* [PATCH] [V4L] Support for SAA7134-based AVerTV Hybrid A16AR
@ 2006-09-23 0:12 Petr Baudis
2006-09-23 5:30 ` Andrew Morton
2006-09-24 22:20 ` Hartmut Hackmann
0 siblings, 2 replies; 3+ messages in thread
From: Petr Baudis @ 2006-09-23 0:12 UTC (permalink / raw)
To: video4linux-list; +Cc: linux-kernel
This adds support for a hybrid PAL/DVB/FM card. Unfortunately I tested
only the DVB since I don't have any proper antenna available and I can
receive even the DVB just barely so; I can hear noise in the FM part
but I couldn't catch any station, then again I don't have an FM antenna
either.
The PAL/FM and IR control data are based on what I harvested on the 'net.
Perhaps I or someone else will fix them if they turn out to be wrong.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
---
The patch is against linux-2.6.18.
Documentation/video4linux/CARDLIST.saa7134 | 1 +
drivers/media/video/saa7134/saa7134-cards.c | 36 +++++++++++++++++++++++++++
drivers/media/video/saa7134/saa7134-dvb.c | 1 +
drivers/media/video/saa7134/saa7134-input.c | 1 +
drivers/media/video/saa7134/saa7134.h | 1 +
5 files changed, 40 insertions(+), 0 deletions(-)
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index 9068b66..52ab9a0 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -94,3 +94,4 @@
93 -> Medion 7134 Bridge #2 [16be:0005]
94 -> LifeView FlyDVB-T Hybrid Cardbus [5168:3306,5168:3502]
95 -> LifeView FlyVIDEO3000 (NTSC) [5169:0138]
+ 96 -> AVerTV Hybrid A16AR [1461:2c00]
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index 927413a..a9a322f 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -2891,6 +2891,35 @@ struct saa7134_board saa7134_boards[] =
.gpio = 0x8000,
},
},
+ [SAA7134_BOARD_AVERMEDIA_A16AR] = {
+ /* Petr Baudis <pasky@ucw.cz> */
+ .name = "AVerMedia TV Hybrid A16AR",
+ .audio_clock = 0x187de7,
+ .tuner_type = TUNER_PHILIPS_TDA8290, /* untested */
+ .radio_type = TUNER_TEA5767, /* untested */
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .tda9887_conf = TDA9887_PRESENT,
+ .mpeg = SAA7134_MPEG_DVB,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ },{
+ .name = name_comp1,
+ .vmux = 3,
+ .amux = LINE2,
+ },{
+ .name = name_svideo,
+ .vmux = 8,
+ .amux = LINE1,
+ }},
+ .radio = {
+ .name = name_radio,
+ .amux = LINE1,
+ },
+ },
};
const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
@@ -3446,6 +3475,12 @@ struct pci_device_id saa7134_pci_tbl[] =
.subdevice = 0x3502, /* whats the difference to 0x3306 ?*/
.driver_data = SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS,
},{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7134,
+ .subvendor = 0x1461,
+ .subdevice = 0x2c00,
+ .driver_data = SAA7134_BOARD_AVERMEDIA_A16AR,
+ },{
/* --- boards without eeprom + subsystem ID --- */
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7134,
@@ -3581,6 +3616,7 @@ int saa7134_board_init1(struct saa7134_d
saa_writeb(SAA7134_GPIO_GPMODE3, 0x08);
saa_writeb(SAA7134_GPIO_GPSTATUS3, 0x00);
break;
+ case SAA7134_BOARD_AVERMEDIA_A16AR:
case SAA7134_BOARD_AVERMEDIA_CARDBUS:
/* power-up tuner chip */
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0xffffffff, 0xffffffff);
diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index 279828b..5339c99 100644
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -1020,6 +1020,7 @@ #ifdef HAVE_MT352
break;
case SAA7134_BOARD_AVERMEDIA_777:
+ case SAA7134_BOARD_AVERMEDIA_A16AR:
printk("%s: avertv 777 dvb setup\n",dev->name);
dev->dvb.frontend = mt352_attach(&avermedia_777,
&dev->i2c_adap);
diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index 7c59549..1f51c04 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -185,6 +185,7 @@ int saa7134_input_init1(struct saa7134_d
case SAA7134_BOARD_AVERMEDIA_STUDIO_305:
case SAA7134_BOARD_AVERMEDIA_STUDIO_307:
case SAA7134_BOARD_AVERMEDIA_GO_007_FM:
+ case SAA7134_BOARD_AVERMEDIA_A16AR:
ir_codes = ir_codes_avermedia;
mask_keycode = 0x0007C8;
mask_keydown = 0x000010;
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index c04ce61..9564190 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -223,6 +223,7 @@ #define SAA7134_BOARD_AVERMEDIA_A169_B1
#define SAA7134_BOARD_MD7134_BRIDGE_2 93
#define SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS 94
#define SAA7134_BOARD_FLYVIDEO3000_NTSC 95
+#define SAA7134_BOARD_AVERMEDIA_A16AR 96
#define SAA7134_MAXBOARDS 8
#define SAA7134_INPUT_MAX 8
--
Petr "Pasky" Baudis
Stuff: http://pasky.or.cz/
#!/bin/perl -sp0777i<X+d*lMLa^*lN%0]dsXx++lMlN/dsM0<j]dsj
$/=unpack('H*',$_);$_=`echo 16dio\U$k"SK$/SM$n\EsN0p[lN*1
lK[d2%Sa2/d0$^Ixp"|dc`;s/\W//g;$_=pack('H*',/((..)*)$/)
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] [V4L] Support for SAA7134-based AVerTV Hybrid A16AR
2006-09-23 0:12 [PATCH] [V4L] Support for SAA7134-based AVerTV Hybrid A16AR Petr Baudis
@ 2006-09-23 5:30 ` Andrew Morton
2006-09-24 22:20 ` Hartmut Hackmann
1 sibling, 0 replies; 3+ messages in thread
From: Andrew Morton @ 2006-09-23 5:30 UTC (permalink / raw)
To: Petr Baudis; +Cc: video4linux-list, linux-kernel
On Sat, 23 Sep 2006 02:12:46 +0200
Petr Baudis <pasky@ucw.cz> wrote:
> This adds support for a hybrid PAL/DVB/FM card. Unfortunately I tested
> only the DVB since I don't have any proper antenna available and I can
> receive even the DVB just barely so; I can hear noise in the FM part
> but I couldn't catch any station, then again I don't have an FM antenna
> either.
>
> The PAL/FM and IR control data are based on what I harvested on the 'net.
> Perhaps I or someone else will fix them if they turn out to be wrong.
>
> ...
>
> The patch is against linux-2.6.18.
2.6.18 is ancient ;)
There have been two new cards adding in the DVB git tree. It looks like
you got #96.
diff -puN Documentation/video4linux/CARDLIST.saa7134~v4l-support-for-saa7134-based-avertv-hybrid-a16ar Documentation/video4linux/CARDLIST.saa7134
--- a/Documentation/video4linux/CARDLIST.saa7134~v4l-support-for-saa7134-based-avertv-hybrid-a16ar
+++ a/Documentation/video4linux/CARDLIST.saa7134
@@ -96,3 +96,4 @@
95 -> LifeView FlyVIDEO3000 (NTSC) [5169:0138]
96 -> Medion Md8800 Quadro [16be:0007,16be:0008]
97 -> LifeView FlyDVB-S /Acorp TV134DS [5168:0300,4e42:0300]
+ 98 -> AVerTV Hybrid A16AR [1461:2c00]
diff -puN drivers/media/video/saa7134/saa7134-cards.c~v4l-support-for-saa7134-based-avertv-hybrid-a16ar drivers/media/video/saa7134/saa7134-cards.c
--- a/drivers/media/video/saa7134/saa7134-cards.c~v4l-support-for-saa7134-based-avertv-hybrid-a16ar
+++ a/drivers/media/video/saa7134/saa7134-cards.c
@@ -2934,7 +2934,35 @@ struct saa7134_board saa7134_boards[] =
.amux = LINE1,
}},
},
-
+ [SAA7134_BOARD_AVERMEDIA_A16AR] = {
+ /* Petr Baudis <pasky@ucw.cz> */
+ .name = "AVerMedia TV Hybrid A16AR",
+ .audio_clock = 0x187de7,
+ .tuner_type = TUNER_PHILIPS_TDA8290, /* untested */
+ .radio_type = TUNER_TEA5767, /* untested */
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .tda9887_conf = TDA9887_PRESENT,
+ .mpeg = SAA7134_MPEG_DVB,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ },{
+ .name = name_comp1,
+ .vmux = 3,
+ .amux = LINE2,
+ },{
+ .name = name_svideo,
+ .vmux = 8,
+ .amux = LINE1,
+ }},
+ .radio = {
+ .name = name_radio,
+ .amux = LINE1,
+ },
+ },
};
const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
@@ -3526,6 +3554,12 @@ struct pci_device_id saa7134_pci_tbl[] =
.subdevice = 0x0502, /* Cardbus version */
.driver_data = SAA7134_BOARD_FLYDVBT_DUO_CARDBUS,
},{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7134,
+ .subvendor = 0x1461,
+ .subdevice = 0x2c00,
+ .driver_data = SAA7134_BOARD_AVERMEDIA_A16AR,
+ },{
/* --- boards without eeprom + subsystem ID --- */
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7134,
@@ -3666,6 +3700,7 @@ int saa7134_board_init1(struct saa7134_d
saa_writeb(SAA7134_GPIO_GPMODE3, 0x08);
saa_writeb(SAA7134_GPIO_GPSTATUS3, 0x00);
break;
+ case SAA7134_BOARD_AVERMEDIA_A16AR:
case SAA7134_BOARD_AVERMEDIA_CARDBUS:
/* power-up tuner chip */
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0xffffffff, 0xffffffff);
diff -puN drivers/media/video/saa7134/saa7134-dvb.c~v4l-support-for-saa7134-based-avertv-hybrid-a16ar drivers/media/video/saa7134/saa7134-dvb.c
--- a/drivers/media/video/saa7134/saa7134-dvb.c~v4l-support-for-saa7134-based-avertv-hybrid-a16ar
+++ a/drivers/media/video/saa7134/saa7134-dvb.c
@@ -1055,6 +1055,7 @@ static int dvb_init(struct saa7134_dev *
}
break;
case SAA7134_BOARD_AVERMEDIA_777:
+ case SAA7134_BOARD_AVERMEDIA_A16AR:
printk("%s: avertv 777 dvb setup\n",dev->name);
dev->dvb.frontend = dvb_attach(mt352_attach, &avermedia_777,
&dev->i2c_adap);
diff -puN drivers/media/video/saa7134/saa7134.h~v4l-support-for-saa7134-based-avertv-hybrid-a16ar drivers/media/video/saa7134/saa7134.h
--- a/drivers/media/video/saa7134/saa7134.h~v4l-support-for-saa7134-based-avertv-hybrid-a16ar
+++ a/drivers/media/video/saa7134/saa7134.h
@@ -225,6 +225,7 @@ struct saa7134_format {
#define SAA7134_BOARD_FLYVIDEO3000_NTSC 95
#define SAA7134_BOARD_MEDION_MD8800_QUADRO 96
#define SAA7134_BOARD_FLYDVBS_LR300 97
+#define SAA7134_BOARD_AVERMEDIA_A16AR 98
#define SAA7134_MAXBOARDS 8
#define SAA7134_INPUT_MAX 8
diff -puN drivers/media/video/saa7134/saa7134-input.c~v4l-support-for-saa7134-based-avertv-hybrid-a16ar drivers/media/video/saa7134/saa7134-input.c
--- a/drivers/media/video/saa7134/saa7134-input.c~v4l-support-for-saa7134-based-avertv-hybrid-a16ar
+++ a/drivers/media/video/saa7134/saa7134-input.c
@@ -185,6 +185,7 @@ int saa7134_input_init1(struct saa7134_d
case SAA7134_BOARD_AVERMEDIA_STUDIO_305:
case SAA7134_BOARD_AVERMEDIA_STUDIO_307:
case SAA7134_BOARD_AVERMEDIA_GO_007_FM:
+ case SAA7134_BOARD_AVERMEDIA_A16AR:
ir_codes = ir_codes_avermedia;
mask_keycode = 0x0007C8;
mask_keydown = 0x000010;
_
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] [V4L] Support for SAA7134-based AVerTV Hybrid A16AR
2006-09-23 0:12 [PATCH] [V4L] Support for SAA7134-based AVerTV Hybrid A16AR Petr Baudis
2006-09-23 5:30 ` Andrew Morton
@ 2006-09-24 22:20 ` Hartmut Hackmann
1 sibling, 0 replies; 3+ messages in thread
From: Hartmut Hackmann @ 2006-09-24 22:20 UTC (permalink / raw)
To: Linux and Kernel Video; +Cc: linux-kernel
Hi, Petr
Petr Baudis wrote:
> This adds support for a hybrid PAL/DVB/FM card. Unfortunately I tested
> only the DVB since I don't have any proper antenna available and I can
> receive even the DVB just barely so; I can hear noise in the FM part
> but I couldn't catch any station, then again I don't have an FM antenna
> either.
>
> The PAL/FM and IR control data are based on what I harvested on the 'net.
> Perhaps I or someone else will fix them if they turn out to be wrong.
>
I am in doubt about some parts of your patch. Can you please check?
> Signed-off-by: Petr Baudis <pasky@ucw.cz>
> ---
>
> The patch is against linux-2.6.18.
>
> Documentation/video4linux/CARDLIST.saa7134 | 1 +
> drivers/media/video/saa7134/saa7134-cards.c | 36 +++++++++++++++++++++++++++
> drivers/media/video/saa7134/saa7134-dvb.c | 1 +
> drivers/media/video/saa7134/saa7134-input.c | 1 +
> drivers/media/video/saa7134/saa7134.h | 1 +
> 5 files changed, 40 insertions(+), 0 deletions(-)
>
> diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
> index 9068b66..52ab9a0 100644
> --- a/Documentation/video4linux/CARDLIST.saa7134
> +++ b/Documentation/video4linux/CARDLIST.saa7134
> @@ -94,3 +94,4 @@
> 93 -> Medion 7134 Bridge #2 [16be:0005]
> 94 -> LifeView FlyDVB-T Hybrid Cardbus [5168:3306,5168:3502]
> 95 -> LifeView FlyVIDEO3000 (NTSC) [5169:0138]
> + 96 -> AVerTV Hybrid A16AR [1461:2c00]
> diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
> index 927413a..a9a322f 100644
> --- a/drivers/media/video/saa7134/saa7134-cards.c
> +++ b/drivers/media/video/saa7134/saa7134-cards.c
> @@ -2891,6 +2891,35 @@ struct saa7134_board saa7134_boards[] =
> .gpio = 0x8000,
> },
> },
> + [SAA7134_BOARD_AVERMEDIA_A16AR] = {
> + /* Petr Baudis <pasky@ucw.cz> */
> + .name = "AVerMedia TV Hybrid A16AR",
> + .audio_clock = 0x187de7,
> + .tuner_type = TUNER_PHILIPS_TDA8290, /* untested */
> + .radio_type = TUNER_TEA5767, /* untested */
> + .tuner_addr = ADDR_UNSET,
> + .radio_addr = ADDR_UNSET,
> + .tda9887_conf = TDA9887_PRESENT,
If there is a TDA8290, there can't be a TDA9887. The tuner is a TD1316?
In this case, TUNER_PHILIPS_TD1316 is right.
> + .mpeg = SAA7134_MPEG_DVB,
> + .inputs = {{
> + .name = name_tv,
> + .vmux = 1,
> + .amux = TV,
> + .tv = 1,
> + },{
> + .name = name_comp1,
> + .vmux = 3,
> + .amux = LINE2,
> + },{
> + .name = name_svideo,
> + .vmux = 8,
> + .amux = LINE1,
> + }},
> + .radio = {
> + .name = name_radio,
> + .amux = LINE1,
> + },
> + },
> };
>
> const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
> @@ -3446,6 +3475,12 @@ struct pci_device_id saa7134_pci_tbl[] =
> .subdevice = 0x3502, /* whats the difference to 0x3306 ?*/
> .driver_data = SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS,
> },{
> + .vendor = PCI_VENDOR_ID_PHILIPS,
> + .device = PCI_DEVICE_ID_PHILIPS_SAA7134,
> + .subvendor = 0x1461,
> + .subdevice = 0x2c00,
> + .driver_data = SAA7134_BOARD_AVERMEDIA_A16AR,
> + },{
> /* --- boards without eeprom + subsystem ID --- */
> .vendor = PCI_VENDOR_ID_PHILIPS,
> .device = PCI_DEVICE_ID_PHILIPS_SAA7134,
> @@ -3581,6 +3616,7 @@ int saa7134_board_init1(struct saa7134_d
> saa_writeb(SAA7134_GPIO_GPMODE3, 0x08);
> saa_writeb(SAA7134_GPIO_GPSTATUS3, 0x00);
> break;
> + case SAA7134_BOARD_AVERMEDIA_A16AR:
> case SAA7134_BOARD_AVERMEDIA_CARDBUS:
> /* power-up tuner chip */
> saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0xffffffff, 0xffffffff);
This sets all GPIOs to output mode. Is that necessary?
> diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
> index 279828b..5339c99 100644
> --- a/drivers/media/video/saa7134/saa7134-dvb.c
> +++ b/drivers/media/video/saa7134/saa7134-dvb.c
> @@ -1020,6 +1020,7 @@ #ifdef HAVE_MT352
> break;
>
> case SAA7134_BOARD_AVERMEDIA_777:
> + case SAA7134_BOARD_AVERMEDIA_A16AR:
> printk("%s: avertv 777 dvb setup\n",dev->name);
> dev->dvb.frontend = mt352_attach(&avermedia_777,
> &dev->i2c_adap);
> diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
> index 7c59549..1f51c04 100644
> --- a/drivers/media/video/saa7134/saa7134-input.c
> +++ b/drivers/media/video/saa7134/saa7134-input.c
> @@ -185,6 +185,7 @@ int saa7134_input_init1(struct saa7134_d
> case SAA7134_BOARD_AVERMEDIA_STUDIO_305:
> case SAA7134_BOARD_AVERMEDIA_STUDIO_307:
> case SAA7134_BOARD_AVERMEDIA_GO_007_FM:
> + case SAA7134_BOARD_AVERMEDIA_A16AR:
> ir_codes = ir_codes_avermedia;
> mask_keycode = 0x0007C8;
> mask_keydown = 0x000010;
> diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
> index c04ce61..9564190 100644
> --- a/drivers/media/video/saa7134/saa7134.h
> +++ b/drivers/media/video/saa7134/saa7134.h
> @@ -223,6 +223,7 @@ #define SAA7134_BOARD_AVERMEDIA_A169_B1
> #define SAA7134_BOARD_MD7134_BRIDGE_2 93
> #define SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS 94
> #define SAA7134_BOARD_FLYVIDEO3000_NTSC 95
> +#define SAA7134_BOARD_AVERMEDIA_A16AR 96
>
> #define SAA7134_MAXBOARDS 8
> #define SAA7134_INPUT_MAX 8
>
>
Best regards
Hartmut
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2006-09-24 22:20 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-09-23 0:12 [PATCH] [V4L] Support for SAA7134-based AVerTV Hybrid A16AR Petr Baudis
2006-09-23 5:30 ` Andrew Morton
2006-09-24 22:20 ` Hartmut Hackmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox