Re: DVD drive not recognized on Intel G965 (2.6.19-rc2)

[Robert Hancock <hancockr@shaw.ca>]

Ryan Richter wrote:
> On Wed, Oct 18, 2006 at 12:26:25AM +0100, Alan Cox wrote:
>> Ar Maw, 2006-10-17 am 18:23 -0400, ysgrifennodd Ryan Richter:
>>> 02:00.0 IDE interface: Marvell Technology Group Ltd. Unknown device 6101 (rev b1) (prog-if 8f [Master SecP SecO PriP PriO])
>>> 	Subsystem: Marvell Technology Group Ltd. Unknown device 6101
>> That should work with libata and the newest driver version I posted (the
>> earlier one won't handle the 6101 just 6145). You need at least rev
>> 0.0.4t.
> 
> OK, now it's doing a little better.  It seems to recognize the
> controller and drive, but it's not getting assigned a /dev/[sh]d? device
> (it doesn't show up in /proc/diskstats, e.g.).  Here's the relevant
> portion of dmesg:
> 
> 
> ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
> PCI: Setting latency timer of device 0000:02:00.0 to 64
> ata5: PATA max UDMA/100 cmd 0x1018 ctl 0x1026 bmdma 0x1000 irq 17
> scsi4 : pata_marvell
> BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:01 0D:00 0E:00 0F:00 
> ata5.00: ATAPI, max UDMA/33
> ata5.00: applying bridge limits
> ata5.00: configured for UDMA/33
> scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-H10N  JL10 PQ: 0 ANSI: 5
> scsi 4:0:0:0: Attached scsi generic sg0 type 5

Is the sr driver compiled in/loaded? The drive will show up as something 
like /dev/sr0 or /dev/scd0, depending on distribution.

-- 
Robert Hancock      Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@nospamshaw.ca
Home Page: http://www.roberthancock.com/