From: Steve Roemen <stever@carlislefsp.com>
To: Jiri Slaby <jirislaby@gmail.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re: isicom module oops 2.6.17.13
Date: Wed, 13 Sep 2006 11:44:55 -0500 [thread overview]
Message-ID: <45083587.50908@carlislefsp.com> (raw)
In-Reply-To: <45082055.7010309.reply@wsc.cz>
here's with the firmware in the (converted to .deb rpm from
ftp://ftp.linux.org.uk/pub/linux/alan/Kernel/Drivers/ISI/ )
isicom 0000:00:10.0: ISI PCI Card(Device ID 0x2052)
isicom 0000:00:10.0: -Done
isicom 0000:00:10.0: Firmware requested, size: 6553
isicom 0000:00:10.0: Firmware loaded, last values:
WC: 5, FD: e09cc000, FP: e09cd999
isicom 0000:00:10.0: Card is not free: 1836
isicom: probe of 0000:00:10.0 failed with error -5
here's with the firmware from ftp://ftp.multitech.com/isi-cards/linux/
l309_22x_24x.tar
isicom 0000:00:10.0: ISI PCI Card(Device ID 0x2052)
isicom 0000:00:10.0: -Done
isicom 0000:00:10.0: Firmware requested, size: 7325
isicom 0000:00:10.0: Firmware loaded, last values:
WC: 1, FD: e09cc000, FP: e09cdc9d
isicom 0000:00:10.0: Card is not free: 1836
isicom: probe of 0000:00:10.0 failed with error -5
Steve
Jiri Slaby wrote:
> Steve Roemen wrote:
>
>> after adding that patch to 2.6.18-rc6-mm2 and trying another card (an
>> isi5634 pci/8) i get this in dmesg while loading the driver:
>>
>> faxserver2:~# modprobe isicom
>> faxserver2:~# cat /var/log/kern.log
>>
>> Sep 13 09:59:11 localhost kernel: isicom 0000:00:10.0: ISI PCI
>> Card(Device ID 0x2052)
>> Sep 13 09:59:14 localhost kernel: isicom 0000:00:10.0: -Done
>> Sep 13 09:59:15 localhost kernel: 00, FP: e09c762c
>> Sep 13 09:59:15 localhost kernel: isicom 0000:00:10.0: WC: 8, FC: 16,
>> FD: e09c7000, FP: e09c7640
>> Sep 13 09:59:15 localhost kernel: isicom 0000:00:10.0: WC: 8, FC: 16,
>> FD: e09c7000, FP: e09c7654
>>
>
> [snip]
>
>
>> Sep 13 09:59:15 localhost kernel: isicom 0000:00:10.0: WC: 8, FC: 16,
>> FD: e09c7000, FP: e09c8964
>> Sep 13 09:59:15 localhost kernel: isicom 0000:00:10.0: WC: 8, FC: 16,
>> FD: e09c7000, FP: e09c8978
>> Sep 13 09:59:15 localhost kernel: isicom 0000:00:10.0: WC: 5, FC: 9, FD:
>> e09c7000, FP: e09c898c
>> Sep 13 09:59:17 localhost kernel: isicom: probe of 0000:00:10.0 failed
>> with error -5
>>
>
> Yes, thanks a lot, but more diagnostics is needed and I forgot to correct for
> loop for checking uploaded firmware...
> Could you revert previous patch and apply this one, please?
>
> diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c
> index 6cca4b2..bf371b0 100644
> --- a/drivers/char/isicom.c
> +++ b/drivers/char/isicom.c
> @@ -1756,11 +1756,18 @@ static int __devinit load_firmware(struc
> if (retval)
> goto end;
>
> + dev_info(&pdev->dev, "Firmware requested, size: %u\n", fw->size);
> +
> + retval = -EIO;
> +
> for (frame = (struct stframe *)fw->data;
> frame < (struct stframe *)(fw->data + fw->size);
> - frame++) {
> - if (WaitTillCardIsFree(base))
> + frame = (struct stframe *)((u8 *)frame + 4 +
> + frame->count)) {
> + if (WaitTillCardIsFree(base)) {
> + dev_err(&pdev->dev, "Card is not free: %u\n", __LINE__);
> goto errrelfw;
> + }
>
> outw(0xf0, base); /* start upload sequence */
> outw(0x00, base);
> @@ -1772,8 +1779,10 @@ static int __devinit load_firmware(struc
>
> udelay(100); /* 0x2f */
>
> - if (WaitTillCardIsFree(base))
> + if (WaitTillCardIsFree(base)) {
> + dev_err(&pdev->dev, "Card is not free: %u\n", __LINE__);
> goto errrelfw;
> + }
>
> if ((status = inw(base + 0x4)) != 0) {
> dev_warn(&pdev->dev, "Card%d rejected load header:\n"
> @@ -1787,8 +1796,10 @@ static int __devinit load_firmware(struc
>
> udelay(50); /* 0x0f */
>
> - if (WaitTillCardIsFree(base))
> + if (WaitTillCardIsFree(base)) {
> + dev_err(&pdev->dev, "Card is not free: %u\n", __LINE__);
> goto errrelfw;
> + }
>
> if ((status = inw(base + 0x4)) != 0) {
> dev_err(&pdev->dev, "Card%d got out of sync.Card "
> @@ -1796,8 +1807,9 @@ static int __devinit load_firmware(struc
> goto errrelfw;
> }
> }
> -
> - retval = -EIO;
> + dev_info(&pdev->dev, "Firmware loaded, last values: \n\tWC: %u, "
> + "FD: %p, FP: %p\n",
> + word_count, fw->data, frame);
>
> if (WaitTillCardIsFree(base))
> goto errrelfw;
> @@ -1811,24 +1823,29 @@ static int __devinit load_firmware(struc
>
> /* XXX: should we test it by reading it back and comparing with original like
> * in load firmware package? */
> - for (frame = (struct stframe*)fw->data;
> - frame < (struct stframe*)(fw->data + fw->size);
> - frame++) {
> - if (WaitTillCardIsFree(base))
> + for (frame = (struct stframe *)fw->data;
> + frame < (struct stframe *)(fw->data + fw->size);
> + frame = (struct stframe *)((u8 *)frame + 4 +
> + frame->count)) {
> + if (WaitTillCardIsFree(base)) {
> + dev_err(&pdev->dev, "Card is not free: %u\n", __LINE__);
> goto errrelfw;
> + }
>
> outw(0xf1, base); /* start download sequence */
> outw(0x00, base);
> outw(frame->addr, base); /* lsb of address */
>
> - word_count = (frame->count >> 1) + frame->count % 2;
> + word_count = frame->count / 2 + frame->count % 2;
> outw(word_count + 1, base);
> InterruptTheCard(base);
>
> udelay(50); /* 0xf */
>
> - if (WaitTillCardIsFree(base))
> + if (WaitTillCardIsFree(base)) {
> + dev_err(&pdev->dev, "Card is not free: %u\n", __LINE__);
> goto errrelfw;
> + }
>
> if ((status = inw(base + 0x4)) != 0) {
> dev_warn(&pdev->dev, "Card%d rejected verify header:\n"
> @@ -1853,8 +1870,10 @@ static int __devinit load_firmware(struc
>
> udelay(50); /* 0xf */
>
> - if (WaitTillCardIsFree(base))
> + if (WaitTillCardIsFree(base)) {
> + dev_err(&pdev->dev, "Card is not free: %u\n", __LINE__);
> goto errrelfw;
> + }
>
> if ((status = inw(base + 0x4)) != 0) {
> dev_err(&pdev->dev, "Card%d verify got out of sync. "
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
next prev parent reply other threads:[~2006-09-13 16:45 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-09-12 16:05 isicom module oops 2.6.17.13 Steve Roemen
2006-09-12 21:53 ` Jiri Slaby
2006-09-13 15:14 ` Steve Roemen
2006-09-13 15:34 ` Jiri Slaby
2006-09-13 16:44 ` Steve Roemen [this message]
2006-09-13 22:29 ` Jiri Slaby
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=45083587.50908@carlislefsp.com \
--to=stever@carlislefsp.com \
--cc=jirislaby@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox