via_irq);
>>-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5,
>>quirk_via_irq);
>>+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
>>
>> /*
>> * VIA VT82C598 has its device ID settable and many BIOSes
>>
>>
>>
>>Signed-off-by: johnny.strom@osp.fi
>>-
>>To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>>the body of a message to majordomo@vger.kernel.org
>>More majordomo info at http://vger.kernel.org/majordomo-info.html
>>Please read the FAQ at http://www.tux.org/lkml/
>
>
>
prev parent reply other threads:[~2006-09-01 12:44 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-09-01 8:15 Patch to make VIA sata board bootable again Johnny Strom
2006-09-01 8:47 ` Andrew Morton
2006-09-01 10:48 ` Johnny Strom
2006-09-01 15:55 ` Chris Wedgwood
2006-09-04 12:04 ` Johnny Strom
2006-09-01 11:49 ` Sergio Monteiro Basto
2006-09-01 12:43 ` Johnny Strom [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44F82B0F.4060901@osp.fi \
--to=johnny.strom@osp.fi \
--cc=linux-kernel@vger.kernel.org \
--cc=sergio@sergiomb.no-ip.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox