From: Jiri Slaby <jirislaby@gmail.com>
To: Steve Roemen <stever@carlislefsp.com>
Cc: <linux-kernel@vger.kernel.org>
Subject: Re: isicom module oops 2.6.17.13
Date: Wed, 13 Sep 2006 11:34:43 -0400 [thread overview]
Message-ID: <45082055.7010309.reply@wsc.cz> (raw)
In-Reply-To: <45082055.7010309@carlislefsp.com>
Steve Roemen wrote:
> after adding that patch to 2.6.18-rc6-mm2 and trying another card (an
> isi5634 pci/8) i get this in dmesg while loading the driver:
>
> faxserver2:~# modprobe isicom
> faxserver2:~# cat /var/log/kern.log
>
> Sep 13 09:59:11 localhost kernel: isicom 0000:00:10.0: ISI PCI
> Card(Device ID 0x2052)
> Sep 13 09:59:14 localhost kernel: isicom 0000:00:10.0: -Done
> Sep 13 09:59:15 localhost kernel: 00, FP: e09c762c
> Sep 13 09:59:15 localhost kernel: isicom 0000:00:10.0: WC: 8, FC: 16,
> FD: e09c7000, FP: e09c7640
> Sep 13 09:59:15 localhost kernel: isicom 0000:00:10.0: WC: 8, FC: 16,
> FD: e09c7000, FP: e09c7654
[snip]
> Sep 13 09:59:15 localhost kernel: isicom 0000:00:10.0: WC: 8, FC: 16,
> FD: e09c7000, FP: e09c8964
> Sep 13 09:59:15 localhost kernel: isicom 0000:00:10.0: WC: 8, FC: 16,
> FD: e09c7000, FP: e09c8978
> Sep 13 09:59:15 localhost kernel: isicom 0000:00:10.0: WC: 5, FC: 9, FD:
> e09c7000, FP: e09c898c
> Sep 13 09:59:17 localhost kernel: isicom: probe of 0000:00:10.0 failed
> with error -5
Yes, thanks a lot, but more diagnostics is needed and I forgot to correct for
loop for checking uploaded firmware...
Could you revert previous patch and apply this one, please?
diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c
index 6cca4b2..bf371b0 100644
--- a/drivers/char/isicom.c
+++ b/drivers/char/isicom.c
@@ -1756,11 +1756,18 @@ static int __devinit load_firmware(struc
if (retval)
goto end;
+ dev_info(&pdev->dev, "Firmware requested, size: %u\n", fw->size);
+
+ retval = -EIO;
+
for (frame = (struct stframe *)fw->data;
frame < (struct stframe *)(fw->data + fw->size);
- frame++) {
- if (WaitTillCardIsFree(base))
+ frame = (struct stframe *)((u8 *)frame + 4 +
+ frame->count)) {
+ if (WaitTillCardIsFree(base)) {
+ dev_err(&pdev->dev, "Card is not free: %u\n", __LINE__);
goto errrelfw;
+ }
outw(0xf0, base); /* start upload sequence */
outw(0x00, base);
@@ -1772,8 +1779,10 @@ static int __devinit load_firmware(struc
udelay(100); /* 0x2f */
- if (WaitTillCardIsFree(base))
+ if (WaitTillCardIsFree(base)) {
+ dev_err(&pdev->dev, "Card is not free: %u\n", __LINE__);
goto errrelfw;
+ }
if ((status = inw(base + 0x4)) != 0) {
dev_warn(&pdev->dev, "Card%d rejected load header:\n"
@@ -1787,8 +1796,10 @@ static int __devinit load_firmware(struc
udelay(50); /* 0x0f */
- if (WaitTillCardIsFree(base))
+ if (WaitTillCardIsFree(base)) {
+ dev_err(&pdev->dev, "Card is not free: %u\n", __LINE__);
goto errrelfw;
+ }
if ((status = inw(base + 0x4)) != 0) {
dev_err(&pdev->dev, "Card%d got out of sync.Card "
@@ -1796,8 +1807,9 @@ static int __devinit load_firmware(struc
goto errrelfw;
}
}
-
- retval = -EIO;
+ dev_info(&pdev->dev, "Firmware loaded, last values: \n\tWC: %u, "
+ "FD: %p, FP: %p\n",
+ word_count, fw->data, frame);
if (WaitTillCardIsFree(base))
goto errrelfw;
@@ -1811,24 +1823,29 @@ static int __devinit load_firmware(struc
/* XXX: should we test it by reading it back and comparing with original like
* in load firmware package? */
- for (frame = (struct stframe*)fw->data;
- frame < (struct stframe*)(fw->data + fw->size);
- frame++) {
- if (WaitTillCardIsFree(base))
+ for (frame = (struct stframe *)fw->data;
+ frame < (struct stframe *)(fw->data + fw->size);
+ frame = (struct stframe *)((u8 *)frame + 4 +
+ frame->count)) {
+ if (WaitTillCardIsFree(base)) {
+ dev_err(&pdev->dev, "Card is not free: %u\n", __LINE__);
goto errrelfw;
+ }
outw(0xf1, base); /* start download sequence */
outw(0x00, base);
outw(frame->addr, base); /* lsb of address */
- word_count = (frame->count >> 1) + frame->count % 2;
+ word_count = frame->count / 2 + frame->count % 2;
outw(word_count + 1, base);
InterruptTheCard(base);
udelay(50); /* 0xf */
- if (WaitTillCardIsFree(base))
+ if (WaitTillCardIsFree(base)) {
+ dev_err(&pdev->dev, "Card is not free: %u\n", __LINE__);
goto errrelfw;
+ }
if ((status = inw(base + 0x4)) != 0) {
dev_warn(&pdev->dev, "Card%d rejected verify header:\n"
@@ -1853,8 +1870,10 @@ static int __devinit load_firmware(struc
udelay(50); /* 0xf */
- if (WaitTillCardIsFree(base))
+ if (WaitTillCardIsFree(base)) {
+ dev_err(&pdev->dev, "Card is not free: %u\n", __LINE__);
goto errrelfw;
+ }
if ((status = inw(base + 0x4)) != 0) {
dev_err(&pdev->dev, "Card%d verify got out of sync. "
next prev parent reply other threads:[~2006-09-13 15:34 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-09-12 16:05 isicom module oops 2.6.17.13 Steve Roemen
2006-09-12 21:53 ` Jiri Slaby
2006-09-13 15:14 ` Steve Roemen
2006-09-13 15:34 ` Jiri Slaby [this message]
2006-09-13 16:44 ` Steve Roemen
2006-09-13 22:29 ` Jiri Slaby
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=45082055.7010309.reply@wsc.cz \
--to=jirislaby@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stever@carlislefsp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox