Re: Question on HDLC and raw access to T1/E1 serial streams.

[Ben Greear <greearb@candelatech.com>]

Lennart Sorensen wrote:
> On Tue, Oct 03, 2006 at 09:27:58PM -0700, Ben Greear wrote:
>   
>> I think you might be right.  It will take some more experimenting to see 
>> if they allow
>> enough control to read/write bitstreams (clear channel groups in their 
>> terminology, I believe) while at
>> the same time keeping the timing slots in order...
>>     
>
> Sangoma also makes cards with linux drivers, which I suspect will let
> you at the low levels if you want to.  They certainly support zaptel
> stuff on their cards.  Their hardware is also quite a bit cheaper than
> farsite's in my experience.
>   
Sangoma's NICs used to work for me..but it seems their latest drivers 
broke the
support that I need.  I think there aren't too many people interested in 
bit-streaming, so
the feature probably doesn't get tested that often...  If I can get the 
digium hardware to
work with a particular zaptel.conf, then I can try Sangoma and see if it 
will work when
configured in that same manner...

Thanks,
Ben

> --
> Len Sorensen
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>   


-- 
Ben Greear <greearb@candelatech.com> 
Candela Technologies Inc  http://www.candelatech.com